GE
Lighting Solutions
Industrial Lighting
Omnibeam™ 400 (OB5)
imagination at work
Product Features
GE Indoor Lighting luminaires are designed to produce optimum illumination from the lamp, optical system and ballast,
while providing specific light patterns for specific applications. These reliable systems help to improve safety and
energy savings, while enhancing productivity and efficiency, to put your industrial workplace in the best possible light.
Applications
• For over 20-foot (6 meter) applications, assembly lines,
inspection areas, production bays, storage areas,
warehouses, commercial and retail areas
Housing
• Symmetrical heavy-duty die-cast aluminum ballast
housing
Finish
• Polyester powder gray or white paint finish
Ratings
• 1598 Listed Suitable for Damp Locations
• Listed to Canadian standards and codes
Mounting
• Threaded slide-in mounting adapter for easy mounting
• Single casting integral hook/loop and mounting plate is
available
Unique Features
• Open/ventilated or enclosed opticals with choice of
clear or prismatic lens
• Enclosed 26 inch available for wet location
• In-line EZ Connect™ plug-in adapter port allows for:
— hook/loop, cord & NEMA plug
— plug-in modular wiring systems
— plug-in fuse kits
• 55° C ambient standard, except as noted in
Photometric Table
• Adjustable mogul base socket - E39 standard
• Safety chain provisions
• Shipped as components: Ballast, Optical
• Magnapack available for ballast
• Pulse start system for metal halide available
Reflectors
• Acrylic reflector
Ordering Number Logic
Omnibeam™ 400 (OB5)
OB5 W
_ _ _ - _ - _ _ - _ - _ - _ - _ _ - _ _ - _ _ - _
PROD. ID
OB5 =
Omnibeam
400
Luminaire
COLOR
W = White
Polyester
Powder
WATTAGE
17 = 175
25 = 250
32 = 320
35 = 350
40 = 400
LIGHT
SOURCE
E = Energy
Act Compliant Pulse
MH (EPMH)
S = HPS
For
International
Markets
only
M = MH
P = Pulse
Start
MH
Note: Lamp is
vertical base
up. Lamp not
included.
VOLTAGE
60Hz
0 = 120/208/
240/277
MULTIVOLT
1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
D = 347
F =
120X347
T = 220
50Hz
6 = 220
R = 230
Y = 240
G = 380
BALLAST
TYPE
See Ballast
Selection Table
A = Autoreg
D = System 3
Bilevel
Autoreg
G = CANADIAN
Mag-Reg
(Grounded
Socket Shell)
H = HPF Reactor
or Lag
M = Mag- Reg
OPTICAL
E2 = Enclosed
22 in. with
clear flat
acrylic lens
E6 = Enclosed
26 in. with
clear flat
acrylic lens
P2 = Enclosed
with prismatic
conical lens
22 in. Optical
V6 = Open
and ventilated
26 in. acrylic
V2 = open
22 in. acrylic
PHOTOMETRY
XX = Select
Code from
Photometric
Selection
Table
See
Photometeric
table on next
page.
Ballast Selection Table
Light 240, 277 x
Wattage Source Multivolt 480 347 347 220 220 230 240 380
250 HPS A,M A,D,G,M A,D,G A A,H A,H,M A,H A ,H M
400 HPS A,M A,D,G,M A,D,G A A,H A,H,M A,H,M A,H,M M
175 MH A A A A N/A N/A N/A N/A N/A
250 MH A A,D A,D A A A A A N/A
400 MH A A,D A,D A A A A A N/A
PULSE START METAL HALIDE LIGHT SOURCE
BALLAST SELECTION TABLE
175 EPMH A A A N/A N/A N/A N/A N/A N/A
250 EPMH A A A N/A N/A N/A N/A N/A N/A
320 EPMH A A A N/A N/A N/A N/A N/A N/A
350 EPMH A A A N/A N/A N/A N/A N/A N/A
400 EPMH A A A N/A N/A N/A N/A N/A N/A
NOTE: N/A = Not Available
* H is HPF-Linear Reactor available as 277 volt only.
Cannot be used with Automatic Switch Quartz Option.
CANADIAN NOTES:
1. “A”, Autoreg, and “D”, Bilevel Autoreg available 120, 277 or 347 volts only
2. 1000 Watt Metal Halide and HPS available 120, 277 or 347 volt Autoreg only.
3. 208, 240, and 480 volts require CWI ballast. Use “G” when available.
Contact factory for all others.
4. Multivolt not available.
Ballast Type / Voltage
60HZ 50HZ
120, 208 120
CODE
XX = Select Code Below
11 = Pendant mounting
13 = Provision for Slide-on Primary Electrical Disconnect.
Order TWOBP Box (Thru Feed Capability Only)
Separately.
14 = Provision for Slide-on Primary Electrical Disconnect.
(Pendant and Thru Feed Capability) Order PED Box
Separately
15 = Prewire with EZ-Loop, Cord and Plug Part of “Power
Hook”. Order Receptacle/Hook Box Separately.
(Not CSA/CUL)
31 = Prewire with EZ-Hook, 3-ft (0.9 Meters) #16/3 Cord,
and Nema Plug
33 = Prewire with EZ-Loop, 3-ft (0.9 Meters) #16/3 Cord,
and Nema Plug (Order locking receptacle hook
box separately.)
MODULAR PREWIRE
41 = ACS with 3-ft (0.9 meter) cord & EZ-Hook
69 = ACS with 6-ft (1.8 meter) cord & EZ-Hook
43 = ACS with 3-ft (0.9 meter) cord & EZ-Loop
70 = ACS with 6-ft (1.8 meter) cord & EZ-Loop
PLUG-N-GO
51 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Hook
71 = Plug-N-Go with 6 ft. (1.8meter) Cord & Hook
53 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Loop
72 = Plug-N-Go with 6 ft. (1.8 meter) Cord & Loop
Note: ACS = Flex 3+
Plug-N-Go = FSC Series
MOUNTING
CODE
OPTIONS
B = Time Delay
Automatically
Switched Quartz
F = Fusing (Not
available with
multivolt)
G = Secondary
Wiring Access.
7/8 in. dia.
knockout
Q = Non-Time Delay
Automatically
Switched Quartz
R = Non Switch Quartz.
S = Exclusionary mogul
base socket for MH
open fixtures
T = E40 / European
Socket
Exclusionary base socket is available for use with Metal
Halide lamps in open fixtures to comply with NEC 2005
regulations (GELS “S” Option). Customer should consult
or review local electrical codes for compliance.
Product Dimensions Photometric Selection Table
Light Max Spacing Socket Photometric Optical
Wattage Source Temp Criteria Position Curve Code Code
E2 OPTICAL - Enclosed 22in. with flat clear Acrylic lens
175
175
175
175
250
250
250
250
320*
320*
320*
350, 400
350, 400
250-400 HPS 40** 1.5 A 452448 E2 AA
E6 OPTICAL - Enclosed 26in. with flat clear Acrylic lens
350,400
350,400
350,400
350,400
250-400 HPS 55 1.3 E 179861 E6 AE
250-400 HPS 55 1.4 E 179862 E6 AE
250-400 HPS 55 1.5 G 179863 E6 AG
V2 OPTICAL - Open 22in. Reflector, MH, requires “S” Option EX39 base socket
175,250
EPMH 55 1.3 A 452450 V2 AA
175,250
EPMH 55 1.5 G 452451 V2 AG
175,250
EPMH(Coated) 55 1.3 A 452456 V2 AA
175,250
EPMH(Coated) 55 1.5 F 452455 V2 AF
350, 400 EPMH 55 1.6 A 452460 V2 AA
350, 400 EPMH(Coated) 55 1.6 A 452463 V2 AA
250, 400 HPS 55 1.5 A 452447 V2 AA
V6 OPTICAL - Open and Ventilated 26in. Reflector
MH,PMH or EPMH may require “S” Option EX39 base socket -
(consult/review local codes)
350, 400 EPMH 55 1.6 B 178906 V6 AB
350, 400 EPMH(Coated) 55 1.7 C 178976 V6 AC
350, 400 EPMH(Coated) 55 1.6 B 178975 V6 AB
250-400 HPS 55 1.3 E 178905 V6 AE
250-400 HPS 55 1.7 G 178969 V6 AG
P2 OPTICAL - Enclosed 22in. with Acrylic prismatic conical lens
175 EPMH 55 1.1 A 452434 P2 AA
175 EPMH 55 1.6 G 452433 P2 AG
175 EPMH(Coated) 55 1.2 A 452437 P2 AA
175 EPMH(Coated) 55 1.5 F 452438 P2 AF
250 EPMH 40** 1.1 A 452441 P2 AA
250 EPMH 40** 1.5 H 452442 P2 AH
250 EPMH(Coated) 40** 1.1 A 452446 P2 AA
250 EPMH(Coated) 40** 1.5 G 452445 P2 AG
320* EPMH 40** 1.6 A 452454 P2 AA
320* EPMH(Coated) 40** 1.5 A 452459 P2 AA
350, 400 EPMH(Coated) 40** 1.8 A 452464 P2 AA
250-400 HPS 55 1.7 A 452449 P2 AA
*320 watt is ED28 Pulse Start MH
**Contact Factory for 55C availability
55 1.0 D 452431 E2 AD
EPMH
55 1.5 H 452432 E2 AH
EPMH
(Coated)
EPMH
EPMH
EPMH
EPMH
EPMH
EPMH
EPMH
EPMH
EPMH
EPMH
EPMH
EPMH
EPMH
EPMH
EPMH
55 1.0 C 452435 E2 AC
(Coated)
55 1.4 H 452436 E2 AH
40** 1.0 E 452439 E2 AE
40** 1.4 H 452440 E2 AH
(Coated)
40** 1.0 D 452443 E2 AD
(Coated)
40** 1.4 H 452444 E2 AH
40** 1.3 A 452452 E2 AA
40** 1.5 G 452453 E2 AG
(Coated)
40** 1.3 H 452466 E2 AH
40** 1.9 A 452462 E2 AA
(Coated)
40** 1.6 A 452465 E2 AA
55 1.6 B 179849 E6 AB
55 1.8 D 179851 E6 AD
(Coated)
55 1.6 D 179852 E6 AD
(Coated)
55 1.9 H 179853 E6 AH
Photometry
• Approximate Net Weight Ballast and Optical: 37 lbs (17 kgs)
DATA
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
OLP-2993 (Rev.05/24/12)
Loading...