GE OBC Data Sheet

OBC OMNIBEAMTM
COMPACT FLUORESCENT LUMINAIRE
High Bay Prismatic Acrylic Open /Enclosed —
Surface Mount Optical Series
APPLICATIONS
Commercial / Retail applications where color rendering and instant-on characteristics are desired. For use in multipurpose, gymnasium, auditorium environments where multiple light levels and high quality of lighting are critical. For light industrial, assembly and general purpose applications where lighting control and consistent light output is required.
SPECIFICATION FEATURES
With
EZ Connect
• 1598 Listed
Suitable For Damp Locations
TM
• Listed to Canadian standards and codes
26” Open/ventilated or enclosed
opticals with clear acrylic lens
40 deg, C. ambient rating standard
• UV stabilized injection molded prismatic acrylic reector
ORDERING NUMBER LOGIC
OBC
PRODUCT IDENT
XXX
OBC = Omnibeam Compact Fluo­rescent Luminaire
W
COLOR
X
W=
White
FLUORESCENT WATTAGE ORDER INFORMATION
Omnibeam Open
V6 Optical - Open and Ventilated 26 Inch Reector
Wattage Number Photo *Lumen Order code Wattage of Lamps SC Curve Multiplier
36 32 6 2.7 452884 .52 38 32 8 2.7 452884 .69 43 42 3 2.7 452884 .38 44 42 4 2.7 452884 .50 48 42 8 2.7 452884 1.00 73 70 3 2.9 452885 .61 74 70 4 2.9 452885 .81 76 70 6 2.9 452885 1.22
Polyester
Powder
48
WATTAGE
XX
See Table
Below
F
LIGHT SOURCE
X
F = Fluorescent 4100K Color Temp 4-Pin Biax Lamps Included
0
VOLTAGE
X
60Hz 0 = 120/208/ 240/277 Mulitvolt 1 = 120 2 = 208 3 = 240 4 = 277
*Single voltage
selection for 120, 208, 240, 277 available
only when
ordering installed cord sets, (31, 33 and Modular
Prewire),
or Fusing. Otherwise order “0” for Multivolt 120/208/240/ 277
50Hz 6 = 220 R = 230 Y = 240
F
BALLAST TYPE
X
F = Standard Electronic
Omnibeam Enclosed
E6 Optical - Enclosed 26 Inch Reector with Flat Acrylic Lens
Wattage Number Photo *Lumen Order Code Wattage of Lamps SC Curve Multiplier
36 32 6 2.6 452886 .52 38 32 8 2.6 452886 .69 43 42 3 2.6 452886 .38 44 42 4 2.6 452886 .50 48 42 8 2.6 452886 1.00 73 70 3 2.7 452887 .61 74 70 4 2.7 452887 .81 76 70 6 2.7 452887 1.22
* Multiply rated lumens from curve listed by “Lumen Multiplier” to provide accurate lumen value for corresponding lamp combination
• In-line EZ ConnectTM plug-in
adapter port allows for:
• Quick, easy xture installation and removal
• Hook, Loop, cord & plug options
• Plug-in modular wiring systems
• Plug-in fuse kits
• Symmetrical, hexagonal
heavy duty die-cast aluminum ballast housing
V6
OPTICAL
XX
V6 = Open
and Ventilated
26 in.
Reector
E6 = Enclosed
26 in with clear at acrylic
lens Note: see Selection
Table Below
Note: Contact
Factory for
®
LEXAN
polycarbonate
VA
PHOTOMETRY
XX
VA = Fixed
with white polyester paint standard
• Standard threaded slide-in mounting adapter for easy installation
• Supplied with lamps (not installed)
• Shipped as components: Ballast, Optical and CFL
Socket adapter reector pan
11
MOUNTING STYLE
XX
11 = Pendant Mounting / EZ Connect
13 = Provision for Slide-on Primary Electrical
Disconnect. Order TWOBP Box (Thru Feed
Capability)
14 = Provision for Slide-on Primary Electrical
Disconnect. (Pendant and Thru Feed
Capability) Order PED Box separately
15 = Prewire with EZ Loop, Cord and Plug Part or
“Power Hook” (Order Receptacle/Hook Box Separately) (Not CSA/CUL)
31 = Prewire with EZ-Hook, 3-ft (0.9 Meters)
#16/3 Cord, and Nema Plug
33 = Prewire with EZ-Loop, 3-ft (0.9 Meters)
#16/3 Cord, and Nema Plug (Order locking receptacle hook box separately.)
92 =
Individual ballast leads provided for switched
light levels / individual ballast circuiting
MODULAR PREWIRE
41 = ACS with 3-ft (0.9 meter) cord & EZ-Hook 69 = ACS with 6-ft (1.8 meter) cord & EZ-Hook 43 = ACS with 3-ft (0.9 meter) cord & EZ-Loop 70 = ACS with 6-ft (1.8 meter) cord & EZ-Loop
PLUG-N-GO
51 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Hook 71 = Plug-N-Go with 6 ft. (1.8meter) Cord & Hook 53 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Loop 72 = Plug-N-Go with 6 ft. (1.8 meter) Cord & Loop
Note: ACS = Flex 3+ Plug-N-Go = FSC Series
OPTIONS
XXX
F = Fusing (Fuse Option not
available with Multivolt) (Dual
Fusing, 208 - 240 volt, not available
with CUL listing)
G = Secondary
Wiring Access
7/8 in. dia
knockout
R = “Pre-wired
for emergency battery back-up (sup­plied by others) with
7/8” OD cus­tomer access (120 or 277volt
only)
I-136/2008
GE Lighting Solutions 1-888-MY-GE-LED www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
Most commonly ordered
OBC OMNIBEAM ™ COMPACT FLUORESCENT LUMINAIRE
HighBayPrismaticAcrylic-Open/Enclosed—SurfaceMountOpticalSeries
FIXTURE DIMENSIONS
3/4 in. NPSC Thread
Installed Height
V6 26.96 in.
(685mm)
E6 27.26 in.
(692mm)
V6 25.56 in. DIA (649mm) E6 25.88 in. DIA (657mm)
Fixture Height
V6 27.66 in.
(703mm)
E6 27.96 in.
(710mm)
DATA
Approximate Net Weight lbs kgs
Total Fixture 35 - 40 16 - 18
BALLAST SELECTION TABLE
Single Lamp Light Wattage Source Multi 120 208 240 277 220 230 240 32 CFL Yes Yes Yes Yes Yes Yes Yes Yes 42 CFL Yes Yes Yes Yes Yes Yes Yes Yes 70 CFL Yes Yes Yes Yes Yes Yes Yes Yes
CFL = Compact Fluorescent
Compact Fluorescent provided with electronic ballast. 4-pin biax lamp included.
Ballast Type and Voltage
60 hz 50 hz
COMPACT FLUORESCENT BENEFITS:
Instant on - Compact uorescent lamps produce light instantly. This allows for the system to be turned o and on as required for optimized energy savings
Instant restrike - Compact uorescent lamps come on as soon as they are energized with no delayed restrike time. The need for emergency switched quartz restrike feature is eliminated.
Color Rendering - White light with a color rendering index (CRI) of 82 provides for constant, uniform color over the life of the lamp. High CRI allows for brighter, clearer, more vibrant color recognition
Elimination of UV - Compact uorescent lamps eliminate the concerns of ultraviolet radiation.
Improved lumen maintenance - Compact uorescent lamps have less lumen depreciation at mean
life than typical metal halide lamp types. This results in more consistent light output over the life of the lamp.
Low noise - Compact uorescent electronic ballasts used do not produce perceptible noise
Switchable Light Levels - Multiple ballasts provide the opportunity to independently switch lamp
pairs for multiple, stepped light levels. Optional wiring for circuited versions is available.
Emergency battery back-up - Battery back-up allows for emergency lighting without the need for an auxiliary power back-up system
Multiple lamp back-up - The use of multiple lamps insures that with the independent failure of a single lamp, the xture continues to provide light until relamping occurs.
Safe Operation - Compact uorescent light sources do not require specic operation guidelines for
safe operation.
GE Lighting Solutions 1-888-MY-GE-LED www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
2008/I-137
Loading...