GE NETWORX NX-108E, NETWORX NX-116E, NETWORX NX-124E, NX-6, NX-8 User Manual

NETWORX

TM

NX-4

User manual

NX-4 SYSTEM

KEYPAD

Includes models

NX-108E, NX-116E, NX-

124E

POWER Light is “on” when AC

power is present; flashes to

indicate a low battery condition.

READY Light is “on” when the

system is ready to arm; flashes

if ready to “force arm”.

SERVICE

Light is “on” to indicate a

trouble condition with your system.

ARMED Light is “on” when

armed; “off” when disarmed;

flashes to indicate a previous

alarm.

INSTANT Light is “on” when

there is no entry/exit delay.

FIRE Light is “on” to indicate fire

alarm; flashes to indicate a

trouble condition with your fire

system.

ZONE LIGHTS

are “on” steady to

indicate bypass; slow flash for

zone fault; rapid flash for service

condition.

PULL OUT ZONE ID TAB

NOTE: Some of the features described above may or may not be available for your system.

Check with your installation company to find out how your system is programmed.

5 FUNCTION KEYS perform

various functions.

EMERGENCY ACTIVIATION KEYS

NUMERIC CODE

ENTRY KEYS

1

SECURITY SYSTEM NOTES

Installing/Service Company _________________________________
For Service Call __________________________________________
Central Station ___________________________________________

Duress Code ____________________

FUNCTION CODES

Function Code Controls Function

EMERGENCY ACTIVATION KEYS (check if enabled)

 Fire  Auxiliary Emergency  Police

PROGRAMMED FUNCTIONS

 Abort Delay (s)  Cancel Alarm  Group Bypass (s)
 Auto Bypass (s)  Chime  Quick Arm (s)
 Auto Instant  Communicator Test  Re Exit
 Battery Test  Forced Arming (s)  Siren Test

(s) These features should not be enabled on UL listed systems.

ENTRY / EXIT DELAY TIMES

Exit Delay Time __________ Secondary Exit Delay Time ________
Entry Delay Time _________ Secondary Entry Delay Time _______

ZONE DESCRIPTIONS

01 _______________________ 05 ________________________
02 _______________________ 06 ________________________
03 _______________________ 07 ________________________
04 ________________________ 08 ________________________

Installer: Mark wireless zones with an “u” as required by UL.

2

THIS MANUAL IS FURNISHED TO HELP YOU UNDERSTAND YOUR SECURITY
SYSTEM AND BECOME PROFICIENT IN ITS OPERATION. ALL USERS OF
YOUR SECURITY SYSTEM SHOULD READ AND FOLLOW THE INSTRUCTIONS
AND PRECAUTIONS IN THIS BOOKLET. FAILURE TO DO SO COULD RESULT
IN THE SECURITY SYSTEM NOT WORKING PROPERLY. THIS BOOKLET
SHOULD BE KEPT IN AN ACCESSIBLE LOCATION FOR THE LIFE OF THE
SECURITY SYSTEM. IF YOU DO NOT UNDERSTAND ANY PART OF THIS
MANUAL YOU SHOULD NOTIFY YOUR INSTALLING COMPANY.

The SECURITY CONTROL can be turned on (ARMED) and off (DISARMED) by
entering a 4 or 6 digit code into the Keypad Control, which is similar to a telephone
keypad. If your Security Control has been so programmed, you may be able to turn on
(ARM) your System by simply pressing the [STAY] or [EXIT] key. The system must
always be disarmed using a 4 or 6 digit code. The LED keypad includes up to 35 lights
and a built-in electronic sounder. These provide specific information relating to the
status of the security system which is described in the booklet. Understanding what
the lights and sounds mean will help you to easily operate your system.

READ THE ENTIRE MANUAL AND, IF POSSIBLE, PRACTICE ON THE KEYPAD
CONTROL WHILE YOUR PROFESSIONAL INSTALLER IS ON SITE.

KEEP IN MIND, THE LEVEL OF SECURITY YOU WILL OBTAIN WITH THIS
SYSTEM RELATES SPECIFICALLY WITH TWO MAJOR FACTORS:

1. The quantity, quality, and placement of security devices attached to this
system.

2. The knowledge you have of the security system and how that knowledge is
utilized in a weekly test of the complete system.

YOU SHOULD BE AWARE OF THE FOLLOWING FACTS WHEN PREPARING A
SAFETY/SECURITY PLAN FOR YOUR HOME/BUSINESS.

 Your security system is an electronic device and is subject to failure or

malfunction. Do not rely on it as your single source of security.

 Your system should be tested weekly.
 Your system will not work without power.
 Warning devices will need to be loud enough, wired correctly, and properly

placed to provide notification of an alarm event.

 Smoke and heat detectors may not detect heat and smoke in all situations.
 Use qualified security professionals to install and maintain your security system.
 It may be possible to arm the security system without the backup battery

connected. Your periodic test should be done with A.C. Power removed to verify
the battery is connected and adequately charged.

 Care should be taken to plug in and restrain the A.C. Transformer after testing.

PLEASE READ THE FOLLOWING INFORMATION AND INSTRUCTIONS
CAREFULLY BEFORE OPERATING YOUR SECURITY CONTROL SYSTEM. IF
YOU DO NOT UNDERSTAND ANY PORTION OF THIS MANUAL, OR IF YOU
HAVE ANY QUESTIONS ABOUT YOUR SYSTEM, CONTACT THE INSTALLING
COMPANY LISTED ON PAGE 1 OF THIS BOOKLET.

3

TABLE OF CONTENTS

GLOSSARY OF TERMS....................................................................4

UNDERSTANDING THE LIGHTS.....................................................5

Armed Light......................................................................................5

Bypass Light.....................................................................................5

Cancel Light .....................................................................................5

Chime Light......................................................................................5

Exit Light...........................................................................................5

Fire Light ..........................................................................................5

Instant Light......................................................................................5

Power Light ......................................................................................5

Ready Light......................................................................................5

Stay Light .........................................................................................6

Zone Light ........................................................................................6

EMERGENCY ACTIVATION KEYS.................................................6

KEYPAD FUNCTIONS.......................................................................7

Arming Your System In The “Away” Mode.......................................7

Arming Your System In The “Stay” Mode.........................................7

Using The Quick Arm ......................................................................8

Disarming Your System....................................................................8

Cancel / Abort Feature ....................................................................9

Bypassing Zones..............................................................................9

Group Bypass...................................................................................9

Unbypassing.....................................................................................9

Turning The Door Chime On And Off...............................................9

CHANGING USER CODES.............................................................10

ASSIGNING USER CODE AUTHORITY LEVELS ......................10

OTHER KEYPAD FUNCTIONS......................................................11

Setting The Keypad Tone...............................................................11

View Alarm Memory.......................................................................11

Test Function .................................................................................12

Walk Test .......................................................................................12

Reset Function...............................................................................12

Setting The System Date ...............................................................12

Setting The System Clock..............................................................13

KEYPAD CONTROL TONES (BEEPS).........................................14

SERVICE MENU................................................................................15

EMERGENCY EVACUATION PLANS...........................................16

4

GLOSSARY OF TERMS

Abort Delay: An option that allows a delay in reporting to the central station.

There is a communicator delay of 30 seconds. It can be removed, or increased
up to 45 seconds at the option of the end user by consulting with the installer.

Authority Level: The level of access an individual has when using an alarm
panel.

Central Station: Location where alarm data is sent during an alarm report.
Chime Feature: An option that allows the keypad to sound a ding-dong

whenever an entry/exit door is opened.
Codes: Can be either User Codes (relating to a person) or Function Codes (a

toggle switch to turn specific functions on/off). NOTE: A system may have either
8 four (4) digit codes or 8 six (6) digit codes, but not a mixture of the two.

Duress Code: An option that allows a special code to be sent to the central
station that indicates the alarm system is being operated under duress. Any
arming or disarming operation performed using the Duress PIN (in lieu of the
User PIN) will operate normally, without additional audible or visual indicators.

Forced Arming: An option that allows the system to be turned on (ARMED) with
one or more zones open. A system that is ready to be “force armed” will flash the
ready light. (Note: Those zones that are not ready will not create an alarm.)

Function Code: A Function Code is either a four (4) or six (6) digit code that has
been programmed by the installer to operate a device.

Group Bypass: An option that allows the user to bypass multiple zones with a
single operation.

Instant/Delay: An option that allows an instant alarm condition for Entry/Exit
doors, or grants a delay to allow someone to enter/exit the building without an
alarm, or before entering a user code to disarm.

Master Code: A master arm/disarm code that can program other user codes.
Perimeter: The outer edge of the protected area.
Quick Arm: An option that allows you to turn on (ARM) the security system by

pressing either the [STAY] or [EXIT] key on the keypad control (for ARMING
only) as programmed by the installing company.

User Code: A four (4) or six (6) digit entry used to arm or disarm the system.