Goalzero BOULDER 100 User Manual

TM

10 0

GET TO KNOW YOUR GEAR

Front View

Kickstand

2

HOW IT WORKS

Plug the 8mm blue ringed cable into the INPUT port on the Goal Zero Yeti or Sherpa and angle
the Boulder 100 Solar Panel toward the sun with the attached kickstand. You’ll get the best
solar charging experience if you continue to reposition the solar panel throughout the day.

Back View

8mm Output
(for charging & chaining)

3

HOW TO CHAIN

To chain Boulder 100 Solar Panels together, and for Boulder configurations over
150W, you’ll need to purchase a combiner cable from Goal Zero. Give our customer
solutions center a call for help picking the right cable for your setup.

TECHNICAL SPECIFICATIONS

Boulder 100 Solar Panel

Charges the following Approx. Charge time

GOAL ZERO Sherpa 50 3 hrs
GOAL ZERO Sherpa 100 3-4 hrs
GOAL ZERO Yeti 150 3-6 hrs
GOAL ZERO Yeti 400 8-16 hrs
GOAL ZERO Yeti 1400 29-57 hrs

Solar Panel

Rated Power 100W
Open Circuit Voltage 18-22V
Cell Type Monocrystalline

Ports

Solar port (blue, 8mm male) 14-22V, up to 7A (100W max)

General

Weight 20.1 lbs (9.1 kg)
Dimensions 40.0 x 26.75 x 1.75 in (101.6 x 70.0 x 4.4 cm)
Certs
Warranty 12 months

4

FREQUENTLY ASKED QUESTIONS

Q: Are the Boulder Solar Panels waterproof?

A: Yes. The Boulders are designed to withstand the elements, so they’re great for
permanent installations. What you’re recharging from the Boulders is what needs
your help to stay dry, so keep those power packs and power stations covered up and
protected from the dust, rain, and snow.

Q: Can I chain a Boulder 100 with other Boulders?

A: Depends on the panels. Yes, you can chain the Boulder 100 Solar Panel with other
Boulders that have an 8mm input or input connector, like the Boulder 50 or the older
Boulder 30, by inserting the 8mm blue-ringed connector of the Boulder 100 Solar
Panel into the 8mm input of the other Boulder Solar Panel. When chaining Boulder Solar
Panels in configurations over 150W, you’ll need to purchase a combiner cable from Goal
Zero. Give our customer solutions center call to determine the right cable for your setup.

Q: What can I charge directly from the Boulder Solar Panels?

A: All of our Boulder Solar Panels are designed to charge Sherpa Power Packs and Goal
Zero Yeti Portable Power Stations. If you’re looking to recharge things like headlamps,
phones, and other USB devices, check out our foldable Nomad Solar Panels.

Q: How long will it take to charge my Goal Zero Yeti from a Boulder Solar Panel?

A: That depends on a few factors – how big the Yeti is, how big the Boulder is, how
cloudy it is, how hot it is, just to name a few. We’ve created a handy calculator that takes
all of these factors into consideration. Also, great news, all the Yetis allow for something
called “pass-through power”, this means you can be trickle charging your Yeti and using it
to power your gear, all at the same time.

Q: Can I mount the Boulder Solar Panels to my roof?

A: Sure can. We designed the new Boulders to work with traditional z brackets so they’re
easier to install. Pairing a Boulder Solar Panel and Goal Zero Yeti Portable Power Station
for a camper or van? Talk about a match made in heaven.

5

CONOZCA SUS DISPOSITIVOS

Vista frontal

Soporte

6

CÓMO FUNCIONA

Conecte el cable con el anillo azul de 8 mm al puerto de ENTRADA del Yeti o Sherpa de Gobal
Zero y oriente el panel solar Boulder 100 hacia el sol con el soporte. Conseguirá una mejor
carga solar si continúa recolocando el panel solar a lo largo del día.

Vista posterior

Salida de 8 mm
(para la carga y encadenamiento)

7