GV-B600LZ Brackets
The GV-B600LZ Brackets are required for installing the GV-ML600 electromagnetic lock on
in-swing doors. The L bracket is used to mount the magnetic GV-ML600 lock body on the
door frame above the door and the Z brackets attach the magnet faceplate to the door.
Packing List
1. L-Z Brackets for magnetic lock x 3
L Bracket x 1
Z Bracket x 2
2. M8 (35 mm) screw + black rubber spacer x 1
4. M5 (13 mm) screw x 5
Note: To install the GV-B600LZ brackets, you will need to use the lock body, magnet
faceplate, inner hexagon wrench and galvanized steel rivets, which are parts supplied with
the GV-ML600 electromagnetic lock.
3. M5 (5 mm) screw x 6
5. M5 (9 mm) screw x 5
October 2, 2013
1
Dimensions
z L Bracket
z Z Bracket (A)
z Z Bracket (B)
(Unit: mm)
(Unit: mm)
2
October 2, 2013
Installation
1. Attach the L bracket on the door frame above the door using the supplied M5 (13 mm)
screws.
2. Take the lock body from GV-ML600 electromagnetic lock, remove the two aluminum
plugs on the side, and unscrew the screws inside.
3. Remove the mounting plate from the lock body.
4. Attach the lock body to the L bracket and secure the mounting screws from step 2 using
the inner hexagon wrench that comes with the GV-ML600.
October 2, 2013
3
5. Place the two aluminum plugs back into the mounting screw holes.
6. Mount Z bracket (B) onto the door by tightening the supplied M4 (9 mm) screws.
7. Place the magnet faceplate from the GV-ML600 on the Z bracket (A) and insert the
supplied M8 (35 mm) screw and black rubber spacer to the hole in the center. Insert the 2
galvanized steel rivets that come with the GV-ML600 toward the edges of the magnet
faceplate.
Z Bracket (A)
Magnet
Faceplate
Z Bracket (B)
4
October 2, 2013
8. Place Z bracket (A) with the magnet faceplate on Z bracket (B) and insert the supplied
M5 (5 mm) screws. Before tightening the screws, adjust the position of the Z brackets so
that the magnet faceplate contacts the lock body.
The L-Z brackets should look like the illustration below after installation is completed.
Specifications
Holding Force
Dimensions
(L x W x H)
Weight (3 brackets)
Material
All specifications are subject to change without notice.
October 2, 2013
L bracket
Z bracket (x 2)
272.15 kg (600 lb)
250 x 48 x 30 mm (9.8” x 1.9” x 1.2”)
185 x 50 x 50 mm (7.3” x 2.0” x 2.0”)
750 g (1.65 lb)
aluminum
5
Loading...