1
2
the higher velocity.
or turn on
and it will be the calculagraph.
IC
9.Current Temp/Timer set Display
When machine is running,it displays the current temperature. Press the"Timer" button to set the machine to shut off or turn on automatically after a specified amount of time, it will be the calculagraph.
10. Current Humidity/Setting himidity Display
It can display the current himidity. If you press the "Adjust himidity" button, the screen will show the
himidity you set and be back to show the ambient himidity 5 seconds later. |
|
Setting himidity range:40%RH~70%RH |
|
Display himidity range:(LO)30%RH~(HI)90%RH |
3 |
|
4
When you use the new model the first time, if the "BUCKET FULL"light hithlights, then you can take the bucket out and put it in again, the light will die.
5
When the ambient temperature is above 122F or below 32F, the model will restart after shutting off 3 minutes in order to protect the compressor.
6