Groen PT General Manual
Direct Steam Kettle
Description
Kettle shall be Groen Model PT (specify 20, 40, 60, 80,
100, 125 or 150-gallon) stainless steel, 2/3 jacketed unit
operation from direct steam.
Construction
Kettle shall be of type 316 stainless steel, with solid onepiece welded construction. Unit shall be provided with a
heavy, durable bar rim with a continuous seal weld on the
underside to ensure maximum durability and sanitation.
Unit provided with faucet bracket as standard.
Finish
Interior of kettle shall be polished to a 180 emery grit finish. Exterior of kettle shall be finished to a bright high buff
finish, ensuring maximum ease in cleaning and maintaining brilliant appearance.
ASME Code
Unit shall be ASME shop inspected, stamped and registered with the National Board for operation up to a
maximum working pressure of 25 PSI.
Sanitation
Unit shall be designed and constructed to meet NSF and
known health department and sanitation codes, and be
NSF listed.
Drawoff
Unit shall have a 2” sanitary tangent drawoff which is a
316 stainless steel compression disc drain valve, for easy
disassembly without tools. Larger 3” drawoff available.
The drain outlet shall be equipped with a removable 1/4”
perforated stainless steel strainer.
Cover
Cover furnished on 40-gallon and smaller units shall be
hinged dome one-piece cover. 60 to 150-gallon units
shall be furnished with No. 51 counterbalanced actuator, designed to maintain the cover in an open or closed
position.
Steam Pressure
Kettle shall operate dependably at any steam pressure
between 5 and 25 PSI. Higher working pressure available.
Mounting
Unit shall be mounted on an all stainless steel pedestal
base, with the outer circumference of the pedestal
flanged down vertically to ensure proper sealing to the
floor or deck.
model PT
Model PT-40 shown
Installation
Remote steam source required. Steam trap assembly is
required and not provided unless ordered as an option.
See dimension R on other side for steam inlet size and
number.
Options/Accessories
Basket inserts (TRI-BC)
Single pantry water faucet
Double pantry water faucet
Higher working pressure
3” tangent drawoff
1/8” perforated disc strainer
1/4” perforated disk strainer
Solid disc strainer
Cold water jacket cooling
Steam trap assemblies
Kettle brush kit
Steam regulators
Contour measuring strip
Gallon etch marks
Origin of Manufacture
Kettle shall be designed and manufactured in the United
States.
Stainless Steel
2/3 Steam Jacketed Kettle
Pedestal Mounted
Stationary
Direct Steam
20 to 150-Gallon
Capacities
Short Form
Groen Model PT (specify
gallons) stainless steel, 2/3
jacketed, direct steam unit.
Solid one-piece welded
construction with heavy duty
reinforced bar rim. 2” sanitary
tangent drawoff standard.
20- and 40-gallon units
filled with one-piece hinged
dome cover. NSF listed,
ASME code constructed for
25 PSI. Unit mounted on all
stainless steel pedestal with
outer circumference flanged
vertically to ensure sealing to
floor or deck. Steam trap
assembly and direct steam
source required. Made in
U.S.A.
Applications
Wet roasting meats
Soups
Stews
Stocks
Poultry
Sauces
Pie Fillings
Vegetables
Pasta
Rice
Gravies
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Groen Direct Steam Kettle, Page 1
160168D
Revised 07/10
Model PT
P/N 123000 REV. A
MM
150125
42 1067
INCH
MM
965
INCH
MM
914
100
36
INCH
MM
813
8060
INCHINCH
TABLE OF DIMENSIONS
MM
762 32
30
MM
660
4020
26
INCH
MMDIM.
20 504
INCH
A
GAL.
CAP.
46 1168
1067
424038
1016
40
991
39
914
36
806
31 3/4
667
26 1/4
B
1130
44 1/2
1016
965
38
864
34
813
32
711
2822
559
C
218486210883
1956
771854731702
67
165165149959
D
1219
48
1219
48
1118
44
1092
991 43
39
914
36
36 914
E
305
12
305
12
203
8
203
8
203
8
1787
140
5 1/2
F
445
17 1/2
445
17 1/2
368
14 1/2
368
14 1/2
368
14 1/2
343
13 1/4
12 305
G
298
11 3/4
298
11 3/4
298
11 3/4
298
11 3/4
298
11 3/4
298
11 3/4
400
15 1/2
H
419
16 1/2
406
16
356
14
356
14
343
13 1/2
356
14
17 432
J
362
15 3/4
362
14 1/4
343
13 1/2
311
12 1/4
292
11 1/2
260
10 1/4
203
8
K
45718
445
17 1/2
445
17 1/2
419
16 1/2
413
16 1/4
400
15 3/4
476
18 3/4
L
24 610
610
24
457
18
457
18
457
18
406
16
12 305
M
572
22 1/2
572
22 1/2
419
16 1/2
419
16 1/2
419
16 1/2
368
14 1/2
260
10 1/4
N
19
3/4
19
3/4
19
3/4
19
3/4
13
13
13
P
1/2
1/2
1/2
25
1
25
1
25
25 1
1
19
3/4
19
3/4
13
1/2
R
-
-
-- -
-
-
-
-
-
635
2545718
S
508
20
50820
432
17
432
17
432
17
406
16
14 356
T
273
10 3/4
273
10 3/4
273
10 3/4
273
10 3/4
273
10 3/4
273
10 3/4
375
14 3/4
U
P/N 123000 REV A
T
OPTIONAL 3"
TANGENT DRAWOFF
U
ON KETTLES MEASURING 60 GALS. AND LARGER.
OVER FLOOR SINK FOR PROPER OPERATION.
2. KETTLE MUST BE SECURELY ANCHORED TO THE FLOOR.
1. MODEL #51 COUNTERBALANCED COVER FURNISHED
NOTES:
D
4. DIMENSIONS IN BRACKETS ( ) ARE MM.
3. POSITION CENTER OF TANGENT DRAWOFF SPOUT 4-5"
45°TYP
M
DIA.
(14)
9/16" DIA., (4) HOLES
'R' NPT
STEAM INLET
ASME APPROVED
SAFETY VALVE
RIM
HEIGHT
J
F
6"(152)
G
(114)
4 1/2
6"
OPEN
(152)
H
L
FLOOR SINK
A
K
A
SEE NOTE 3
FINISHED FLOOR
RIGHT SIDE VIEW
4"(102) MIN
FRONT VIEW
S
COVER OPEN
N
DIA.
SECTION A-A
FLOOR MOUNTING
OPTIONAL
FAUCET
B
STRAINER
AND STAY
(REMOVABLE)
FAUCET BRACKET
C
A I.D.
2" DRAWOFF
(51) VALVE
'P' NPT
CONDENSATE
OUTLET
TOP VIEW
OUTLET
'P' NPT
CONDENSATE
NOTE: COVER IS NOT SHOWN IN THIS VIEW
E
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of
Dover Corporation.
Loading...