Gigabyte GA-6VXC7-4X-P Manual [zh]

0 (0)
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device ,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection against harmful interference in
residential installations. This equipment
generates, uses, and can radiate radio
frequency energy, and if not installed and used
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Model Number:
Mother Board
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
and (2) this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name: ERIC LU
Signature:
Date: Mar. 7, 2001
Eric Lu
GA-6VXC7-4X-P
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product
( description of the apparatus, system, installation to which it refers)
Mother Board
GA-6VXC7-4X-P
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-2 by household appliances and similar
industrial, scientific and medical (ISM electrical equipment “Harmonics”
high frequency equipment
EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-3 by household appliances and similar
broadcast receivers and associated electrical equipment “Voltage fluctuations”
equipment
EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1:
of radio disturbance characteristics of Residual, commercial and light industry
household electrical appliances,
portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1:
apparatus Residual, commercial and light industry
EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2:
of radio disturbance characteristics of Industrial environment
fluorescent lamps and luminaries
EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2:
broadcast receivers and associated Industrial environment
equipment
EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household
of radio disturbance characteristics of appliances tools and similar apparatus
information technology equipment
DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible
part 10 for receiving and/or distribution from power systems (UPS)
part 12 sound and television signals
CE marking (EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment
electronic and related apparatus for including electrical business equipment
household and similar general use
EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for
electrical appliances uninterruptible power systems (UPS)
Manufacturer/Importer
Signature
:
Rex Lin
(Stamp)
Date : Mar. 7, 2001 Name : Rex Lin
6VXC7-4X-P
Socket 370 處理器主機板
中文安裝手冊
Socket 370 處理器主機板
REV. 5.0 Second Edition
R-50-02-010627C
12MC-6VXC74XP-5002
使用手冊之組織架構
此安裝手冊是依下列章節組織而成:
1) 版本修改摘要 使用手冊版本修改資訊
2) 清點附件 產品盒內附件清單
3) 特色摘要
主機板詳細資訊和規格
4) 硬體設定
主機板安裝指南
5) 效能測試和晶片組功能方塊圖 主機板效能測試結果和晶片組功
能方塊圖
6) BIOS 功能設定 BIOS 功能設定指南
7) 附錄 參考資料
版本修改摘要
P.1
清點附件
P.2
特色彙總
P.3
6VXC7-4X-P主機板的元件配置圖
P.5
CPU 速度設定 / 插座及接腳設定的快速安裝指南目錄
P.6
效能測試
P.25
晶片組功能方塊圖
P.26
記憶體安裝指南
P.27
BIOS 功能設定目錄
P.28
附錄
P.55
6VXC7-4X-P 主機板
1
版本修改摘要
版本 修改摘要 日期
5.0 6VXC7-4X-P 主機板中文安裝手冊首版發行。 Mar .2001
5.0 6VXC7-4X-P 主機板中文安裝手冊第二版發行。 Jun. 2001
本手冊所有提及之商標與名稱皆屬該公司所有。
本手冊若有任何內容修改,恕不另行通知。
2001 6 27 台北,台灣
清點附件
2
清點附件
þ 6VXC7-4X-P 主機板一片
þ 軟、硬碟插座排線各一條
þ 主機板驅動程式光碟片(TUCD)
þ 6VXC7-4X-P 中文使用手冊
6VXC7-4X-P 主機板
3
特色彙總
規格
Ÿ 主機板採四層設計 ATX 規格 30.5 公分 x 18 公分
CPU Ÿ Socket 370 處理器
Intel Pentium
!!!100/133MHz FSB, FC-PGA
Intel Celeron
TM
66MHz FSB, PPGA/FC-PGA
VIA Cyrix
III 100/133MHz FSB, PPGA
Ÿ 2nd
快取記憶體取決於 CPU
晶片組
Ÿ VT82C694X (VIA Apollo Pro 133A)
Ÿ VT82C686B
時脈產生器
Ÿ ICS 9248DF-39
Ÿ 支援 66/100/133 MHz system bus speeds (PCI 33MHz)
Ÿ 75/83/112/124/140/150 MHz system bus speeds
(PCI 44MHz) (保留)
記憶體
Ÿ 3 168-pin DIMM 插槽
Ÿ 支援 PC-100 / PC-133 SDRAM VCM SDRAM
Ÿ 最高可支援到 1.5 GB
Ÿ 僅支援 3.3V SDRAM DIMM
Ÿ 支援 72 位元 ECC 類型 DIMM 模組
I/O 控制器
Ÿ VT82C686B
擴充槽 Ÿ 1 AGP 擴充槽,支援 2X/4X mode 及迎合 AGP 2.0
Ÿ 5 32-bit PCI 2.2 Bus 擴充槽
Ÿ 1 AMR (Audio Modem Riser) 擴充槽
Ÿ 1 ISA 擴充槽
內建 IDE Ÿ IDE 控制器內建在 VIA
VT82C686B PCI 晶片內,提供
PIO, Bus Master (Ultra DMA/33 ATA 66/ATA100) 操作模
式的 IDE HDD/CD-ROM
Ÿ 可連接四個 IDE 裝置
內建周邊設備 Ÿ 1 個軟碟插座支援兩台磁碟機
(360K ,720K ,1.2M ,1.44M 2.88M bytes)
Ÿ 1 個並列插座可支援 SPP/EPP/ECP 模式
Ÿ 2 個串列插座 (COM A COM B)
Ÿ 2 USB 插座
Ÿ 1 個遠紅外線傳輸
續下頁
特色彙總
4
硬體監控 Ÿ CPU/系統風扇轉速偵測
Ÿ CPU/系統溫度偵測
Ÿ 系統電壓自動偵測(Vcore, Vcc3, Vcc, +12V)
Ÿ 偵測 CPU 過溫自動關閉
Ÿ ACPI 電源管理模式偵測 CPU 過溫自動關機
PS/2 插座
Ÿ PS/2
鍵盤連接埠及 PS/2
滑鼠連接埠
BIOS Ÿ 使用經授權 AMI BIOS, 2M bit 快閃記憶體
附加特色 Ÿ 包含 3 個散熱風扇電源接腳
Ÿ 鍵盤過電流保護
Ÿ 支援網路喚醒功能(WOL)
Ÿ 支援內建/外建數據機喚醒功能
6VXC7-4X-P 主機板
5
6VXC7-4X-P
機板的元件配置圖
6VXC7-4X-P
PCI1
PCI2
PGA 370 CPU
VT82C686B
VT82C694X
COMB
COMA
LPT
PS/2
BIOS
ATX POWER
JP16
BAT1
JP2
FLOPPY
IDE2
IDE1
AGP 1
JP15
SW2
JP1
J2
JP19
SW1
J3
J1
JP23
JP7
JP8
USB
AMR
PCI3
PCI4
PCI5
ISA 1
DIMM1
DIMM2
DIMM3
JP18
J4
JP30
6VXC7-4X-P 主機板的元件配置圖
6
$ CPU速度設定 / 插座及接腳設定的快速安裝指南目錄 Page
CPU速度設定
P.7
插座
P.15
COM A 串列插座/ COM B 串列插座/ LPT 並列插座
P.15
USB 規格插座
P.15
PS/2 鍵盤及PS/2 滑鼠插座
P.16
JP16 (CPU散熱風扇電源接腳)
P.16
JP15 (電源散熱風扇電源接腳)
P.17
JP2 (系統散熱風扇電源接腳)
P.17
ATX 電源插座
P.18
Floppy (軟碟插座)
P.18
第一組IDE 1插座 / 第二組IDE 2插座
P.19
J3 (內接數據機音源接腳)
P.19
J1 (網路遠端開機)
P.20
J4(紅外線接腳)
P.20
接腳定義說明
P.21
J2 (2x11 Pins 接腳)說明
P.21
JP1 (清除CMOS功能接腳)
P.22
JP23 (主機板外殼開起顯示接腳)
P.22
JP19 (Cyrix CPU功能接腳) [選購]
P.23
JP7/JP8/JP18(Onboard AC97&AMR選擇)[選購]
P.23
JP30(Over Voltage CPU Speed Up)[選購]
P.24
6VXC7-4X-P Motherboard
7
CPU 速度設定
系統速度可以選擇設定為 66, 100, 133MHzAuto。您可以選擇系統速度(SW1)並使
DIP SWITCH (SW2) 來設定CPU速度。所支援CPU的頻率從 500 1G Hz.
Set System Bus Speed
SW1: O : ON, X : OFF
CPU (MHz) 1 2 3 4 5 6 PCI(MHz)
Auto X X X X O O 33.3
66 O O X X X X 33.3
75 O O O X X X 37.5
83 O O X O X X 41.6
100 O X X X X X 33.3
112 O X O X X X 37.3
124 X X X O X X 31
133 X X X X X X 33.3
140 X X O O X X 35
150 X X O X X X 37.5
M
請注意主機板上DIP SWITCH (SW2)設定的倍頻及外頻,需要和CPU的倍頻及外頻
相符合,否則易造成系統當機。
SW2:
DIP SWITCH FREQ. RATIO
1 2 3 4
X3 O X O O
X3.5 X X O O
X4 O O X O
X4.5 X O X O
X5 O X X O
X5.5 X X X O
X6 O O O X
X6.5 X O O X
X7 O X O X
X7.5 X X O X
X8 O O X X
X8.5 O X O O
X9 X X O O
X9.5 X O O O
X10 X O X X
X10.5 O O X O
X11 O X X X
X11.5 X O X O
X12 O X X O
CPU Speed Setup
8
X13 X X X O
X14 O O O X
X15 X O O X
X16 O X O X
F 外頻為Auto的接腳設定:
SW1
ON
1 2 3 4 5 6
«注意:
1. 如果您使用外頻為 66, 100, 133MHz CPU, 我們建議您將系統速度設定為”Auto”
2. 我們不建議您設定 112 / 124 / 142 / 150MHz, 因為那不屬於硬體標準規格範圍.
如果您要將系統速度設定為 112 / 124 / 142 / 150MHz , 請依據您的硬體規格設定,
例如;CPU,顯示卡, 記憶體,硬碟來設定。
1. Celeron
TM
533/ 66 MHz FSB
SW1
ON
1 2 3 4 5 6
SW2
ON
SW2
1 2 3 4
6VXC7-4X-P Motherboard
9
2. Celeron
TM
566/ 66 MHz FSB
SW1
ON
1 2 3 4 5 6
SW2
ON
1 2 3 4
3. Celeron
TM
600/ 66 MHz FSB
SW1
ON
1 2 3 4 5 6
SW2
ON
1 2 3 4
4. Celeron
TM
633/ 66 MHz FSB
SW1
ON
1 2 3 4 5 6
SW2
ON
1 2 3 4
5. Celeron
TM
667/ 66 MHz FSB
SW1
ON
1 2 3 4 5 6
SW2
ON
1 2 3 4
CPU Speed Setup
10
6. Celeron
TM
700/ 66 MHz FSB
SW1
ON
1 2 3 4 5 6
SW2
ON
1 2 3 4
7. Cyrix
III 550/ 100MHz FSB (Optional)
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4 5 6
8. Cyrix
III 533 / 133 MHz FSB (Optional)
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4 5 6
9. Cyrix
III 600/ 133 MHz FSB (Optional)
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4 5 6
6VXC7-4X-P Motherboard
11
10. Pentium
®
!!! 500/100MHz FSB
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4 5 6
11. Pentium
®
!!! 550/100MHz FSB
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4 5 6
12. Pentium
®
!!! 600/100MHz FSB
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4 5 6
13. Pentium
®
!!! 650/100MHz FSB
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4 5 6
CPU Speed Setup
12
14. Pentium
®
!!! 700/100MHz FSB
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4 5 6
15. Pentium
®
!!! 750/100MHz FSB
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4 5 6
16. Pentium
®
!!! 800/100MHz FSB
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4 5 6
17. Pentium
®
!!! 850/100MHz FSB
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4 5 6
6VXC7-4X-P Motherboard
13
18. Pentium
®
!!! 533/133MHz FSB
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4 5 6
19. Pentium
®
!!! 600/133 MHz FSB
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4 5 6
20. Pentium
®
!!! 667/133MHz FSB
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4 5 6
21. Pentium
®
!!! 733/133MHz FSB
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4 5 6
Loading...
+ 44 hidden pages