Page 1
Item No.: ___
Quantity: ___________________
Project Name: ___________________
SIS#: ___________________
AIA/CSI#: ___________________
Giles Xpress-peditor
Model LT-4 Landing Table System
The versatile Xpress-peditor LandingTable System features
a multi-functional piece of foodservice support equipment that
serves various needs in a busy kitchen and serving area.
• Portable Dump Station - easily dump cooked product directly
into a serving/display pan, reduces spillage and waste.
Use as a FIFO rotation system - place pan of fresh cooked
•
product on rack beneath funnel ... transport to point of sale ...
dump older unsold product on top of new (FIFO) and place full
pan for serving.
Place a sheet pan on top of cart to create portable work surface.
•
Put a cutting board in the pan for prep work ... drippings and
scrap are contained in the pan.
Place additional sheet pans on the lower racks to provide
•
more space for fresh food pans or soiled items.
Swivel locking casters provide easy 4-way maneuverability and
•
can be locked to create a stationary work table.
Durable stainless steel construction; racks & funnel are easily
•
disassembled without tools for clean-up.
• Multi-functional ... saves space in a crowded kitchen.
_
Design Features
Nest full or half pan in
funnel ... dump cooked
product directly to pan for
serving.
Listings
FIFO rotation system ...
place full pan of fresh
product under funnel &
transport to point of sale ...
dump unsold product on
top, then place new pan
serving.
Put an 18x26 sheet
pan on top & use as
a transport cart or
extra counter space;
add a 15x20 cutting
board & use as a
prep table.
Drippings and scrap
are contained in the
pan, making clean-up
quick and easy.
Use lower racks to
transport fresh items
to the point of sale
and to return used
and soiled items back
to the kitchen.
Countertop version of the Xpress-
peditor is available. It utilizes only the
funnel to provide an operator the
functionality of the LT-4 without the cart.
Specify LT-4-C
Giles Foodservice Equipment
ISO 9001 Registered Company • Committed to Quality
P.O. Box 210247 • 2750 Gunter Park Drive West • Montgomery,AL 36121-0247 USA
334.272.1457 • Fax 334.239.4117 • Phone Toll Free:800.554.4537
Web Site: www.gfse.com • Email: [email protected]
Printed in U.S.A. 08/02/2010 Form 65598-A
Page 2
Item No.: ___
Giles Xpress-peditor
Model LT-4 Landing Table System
Quantity: ___________________
Project Name: ___________________
SIS#: ___________________
AIA/CSI#: ___________________
Inches [mm]
Specifications
Giles reserves the right to change specifications and/or product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements,
additions or replacements for previously purchased equipment.
Construction:
Cart: 16-Ga Welded Stainless Steel Tube
Shelf Racks & Funnel: 16-Ga Stainless Steel
Listings: NSF
Product Designation: LT-4, LT-4-C
_
Dimensions:
Width: 22-3/16” [563 mm]
Depth: 28-13/16” [732 mm]
Height: 36-11/16” [932 mm]
Floor Space Consumed: 4.4 sq ft [.41 sq m]
Shipping Specifications:
Crated Weight: 80 lbs [36.3 kg]
Crated Cube Size: 29-1/4” X 21-1/2” X 39” = 14.2 cu ft
[743 mm X 546 mm X 961 mm = .4 cu m]
Accessories Included:
Floor Model: Sheet Pan, Glazing Screen, 4” Full Pan, 2-1/2” Full Pan, Cutting Board, (2) Pan Grates
Counter-Top Model: Sheet Pan, 2-1/2” Full Pan, Cutting Board, (1) Pan Grate
How To Specify
Models:
1.
Specify part number from the following:
Qty Model Part Number
LT-4 (Floor Model)
LT-4-C (Counter-Top Model)
71545
71577
Accessories (additional charge):
2.
Specify part number and quantity of accessory
items needed:
Qty Description
Part
Number
Glazing Screen 77175
Sheet Pan, 18 x 26 78602
Full Pan, 4” Deep 76175
Full Pan, 2-1/2” Deep 76024
Cutting Board, 15 x 20 x 1/2 41131
Grate, Full Pan 76207
Giles Foodservice Equipment
P.O.Box 210247 • 2750 Gunter Park Drive West • Montgomery,AL 36121-0247 USA
334.272.1457 • Fax 334.239.4117 • Phone TollFree: 800.554.4537
Web Site: www.gfse.com • Email: [email protected]
Shipping:
3.
Specify preferred shipping method
Printed in U.S.A. 08/02/2010 Form 65598-A
Loading...