Giles FSH-2 User Manual

Item No.: ___ _

Quantity: ___________________

Project Name: ___________________

SIS#: ___________________

AIA/CSI#: ___________________

Ventless Hood

Model FSH-2-UV

• The compact and simple design of the ventless hood
eliminates the need for expensive roof modifications
and the hassle of dealing with multiple vendors
supplying separate hood and electrical systems.

• The Giles Ventless Hood ia a one-of-a-kind, type 1,
stainless steel unit, which incorporates our patented
Electrostatic Air Cleaner and patent pending Ultra Violet
light, provides vapor removal requirements for various
models of fryers.

• The fire suppression system used in your Giles
Ventless Hood is an Ansul R-102A fire suppression
system. Final installation, charging and testing of the
system is required to be performed by an authorized
Ansul distributor. Our system contains piping, nozzles
(appliance and plenum), and conduit for routing the
fusible link cable through the hood.

Design Features

Ventless Hood System

ThisVentless Hood consists of a built-in Fire Suppression
System and a Four-stage Air Purification System.

4

1. Stainless Steel Baffle Filter traps large grease particles.

3

2

2. Precipitator Filter (EAC) consists of an ionizer that charges
particles of dirty air allowing them to be collected by an
electrostatic force.

3. Disposable Charcoal Filter helps eliminate odor.

4. Ultra Violet Lamp helps with emission and odor control.

1

Electric Fryer Constrains

The FSH-2 is design specifically for electric fryers. The fryer being place under this hood must meet
the following specifications:

• Maximum electrical input of 20kW

• Maximum cooking surface area of 380 sq. in. [0.245 cu. meter]

• Maximum fry tank capacity of 110 lbs [50 kg]

• Fryer width (left side to right side) from 24” [610 mm] to 10” [254 mm]

Listings

Giles Foodservice Equipment

An ISO 9001 Registered Company

P.O. Box 210247 • 2750 Gunter Park Drive West • Montgomery, AL 36109 USA
Phone [phone] • Fax [phone] • Phone Toll Free 1.800.554.4537
Web Site: www.gilesent.com • Email: [e-mail]

Printed in U.S.A. 06/10/08 Form 64162-B

Ventless Hood

60A RECEPT.
NEMA 15-60R
(SUPPLIED WITH
3 PH ONLY)

APPLIANCE
STAND OFF
IN HOOD

26 7/8
683

24 3/8
619

20 1/4
514

22 3/16
564

24 1/8
613

70 1/8

1781

46 1/8

1172

AIR FLOW

31 7/16
799

31
787

28 1/8
714

3
76

38 1/16

967

88 5/16

2243

7'-5 1/2"

2273

MIN. TO CEILING

AIR FLOW

.XXX = ±.020

SHEET METAL DEPT.

ANGULAR ± 2°

DECIMALS

.XX = ±.031

TITLE:

MONTGOMERY, ALABAMA

RESTRICTED CONFIDENTIAL DOCUMENT

THIS DRAWING AND ALL THE INFORMATION SHOWN HEREON ARE THE
EXCLUSIVE PROPERTY OF GILES ENTERPRISES, INC. AND ARE SUBMITTED ONLY
ONA CONFIDENTIAL BASIS. THE RECIPIENT AGREES NOT TO REPRODUCE THE
DRAWING, TO RETURN IT UPON REQUEST, AND THAT NO DISCLOSURE OF THE
DRAWING OR THE INFORMATION SHOWN HEREON WILL BE MADE TO A THIRD
PARTY WITHOUT THE PRIOR WRITTEN CONSENT OF GILES ENTERPRISES, INC.

3 VIEW, 3-WAY AIR VENT

ENTERPRISES, INC.

SYM.

REVISIONS

DESCRIPTION

RELEASE FOR PRODUCTION

A 02/20/08 CSY ECO1185

FIRE EXTING
MANUAL PULL
CONNECTION

HOOD AND APPLIANCE
INTERLOCK CONNECTION
( 1 PHASE ONLY)

POWER CONNECTION
(HOOD ONLY 1PHASE)
(HOOD AND APPLIANCE 3 PH)

CHANGED TO 3-WAY AIR DIVERTER

B 04/04/08 CSY ECO1190

Model FSH-2

Item No.: ___ _

Quantity: ___________________

Project Name: ___________________

SIS#: ___________________

AIA/CSI#: ___________________

Side

Front

Back

Inches [millimeters]

Specifications

We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements,
additions, or replacements on previously purchased equipment.

Construction:

20Ga to 16Ga Stainless Steel

Dimensions:

Width: 29-11/16” [616 mm]
Depth: 31-1/2” [801 mm]
Height: 88-5/16” [2128 mm]

Ventless Hood:

Exhaust CFM: 510 - 680
Approx. Decibel Level: 65

Electrical Specifications:

Available Voltages: 208/220/240
1 phase - 208/220/240V - 8/8/8 AMPS
(No service cord provided)

Product Designation:

FSH-2 (A through H, see “How to Specify” below)

Shipping Specifications:

Crated Weight: 462 lbs [146 kg]
Crated Cube Size: 35” X 34” X 93” = 49 cu ft

[1067mm X 915mm X 1423mm = 1.4 cu meters]

Accessories Included

Unit is shipped with (1) Baffle Filter, (1) EAC Filter, (1) Charcoal Filter, (1) EAC SoakTank, (1) UV Lamp, and (1) Manual.

How To Specify

Fryer Opening (X)

1.

Specify FSH-2 and fryer opening width (X): Please
allow an approximate 1/8”[3.17] to 1/4” [6.35] larger
opening for fryer clearance.

Letter Designation Opening Width (X)

A 24-1/8 [612.77]
B 20-1/8 [511.18]
C 18-5/8 [473.08]
D 16-1/8 [409.58]
E 15-5/8 [396.88]
F 15-1/8 [384.18]
G 14-1/8 [358.78]
H 10-1/8 [257.18]

Electrical Options

2.

Specify electrical option from the following:

Giles Foodservice Equipment

2750 Gunter Park Drive West • Montgomery, AL 36109 USA
Phone [phone] • Fax [phone] • Phone Toll Free 1.800.554.4537
Web Site: www.gilesent.com • Email: [e-mail]

Voltage Hz Phase

208 60 1
240 60 1
220 50 1

ILS Option (Interlocking Start)

3.

(Please check with your local officials for this requirement) Specify
if your county requires the hood to shut-down if the fryer
underneath is not operating:

ILS (Interlocking Start)

Note: if not specified, non-ILS will be shipped.

Ultimate Ventless Option:

4.

Ultra Violet Light

Accessories*

5.

Specify the part number and quantity of the
following accessory items needed:

Qty

Description Part Number

EAC Filter 20520
Charcoal Filter 30248
UV Lamp 90226

*Additional charges

Shipping

6.

Specify the shipping method

Printed in U.S.A. 06/10/08 Form 64162-B