GE LOGIQ P9P7 Basic Service Manual_SM_5604324_11 SD-650 Ultrasound - User Manual

PRELIMINARY

GE

LOGIQ P9/P7

Service Manual

(JANUARY 24, 2019)
VE6_VE8_COVER.FM

BASIC SERVICE DOCUMENTATION.

COPYRIGHT GENERAL ELECTRIC COMPANY.

ADVANCED SERVICE DOCUMENTATION.

COPYRIGHT GENERAL ELECTRIC COMPANY.

GE CONFIDENTIAL. UNLICENSED USE BY NON-GE PARTIES IS

STRICTLY PROHIBITED.

PROPRIETARY TO GE.

GE RESTRICTED. DISCLOSURE TO NON-GE PARTIES

PROHIBITED.

© 2008, 2010 - 2011 and 2015 - 2017 General Electric Company.

All Rights Reserved.

Document Number: 5604324

Revision: 11

GE LOGIQ P9/P7

WARNING

(EN)

AVERTISSEMENT

(FR)

WARNUNG

(DE)

D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

Important Precautions

TRANSLATION POLICY

THIS SERVICE MANUAL IS AVAILABLE IN ENGLISH ONLY.

• IF A CUSTOMER’S SERVICE PROVIDER REQUIRES A LANGUAGE OTHER
THAN ENGLISH, IT IS THE CUSTOMER’S RESPONSIBILITY TO PROVIDE
TRANSLATION SERVICES.

• DO NOT ATTEMPT TO SERVICE THE EQUIPMENT UNLESS THIS SERVICE
MANUAL HAS BEEN CONSULTED AND IS UNDERSTOOD.

• FAILURE TO HEED THIS WARNING MAY RESULT IN INJURY TO THE SERVICE
PROVIDER, OPERATOR OR PATIENT FROM ELECTRIC SHOCK, MECHANICAL
OR OTHER HAZARDS.

CE MANUEL DE MAINTENANCE N’EST DISPONIBLE QU’EN ANGLAIS.

• SI LE TECHNICIEN DU CLIENT A BESOIN DE CE MANUEL DANS UNE AUTRE
LANGUE QUE L’ANGLAIS, C’EST AU CLIENT QU’IL INCOMBE DE LE FAIRE
TRADUIRE.

• NE PAS TENTER D’INTERVENTION SUR LES ÉQUIPEMENTS TANT QUE LE
MANUEL SERVICE N’A PAS ÉTÉ CONSULTÉ ET COMPRIS.

• LE NON-RESPECT DE CET AVERTISSEMENT PEUT ENTRAÎNER CHEZ LE
TECHNICIEN, L’OPÉRATEUR OU LE PATIENT DES BLESSURES DUES À DES
DANGERS ÉLECTRIQUES, MÉCANIQUES OU AUTRES.

DIESES KUNDENDIENST-HANDBUCH EXISTIERT NUR IN ENGLISCHER
SPRACHE.

• FALLS EIN FREMDER KUNDENDIENST EINE ANDERE SPRACHE BENÖTIGT,
IST ES AUFGABE DES KUNDEN FÜR EINE ENTSPRECHENDE ÜBERSETZUNG
ZU SORGEN.

• VERSUCHEN SIE NICHT, DAS GERÄT ZU REPARIEREN, BEVOR DIESES
KUNDENDIENST-HANDBUCH NICHT ZU RATE GEZOGEN UND VERSTANDEN
WURDE.

• WIRD DIESE WARNUNG NICHT BEACHTET, SO KANN ES ZU VERLETZUNGEN
DES KUNDENDIENSTTECHNIKERS, DES BEDIENERS ODER DES PATIENTEN
DURCH ELEKTRISCHE SCHLÄGE, MECHANISCHE ODER SONSTIGE
GEFAHREN KOMMEN.

- i

GE LOGIQ P9/P7

AVISO

(ES)

ATENÇÃO

(PT-Br)

(PT-pt)

AVISO

AVVERTENZA

(IT)

D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

ESTE MANUAL DE SERVICIO SÓLO EXISTE EN INGLÉS.

• SI ALGÚN PROVEEDOR DE SERVICIOS AJENO A GEHC SOLICITA UN IDIOMA
QUE NO SEA EL INGLÉS, ES RESPONSABILIDAD DEL CLIENTE OFRECER UN
SERVICIO DE TRADUCCIÓN.

• NO SE DEBERÁ DAR SERVICIO TÉCNICO AL EQUIPO, SIN HABER
CONSULTADO Y COMPRENDIDO ESTE MANUAL DE SERVICIO.

• LA NO OBSERVANCIA DEL PRESENTE AVISO PUEDE DAR LUGAR A QUE EL
PROVEEDOR DE SERVICIOS, EL OPERADOR O EL PACIENTE SUFRAN
LESIONES PROVOCADAS POR CAUSAS ELÉCTRICAS, MECÁNICAS O DE
OTRA NATURALEZA.

ESTE MANUAL DE ASSISTÊNCIA TÉCNICA SÓ SE ENCONTRA DISPONÍVEL EM
INGLÊS.

• SE QUALQUER OUTRO SERVIÇO DE ASSISTÊNCIA TÉCNICA, QUE NÃO A
GEHC, SOLICITAR ESTES MANUAIS NOUTRO IDIOMA, É DA
RESPONSABILIDADE DO CLIENTE FORNECER OS SERVIÇOS DE TRADUÇÃO.

• NÃO TENTE REPARAR O EQUIPAMENTO SEM TER CONSULTADO E
COMPREENDIDO ESTE MANUAL DE ASSISTÊNCIA TÉCNICA.

• O NÃO CUMPRIMENTO DESTE AVISO PODE POR EM PERIGO A SEGURANÇA
DO TÉCNICO, OPERADOR OU PACIENTE DEVIDO A‘ CHOQUES ELÉTRICOS,
MECÂNICOS OU OUTROS.

ESTE MANUAL DE ASSISTÊNCIA ESTÁ DISPONÍVEL APENAS EM INGLÊS.

• SE QUALQUER OUTRO SERVIÇO DE ASSISTÊNCIA TÉCNICA, QUE NÃO A
GEHC, SOLICITAR ESTES MANUAIS NOUTRO IDIOMA, É DA
RESPONSABILIDADE DO CLIENTE FORNECER OS SERVIÇOS DE TRADUÇÃO.

• NÃO TENTE EFECTUAR REPARAÇÕES NO EQUIPAMENTO SEM TER
CONSULTADO E COMPREENDIDO PREVIAMENTE ESTE MANUAL.

• A INOBSERVÂNCIA DESTE AVISO PODE RESULTAR EM FERIMENTOS NO
TÉCNICO DE ASSISTÊNCIA, OPERADOR OU PACIENTE EM CONSEQUÊNCIA
DE CHOQUE ELÉCTRICO, PERIGOS DE ORIGEM MECÂNICA, BEM COMO DE
OUTROS TIPOS.

IL PRESENTE MANUALE DI MANUTENZIONE È DISPONIBILE SOLTANTO IN
INGLESE.

• SE UN ADDETTO ALLA MANUTENZIONE ESTERNO ALLA GEHC RICHIEDE IL
MANUALE IN UNA LINGUA DIVERSA, IL CLIENTE È TENUTO A PROVVEDERE
DIRETTAMENTE ALLA TRADUZIONE.

• SI PROCEDA ALLA MANUTENZIONE DELL’APPARECCHIATURA SOLO DOPO
AVER CONSULTATO IL PRESENTE MANUALE ED AVERNE COMPRESO IL
CONTENUTO.

• NON TENERE CONTO DELLA PRESENTE AVVERTENZA POTREBBE FAR
COMPIERE OPERAZIONI DA CUI DERIVINO LESIONI ALL’ADDETTO ALLA
MANUTENZIONE, ALL’UTILIZZATORE ED AL PAZIENTE PER FOLGORAZIONE
ELETTRICA, PER URTI MECCANICI OD ALTRI RISCHI.

ii -

GE LOGIQ P9/P7

HOIATUS

(ET)

VAROITUS

(FI)

ΠΡΟΕΙ∆ΟΠΟΙΗΣΗ

(EL)

FIGYELMEZTETÉS

(HU)

D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

KÄESOLEV TEENINDUSJUHEND ON SAADAVAL AINULT INGLISE KEELES.

• KUI KLIENDITEENINDUSE OSUTAJA NÕUAB JUHENDIT INGLISE KEELEST
ERINEVAS KEELES, VASTUTAB KLIENT TÕLKETEENUSE OSUTAMISE EEST.

• ÄRGE ÜRITAGE SEADMEID TEENINDADA ENNE EELNEVALT KÄESOLEVA
TEENINDUSJUHENDIGA TUTVUMIST JA SELLEST ARU SAAMIST.

• KÄESOLEVA HOIATUSE EIRAMINE VÕIB PÕHJUSTADA TEENUSEOSUTAJA,
OPERAATORI VÕI PATSIENDI VIGASTAMIST ELEKTRILÖÖGI, MEHAANILISE
VÕI MUU OHU TAGAJÄRJEL.

TÄMÄ HUOLTO-OHJE ON SAATAVILLA VAIN ENGLANNIKSI.

• JOS ASIAKKAAN PALVELUNTARJOAJA VAATII MUUTA KUIN
ENGLANNINKIELISTÄ MATERIAALIA, TARVITTAVAN KÄÄNNÖKSEN
HANKKIMINEN ON ASIAKKAAN VASTUULLA.

• ÄLÄ YRITÄ KORJATA LAITTEISTOA ENNEN KUIN OLET VARMASTI LUKENUT
JA YMMÄRTÄNYT TÄMÄN HUOLTO-OHJEEN.

• MIKÄLI TÄTÄ VAROITUSTA EI NOUDATETA, SEURAUKSENA VOI OLLA
PALVELUNTARJOAJAN, LAITTEISTON KÄYTTÄJÄN TAI POTILAAN
VAHINGOITTUMINEN SÄHKÖISKUN, MEKAANISEN VIAN TAI MUUN
VAARATILANTEEN VUOKSI.

ΤΟ ΠΑΡΟΝ ΕΓΧΕΙΡΙ∆ΙΟ ΣΕΡΒΙΣ ∆ΙΑΤΙΘΕΤΑΙ ΣΤΑ ΑΓΓΛΙΚΑ ΜΟΝΟ.

• ΕΑΝ ΤΟ ΑΤΟΜΟ ΠΑΡΟΧΗΣ ΣΕΡΒΙΣ ΕΝΟΣ ΠΕΛΑΤΗ ΑΠΑΙΤΕΙ ΤΟ ΠΑΡΟΝ

ΕΓΧΕΙΡΙ∆ΙΟ ΣΕ ΓΛΩΣΣΑ ΕΚΤΟΣ ΤΩΝ ΑΓΓΛΙΚΩΝ, ΑΠΟΤΕΛΕΙ ΕΥΘΥΝΗ ΤΟΥ
ΠΕΛΑΤΗ ΝΑ ΠΑΡΕΧΕΙ ΥΠΗΡΕΣΙΕΣ ΜΕΤΑΦΡΑΣΗΣ.

• ΜΗΝ ΕΠΙΧΕΙΡΗΣΕΤΕ ΤΗΝ ΕΚΤΕΛΕΣΗ ΕΡΓΑΣΙΩΝ ΣΕΡΒΙΣ ΣΤΟΝ ΕΞΟΠΛΙΣΜΟ
ΕΚΤΟΣ ΕΑΝ

ΕΧΕΤΕ ΣΥΜΒΟΥΛΕΥΤΕΙ ΚΑΙ ΕΧΕΤΕ ΚΑΤΑΝΟΗΣΕΙ ΤΟ ΠΑΡΟΝ

ΕΓΧΕΙΡΙ∆ΙΟ ΣΕΡΒΙΣ.

• ΕΑΝ ∆Ε ΛΑΒΕΤΕ ΥΠΟΨΗ ΤΗΝ ΠΡΟΕΙ∆ΟΠΟΙΗΣΗ ΑΥΤΗ, ΕΝ∆ΕΧΕΤΑΙ ΝΑ
ΠΡΟΚΛΗΘΕΙ ΤΡΑΥΜΑΤΙΣΜΟΣ ΣΤΟ ΑΤΟΜΟ ΠΑΡΟΧΗΣ ΣΕΡΒΙΣ, ΣΤΟ ΧΕΙΡΙΣΤΗ Ή
ΣΤΟΝ ΑΣΘΕΝΗ ΑΠΟ ΗΛΕΚΤΡΟΠΛΗΞΙΑ, ΜΗΧΑΝΙΚΟΥΣ Ή ΑΛΛΟΥΣ ΚΙΝ∆ΥΝΟΥΣ.

EZEN KARBANTARTÁSI KÉZIKÖNYV KIZÁRÓLAG ANGOL NYELVEN ÉRHETŐ EL.

• HA A VEVŐ SZOLGÁLTATÓJA ANGOLTÓL ELTÉRŐ NYELVRE TART IGÉNYT,
AKKOR A VEVŐ FELELŐSSÉGE A FORDÍTÁS ELKÉSZÍTTETÉSE.

• NE PRÓBÁLJA ELKEZDENI HASZNÁLNI A BERENDEZÉST, AMÍG A
KARBANTARTÁSI KÉZIKÖNYVBEN LEÍRTAKAT NEM ÉRTELMEZTÉK.

• EZEN FIGYELMEZTETÉS FIGYELMEN KÍVÜL HAGYÁSA A SZOLGÁLTATÓ,
MŰKÖDTETŐ VAGY A BETEG ÁRAMÜTÉS, MECHANIKAI VAGY EGYÉB
VESZÉLYHELYZET MIATTI SÉRÜLÉSÉT EREDMÉNYEZHETI.

- iii

GE LOGIQ P9/P7

VIÐVÖRUN

(IS)

VÝSTRAHA

(CS)

ADVARSEL

(DA)

WAARSCHUWING

(NL)

D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

ÞESSI ÞJÓNUSTUHANDBÓK ER EINGÖNGU FÁANLEG Á ENSKU.

• EF ÞJÓNUSTUAÐILI VIÐSKIPTAMANNS ÞARFNAST ANNARS TUNGUMÁLS EN
ENSKU, ER ÞAÐ Á ÁBYRGÐ VIÐSKIPTAMANNS AÐ ÚTVEGA ÞÝÐINGU.

• REYNIÐ EKKI AÐ ÞJÓNUSTA TÆKIÐ NEMA EFTIR AÐ HAFA SKOÐAÐ OG
SKILIÐ ÞESSA ÞJÓNUSTUHANDBÓK.

• EF EKKI ER FARIÐ AÐ ÞESSARI VIÐVÖRUN GETUR ÞAÐ VALDIÐ MEIÐSLUM
ÞJÓNUSTUVEITANDA, STJÓRNANDA EÐA SJÚKLINGS VEGNA RAFLOSTS,
VÉLRÆNNAR EÐA ANNARRAR HÆTTU.

TENTO SERVISNÍ NÁVOD EXISTUJE POUZE V ANGLICKÉM JAZYCE.

•VPŘÍPADĚ, ŽE POSKYTOVATEL SLUŽEB ZÁKAZNÍKŮM POTŘEBUJE NÁVOD
V JINÉM JAZYCE, JE ZAJIŠTĚNÍ PŘEKLADU DO ODPOVÍDAJÍCÍHO JAZYKA
ÚKOLEM ZÁKAZNÍKA.

• NEPROVÁDĚJTE ÚDRŽBU TOHOTO ZAŘÍZENÍ, ANIŽ BYSTE SI PŘEČETLI
TENTO SERVISNÍ NÁVOD A POCHOPILI JEHO OBSAH.

•VPŘÍPADĚ NEDODRŽOVÁNÍ TÉTO VÝSTRAHY MŮŽE DOJÍT ÚRAZU
ELEKTRICKÁM PROUDEM PRACOVNÍKA POSKYTOVATELE SLUŽEB,
OBSLUŽNÉHO PERSONÁLU NEBO PACIENTŮ VLIVEM ELEKTRICKÉHOP
PROUDU, RESPEKTIVE VLIVEM K RIZIKU MECHANICKÉHO POŠKOZENÍ NEBO
JINÉMU RIZIKU.

DENNE SERVICEMANUAL FINDES KUN PÅ ENGELSK.

• HVIS EN KUNDES TEKNIKER HAR BRUG FOR ET ANDET SPROG END
ENGELSK, ER DET KUNDENS ANSVAR AT SØRGE FOR OVERSÆTTELSE.

• FORSØG IKKE AT SERVICERE UDSTYRET MEDMINDRE
DENNE SERVICEMANUAL ER BLEVET LÆST OG FORSTÅET.

• MANGLENDE OVERHOLDELSE AF DENNE ADVARSEL KAN MEDFØRE SKADE
PÅ GRUND AF ELEKTRISK, MEKANISK ELLER ANDEN FARE FOR
TEKNIKEREN, OPERATØREN ELLER PATIENTEN.

DEZE ONDERHOUDSHANDLEIDING IS ENKEL IN HET ENGELS VERKRIJGBAAR.

• ALS HET ONDERHOUDSPERSONEEL EEN ANDERE TAAL VEREIST, DAN IS DE
KLANT VERANTWOORDELIJK VOOR DE VERTALING ERVAN.

• PROBEER DE APPARATUUR NIET TE ONDERHOUDEN VOORDAT DEZE
ONDERHOUDSHANDLEIDING WERD GERAADPLEEGD EN BEGREPEN IS.

• INDIEN DEZE WAARSCHUWING NIET WORDT OPGEVOLGD, ZOU HET
ONDERHOUDSPERSONEEL, DE OPERATOR OF EEN PATIËNT GEWOND
KUNNEN RAKEN ALS GEVOLG VAN EEN ELEKTRISCHE SCHOK,
MECHANISCHE OF ANDERE GEVAREN.

iv -

GE LOGIQ P9/P7

BRĪDINĀJUMS

(LV)

ĮSPĖJIMAS

(LT)

ADVARSEL

(NO)

OSTRZEŻENIE

(PL)

D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

ŠĪ APKALPES ROKASGRĀMATA IR PIEEJAMA TIKAI ANGĻU VALODĀ.

• JA KLIENTA APKALPES SNIEDZĒJAM NEPIECIEŠAMA INFORMĀCIJA CITĀ
VALODĀ, NEVIS ANGĻU, KLIENTA PIENĀKUMS IR NODROŠINĀT TULKOŠANU.

• NEVEICIET APRĪKOJUMA APKALPI BEZ APKALPES ROKASGRĀMATAS
IZLASĪŠANAS UN SAPRAŠANAS.

•ŠĪ BRĪDINĀJUMA NEIEVĒROŠANA VAR RADĪT ELEKTRISKĀS STRĀVAS
TRIECIENA, MEHĀNISKU VAI CITU RISKU IZRAISĪTU TRAUMU APKALPES
SNIEDZĒJAM, OPERATORAM VAI PACIENTAM.

ŠIS EKSPLOATAVIMO VADOVAS YRA IŠLEISTAS TIK ANGLŲ KALBA.

• JEI KLIENTO PASLAUGŲ TEIKĖJUI REIKIA VADOVO KITA KALBA – NE ANGLŲ,
VERTIMU PASIRŪPINTI TURI KLIENTAS.

•NEMĖGINKITE ATLIKTI ĮRANGOS TECHNINĖS PRIEŽIŪROS DARBŲ, NEBENT
VADOVAUTUMĖTĖS ŠIUO EKSPLOATAVIMO VADOVU IR JĮ SUPRASTUMĖTE

• NEPAISANT ŠIO PERSPĖJIMO, PASLAUGŲ TEIKĖJAS, OPERATORIUS AR
PACIENTAS GALI BŪTI SUŽEISTAS DĖL ELEKTROS SM

ŪGIO, MECHANINIŲ AR

KITŲ PAVOJŲ.

DENNE SERVICEHÅNDBOKEN FINNES BARE PÅ ENGELSK.

• HVIS KUNDENS SERVICELEVERANDØR TRENGER ET ANNET SPRÅK, ER DET
KUNDENS ANSVAR Å SØRGE FOR OVERSETTELSE.

• IKKE FORSØK Å REPARERE UTSTYRET UTEN AT DENNE
SERVICEHÅNDBOKEN ER LEST OG FORSTÅTT.

• MANGLENDE HENSYN TIL DENNE ADVARSELEN KAN FØRE TIL AT
SERVICELEVERANDØREN, OPERATØREN ELLER PASIENTEN SKADES PÅ
GRUNN AV ELEKTRISK STØT, MEKANISKE ELLER ANDRE FARER.

NINIEJSZY PODRĘCZNIK SERWISOWY DOSTĘPNY JEST JEDYNIE W JĘZYKU
ANGIELSKIM.

•JEŚLI FIRMA ŚWIADCZĄCA KLIENTOWI USŁUGI SERWISOWE WYMAGA
UDOSTĘPNIENIA PODRĘCZNIKA W JĘZYKU INNYM NIŻ ANGIELSKI,
OBOWIĄZEK ZAPEWNIENIA STOSOWNEGO TŁUMACZENIA SPOCZYWA NA
KLIENCIE.

• NIE PRÓBOWAĆ SERWISOWAĆ NINIEJSZEGO SPRZĘTU BEZ UPRZEDNIEGO
ZAPOZNANIA SIĘ Z PODRĘCZNIKIEM SERWISOWYM.

• NIEZASTOSOWANIE SIĘ DO TEGO OSTRZEŻENIA MOŻE GROZIĆ
OBRAŻENIAMI CIAŁA SERWISANTA, OPERATORA LUB PACJENTA W WYNIKU
PORAŻENIA PRĄDEM, URAZU MECHANICZNEGO LUB INNEGO RODZAJU
ZAGROŻEŃ.

- v

GE LOGIQ P9/P7

ATE NŢIE

(RO)

ОСТОРОЖНО!

(RU)
(BG)

ПРЕДУПРЕЖДЕНИЕ

UPOZORENJE

(SR)

D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

ACEST MANUAL DE SERVICE ESTE DISPONIBIL NUMAI ÎN LIMBA ENGLEZĂ.

• DACĂ UN FURNIZOR DE SERVICII PENTRU CLIENŢI NECESITĂ O ALTĂ LIMBĂ
DECÂT CEA ENGLEZĂ, ESTE DE DATORIA CLIENTULUI SĂ FURNIZEZE O
TRADUCERE.

• NU ÎNCERCAŢI SĂ REPARAŢI ECHIPAMENTUL DECÂT ULTERIOR
CONSULTĂRII ŞI ÎNŢELEGERII ACESTUI MANUAL DE SERVICE.

• IGNORAREA ACESTUI AVERTISMENT AR PUTEA DUCE LA RĂNIREA
DEPANATORULUI, OPERATORULUI SAU PACIENTULUI ÎN URMA
PERICOLELOR DE ELECTROCUTARE, MECANICE SAU DE ALTĂ NATURĂ.

ДАННОЕ РУКОВОДСТВО ПО ОБСЛУЖИВАНИЮ ПРЕДОСТАВЛЯЕТСЯ ТОЛЬКО
НА АНГЛИЙСКОМ ЯЗЫКЕ.

• ЕСЛИ СЕРВИСНОМУ ПЕРСОНАЛУ КЛИЕНТА НЕОБХОДИМО РУКОВОДСТВО
НЕ НА АНГЛИЙСКОМ ЯЗЫКЕ, КЛИЕНТУ СЛЕДУЕТ САМОСТОЯТЕЛЬНО
ОБЕСПЕЧИТЬ ПЕРЕВОД.

• ПЕРЕД ОБСЛУЖИВАНИЕМ ОБОРУДОВАНИЯ ОБЯЗАТЕЛЬНО

ОБРАТИТЕСЬ

К ДАННОМУ РУКОВОДСТВУ И ПОЙМИТЕ ИЗЛОЖЕННЫЕ В НЕМ СВЕДЕНИЯ.

• НЕСОБЛЮДЕНИЕ УКАЗАННЫХ ТРЕБОВАНИЙ МОЖЕТ ПРИВЕСТИ К ТОМУ,

ЧТО СПЕЦИАЛИСТ ПО ТЕХОБСЛУЖИВАНИЮ, ОПЕРАТОР ИЛИ ПАЦИЕНТ
ПОЛУЧАТ УДАР ЗЛЕКТРИЧЕСКИМ ТОКОМ, МЕХАНИЧЕСКУЮ ТРАВМУ ИЛИ
ДРУГОЕ ПОВРЕЖДЕНИЕ.

ТОВА СЕРВИЗНО РЪКОВОДСТВО Е НАЛИЧНО САМО НА АНГЛИЙСКИ ЕЗИК.

• АКО ДОСТАВЧИКЪТ НА СЕРВИЗНИ УСЛУГИ НА КЛИЕНТ

СЕ НУЖДАЕ ОТ
ЕЗИК, РАЗЛИЧЕН ОТ АНГЛИЙСКИ, ЗАДЪЛЖЕНИЕ НА КЛИЕНТА Е ДА
ПРЕДОСТАВИ ПРЕВОДАЧЕСКА УСЛУГА.

• НЕ СЕ ОПИТВАЙТЕ ДА ИЗВЪРШВАТЕ СЕРВИЗНО ОБСЛУЖВАНЕ НА ТОВА
ОБОРУДВАНЕ, ОСВЕН ВСЛУЧАЙ, ЧЕ СЕРВИЗНОТО РЪКОВОДСТВО Е
ПРОЧЕТЕНО И СЕ РАЗБИРА.

• НЕСПАЗВАНЕТО НА ТОВА ПРЕДУПРЕЖДЕНИЕ МОЖЕ ДА ДОВЕДЕ ДО
НАРАНЯВАНЕ НА ДОСТАВЧИКА НА СЕРВИЗНИ УСЛУГИ, НА

ОПЕРАТОРА
ИЛИ ПАЦИЕНТА ВСЛЕДСТВИЕНА ТОКОВ УДАР, МЕХАНИЧНИ ИЛИ ДРУГИ
РИСКОВЕ.

OVAJ PRIRUČNIK ZA SERVISIRANJE DOSTUPAN JE SAMO NA ENGLESKOM
JEZIKU.

• AKO KLIJENTOV SERVISER ZAHTEVA JEZIK KOJI NIJE ENGLESKI,

ODGOVORNOST JE NA KLIJENTU DA PRUŽI USLUGE PREVOĐENJA.

• NEMOJTE POKUŠAVATI DA SERVISIRATE OPREMU AKO NISTE PROČITALI I
RAZUMELI PRIRUČNIK ZA SERVISIRANJE.

• AKO NE POŠTUJETE OVO UPOZORENJE, MOŽE DOĆI DO POVREĐIVANJA
SERVISERA, OPERATERA ILI PACIJENTA UZROKOVANOG ELEKTRIČNIM
UDAROM, MEHANIČKIM I DRUGIM OPASNOSTIMA.

vi -

GE LOGIQ P9/P7

OPOZORILO

(SL)

UPOZORENJE

(HR)

UPOZORNENIE

(SK)

VARNING

(SV)

D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

TA SERVISNI PRIROČNIK JE NA VOLJO SAMO V ANGLEŠČINI.

• ČE PONUDNIK SERVISNIH STORITEV ZA STRANKO POTREBUJE NAVODILA V

DRUGEM JEZIKU, JE ZA PREVOD ODGOVORNA STRANKA SAMA.

• NE POSKUŠAJTE SERVISIRATI OPREME, NE DA BI PREJ PREBRALI IN

RAZUMELI SERVISNI PRIROČNIK.

• ČE TEGA OPOZORILA NE UPOŠTEVATE, OBSTAJA NEVARNOST
ELEKTRIČNEGA UDARA, MEHANSKIH ALI DRUGIH NEVARNOSTI IN
POSLEDIČNIH POŠKODB PONUDNIKA SERVISNIH STORITEV, UPORABNIKA
OPREME ALI PACIENTA.

OVAJ SERVISNI PRIRUČNIK DOSTUPAN JE SAMO NA ENGLESKOM JEZIKU.

• AKO KLIJENTOV SERVISER ZAHTIJEVA JEZIK KOJI NIJE ENGLESKI,
ODGOVORNOST KLIJENTA JE PRUŽITI USLUGE PREVOĐENJA.

• NEMOJTE POKUŠAVATI SERVISIRATI OPREMU AKO NISTE PROČITALI I
RAZUMJELI SERVISNI PRIRUČNIK.

• AKO NE POŠTUJETE OVO UPOZORENJE, MOŽE DOĆI DO OZLJEDE
SERVISERA, OPERATERA ILI PACIJENTA PROUZROČENE STRUJNIM
UDAROM, MEHANIČKIM I DRUGIM OPASNOSTIMA.

TÁTO SERVISNÁ PRÍRUČKA JE K DISPOZÍCII LEN V ANGLIČTINE.

• AK ZÁKAZNÍKOV POSKYTOVATEĽ SLUŽIEB VYŽADUJE INÝ JAZYK AKO
ANGLIČTINU, POSKYTNUTIE PREKLADATEĽSKÝCH SLUŽIEB JE
ZODPOVEDNOSŤOU ZÁKAZNÍKA.

• NEPOKÚŠAJTE SA VYKONÁVAŤ SERVIS ZARIADENIA SKÔR, AKO SI
NEPREČÍTATE SERVISNÚ PRÍRUČKU A NEPOROZUMIETE JEJ.

• ZANEDBANIE TOHTO UPOZORNENIA MÔŽE VYÚSTIŤ DO ZRANENIA
POSKYTOVATEĽA SLUŽIEB, OBSLUHUJÚCEJ OSOBY ALEBO PACIENTA
ELEKTRICKÝM PRÚDOM, PRÍPADNE DO MECHANICKÉHO ALEBO INÉHO
NEBEZPEČENSTVA.

DEN HÄR SERVICEHANDBOKEN FINNS BARA TILLGÄNGLIG PÅ ENGELSKA.

• OM EN KUNDS SERVICETEKNIKER HAR BEHOV AV ETT ANNAT SPRÅK ÄN
ENGELSKA ANSVARAR KUNDEN FÖR ATT TILLHANDAHÅLLA
ÖVERSÄTTNINGSTJÄNSTER.

• FÖRSÖK INTE UTFÖRA SERVICE PÅ UTRUSTNINGEN OM DU INTE HAR LÄST
OCH FÖRSTÅR DEN HÄR SERVICEHANDBOKEN.

• OM DU INTE TAR HÄNSYN TILL DEN HÄR VARNINGEN KAN DET RESULTERA I
SKADOR PÅ SERVICETEKNIKERN, OPERATÖREN ELLER PATIENTEN TILL
FÖLJD AV ELEKTRISKA STÖTAR, MEKANISKA FAROR ELLER ANDRA FAROR.

- vii

GE LOGIQ P9/P7

DİKKAT

(TR)

(JA)

Traditional

Chinese

D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

BU SERVİS KILAVUZU YALNIZCA İNGİLİZCE OLARAK SAĞLANMIŞTIR.

•EĞER MÜŞTERİ TEKNİSYENİ KILAVUZUN İNGİLİZCE DIŞINDAKİ BİR DİLDE
OLMASINI İSTERSE, KILAVUZU TERCÜME ETTİRMEK MÜŞTERİNİN
SORUMLULUĞUNDADIR.

•SERVİS KILAVUZUNU OKUYUP ANLAMADAN EKİPMANLARA MÜDAHALE
ETMEYİNİZ.

• BU UYARININ GÖZ ARDI EDİLMESİ, ELEKTRİK ÇARPMASI YA DA MEKANİK
VEYA DİĞER TÜRDEN KAZALAR SONUCUNDA TEKNİSYENİN, OPERATÖRÜN
YA DA HASTANIN YARALANMASINA YOL AÇABİLİR.

viii -

GE LOGIQ P9/P7

(ZH-CN)

(KO)

D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

- ix

GE LOGIQ P9/P7

DANGER

WARNINGWARNING

D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

DAMAGE IN TRANSPORTATION

All packages should be closely examined at time of delivery. If damage is apparent write “Damage In
Shipment” on ALL copies of the freight or express bill BEFORE delivery is accepted or “signed for” by
a GE representative or hospital receiving agent. Whether noted or concealed, damage MUST be
reported to the carrier immediately upon discovery, or in any event, within 14 days after receipt, and the
contents and containers held for inspection by the carrier. A transportation company will not pay a claim
for damage if an inspection is not requested within this 14 day period.

CERTIFIED ELECTRICAL CONTRACTOR STATEMENT - FOR USA ONLY

All electrical Installations that are preliminary to positioning of the equipment at the site prepared for the
equipment shall be performed by licensed electrical contractors. Other connections between pieces of
electrical equipment, calibrations and testing shall be performed by qualified GE Healthcare personnel.
In performing all electrical work on these products, GE will use its own specially trained field engineers.
All of GE’s electrical work on these products will comply with the requirements of the applicable
electrical codes.

The purchaser of GE equipment shall only utilize qualified personnel (i.e., GE’s field engineers,
personnel of third-party service companies with equivalent training, or licensed electricians) to perform
electrical servicing on the equipment.

OMISSIONS & ERRORS

If there are any omissions, errors or suggestions for improving this documentation, please contact the
GE Healthcare Global Documentation Group with specific information listing the system type, manual
title, part number, revision number, page number and suggestion details.
Mail the information to:Service Documentation, 9900 Innovation Drive (RP-2123), Wauwatosa,
WI53226, USA.

GE Healthcare employees should use TrackWise to report service documentation issues. These issues
will then be in the internal problem reporting tool and communicated to the writer.

SERVICE SAFETY CONSIDERATIONS

DANGEROUS VOLTAGES, CAPABLE OF CAUSING DEATH, ARE PRESENT IN
THIS EQUIPMENT. USE EXTREME CAUTION WHEN HANDLING, TESTING AND
ADJUSTING.

Use all Personal Protection Equipment (PPE) such as gloves, safety shoes, safety
glasses, and kneeling pad, to reduce the risk of injury.

For a complete review of all safety requirements, see the Chapter 1, Safety Considerations section in
the Service Manual.

x -

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

LEGAL NOTES

The contents of this publication may not be copied or duplicated in any form, in whole or in part, without
prior written permission of GE Healthcare.

GE Healthcare may revise this publication from time to time without written notice.

TRADEMARKS

All products and their name brands are trademarks of their respective holders.

COPYRIGHTS

All Material Copyright© 2018 by General Electric Company Inc. All Rights Reserved.

- xi

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

Revision History

Revision Date Reason for change

1 October 2014 Initial release

2 December 2014 Enhancement feedback

3 May 2015 Enhancement feedback

4 March 2016 Initial release for R2

5 August 2016 Correction

6 November 2016 Initial release for R2.5

7 July 2017 Enhancement feedback

8 June 2018 Enhancement feedback

9 August 2018 Enhancement feedback

10 October 2018 Enhancement feedback

11 January 2019 Enhancement feedback

List of Effected Pages (LOEP)

Pages Revision Pages Revision Pages Revision

Title Page 11 3-1 to 3-78 11 8-1 to 8-206 11

Warnings i to ii-xii 11 4-1 to 4-44 11 9-1 to 9-32 11

TOC 11 5-1 to 5-152 11 10-1 to 10-36 11

1-1 to 1-17 11 6-1 to 6-8 11 Back Cover N/A

2-1 to 2-10 11 7-1 to 7-36 11

xii -

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

Table of Contents

CHAPTER 1

Introduction

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Purpose of Chapter 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Purpose of Service Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Typical Users of the Basic Service Manual . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

Models Covered by this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

Purpose of Operator Manual(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3

Important Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3

Conventions Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3

Standard Hazard Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 4

Product Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 5

Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 8

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 8

Human Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 8

Mechanical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 8

Electrical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 9

Safe Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 9

Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 9

Auxiliary Devices Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 10

Battery Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 12

Labels Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 13

Dangerous Procedure Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 15

Lockout/Tagout Requirements (For USA Only) . . . . . . . . . . . . . . . . . . . . . . 1 - 15

Returning/Shipping System, Probes and Repair Parts . . . . . . . . . . . . . . . . 1 - 15

Electromagnetic Compatibility (EMC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 16

What is EMC? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 16

Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 16

Electrostatic Discharge (ESD) Prevention . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 16

Customer Assistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 17

Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 17

System Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 17

xiii Table of Contents

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

CHAPTER 2

Site Preparation

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1

Purpose of Chapter 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1

General Console Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

LOGIQ P9/P7 Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

Inrush Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

Site Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

Site Power Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

Main Power Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

EMI Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4

Probe Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 5

Time and Manpower Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 5

System Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 6

Physical Dimensions of LOGIQ P9/P7 . . . . . . . . . . . . . . . . . . . . . . . 2 - 6

Acoustic Noise Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 6

Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 6

Facility Needs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 7

Purchaser Responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 7

Mandatory Site Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 8

Site Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 8

Recommended Ultrasound Room Layout . . . . . . . . . . . . . . . . . . . . . 2 - 9

Networking Setup Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 10

Stand-alone Unit (without Network Connection) . . . . . . . . . . . . . . . . 2 - 10

Unit Connected to Hospital’s Network . . . . . . . . . . . . . . . . . . . . . . . . 2 - 10

Purpose of the DICOM Network Function . . . . . . . . . . . . . . . . . . . . . 2 - 10

DICOM Option Pre-installation Requirements . . . . . . . . . . . . . . . . . . 2 - 10

xiv Table of Contents

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

CHAPTER 3

Setup Instructions

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1

The Purpose of Chapter 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1

Set Up Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2

Average Installation Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2

Installation Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3

Moving/Lifting the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3

System Acclimation Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3

OPIO Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3

Brake Pedal Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4

Safety Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4

Receiving and Unpacking the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5

Packing materials - recycling information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 8

Preparing for Set Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 9

Verify Customer Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 9

EMI Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 10

Connection of Auxiliary Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 11

Connecting the LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 12

Connecting the Black & White Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 13

Connection Scheme: B&W Printer . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14

Connecting the Secondary “Patient” LCD Monitor . . . . . . . . . . . . . . . . . . . 3 - 15

Connecting the Footswitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 17

Connecting the USB Flash Memory Stick . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 18

Connecting the external USB Hard disk (Handydrive) . . . . . . . . . . . . . . . . 3 - 18

General Remarks and Hints when using external USB-Devices . . . . . . . . 3 - 19

External USB-Devices - Connection . . . . . . . . . . . . . . . . . . . . . . . . 3 - 19

External USB-Devices - Disconnection . . . . . . . . . . . . . . . . . . . . . 3 - 19

Completing the Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 20

Connecting the Unit to a Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 20

Power On / Boot Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 21

Scanner Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 21

Back End Processor Boot Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 22

During a normal boot, you may observe . . . . . . . . . . . . . . . . . . . . . 3 - 23

Power Off / Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 25

Scanner Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 27

Transducer Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 30

Table of Contents xv

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

Connecting the Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 30

Connecting the CW Pencil Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 31

Cable Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 31

Activating the Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 31

Deactivating the Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 31

Disconnecting the Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 31

Printer Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 32

Installing Digital Black & White Printer Sony UP-D898 . . . . . . . . . . . . . . . . 3 - 32

Digital Color Printer Sony UP-D25MD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 33

Installing the Bluetooth Deskjet Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 34

Connecting the Bluetooth Dongle into the System . . . . . . . . . . . . . . 3 - 34

Verifying Bluetooth device driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 35

Prepare the Printer and connect the Bluetooth Printer Adapter . . . . 3 - 36

HP Officejet 100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 36

Bluetooth Pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 36

Adding Printer to the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 37

Adjustment of Printer Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 37

UP-D898 - Printer Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 38

UP-D25MD - Printer Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 39

Setting Printer to Print Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 41

Setting up the Printer to Print Reports . . . . . . . . . . . . . . . . . . . . . . . . 3 - 41

System Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 42

System/General Preset Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 42

External I/O Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 46

Available Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 47

Supported probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 47

Probe Naming Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 47

Probe Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 47

Software/Option Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 53

Connectivity Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 54

Connectivity Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 54

The Dataflow Concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 54

Dataflow Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 55

Stand-alone LOGIQ P9/P7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 56

LOGIQ? + PC within a “Sneaker Net” . . . . . . . . . . . . . . . . . . . . . . . 3 - 56

Connection between LOGIQ? and DICOM Server . . . . . . . . . . . . . . 3 - 56

Wired Ethernet from LOGIQ P9/P7 to a Workstation . . . . . . . . . . . . . . . . . . 3 - 57

Direct Cable Connection from the LOGIQ P9/P7 to a Workstation via

a Crossover Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 57

Connection via a Peer-to-Peer Network . . . . . . . . . . . . . . . . . . . . . . 3 - 57

Connection via Hospital Network . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 57

xvi Table of Contents

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

You will need one network cable to connect the LOGIQ P9/P7

to a wall outlet on the hospital’s network. . . . . . . . . . . . . . . . . . . . . 3 - 57

Connection using Wireless Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 57

Configuring Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 58

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 58

Structured Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 58

Supported parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 58

Connectivity Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 59

TCPIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 60

Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 62

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 63

Adding a service to a destination device . . . . . . . . . . . . . . . . . . . . . 3 - 63

Removing a service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 63

Changing parameters for a service . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 64

Agent Configuration (R3 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 65

Agent Configuration (R3 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 65

Agent Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 65

Verifying Back Office Connection - CSD . . . . . . . . . . . . . . . . . . . . . 3 - 67

Verifying Back Office Connection – VOC . . . . . . . . . . . . . . . . . . . . . 3 - 68

Connectivity Setup Worksheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 70

Paperwork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 72

Product Locator Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 72

User Manual(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 72

Table of Contents xvii

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

CHAPTER 4

Functional Checks

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1

Purpose of Chapter 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1

Required Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1

General Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 3

System Exterior Visual Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 4

Physical Abnormalities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 4

Appearance Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5

Appearance Inspection (R3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6

Mechanical Parts Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 7

Main LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 8

LCD ARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 9

OPIO Swivel Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 10

Swivel/Brake Lock Caster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 11

Swivel/Brake Lock Caster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 12

Power On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 13

Scanner Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 13

Sleep Mode Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 15

Complete power down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 16

Power Off / Shutdown Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 17

System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 18

Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 18

Service Platform Confirmation (R1, R2, R2.5 only) . . . . . . . . . . . . . . 4 - 19

USB Port Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 20

System Integration Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 21

OPIO Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 21

DVD Drive Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 22

LAN Port Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 22

Peripheral Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 23

DVR Test (if equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 23

Black and White Printer Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 23

Color Printer Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 23

CD/DVD Read/WriteTest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 23

ECG Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 23

Gel Warmer Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 24

Single CWD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 24

Mode Transition Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 24

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 24

B-Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 26

Color Flow-Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 27

Pulse Doppler Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 28

B/CF/PW Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 28

xviii Table of Contents

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

M-Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 30

B-Flow Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 30

CW Mode (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 31

WLAN (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 32

4D Mode (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 32

Power Assistant (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 32

OPIO Interface Check (R1, R2, R2.5 only) . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 33

OPIO Interface Check (R3 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 36

Touch Panel Calibration (R3 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 39

Board Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 42

Table of Contents xix

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

CHAPTER 5

Components and Functions (Theory)

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 1

Purpose of Chapter 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 1

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2

System Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2

Operator Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3

System Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 5

System Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6

Front USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 7

Rear USB and LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 7

HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 9

S-Video / Composite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 10

AC Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 11

Power ON Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 12

Software Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 13

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 13

Smart Devices Applications (LOGIQ Apps) . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 16

Hardware Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 17

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 17

Regional and Peripheral Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 19

Regional Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 19

Peripheral Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 19

Mechanical Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 20

Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 20

LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 20

OPIO Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 20

Air Flow Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 21

Exiting to Windows Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 22

Exiting to Windows Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 22

Service Platform. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 24

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 24

Access / Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 24

Local Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 24

How the Customer enables/disables Disruptive Mode and VCO . . . 5 - 25

xx Table of Contents

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

Common Service Desktop (CSD) (R1, R2, R2.5 only) . . . . . . . . . . . . . . . . . . . . . . 5 - 26

Internationalization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 26

CSD Top Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 27

General Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 27

Decoding System Temperature and Voltage . . . . . . . . . . . . . . . . . . 5 - 28

Error Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 30

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 30

Image Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 31

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 32

Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 33

Disk Defragmenter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 33

Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 35

PM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 35

Common Service Desktop (R3 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 36

Purpose of this section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 36

Disruptive mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 36

Color statuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 37

Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 37

Advanced Information - Service Desktop and SSA

(Secure Service Access) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 41

Home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 42

Diags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 64

DICOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 69

Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 73

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 99

Agent Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 101

Table of Contents xxi

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

CHAPTER 6

Service Adjustments

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1

Purpose of Chapter 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1

Regulatory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1

LCD Monitor Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 2

Brightness/Contrast (R1.x.x) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 4

Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 4

Gamma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 4

OSD Control on the Utility mode (R1.x.x) . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 5

21.5 inch Wide Monitor Adjustment (R2.x.x and later) . . . . . . . . . . . . . . . . . 6 - 6

Scan Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 8

Room Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 8

Color Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 8

xxii Table of Contents

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

CHAPTER 7

Diagnostics/Troubleshooting

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1

Purpose of Chapter 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1

Collect Vital System Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 2

Collecting System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 2

Request for Service (RFS) (R1, R2, R2.5 only) . . . . . . . . . . . . . . . . . . . . . 7 - 3

Request for Service (RFS) (R3 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 5

Request for Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 5

Check Points Voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 7

LED for Power Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 7

Screen Captures and Logs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 8

Capturing a screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 8

Export Log’s and System Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 8

Export System Data (by pressing the ALT + D key) . . . . . . . . . . . . 7 - 8

System Warning/Errors and Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 9

Temperature warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 9

Cause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 9

What to do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 9

Temperature exceeded threshold . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 9

Cause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 9

What to do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 9

Log message of the high temperature . . . . . . . . . . . . . . . . . 7 - 9

System voltage failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 10

Cause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 10

What to Do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 10

Log message of the Voltage error . . . . . . . . . . . . . . . . . . . . . 7 - 10

Hardware configuration error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 11

Cause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 11

What to do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 11

Log message of the Invalid hardware error . . . . . . . . . . . . . . 7 - 11

System Error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 12

Cause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 12

What to do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 12

Log message of System error 13

Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 13

Remote Access to Service Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 15

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 15

How the Customer enables/disables Disruptive Mode and VCO . . . . . . . . 7 - 16

Table of Contents xxiii

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

GE Icon and Remote Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 16

Customer Granting Full Remote Access Permission to

GE Service Technician . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 17

If GE Service Technician requests Remote Access Permission . . . . 7 - 17

Common Service Desktop (CSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 18

CSD: Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 18

Minimum Configuration to Boot/Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 19

Troubleshooting Trees, Instructions and Tech Tips. . . . . . . . . . . . . . . . . . . . . . . . . 7 - 20

System does not boot up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 21

Noise disturbs the image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 22

Trackball - Impaired Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 23

Printer Malfunction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 24

Monitor Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 25

How to import patient data base from older consoles . . . . . . . . . . . . . . . . . 7 - 25

EZbackup will not delete images to open disk space . . . . . . . . . . . . . . . . . . 7 - 25

Use ScLogWindow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 26

SSA key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 29

Log analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 30

xxiv Table of Contents

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

CHAPTER 8

Replacement Procedures

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1

Purpose of Chapter 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1

Returning/Shipping System, Probes and Repair Parts . . . . . . . . . . . . . . . . 8 - 4

Warnings and important information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 5

Purpose of this section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 5

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 5

Returning/Shipping Probes and Repair Parts . . . . . . . . . . . . . . . . . . . . . . . 8 - 6

System Software - Installation/Upgrade Procedure . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

General Notes on LOGIS P7/P9 Software Loading . . . . . . . . . . . . . 8 - 7

Preparation for Software Loading . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9

Recording important settings and parameters (optional) . . . 8 - 9

System Software - Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 25

Software Installation from DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 26

System Software - Installation Procedure (R1.x.x) . . . . . . . . . . . . . 8 - 26

System Software - Installation Procedure (R2.x.x) . . . . . . . . . . . . . 8 - 32

System Software - Installation Procedure (R3.x.x) . . . . . . . . . . . . . 8 - 38

Set the system boot order (BIOS setting) . . . . . . . . . . . . . . . 8 - 38

Base and Application Software installation . . . . . . . . . . . . . . 8 - 40

Application Software Load Procedure . . . . . . . . . . . . . . . . . . 8 - 42

Application Software Installation Preparation (R1.x.x or R2.x.x) . . . 8 - 43

Application Software Installation (R1.x.x or R2.x.x) . . . . . . . . . . . . . 8 - 44

Software DVD / USB Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 46

Software Installation from Common Service Desktop (R1.x.x or R2.x.x) . 8 - 48

Involking Software Reload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 48

Software Installation from Common Service Desktop (R3.x.x) . . . . . . . . . . 8 - 51

System Setup Procedure to display the messages in Japanese/Chinese . 8 - 52

Software and Functional Checks after Installation Procedure . . . . . . . . . . . . . . . . 8 - 56

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 56

Settings - Backup and Restore. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 57

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 58

Supported Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 58

General Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 58

Table of Contents xxv

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

Backup Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 58

Restore Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 59

EZBackup and EZMove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 59

EZBackup and EZMove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 59

To review EZBackup and EZMove . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 60

Option Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 61

Replacement of Front Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 62

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 62

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 62

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 62

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 63

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 63

Replacement of Top Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 64

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 64

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 64

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 64

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 65

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 65

Replacement of Side Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 66

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 66

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 66

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 66

Removal Procedure - Side Cover (L) . . . . . . . . . . . . . . . . . . . . . . . . 8 - 66

Removal Procedure - Side Cover (R) . . . . . . . . . . . . . . . . . . . . . . . . 8 - 68

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 69

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 69

Replacement of Rear Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 70

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 70

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 70

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 70

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 70

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 70

Replacement of Side Tray & Foot Rest Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 71

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 71

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 71

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 71

Removal Procedure - Side Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 71

Removal Procedure - Foot Rest Cover . . . . . . . . . . . . . . . . . . . . . . . 8 - 72

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 72

xxvi Table of Contents

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

Replacement of Monitor and LCD Arm Plastic Covers. . . . . . . . . . . . . . . . . . . . . . 8 - 73

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 73

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 73

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 73

Monitor Remove Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 73

Monitor Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 75

LCD Arm Plastic Covers Remove Procedure . . . . . . . . . . . . . . . . . . . . . . . 8 - 76

LCD Arm Plastic Covers Installation Procedure . . . . . . . . . . . . . . . . . . . . . 8 - 77

Replacement of Monitor Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 78

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 78

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 78

Pre-Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 78

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 78

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 79

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 79

Replacement of Fixed Arm Cover and Fixed Arm Holder Grip. . . . . . . . . . . . . . . . 8 - 80

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 80

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 80

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 80

Removal Procedure - Fixed Arm Cover . . . . . . . . . . . . . . . . . . . . . . 8 - 80

Removal Procedure - Fixed Arm Holder Grip . . . . . . . . . . . . . . . . . 8 - 80

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 81

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 81

Replacement of OPIO and Related Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 82

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 82

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 82

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 82

Removal Procedure - Trackball Ring . . . . . . . . . . . . . . . . . . . . . . . . 8 - 83

Removal Procedure - OP Panel Assy . . . . . . . . . . . . . . . . . . . . . . . 8 - 83

Removal Procedure - AN Keyboard (Option) . . . . . . . . . . . . . . . . . . 8 - 86

Removal Procedure - Trackball . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 87

Removal Procedure - LCD Touch Panel Assy . . . . . . . . . . . . . . . . . 8 - 88

Removal Procedure - Freeze key assy . . . . . . . . . . . . . . . . . . . . . . 8 - 89

Removal Procedure - OP Panel Main PWA Assy . . . . . . . . . . . . . . 8 - 90

Removal Procedure - Encoder on PWA . . . . . . . . . . . . . . . . . . . . . 8 - 93

Removal Procedure - Touch panel . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 93

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 94

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 95

Replacement of the Caps for Hardkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 96

Table of Contents xxvii

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 96

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 96

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 96

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 96

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 97

Replacement of Key Caps (by special native language keys) . . . . . . . . . . . . . . . . . 8 - 98

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 98

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 98

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 98

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 98

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 99

Replacement Checking Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 99

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 100

Replacement around Nest Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 101

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 101

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 101

Pre-Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 101

Nest Box Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 101

Removal Procedure - Nest Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 103

Installation Procedure - Nest Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 104

Removal Procedure - Board Assy in Nest Box . . . . . . . . . . . . . . . . . . . . . . 8 - 105

Removal Procedure - Separating MPI and MCB . . . . . . . . . . . . . . . . . . . . . 8 - 107

Removal Procedure - Separating DCWD Board(Option) from MPI . . . . . . . 8 - 108

Separating MDC assy from MCB assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 109

Handling EEPROM on MCB Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 110

Separating MCB assy from Brackets and COM Express . . . . . . . . . . . . . . . 8 - 111

Separating DC4D Unit from IO BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 113

Separating Battery Unit from IO BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 114

Separating HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 115

Separating COM Express . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 116

Installation Procedure - MPI, MCB, MDC, DC4D, HDD, Battery and

COM Express . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 117

Functional Check - MPI, MCB, MDC, IO Box . . . . . . . . . . . . . . . . . . . . . . . . 8 - 117

Removal Procedure - MBP assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 117

Installation Procedure - MBP assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 117

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 117

Replacement of Front fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 118

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 118

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 118

xxviii Table of Contents

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 118

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 118

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 118

Replacement of Bottom fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 119

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 119

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 119

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 119

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 121

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 121

Replacement of Rear Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 122

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 122

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 122

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 122

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 122

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 122

Replacement of Link Arm Cable Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 123

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 123

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 123

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 123

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 123

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 123

Replacement of Caster. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 124

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 124

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 124

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 124

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 126

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 126

Replacement of the COM Express . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 127

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 127

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 127

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 127

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 129

Note on COM Express Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 129

Configuring BIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 129

Note on EEPROM Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 130

Accessing EEPROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 131

Initializing EEPROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 132

Modifying contents of EEPROM (ComExpress VPD) . . . . . . . . . . . 8 - 134

Table of Contents xxix

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 134

Replacement of the HDD/SSD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 135

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 135

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 135

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 135

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 136

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 136

Replacement of Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 137

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 137

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 137

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 137

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 138

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 138

Replacement of 4D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 139

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 139

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 139

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 139

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 140

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 140

Replacement of Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 141

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 141

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 141

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 141

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 141

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 141

Replacement of the Harness Cable and OPIO Cable Assy. . . . . . . . . . . . . . . . . . . 8 - 142

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 142

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 142

Pre-Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 142

Removal Procedure (Harness Cable Assy) . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 142

Removal Procedure (OPIO Cable Assy) . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 144

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 144

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 145

Replacement of Peripheral Cable Assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 146

DVD Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 146

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 146

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 146

xxx Table of Contents

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

Pre work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 146

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 146

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 148

B/W Printer Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 149

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 149

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 149

Pre work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 149

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 149

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 152

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 152

Replacement of the Probe Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 153

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 153

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 153

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 153

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 153

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 153

Replacement of the Cable Hook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 154

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 154

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 154

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 154

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 154

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 154

Replacement of the OPIO Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 155

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 155

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 155

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 155

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 155

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 155

Replacement of the Paper tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 156

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 156

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 156

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 156

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 156

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 156

Replacement of AC Cable Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 157

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 157

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 157

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 157

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 157

Table of Contents xxxi

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 157

Replacement of the BW printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 158

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 158

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 158

Pre work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 158

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 158

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 159

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 159

Replacement of the Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 160

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 160

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 160

Pre work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 160

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 160

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 163

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 163

Replacement of the Monitor Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 164

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 164

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 164

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 164

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 164

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 164

Replacement of Front Fan Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 165

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 165

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 165

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 165

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 165

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 165

Replacement of Bottom Fan Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 166

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 166

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 166

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 166

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 166

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 166

Replacement of SW CD set (R1, R2, R2.5 only) and SW USB (R3 only) . . . . . . . . 8 - 167

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 167

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 167

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 167

xxxii Table of Contents

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 167

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 167

Replacement of Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 168

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 168

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 168

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 168

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 169

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 169

Replacement of ECG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 170

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 170

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 170

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 170

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 171

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 171

Replacement of DCWD ASSY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 172

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 172

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 172

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 172

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 173

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 173

Replacement of MCWD ASSY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 174

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 174

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 174

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 174

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 174

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 174

Replacement of battery pack for LP7-P9 R2 ext battery pack . . . . . . . . . . . . . . . . 8 - 175

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 175

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 175

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 175

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 178

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 178

Replacement of battery pack for LP7-P9 R2 Battery option. . . . . . . . . . . . . . . . . . 8 - 180

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 180

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 180

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 180

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 182

Table of Contents xxxiii

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 183

Replacement of MBOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 184

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 184

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 184

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 184

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 188

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 188

Replacement of MIO-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 189

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 189

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 189

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 189

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 191

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 191

Replacement of BBC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 192

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 192

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 192

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 192

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 197

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 197

Replacement of LOGIQ P9 ROTATION MODULE KIT . . . . . . . . . . . . . . . . . . . . . . 8 - 198

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 198

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 198

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 198

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 203

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 203

Replacement of ODD Dummy Cover R3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 204

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 204

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 204

Pre work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 204

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 204

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 204

Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 204

Replacement of Probe Light assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 205

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 205

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 205

Pre work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 205

Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 205

xxxiv Table of Contents

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

CHAPTER 9

Renewal Parts

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1

Purpose of Chapter 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1

List of Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 2

LOGIQ P9/P7 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 3

Parts List Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 4

Plastics Covers (Front/Sides/Rear) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 6

Plastics Covers (Front/Sides/Rear) (R1 ~ R2.5) . . . . . . . . . . . . . . . . . . . . . 9 - 6

Plastics Covers (Front/Sides/Rear) (R3) . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 8

LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 10

OPIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 12

Nest Box Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 17

Mechanical Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 21

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 24

Optional Peripherals and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 29

Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 29

Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 30

Power Cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 31

Table of Contents xxxv

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

CHAPTER 10

Care & Maintenance

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1

Preventive Maintenance Inspections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1

Purpose of Chapter 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1

Why do Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 2

Quality Assurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 2

Maintenance Task Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 2

How often should care & maintenance tasks be performed? . . . . . . . . . . . . 10 - 2

Tools Required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 5

Special Tools, Supplies and Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 5

Specific Requirements for Care & Maintenance . . . . . . . . . . . . . . . . 10 - 5

System Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 6

Preliminary Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 6

Functional Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 7

System Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 7

Peripheral/Option Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 8

Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 8

Mains Cable Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 8

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 8

General Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 8

Air filter cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 9

Physical Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 10

Optional Diagnostic Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 10

View the logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 10

Probe Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 11

Probe Related Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 11

Basic Probe Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 11

Basic Probe Cleaning and/or Disinfection . . . . . . . . . . . . . . . . . . . . . 10 - 11

System Software Updates(Software Download) (R1, R2, R2.5 only) . . . . . . . . . . . 10 - 12

Software download and installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 13

Using a Phantom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 21

Electrical Safety Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 21

Safety Test Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 21

GEHC Leakage Current Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 22

Outlet Test - Wiring Arrangement - USA & Canada . . . . . . . . . . . . . . . . . . . 10 - 24

xxxvi Table of Contents

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

Grounding Continuity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 25

Meter Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 25

Enclosure Leakage Current Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 26

Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 26

Generic Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 26

Data Sheet for Enclosure Leakage Current . . . . . . . . . . . . . . . . . . . 10 - 27

Earth Leakage Current Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 27

Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 27

Generic Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 28

Type BF Patient Leakage Current Test - Probe . . . . . . . . . . . . . . . . . . . . . 10 - 29

Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 29

Generic Procedure on Leakage Current . . . . . . . . . . . . . . . . . . . . . 10 - 29

Type BF Patient Leakage current - Mains to Probe . . . . . . . . . . . . . . . . . . 10 - 31

When There’s Too Much Leakage Current... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 32

Earth and/or Enclosure Fails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 32

Probe Fails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 32

Peripheral Fails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 32

Still Fails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 32

New Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 33

Ultrasound INSPECTION CERTIFICATE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 35

Table of Contents xxxvii

GE LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 SERVICE MANUAL

xxxviii Table of Contents

GEDRAFT LOGIQ P9/P7

NOTICE

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Chapter 1
Introduction

Section 1-1 Overview

1-1-1 Purpose of Chapter 1

This chapter describes important issues related to safely servicing the LOGIQ P9/P7 ultrasound
system. The service provider must read and understand all the information presented in this manual
before installing or servicing a unit.

Table 1-1 Contents in Chapter 1

Section Description Page Number

1-1

1-2

1-3

1-4

1-5

Overview

Important Conventions

Safety Considerations

Electromagnetic Compatibility (EMC)

Customer Assistance

1-1-2 Purpose of Service Manual

This Service Manual is valid for LOGIQ P9/P7 ultrasound systems.

!! NOTICE:

This Service Manual provides installation and service information for LOGIQ P9/P7 Ultrasound
Scanning System and contains the following chapters:

1) Chapter 1 - Introduction: Contains a content summary and warnings.

2) Chapter 2 - Site Preparation: Contains pre-installation requirements.

3) Chapter 3 - Setup Instructions: Contains setup and installation procedures.

4) Chapter 4 - Functional Checks: Contains functional checks that are recommended as part of the

installation, or as required during servicing and care and maintenance.

5) Chapter 5 - Components and Functions (Theory): Contains block diagrams and functional

explanations of the electronics.

6) Chapter 6 - Service Adjustments: Contains instructions on how to make available adjustments.

7) Chapter 7 - Diagnostics/Troubleshooting: Provides procedures for running diagnostic or related

routines.

8) Chapter 8 - Replacement Procedures: Provides disassembly procedures and reassembly

procedures for all changeable Field Replaceable Units (FRU).

9) Chapter 9 - Renewal Parts: Contains a complete list of field replaceable parts.

10) Chapter 10 - Care & Maintenance: Provides care and maintenance procedures.

1-1

1-3

1-8

1-16

1-17

Chapter 1 - Introduction 1-1

GERAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

1-1-3 Typical Users of the Basic Service Manual

• GE Service Personnel (installation, maintenance, etc.)

• Hospital’s Service Personnel

• Contractors (Some parts of Chapter 2 - Pre-Installation)

1-1-4 Models Covered by this Manual

Table 1-2 LOGIQ P9/P7 - Model Designations

Part Number Description

5560941 LOGIQ P7 Standard

5560939 LOGIQ P7 Tall

5560938 LOGIQ P9

5641296 LOGIQ P7 with High Cabinet

5641037 LOGIQ P9 with Articulating Monitor Arm

5724885 LOGIQ P7 R2 with High Cabinet

5724886 LOGIQ P9 R2 with Articulating Monitor Arm

5759916 LOGIQ P7 R2.5

5759915 LOGIQ P9 R2.5

5794264 LOGIQ P9 R3

5795196 LOGIQ P7 R3

NOTE: For LP9/P7 R3, the color of the system that is shown in this manual could look different from the real

system.

1-2 Section 1-1 - Overview

GEDRAFT LOGIQ P9/P7

DANGER

WARNINGWARNING

CAUTION

NOTICE

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

1-1-5 Purpose of Operator Manual(s)

The Operator Manual(s) should be fully read and understood before operating the LOGIQ P9/P7 and
also kept near the unit for quick reference.

Section 1-2 Important Conventions

1-2-1 Conventions Used in this Manual

Model Designations

This manual covers the LOGIQ P9/P7 ultrasound units listed on page 1-2.

Icons

Pictures, or icons, are used wherever they reinforce the printed message. The icons, labels and
conventions used on the product and in the service information are described in this chapter.

Safety Precaution Messages

Various levels of safety precaution messages may be found on the equipment and in the service
information. The different levels of concern are identified by a flag word that precedes the precautionary
message. Known or potential hazards are labeled in one of following ways:

INDICATES THE PRESENCE OF A HAZARD THAT WILL CAUSE SEVERE

!! DANGER:

!! WARNING:

!! CAUTION:

!! NOTICE:

NOTE: Notes provide important information about an item or a procedure.

PERSONAL INJURY OR DEATH IF THE INSTRUCTIONS ARE IGNORED.

INDICATES THE PRESENCE OF A HAZARD THAT CAN CAUSE SEVERE PERSONAL
INJURY AND PROPERTY DAMAGE IF INSTRUCTIONS ARE IGNORED.

Indicates the presence of a hazard that will or can cause minor personal injury and property
damage if instructions are ignored.

Equipment Damage Possible
Notice is used when a hazard is present that can cause property damage but has absolutely no

personal injury risk.

Example: Disk drive will crash.

Information contained in a NOTE can often save you time or effort.

Chapter 1 - Introduction 1-3

GERAFT LOGIQ P9/P7

LASER

LIGHT

Signed

Date

TAG

&

LOCKOUT

EYE

PROTECTION

or

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

1-2-2 Standard Hazard Icons

Important information will always be preceded by the exclamation point contained within
a triangle, as seen throughout this chapter. In addition to text, several different graphical
icons (symbols) may be used to make you aware of specific types of hazards that could
cause harm. Even if a symbol isn’t used in this manual, it is included for your reference.

Table 1-3 Standard Hazard Icons

ELECTRICAL MECHANICAL RADIATION

LASER HEAT PINCH

Other hazard icons make you aware of specific procedures that should be followed.

Table 1-4 Standard Icons Indicating a Special Procedure be Used

AVOID STATIC ELECTRICITY TAG AND LOCK OUT WEAR EYE PROTECTION

WEAR HAND PROTECTION WEAR FOOT PROTECTION

1-4 Section 1-2 - Important Conventions

GEDRAFT LOGIQ P9/P7

xxxx

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

1-2-3 Product Icons

The following table describes the purpose and location of safety labels and other important information
provided on the equipment.

Table 1-5 Product Icons

LABEL/SYMBOL PURPOSE/MEANING LOCATION

Identification and Rating Plate

Device Listing/Certification Labels

Type/Class Label

IP Code (IPX 1)
IP Code (IPX 7)

Manufacturer's name and address
Model and serial numbers
Electrical ratings

Laboratory logo or labels denoting conformance with industry
safety standards such as UL or IEC.

Council Directive 93/42/EEC concerning medical devices: The
CE mark affixed to the equipment testifies compliance to the
directive.

Used to indicate the degree of safety or protection.

Indicates the degree of protection provided by the enclosure
per IEC 60529.
IPX 1 - protected against dripping water
IPX 7 - protected against the effects of immersion

Equipment Type BF (man in the box, symbol IEC 60878-5333)
indicates B Type equipment having even more electrical
isolation than standard Type B equipment because it is
intended for intimate patient contact.

To identify a defibrillation-proof type CF (heart in box with
“electrodes”, symbol IEC 60878-5336) applied part complying
with IEC 60601-1.

Rear side of the unit
on each probe

Rear side of the unit

Rear side of the unit
on the plug of each probe

Footswitch
Probes

Probe connectors
Main label on rear of system

Front side of the ECG-preamplifier

“CAUTION

This unit weighs...

Special care must be used to avoid..."

"DANGER ­Risk of explosion used in..."

This precaution is intended to prevent injury that may result if
one person attempt to move the unit considerable distances or
on an incline due to the weight of the unit.

The system is not designed for use with flammable anesthetic
gases.

"CAUTION" The equilateral triangle is usually used in
combination with other symbols to advise or warn the user.

ATTENTION - Consult accompanying documents " is
intended to alert the user to refer to the operator manual or
other instructions when complete information cannot be
provided on the label.

Chapter 1 - Introduction 1-5

Used in the Service and User Manual
which should be adjacent to equipment
at all times for quick reference.

Indicated in the Service Manual.

various

Rear side of Power Supply

GERAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Table 1-5 Product Icons (Continued)

LABEL/SYMBOL PURPOSE/MEANING LOCATION

"CAUTION - Dangerous voltage" (the lightning flash with
arrowhead in equilateral triangle) is used to indicate electric
shock hazards.

various

"Mains OFF" Indicates the power off position of the mains
power switch.

"OFF/Standby" Indicates the power off/standby position of the
power switch.

CAUTION
This Power Switch DOES NOT ISOLATE Mains Supply

"Mains ON" Indicates the power on position of the mains
power switch.

"Protective Earth" Indicates the protective earth (grounding)
terminal.

"Equipotentiality" Indicates the terminal to be used for
connecting equipotential conductors when interconnecting
(grounding) with other equipment.

Waste Electrical and Electronic Equipment (WEEE) Disposal.
This symbol indicates that waste electrical and electronic
equipment must not be disposed as unsorted municipal waste
and must be collected separately. Please contact an
authorized representative of the manufacturer for information
concerning the decommissioning of your equipment.

rear of system at mains switch

Adjacent to On-Off/Standby switch left
below the Control panel.

rear of system at mains switch

rear of system at mains switch
(on primary power supply - RTN)

rear of system at mains switch
(on primary power supply - RTN)

Rear side of the unit
on the plug of each probe

These symbols indicate that at least one of the six hazardous
substances of the China RoHS Labelling Standard is above
the RoHS limitation.
The number inside the circle is referred to as the
Environmental Friendly Use Period (EFUP). It indicates the
number of years that the product, under normal use, will
remain harmless to health of humans or the environment.

EFUP = 10 for Short Use Products
EFUP = 20 for Medium Use Products

This product consists of devices that may contain mercury,
which must be recycled or disposed of in accordance with
local, state, or country laws.
(Within this system, the backlight lamps in the monitor and the
Touch Panel display, contain mercury.)

Loading prohibited at top cover of the system

1-6 Section 1-2 - Important Conventions

Rear side of the unit
on the plug of each probe

Rear side of the unit
not visible:

- below the cover on read side of Monitor

- on rear side of the Touch Panel

GEDRAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Table 1-5 Product Icons (Continued)

LABEL/SYMBOL PURPOSE/MEANING LOCATION

Every system has a unique marking for identification, the
Unique Device Identification (UDI) Label. The UDI label
consists of a series of alpha-numeric characters and barcode,
which uniquely identify the LOGIQ P9/P7 system as a medical
device manufactured by General Electric. Scan or enter the
UDI information into the patient health record as required by
country-specific laws.

Rating Plate

Upgraded LOGIQ P9 systems, adjacent
to the Rating Plate

Chapter 1 - Introduction 1-7

GERAFT LOGIQ P9/P7

CAUTION

WARNINGWARNING

WARNINGWARNING

WARNINGWARNING

CAUTION

CAUTION

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Section 1-3 Safety Considerations

1-3-1 Introduction

The following safety precautions must be observed during all phases of operation, service and repair of
this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this
manual, violates safety standards of design, manufacture and intended use of the equipment.

1-3-2 Human Safety

Operating personnel must not remove the system covers, except for removing front cover to clean air
filter.
Servicing should be performed by authorized personnel only. Only personnel who have participated in
a LOGIQ P9/P7 Training are authorized to service the equipment.

1-3-3 Mechanical Safety

The LOGIQ P9/P7 weighs 60 kg or more, depending on installed peripherals, (133 lbs or more)

!! CAUTION:

when ready for use.
Care must be used when moving it or replacing its parts. Failure to follow the precautions

listed could result in injury, uncontrolled motion and costly damage.
ALWAYS:

• Use the handle to move the system. • Be sure the pathway is clear.

• Use slow, careful motions. • Do not let the system strike walls or door frames.
Two people are required when moving on inclines or lifting more than 16 kg (35 lbs).

USE EXTREME CAUTION WHEN ELEVATING THE UNIT, OR IF IT IS RAISED FOR A

!! WARNING:

REPAIR OR MOVED ALONG ANY INCLINE. THE LOGIQ P9/P7 SYSTEM MAY
BECOME UNSTABLE WHICH COULD CAUSE A TIP OVER.

ULTRASOUND PROBES ARE HIGHLY SENSITIVE MEDICAL INSTRUMENTS THAT

!! WARNING:

CAN EASILY BE DAMAGED BY IMPROPER HANDLING. USE CARE WHEN
HANDLING AND PROTECT FROM DAMAGE WHEN NOT IN USE. DO NOT USE A
DAMAGED OR DEFECTIVE PROBE. FAILURE TO FOLLOW THESE PRECAUTIONS
CAN RESULT IN SERIOUS INJURY AND EQUIPMENT DAMAGE.

NEVER USE A PROBE THAT HAS FALLEN TO THE FLOOR.

!! WARNING:

!! CAUTION:

!! CAUTION:

NOTE: Special care should be taken when transporting the unit in a vehicle:

1-8 Section 1-3 - Safety Considerations

EVEN IF IT LOOKS OK, IT MAY BE DAMAGED.

Always lower and center the Operator I/O Panel before moving the scanner.

Before you move or transport the system, make sure to lock the LCD monitor firmly and flip
down the monitor to prevent damage to the system.

• Eject any DVD/CD from the drive.

• Place the probes in their carrying cases.

• DO NOT use the Control Panel as an anchor point.

• Secure the systems with straps in an upright position and lock the caster wheels (brake).

• Ensure that the LOGIQ P9/P7 system is firmly secured while inside the vehicle.

• Prevent vibration damage by driving cautiously. Avoid unpaved roads, excessive speeds, and

erratic stops or starts.

GEDRAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

1-3-4 Electrical Safety

1-3-4-1 Safe Practices

To minimize shock hazard, the equipment chassis must be connected to an electrical ground.
The system is equipped with a three-conductor AC power cable. This must be plugged into an approved
electrical outlet with safety ground. If an extension cord is used with the system, make sure that the total
current rating of the system does not exceed the extension cord rating.

The power outlet used for this equipment should not be shared with other types of equipment.
Both the system power cable and the power connector meet international electrical standards.

This product is classified as Class I and INTERNALLY POWERED ME EQUIPMENT according to the
IEC/EN 60601-1.

1-3-4-2 Probes

All the probes for the LOGIQ P9/P7 are designed and manufactured to provide trouble-free, reliable
service. To ensure this, correct handling of probes is important and the following points should be noted:

• Do not drop a probe or strike it against a hard surface, as this may damage the transducer elements,
acoustic lens, or housing.

• Inspect the probe prior to each use for damage or degradation to the Housing, Cable strain relief,
Lens and Seal.

• Do not use a cracked or damaged probe. In this event, call your field service representative
immediately to obtain a replacement.

• Avoid pulling, pinching or kinking the probe cable, since a damaged cable may compromise the
electrical safety of the probe.

• To avoid the risk of a probe accidentally falling, do not allow the probe cables to become entangled,
or to be caught in the machine’s wheels.

• Never immerse the probe connector or adapter into any liquid.

NOTE: For detailed information on handling probes, refer to the LOGIQ P9/P7 Basic User Manual and the care

card supplied with the probe.

Chapter 1 - Introduction 1-9

GERAFT LOGIQ P9/P7

WARNINGWARNING

WARNINGWARNING

NOTICE

CAUTION

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

1-3-5 Auxiliary Devices Safety

Power Supplies for additional equipment MUST comply with IEC 60601-1.

!! WARNING:

DO NOT attempt to use different peripherals and accessories (brand and model;

!! WARNING:

connected via USB ports) other than approved and provided by GE Healthcare!
The ultrasound system is an extremely sensitive and complex medical system.
Any unauthorized peripherals may cause system failure or damage!

The LOGIQ P9/P7 may be used with an isolation transformer to provide the required separation from
mains for both, the system and the auxiliary devices.
One AUX main outlet is located at the primary power supply. It is used for connecting the two-fold splitter
whose outlets are led to the shelves intend for auxiliary devices (e.g., printers) and the AUX main outlet
that is accessible on the back of the control console.

The IEC 60601-1-1 standard provides a guideline for safely interconnecting medical devices in systems.
“Equipment connected to the analog or digital interface must comply with the respective IEC/UL
standards (e.g. IEC 60950 / UL 60950 for data processing equipment and IEC 60601-1 / ANSI/AAMI
ES60601-1 for medical equipment).

Everybody who connects additional equipment to the signal input portion or signal output portion
configures a medical system, and is therefore responsible that the system complies with the
requirements of the system standard IEC 60601-1-1.

!! NOTICE:

!! CAUTION:

Special care has to be taken, if the device is connected to computer network (e.g., Ethernet), because
other devices could be connected without any control. There could be a potential difference between
the protective earth and any line of the computer network including the shield.

In this case the only way to operate the system safely is to use an isolated signal link with minimum
4mm creepage distance, 2.5mm air clearance of the isolation device. For computer networks there are
media converters available which convert the electrical to optical signals. Please consider that this
converter has to comply with IEC xxx standards* and is battery operated or connected to the isolation
mains output of the LOGIQ P9/P7 ultrasound system.

* IEC xxx stands for standards such as:

• IEC 60601 for medical devices

• IEC 60950 for information technology equipment etc.

The system integrator (any person connecting the medical device to other devices) is responsible
that the connections are safe.

If in doubt, consult the technical service department or your local representative.

The leakage current of the entire system including any / all auxiliary equipment must not exceed
the limit values as per IEC 60601-1 / EN 60601-1 respectively other valid national or international
standards. All equipment must comply with UL, CSA and IEC requirements.

1-10 Section 1-3 - Safety Considerations

GEDRAFT LOGIQ P9/P7

CAUTION

CAUTION

CAUTION

WARNINGWARNING

NOTICE

2,5 m

1,5 m

1,5 m1,5 m

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Please observe that some printers may not be medical devices! If the Bluetooth Printer and/or

!! CAUTION:

Line Printers are no medical devices, they have to be located outside of the patient environment
(according to IEC 60601-1 / ANSI/AAMI ES60601-1).

Auxiliary equipment must only be connected to the main console with the special main outlet

!! CAUTION:

provided for the electrical safety of the system.

Auxiliary equipment with direct main connection requires galvanic separation of the signal and/

!! CAUTION:

or control leads.

For hardware installation procedures see: Chapter 3 - Connection of Auxiliary Devices, on page 3-11.

After each installation, the leakage currents have to be measured according to

!! WARNING:

IEC 60601-1 respectively ANSI/AAMI ES60601-1.

!! NOTICE:

All peripherals mounted on the LOGIQ P9/P7 system chassis must be firmly secured in position.

Chapter 1 - Introduction 1-11

GERAFT LOGIQ P9/P7

CAUTION

WARNINGWARNING

CAUTION

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

1-3-6 Battery Safety

NOTE: The LOGIQ P9/P7 ultrasound system is supplied with a lithium ion battery in the power supply

module, as option.

The lithium ion technology used in the system’s battery is significantly less hazardous to the
environment than the lithium metal technology used in some other batteries (such as watch batteries).
Used batteries should not be placed with common household waste products. Contact local authorities
for the location of a chemical waste collection program nearest you.

NOTE: Regulations vary for different countries. Dispose of a used battery in accordance with local

regulations.

USE ONLY BATTERIES APPROVED BY GE HEALTHCARE AS SUITABLE FOR USE WITH THE
LOGIQ P9/P7 ULTRASOUND SYSTEM.

THE LOGIQ P9/P7 BATTERY HAS A SAFETY DEVICE.
DO NOT ATTEMPT TO DIS-ASSEMBLE OR ALTER THE BATTERY!

ALWAYS OBSERVE THE FOLLOWING PRECAUTIONS:

• DO NOT short-circuit the battery by directly connecting the negative terminals with metal objects.

• DO NOT heat the battery or discard it in a fire.

• DO NOT expose the battery to temperatures over 50 C. Keep the battery away from fire and other
heat sources.

• DO NOT charge the battery near a heat source, such as, a fire or heater.

• DO NOT leave the battery in direct sunlight.

• DO NOT pierce the battery with a sharp object, hit it, or step on it.

• DO NOT use a damaged battery.

• DO NOT apply solder to a battery.

• DO NOT connect the battery to an electrical power outlet.

TO PREVENT THE BATTERY BURSTING, IGNITING, OR FUMES FROM THE BATTERY CAUSING
EQUIPMENT DAMAGE, ALWAYS OBSERVE THE FOLLOWING PRECAUTIONS:

• DO NOT immerse the battery in water or allow it to get wet.

• DO NOT place the battery into a microwave oven or pressurized container.

• If the battery leaks or emits an odor, remove it from all possible flammable sources.

• If the battery emits an odor or heat, is deformed or discolored, or in a way appears abnormal during
use, recharging or storage, immediately remove it and stop using it.

NOTE: If you have any questions about the battery, consult your local GE representative.

• Storage of the battery pack:
Short-term (less than 1 month): between 0 C (32 °F) and 50 C(122 °F)

Long-term (more than 3 months): between 10 C (50 °F) and 35C (95 °F)

When charging the battery for the first time after long-term storage, recover the battery pack to
original performance through repeating several cycles of full charging and discharging.

1-12 Section 1-3 - Safety Considerations

GEDRAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

1-3-7 Labels Locations

The LOGIQ P9/P7 ultrasound system comes equipped with product labels and icons.
These labels and icons represent pertinent information regarding the operation of the unit.

Figure 1-1 Label Location (R1, R2 and R2.5)

* Required for Asia.

1) LCD Caution Label

2) Gender Caution Label (Only for India, China, Korea)

3) Multi Caution Label

4) LOGIQ P9/P7 Rating Label (For China, Korea, Japan)

5) LOGIQ P9/P7 Rating Label

6) UL Label

Chapter 1 - Introduction 1-13

GERAFT LOGIQ P9/P7

*

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Figure 1-2 Label Location (R3)

* Required for Asia.

1) LCD Caution Label

2) Gender Caution Label (Only for India, China, Korea)

3) Multi Caution Label

4) LOGIQ P9/P7 Rating Label (For China, Korea, Japan)

5) LOGIQ P9/P7 Rating Label

1-14 Section 1-3 - Safety Considerations

GEDRAFT LOGIQ P9/P7

DANGER

WARNINGWARNING

WARNINGWARNING

NOTICE

Signed

Date

TAG

&

LOCKOUT

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

1-3-8 Dangerous Procedure Warnings

Warnings, such as the examples below, precede potentially dangerous procedures throughout this
manual. Instructions contained in the warnings must be followed.

DANGEROUS VOLTAGES, CAPABLE OF CAUSING DEATH, ARE PRESENT

!! DANGER:

IN THIS EQUIPMENT.
USE EXTREME CAUTION WHEN HANDLING, TESTING AND ADJUSTING.

EXPLOSION WARNING

!! WARNING:

!! WARNING:

DO NOT OPERATE THE EQUIPMENT IN AN EXPLOSIVE ATMOSPHERE.
OPERATION OF ANY ELECTRICAL EQUIPMENT IN SUCH AN ENVIRONMENT
CONSTITUTES A DEFINITE SAFETY HAZARD.

DO NOT SUBSTITUTE PARTS OR MODIFY EQUIPMENT
BECAUSE OF THE DANGER OF INTRODUCING ADDITIONAL HAZARDS, DO NOT

INSTALL SUBSTITUTE PARTS OR PERFORM ANY UNAUTHORIZED MODIFICATION
OF THE EQUIPMENT.

1-3-9 Lockout/Tagout Requirements (For USA Only)

Follow OSHA Lockout/Tagout requirements to protect service personnel from injuries caused by
unexpected energizing or start-up of equipment during service, repair, or maintenance.

Energy Control and Power Lockout for LOGIQ P9/P7.

!! NOTICE:

When servicing parts of the system where there is exposure to voltage greater than 30 Volts:
Unplug the system.
Maintain control of the system power plug.
There are no test points to verify isolation, you must wait for at least 20 seconds for capacitors to
discharge.

Beware that the Power Supply, Front End Processor and Back End Processor may be energized even
if the power is turned off when the cord is still plugged into the AC Outlet.

1-3-10 Returning/Shipping System, Probes and Repair Parts

When returning or shipping the LOGIQ P9/P7 system in the original packaging:

• system must be lowered to its minimum height with monitor flapped down (see Figure on page 3-8)

• the Control Console has to be centered and locked in “unextended” position.
Equipment being returned must be clean and free of blood and other infectious substances.

GEHC policy states that body fluids must be properly removed from any part or equipment prior to
shipment. GEHC employees, as well as customers, are responsible for ensuring that parts/equipment
have been properly decontaminated prior to shipment. Under no circumstance should a part or
equipment with visible body fluids be taken or shipped from a clinic or site (for example, body coils or
and ultrasound probe).

UT

The purpose of the regulation is to protect employees in the transportation industry, as well as the
people who will receive or open this package.

Chapter 1 - Introduction 1-15

GERAFT LOGIQ P9/P7

WARNINGWARNING

WARNINGWARNING

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

1-3-10 Returning/Shipping System, Probes and Repair Parts (cont?)

NOTE: The US Department of Transportation (DOT) has ruled that “items what were saturated and/or dripping

with human blood that are now caked with dried blood; or which were used or intended for use in patient
care” are “regulated medical waste” for transportation purpose and must be transported as a hazardous
material.

Section 1-4 Electromagnetic Compatibility (EMC)

1-4-1 What is EMC?

Electromagnetic compatibility describes a level of performance of a device within its electromagnetic
environment. This environment consists of the device itself and its surroundings including other
equipment, power sources and persons with which the device must interface. Inadequate compatibility
results when a susceptible device fails to perform as intended due interference from its environment or
when the device produces unacceptable levels of emission to its environment. This interference is often
referred to as radio–frequency or electromagnetic interference (RFI/EMI) and can be radiated through
space or conducted over interconnecting power of signal cables. In addition to electromagnetic energy,
EMC also includes possible effects from electrical fields, magnetic fields, electrostatic discharge and
disturbances in the electrical power supply.

For applicable standards please refer to Chapter 2 in the Basic User Manual of the LOGIQ P9/P7
ultrasound system.

1-4-2 Compliance

The LOGIQ P9/P7 unit conforms to all applicable conducted and radiated emission limits and to
immunity from electrostatic discharge, radiated and conducted RF fields, magnetic fields and power line
transient requirements as mentioned in IEC 60601-1-2.

NOTE: For CE Compliance, it is critical that all covers, screws, shielding, gaskets, mesh, clamps, are in

good condition, installed tightly without skew or stress. Proper installation following all
comments noted in this service manual is required in order to achieve full EMC performance.

1-4-3 Electrostatic Discharge (ESD) Prevention

DO NOT touch any boards with integrated circuits prior to taking the necessary ESD

!! WARNING:

!! WARNING:

precautions:

1.) When installing boards, ESD may cause damage to a board.

ALWAYS connect yourself, via an arm-wrist strap, to the advised ESD connection
point located on the rear of the system (to the right of the power connector).

2.) Follow general guidelines for handling of electrostatic sensitive equipment.

Risk of electrical shock: System must be turned off.
Avoid all contact with electrical contacts, conductors and components.
Always use non-conductive handles designed for the removal and replacement of ESD
sensitive parts. All parts that have the potential for storing energy must be discharged
or isolated before making contact.

1-16 Section 1-4 - Electromagnetic Compatibility (EMC)

GEDRAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Section 1-5 Customer Assistance

1-5-1 Contact Information

If this equipment does not work as indicated in this service manual or in the Basic User Manual, or if
you require additional assistance, please contact the local distributor or appropriate support resource,
as listed below.

NOTE: Prepare vital system information (see: Section 7-2 on page 7-2) before you call:

•System Type

• System Serial number (also visible on label on back of the system)

• Application Software version

• Backup version

• additional information about installed software

Table 1-6 Phone Numbers for Customer Assistance

Location Phone Number

USA
GE Healthcare
Ultrasound Service Engineering
9900 Innovation Drive (RP-2123)
Wauwatosa, WI 53226, USA

Canada 1-800-668-0732

Latin America

Europe
GE Ultraschall Deutschland GmbH
Beethovenstraße 239
Postfach 11 05 60, D-42655 Solingen
Germany

Online Services Ultrasound Asia

Australia
China
India
Japan
Korea
Singapore

1-5-2 System Manufacturer

Service On-site
Service: Parts

Applications support

Service
Applications support

OLC - EMEA (Europe, Middle East & Africa)
Phone: [phone] - 652 (-OLC)

[phone] (English/German all segments incl. training)

Fax: [phone] - 431

Phone: +(61) 1-800-647-855

+(86) 800-810-8188
+(91) 1-800-11-4567
+(81) 42-648-2924
+(82) 2-6201-3585
+(95) 6277-3444

1-800–437–1171
1-800-558-2040

1-800-682-5327 or 1-262-524-5698

1-800-321-7937
1-262-524-5698

Table 1-7 System Manufacturer

Manufacturer FAX Number

GE Ultrasound Korea, Ltd.
9, Sunhwan-ro 214beon-gil, Jungwon-gu,

Seongnam-si, Gyeonggi-do,
Korea

Chapter 1 - Introduction 1-17

[phone]

GERAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

1-18 Section 1-5 - Customer Assistance

GEDRAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Chapter 2
Site Preparation

Section 2-1 Overview

2-1-1 Purpose of Chapter 2

This chapter provides the information required to plan and prepare for the installation of a LOGIQ P9/
P7 ultrasound unit. Included are descriptions of the facility and electrical needs to be met by the
purchaser.

Table 2-1 Contents in Chapter 2

Section Description Page Number

2-1

2-2

2-3

Overview

General Console Requirements

Facility Needs

2-1

2-2

2-7

Chapter 2 - Site Preparation 2-1

GERAFT LOGIQ P9/P7

CAUTION

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Section 2-2 General Console Requirements

2-2-1 Environmental Requirements

Table 2-2 System Environmental Requirements

Operational

(with probe)

o

10 - 35

Temperature

18- 30

Humidity

Pressure 700 - 1060hPa 700 - 1060hPa 700 - 1060hPa

C (50 - 95 oF)

with 2D probe

o

C (64.4 - 86oF)

with 4D probe

10 - 80%

(non-condensing)

Storage

(LOGIQ P9/P7)

o

-10 - 50

(14 - 122

(non-condensing)

10 - 90%

C

o

F)

If the system has been in storage or has been transported, please see the acclimation requirements

!! CAUTION:

before powering

ON and/or using the system (see: Section 3-2-2 "Installation Warnings" on page 3-3).

2-2-1-1 Cooling

The cooling requirement for the LOGIQ P9/P7 is 680 BTU/hr. This figure does not include cooling
needed for lights, people, or other equipment in the room.

NOTE: Each person in the room places an additional 300 BTU/hr. demand on the cooling system.

2-2-1-2 Lighting

Bright light is needed for system installation, updates and repairs. However, operator and patient
comfort may be optimized if the room light is subdued and indirect. Therefore a combination lighting
system (dim/bright) is recommended. Keep in mind that lighting controls and dimmers can be a source
of EMI which could degrade image quality. These controls should be selected to minimize possible
interference.

Transport

(LOGIQ P9/P7)

o

10 - 90%

C

o

F)

-10 - 50

(14 - 122

(non-condensing)

2-2-2 Electrical Requirements

NOTE: GE Healthcare requires a dedicated power and ground for the proper operation of its Ultrasound

equipment. This dedicated power shall originate at the last distribution panel before the system.

The dedicated line shall consist of one phase, a neutral (not shared with any other circuit), and a full
size Ground wire from the distribution panel to the Ultrasound outlet.

NOTE: Please note that image artifacts can occur, if at any time within the facility, the Ground from the main

facility's incoming power source to the Ultrasound unit is only a conduit.

2-2 Section 2-2 - General Console Requirements

GEDRAFT LOGIQ P9/P7

CAUTION

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

2-2-2-1 LOGIQ P9/P7 Power Requirements

Table 2-3 Electrical Specifications for LOGIQ P9/P7

Voltage Tolerances Current Frequency

100 - 120 VAC ±10% 5.0 ... 4.1 A 50, 60 Hz (±2%)

220 - 240 VAC ±10% 2.2 ... 2.0 A 50, 60 Hz (±2%)

Power Consumption nominal 500 VA including all on-board peripherals.

2-2-2-2 Inrush Current

Inrush current is not a factor to consider due to the inrush current limiting properties of the power
supplies.

2-2-2-3 Site Circuit Breaker

It is recommended that the branch circuit breaker for the machine be readily accessible.

POWER OUTAGE MAY OCCUR.

!! CAUTION:

The LOGIQ P9/P7 requires a dedicated single branch circuit. To avoid circuit overload and
possible loss of critical care equipment, make sure you DO NOT have any other equipment
operating on the same circuit.

2-2-2-4 Site Power Outlets

A dedicated AC power outlet must be within reach of the unit without extension cords. Other adequate
outlets for the external peripherals, medical and test equipment needed to support this unit must also
be present within 1 m (3.2 ft.) of the unit. Electrical installation must meet all current local, state, and
national electrical codes.

2-2-2-5 Main Power Plug

The LOGIQ P9/P7 ultrasound system is supplied with a main power plug, as standard. In the event that
the unit arrives without a power plug, or with the wrong plug, contact your GE dealer. When necessary,
the installation engineer will supply the appropriate power plug to meet the applicable local regulations.

Chapter 2 - Site Preparation 2-3

GERAFT LOGIQ P9/P7

NOTICE

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

2-2-3 EMI Limitations

Ultrasound systems are susceptible to Electromagnetic Interference (EMI) from radio frequencies,
magnetic fields, and transients in the air or wiring. Ultrasound machines also generate EMI.
The LOGIQ P9/P7 complies with limits as stated on the EMC label. However, there is no guarantee that
interference will not occur in a particular installation.

Possible EMI sources should be identified before the unit is installed.

!! NOTICE:

Electrical and electronic equipment may produce EMI unintentionally as the result of a defect.
Sources of EMI include the following:

• medical lasers

• scanners

• cauterizing guns

•computers

•monitors

• fans

• gel warmers

• microwave oven

• light dimmers

• portable phones

• broadcast stations and mobile broadcasting machines

Table 2-4 EMI Prevention/Abatement

EMI Rule Details

Keep the unit at least 5 meters (16.4 feet) away from other EMI sources. Special shielding may be

Be aware of RF sources.

Ground the unit.

Replace and/or reassemble
all screws, RF gaskets,
covers and cores.

Replace broken RF gaskets.

Do not place labels where
RF gaskets touch metal.

Use GE- specified
harnesses and peripherals.

Take care with cellular
phones.

Properly dress peripheral
cables.

required to eliminate interference problems caused by high frequency, high powered radio or video
broadcast signals.

Poor grounding is the most likely reason a unit will have noisy images.
Check grounding of the power cord and power outlet.

After you finish repairing or updating the system, replace all covers and tighten all screws.
Any cable with an external connection requires a magnet wrap at each end.
Install the shield over the front of card cage. Loose or missing covers or RF gaskets allow radio
frequencies to interfere with the ultrasound signals.

If more than 20% or a pair of the fingers on an RF gasket are broken, replace the gasket.
Do not turn ON the unit until any loose metallic part is removed and replaced, if required.

Never place a label where RF gaskets meet the unit. Otherwise, the gap created will permit RF
leakage. In case a label has been found in such a location, move the label to a different,
appropriate location.

The interconnect cables are grounded and require ferrite beads and other shielding.
Cable length, material, and routing are all important; do not make any changes that do not meet
all specifications.

Cellular phones may transmit a 5 V/m signal that causes image artifacts.

Do not allow cables to lie across the top of the card cage or hang out of the peripheral bays.
Loop the excess length for peripheral cables inside the peripheral bays.
Attach the monitor cables to the frame.

2-4 Section 2-2 - General Console Requirements

GEDRAFT LOGIQ P9/P7

NOTICE

CAUTION

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

2-2-4 Probe Environmental Requirements

Table 2-5 2D Probe Environmental Requirements

Operational

o

10

- 35 oC

for 2D probe

!! NOTICE:

Temperature

10 - 80% (non-condensing) for 2D probe

Humidity

30 - 80% (non-condensing) for 4D probe

Pressure 700 - 1060hPa

SYSTEMS AND ELECTRONIC PROBES ARE DESIGNED FOR STORAGE TEMPERATURES OF
0 TO + 55 degrees C. WHEN EXPOSED TO LARGE TEMPERATURE VARIATIONS, THE
PRODUCT SHOULD BE KEPT IN ROOM TEMPERATURE FOR 10 HOURS BEFORE USE.

o

18

- 30oC

for 4D probe

2-2-5 Time and Manpower Requirements

Site preparation takes time. Begin Pre-installation checks as soon as possible. If possible, allow six
weeks before delivery, for enough time to make necessary changes.

Have two people available to deliver and unpack the LOGIQ P9/P7 ultrasound system.

!! CAUTION:

Attempts to move the unit considerable distances (or on an incline) by one person alone, could
result in personal injury and/or damage to the system.

Chapter 2 - Site Preparation 2-5

GERAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

2-2-6 System Specifications

2-2-6-1 Physical Dimensions of LOGIQ P9/P7

The physical dimensions and weight (without Peripherals) of the LOGIQ P9/P7 unit are summarized in

Ta bl e 2 -6 .

NOTE: Physical dimensions (especially height and depth) depend on control console and monitor positioning.

For more details refer to Chapter 5 - OPIO Positioning, on page 5-20.

Table 2-6 Physical Dimensions and Weight (without Peripherals)

Height Width Depth Weight

1570 mm (max)

1375 mm (min) *

* with low cabinet option

2-2-6-2 Acoustic Noise Output

max. 50 dB(A)

2-2-6-3 Electrical Specifications

Please refer to Section 2-2-2-1 "LOGIQ P9/P7 Power Requirements" on page 2-3.

530 mm (console)

430 mm (Operator Panel)

740 mm 60 kg

2-6 Section 2-2 - General Console Requirements

GEDRAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Section 2-3 Facility Needs

2-3-1 Purchaser Responsibilities

The work and materials needed to prepare the site is the responsibility of the purchaser. Delay,
confusion, and waste of manpower can be avoided by completing pre installation work before delivery.

Use the Pre-installation checklist (provided in Table 2-7) to verify that all needed steps have been taken.

Table 2-7 LOGIQ P9/P7 Pre-Installation Check List

Action Yes No

Schedule at least 3 hours for installation of the system.

Notify installation team of the existence of any variances from the basic installation.

Make sure system and probes have been subject to acclimation period.

Environmental cooling is sufficient.

Lighting is adjustable to adapt to varying operational conditions of the scanner.

Electrical facilities meet system requirements.

EMI precautions have been taken and all possible sources of interference have been removed.

Mandatory site requirements have been met.

If a network is used, IP address has been set for the system and a dedicated network outlet is available.

Purchaser responsibility includes:

• Procuring the materials required.

• Completing the preparations before delivery of the ultrasound system.

• Paying the costs for any alterations and modifications not specifically provided in the sales contract.

NOTE: All electrical installations that are preliminary to the positioning of the equipment at the site prepared for

the equipment must be performed by licensed electrical contractors. Other connections between pieces
of electrical equipment, calibrations, and testing must also be performed by qualified personnel.
The products involved (and the accompanying electrical installations) are highly sophisticated and
special engineering competence is required. All electrical work on these products must comply with the
requirements of applicable electrical codes. The purchaser of GE equipment must only utilize qualified
personnel to perform electrical servicing on the equipment.

The desire to use a non–listed or customer provided product or to place an approved product further
from the system than the interface kit allows presents challenges to the installation team. To avoid
delays during installation, such variances should be made known to the individuals or group performing
the installation at the earliest possible date (preferably prior to the purchase).

The ultrasound suite must be clean prior to delivery of the machine. Carpet is not recommended
because it collects dust and creates static. Potential sources of EMI (electromagnetic interference)
should also be investigated before delivery. Dirt, static, and EMI can negatively impact system reliability.

Chapter 2 - Site Preparation 2-7

GERAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

2-3-2 Mandatory Site Requirements

The following are mandatory site requirements. Additional (optional) recommendations, as well as a
recommended ultrasound room layout, are provided in Section 2-3-3 "Site Recommendations" .

• A dedicated single branch power outlet of adequate amperage (see Table 2-3 on page 2-3) that
meets all local and national codes and is located less than 2.5 m (8.2 ft) from the unit’s proposed
location. Refer to: Section 2-2-2 "Electrical Requirements" on page 2-2.

• A door opening of at least 76 cm (2.5 ft) in width.

• The proposed location for the unit is at least 0.2 m (0.67 ft) from the walls, to enable cooling.

• Clean and protected space for storage of probes (either in their case or on a rack).

• Material to safely clean probes (performed using a plastic container, never metal).

• Power outlet and place for any external peripheral are within 2 m (6.5 ft.) of each other with
peripheral within 1 m of the unit to connect cables.

NOTE: The LOGIQ P9/P7 has one outlet for on board peripherals.

In case of network option:

• An active network outlet in the vicinity of the ultrasound unit.

• A network cable of appropriate length (regular Pin-to-Pin network cable).

• An IT administrator who will assist in configuring the unit to work with your local network.
A fixed IP address is required. Refer to the form provided in Figure 3-46 on page 3-71 for network
details that are required.

NOTE: All relevant preliminary network port installations at the prepared site must be performed by authorized

contractors. The purchaser of GE equipment must utilize only qualified personnel to perform servicing
of the equipment.

2-3-3 Site Recommendations

The following are (optional) site recommendations. Mandatory site requirements are provided in the

Mandatory Site Requirements section, above.

• Door opening of 90 cm (3 ft) in width.

• Accessible circuit breaker for a dedicated power outlet.

• Sink with hot and cold running water.

• Receptacle for bio–hazardous waste, for example, used probe sheaths.

• Emergency oxygen supply.

• Storage area for linens and equipment.

• Nearby waiting room, lavatory, and dressing room.

• Dual level lighting (bright and dim).

• Lockable cabinet for software and manuals.

2-8 Section 2-3 - Facility Needs

GEDRAFT LOGIQ P9/P7

35.5 IN.

(92 CM)

Dedicated Power Outlets

Hospital Network

Cabinet for
Software and Manuals
(optional)

LOGIQ P9/P7

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

2-3-3-1 Recommended Ultrasound Room Layout

Figure 2-1 below shows a floor plan illustrating the recommended layout of the Ultrasound Room and

depicting the minimal room layout requirements.

Figure 2-1 Recommended Floor Plan 4.3m x 5.2m (14ft x 17ft)

Chapter 2 - Site Preparation 2-9

GERAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

2-3-4 Networking Setup Requirements

2-3-4-1 Stand-alone Unit (without Network Connection)

None

2-3-4-2 Unit Connected to Hospital’s Network

Supported networks:

• Ethernet network connection

• Up to 900 Mbps WLAN (optional)

2-3-4-3 Purpose of the DICOM Network Function

DICOM (Digital Imaging and Communications in Medicine) services provide the operator with clinically
useful features for moving images and patient information over a hospital network.
Examples of DICOM services include the transfer of images to workstations for viewing or transferring
images to remote printers. As an added benefit, transferring images in this manner frees up the on­board monitor and peripherals, enabling viewing to be done while scanning continues.
With DICOM, images can be archived, stored, and retrieved faster, easier, and at a lower cost.

2-3-4-4 DICOM Option Pre-installation Requirements

To configure the LOGIQ P9/P7 ultrasound unit to work with other network connections, the network
administrator must provide some necessary information.

Use the Agent Configuration (R3 only) on page 3-65 to record required information that must include:

• LOGIQ P9/P7
Details:

• Routing Information: IP addresses for default gateway and other routers in use at site.

• DICOM Application Information: Details of DICOM devices in use at the site, including the DICOM

Installation see: Section 3-13 "Configuring Connectivity" on page 3-58.

DICOM network details for the LOGIQ P9/P7 unit, including the
host name, local port, IP address, AE title and net mask.

host name, AE title, DICOM port number and IP addresses.

2-10 Section 2-3 - Facility Needs

GEDRAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Chapter 3
Setup Instructions

Section 3-1 Overview

3-1-1 The Purpose of Chapter 3

This chapter contains information needed to setup the LOGIQ P9/P7 ultrasound system. Included are
procedures to receive, unpack and configure the equipment.
A worksheet is provided (see: page 3-65 to page 3-71) to help ensure that all the required information
is available, prior to setup the system.

Table 3-1 Contents in Chapter 3

Section Description Page Number

3-1

3-2

3-3

3-4

3-5

3-6

3-7

3-8

3-9

3-10

3-11

3-12

3-13

3-14

3-15

3-16

Overview

Set Up Reminders

Receiving and Unpacking the Equipment

Packing materials - recycling information

Preparing for Set Up

Connection of Auxiliary Devices

Completing the Set Up

Printer Installation

System Configuration

Available Probes

Software/Option Configuration

Connectivity Setup

Configuring Connectivity

Agent Configuration (R3 only)

Connectivity Setup Worksheet

Paperwork

3-1

3-2

3-5

3-8

3-9

3-11

3-20

3-32

3-42

3-47

3-53

3-54

3-58

3-65

3-70

3-72

Chapter 3 - Setup Instructions 3-1

GERAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Section 3-2 Set Up Reminders

3-2-1 Average Installation Time

Once the site has been prepared, the average installation time required is shown in Tab le 3 -2 below.

Table 3-2 Average Installation Time

Description Average Installation Time Comments

Unpacking the scanner 0.5 hours

Installing the scanner / options / printers 0.5 to 1.5 hours depends on required configuration

DICOM Option (connectivity) 0.5 - 1.5 hours depends on configuration amount

3-2 Section 3-2 - Set Up Reminders

GEDRAFT LOGIQ P9/P7

CAUTION

WARNINGWARNING

WARNINGWARNING

When moving or lifting the system, grasp it only at the rear
handle.

WARNING

WARNING

Do NOT pull or lift the system with the front handle
of the user interface (operator panel).

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-2-2 Installation Warnings

1) Since the LOGIQ P9/P7 weighs approximately 90 kg (200 lbs.) without peripherals, two people are
required to unpack it.

2) There are no operator serviceable components. To prevent shock, do not remove any covers or
panels. Should problems or malfunctions occur, unplug the power cord.

Only qualified service personnel should carry out servicing and troubleshooting.

3-2-2-1 Moving/Lifting the System

Figure 3-1 moving or lifting the system

3-2-2-2 System Acclimation Time

After being transported, the LOGIQ P9/P7 system may be very cold or hot.
It requires one hour for each 2.5C increment if it's temperature is below 10C or above 40C.

Equipment damage possibility. Turning the system on without acclimation after arriving at site

!! CAUTION:

may cause the system to be damaged.

Table 3-3 Acclimation Time

60 55 50 45 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40

°C

140 131 122 113 104 96 86 77 68 59 50 41 32 23 14 5 -4 -13 -22 -31 -40

°F

1086420000002468101214161820

hrs

3-2-2-3 OPIO Position

If weight is placed on the OPIO (User Interface) in it’s extended position the console could tip over.

The system should NOT be moved with the OPIO (User Interface) extended. Move the

!! WARNING:

OPIO to it’s centered and locked position.

Monitor mounting mechanism may break if not properly supported (e.g., with packing

!! WARNING:

foam) during transportation.

Chapter 3 - Setup Instructions 3-3

GERAFT LOGIQ P9/P7

WARNINGWARNING

DANGER

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-2-2-4 Brake Pedal Operation

REMEMBER: If the front wheel brakes are engaged for transportation, release brake

!! WARNING:

pedals (brakes on front wheels under the foot rest) to disengage the lock.

3-2-3 Safety Reminders

WHEN USING ANY TEST INSTRUMENT THAT IS CAPABLE OF OPENING THE

!! DANGER:

AC GROUND LINE (I.E., METER’S GROUND SWITCH IS OPEN), DO NOT
TOUCH THE UNIT!

Two people should unpack the unit because of its weight.

!! CAUTION:

!! CAUTION:

!! CAUTION:

!! CAUTION:

Two people are required whenever a part weighing 16kg (35 lb.) or more must be lifted.

If the unit is very cold or hot, do NOT turn on its power until it has had sufficient time to
acclimate to its operating environment.

To prevent electrical shock, connect the unit to a properly grounded power outlet.
DO NOT use a three to two prong adapter. This defeats safety grounding.

DO NOT wear the ESD wrist strap when you work on live circuits and more than 30 V peak is
present.

!! CAUTION:

!! CAUTION:

!! CAUTION:

!! CAUTION:

DO NOT use a 20 Amp to 15 Amp adapter on the 120 Vac unit’s power cord.
This unit requires a dedicated 16 A circuit.

DO NOT operate this unit unless all board covers and frame panels are securely in place, to
ensure optimal system performance and cooling.
(When covers are removed, EMI may be present).

OPERATOR MANUAL(S)
The User Manual(s) should be fully read and understood before operating the LOGIQ P9/P7.
Keep manuals near the unit for reference.

ACOUSTIC OUTPUT HAZARD
Although the ultrasound energy transmitted from the LOGIQ P9/P7 ultrasound system is
within FDA limitations, avoid unnecessary exposure.
Ultrasound energy can produce heat and mechanical damage.

Figure 3-2 Environmental Labels

3-4 Section 3-2 - Set Up Reminders

GEDRAFT LOGIQ P9/P7

CAUTION

CAUTION

NOTICE

NOTICE

Indicator turns Red

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Section 3-3 Receiving and Unpacking the Equipment

Please read this section carefully before unpacking the LOGIQ P9/P7 ultrasound system and its

!! CAUTION:

!! CAUTION:

(optional) peripherals.

The LOGIQ P9/P7 ultrasound system, together with peripherals, probes and accessories are shipped
from the factory in a single durable shipping crate which is mounted on a raised wooden platform base.

Transport only with forklift or stacker truck.
During transport pay attention to the point of gravity (“tilt and drop” indicator)!

Have two people available to unpack the LOGIQ P9/P7.
Attempts to move the unit considerable distances (or on an incline) by one person alone, could
result in personal injury, and/or damage to the system.

Table 3-4 Shipping Carton - Dimensions and Weight

Description Height Width Depth

LOGIQ P9/P7

incl. peripherals and accessories

* Weight is approximate and will vary depending upon the supplied peripherals

1550 mm / 61 inch 706 mm / 27.7 inch 904 mm / 35.6 inch 120 kg / 267 lbs

Weight*

Before unpacking the unit:

• Inspect the crate for visible damage.

• Inspect the Drop and Tilt Indicator for evidence of accidental shock or tilting during transit (damage
incident, see: Figure 3-3 below).

Figure 3-3 Drop and Tilt Indicator

!! NOTICE:

!! NOTICE:

The device must only be transported in the original packaging!

Each shipping crate is composed of wooden base, cardboard box, re-usable plastic caps and cushions
inside. It is recommended to keep and store the shipping crate and all other packing materials (including
the support foams, anti-static plastic cover, etc.), in case the unit has to be moved to a different location.

Unpack the devices such a way that packaging can be reused.
For warranty purposes, storage of the above is required for one year from date of purchase.

If the shipping crate is damaged, please inform the GE sales representative immediately.

Chapter 3 - Setup Instructions 3-5

GERAFT LOGIQ P9/P7

Check whether delivery is complete
(according to packing list) and check visual damage!

The envelope with delivery address, packing list and
invoice is located on the front panel of the crate.

top cover

out sleeve

Option box on front of the system

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Section 3-3 Receiving and Unpacking the Equipment (cont?)

Figure 3-4 envelope at front panel of the crate

Table 3-5 Unpacking Procedure

Step Task

1.

Remove the top cover, then remove the out sleeve.

2.

Remove the option box on front of the system.

3-6 Section 3-3 - Receiving and Unpacking the Equipment

GEDRAFT LOGIQ P9/P7

monitor pad

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Table 3-5 Unpacking Procedure

Step Task

3.

Remove the monitor pads from the monitor and remove the 4 pads of the box bottom assy.

4.

Carefully remove foam packing material and plastic bag from the ultrasound unit and monitor.

Caution: Two people are needed in the next step due to the weight of the equipment.

5.

Unlock the casters and place the 4 caster's direction like the picture below and then using the incline plane
of the box bottom assy, slowly move the system from the box.

Note: Packing crate and material should be stored for future use.

Chapter 3 - Setup Instructions 3-7

GERAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Section 3-4 Packing materials - recycling information

The packing materials for LOGIQ P9/P7 are recyclable:

• The Transportation Box is made of cardboard.

• The inner reinforcements are made of Ethafoam (Polyethylene foam).

• The plastic foil is made of LDPE (Low Density Polyethylene).

3-8 Section 3-4 - Packing materials - recycling information

GEDRAFT LOGIQ P9/P7

NOTICE

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Section 3-5 Preparing for Set Up

3-5-1 Verify Customer Order

1) After unpacking the equipment, it is important to verify that all items ordered by the customer have
been received. Compare all items listed on the packing slip (delivery note) with those received.

It is recommended to keep and store the shipping carton and all other packing materials (including the

!! NOTICE:

Step Item Recommended Procedure

1

2

support foams, anti-static plastic cover, etc.), in case the unit has to be moved to a different location.
Unpack the devices such a way that packaging can be reused.
For warranty purposes, storage of the above is required for one year from date of purchase.

2) Visually inspect the system components using the following checklist.

Table 3-6 Damage Inspection Checklist - LOGIQ P9/P7 System

Main label Enter Serial Number: __________________________ (printed on main label, see: Figure 1-1 on page 1-13)

Console Verify that the system is switched OFF and unplugged. Clean the console and control panel.

3

Control Console

4

Probes

5

LCD Display

6

Fans Verify that the system’s cooling fans and peripheral fans are operating.

7

Rear Panel

8

Covers

9

Peripherals

10

Power Cord

Physically inspect the control console for missing or damaged items.
After switching on the system, verify the proper illumination of all the control panel buttons.

Check all probes for wear and tear on the lens, cable, and connector. Look for bent or damaged pins on the
connector and in the connector socket on the unit. Verify that the EMI fingers around the probe connector
socket housing are intact. Check the probe locking mechanism and probe switch.

Clean the LCD display by gently wiping with a dry, soft, lint-free non-abrasive folded cloth. Inspect the monitor
for scratches and raster burn.

Check the rear panel connectors for bent pins, loose connections and loose or missing hardware. Screw all
the cable connectors tightly to the connector sockets on the panel. Verify that the labeling is in good condition.

Check that all screws are tightly secured in place, that there are no dents or scratches and that no internal
parts are exposed.

Check and clean the peripherals in accordance with the manufacturer’s directions.
To prevent EMI or system overheating, dress the peripheral cables inside the peripheral cover.

Check the power cord for cuts, loose hardware, tire marks, exposed insulation, or any deterioration.
Verify continuity. Replace the power cord, as required.

NOTE: Report any items that are missing, back-ordered, or damaged, to your GE sales representative. The

contact address is shown in Contact Information on page 1-17.

Chapter 3 - Setup Instructions 3-9

GERAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-5-2 EMI Protection

This unit has been designed to minimize the effects of Electo-Magnetic Interference (EMI). Many of the
covers, shields, and screws are provided primarily to protect the system from image artifacts caused by
this interference. For this reason, it is imperative that all covers and hardware are installed and secured
before the unit is put into operation.

Ensure that the system is protected from electromagnetic interference (EMI), as follows:

• Operate the system at least 15 feet away from equipment that emits strong electromagnetic
radiation.

• Operate the system in an area enclosed by walls, floors and ceilings comprised of wood, plaster or
concrete, which help prevent EMI.

• Shield the system when operating it in the vicinity of radio broadcast equipment, if necessary.

• Do not operate mobile phones or other EMI emitting devices in the ultrasound room.

• Verify that all EMI rules listed in the following table are followed:

The LOGIQ P9/P7
qualified facilities, in terms of the prevention of radio wave interference. Operation of the ultrasound unit
in an inappropriate environment can cause electronic interference to radios and television sets situated
near the medical equipment.
For further details and EMI Prevention/Abatement refer to Section 2-2-3 "EMI Limitations" on page 2-4.

ultrasound unit is approved for use in hospitals, clinics and other environmentally

3-10 Section 3-5 - Preparing for Set Up

GEDRAFT LOGIQ P9/P7

WARNINGWARNING

CAUTION

2,5 m

1,5 m

1,5 m1,5 m

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Section 3-6 Connection of Auxiliary Devices

NOTE: Normally auxiliary devices and peripherals come pre-installed with the system.

Table 3-7 below outlines hardware installation procedures described in the sub-sections.

Table 3-7 Connection Procedures

Sub-section Description Page Number

3-6-1

3-6-2

3-6-3

3-6-3

3-6-4

3-6-5

3-6-6

3-6-7

Connecting the LCD Monitor

Connecting the Black & White Printer

Connecting the Color Printer

Connecting the Secondary “Patient” LCD Monitor

Connecting the Footswitch

Connecting the USB Flash Memory Stick

Connecting the external USB Hard disk (Handydrive)

General Remarks and Hints when using external USB-Devices

3-12

3-13

3-14

3-15

3-17

3-18

3-18

3-19

After each installation, the leakage currents have to be measured according to

!! WARNING:

!! CAUTION:

NOTE: For more detailed Safety Considerations when connecting auxiliary devices to the LOGIQ P9/P7

IEC 60601-1 respectively ANSI/AAMI ES60601-1.

Please observe that some printers may not be medical devices! If the Bluetooth Printer and/or
Line Printers are not medical devices, they have to be located outside of the patient
environment (according to IEC 60601-1 / ANSI/AAMI ES60601-1).

system, please review: Chapter 1 - Auxiliary Devices Safety, on page 1-10.

Chapter 3 - Setup Instructions 3-11

GERAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-6-1 Connecting the LCD Monitor

NOTE: The LCD monitor comes pre-installed with the system.

Figure 3-5 Connection Scheme - LCD Monitor

3-12 Section 3-6 - Connection of Auxiliary Devices

GEDRAFT LOGIQ P9/P7

WARNINGWARNING

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-6-2 Connecting the Black & White Printer

1) Power OFF/Shutdown the system as described in: Section 3-7-3 on page 3-25.

2) Connect the Black & White printer according to correct connection scheme as described in

Figure 3-6 on page 3-14.

NOTE: There are three USB ports (stack) on rear panel. The BW printer may be connected to any of the 3x

USB stack connector.

3) When all the cables are connected, press the Power ON switch on the Black & White printer.

4) Power ON/Boot up the LOGIQ P9/P7 system as described in Section 3-7-2 on page 3-21. All
software drivers are pre-installed for the designated Black & White printer only.

5) Verify the correct settings in the printer “Properties”, see: Section 3-8-5 "Adjustment of Printer

Settings" on page 3-37.

After each installation, the leakage currents have to be measured according to

!! WARNING:

IEC 60601-1 respectively ANSI/AAMI ES60601-1.

Chapter 3 - Setup Instructions 3-13

GERAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-6-2-1 Connection Scheme: B&W Printer

Figure 3-6 B&W Printer connection

3-14 Section 3-6 - Connection of Auxiliary Devices

GEDRAFT LOGIQ P9/P7

CAUTION

NOTICE

NOTICE

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-6-3 Connecting the Secondary “Patient” LCD Monitor

Secondary LCD “Patient” Monitor MUST NEVER be connected to the LOGIQ P9/P7 ultrasound

!! CAUTION:

!! NOTICE:

!! NOTICE:

systems mains supply directly!
Always connect it to the supplied Isolation Transformer!

The Secondary Monitor is the only item to be connected to the Transformer.

Secondary Monitor is NOT intended for diagnostic use.
It is an additional device used to allow the patient to watch the proceedings.

Take your time to think about the best position of the monitor in your facilities.
Patients should be able to view the monitor easily and without having to bend or turn around.

Connection to Secondary Monitor is via HDMI cable, but HDMI connector output does NOT carry audio
signal.

1) Power OFF/Shutdown the system as described in: Section 3-7-3 on page 3-25.

2) Connect the Secondary Monitor according to connection scheme (see: Figure 3-7 on page 3-16).

Chapter 3 - Setup Instructions 3-15

GERAFT LOGIQ P9/P7

HDMI to DVI / HDMI to HDMI cable

connected to the
rear side of the
2nd Monitor

Secondary Monitor

appropriate

Transformer

A Secondary “Patient” Monitor MUST NEVER

be connected to the LOGIQ P9/P7 ultrasound systems mains

supply directly!

Always connect it to an appropriate Isolation Transformer

CAUTION

!! CAUTION:

Composite (BNC) Cable
S-Video Cable

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-6-3 Connecting the Secondary “Patient” LCD Monitor (cont?)

Figure 3-7 Connection Scheme - Secondary LCD Monitor

3-16 Section 3-6 - Connection of Auxiliary Devices

GEDRAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-6-4 Connecting the Footswitch

The footswitch should be directly connected to any accessible USB-port on the LOGIQ P9/P7 (e.g., on
rear of the system).

NOTE: Connection of the Footswitch is always the same

(no differences between PC-Motherboard version of the system).

Figure 3-8 Connection Scheme - Footswitch

Chapter 3 - Setup Instructions 3-17

GERAFT LOGIQ P9/P7

NOTICE

NOTICE

NOTICE

NOTICE

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-6-5 Connecting the USB Flash Memory Stick

Before connecting an USB device, please read General Remarks and Hints when using external USB-

!! NOTICE:

Devices on page 3-19.

The USB Flash Memory Stick may be connected to an accessible USB port of the LOGIQ P9/P7
system. Refer to Section 3-9-2 "External I/O Connectors" .

An external USB Flash Memory Stick can be connected once the system is powered ON, or after
shutdown. The LOGIQ P9/P7, Windows detects the device and automatically installs a driver. During
this process several dialogs may pop up, starting with the „Found New Hardware” dialog.

NOTE: Memory drives or sticks may be sensitive to EMC interference.

This may affect system performance and/or image quality.

Before disconnecting an external USB-device (e.g., USB Stick), the system has to be informed about

!! NOTICE:

the removal of the device! For this purpose press the EJECT

button on the keyboard.

For further details refer to: Section 3-6-7-2 "External USB-Devices - Disconnection" on page 3-19.

3-6-6 Connecting the external USB Hard disk (Handydrive)

Before connecting an USB device, please read General Remarks and Hints when using external USB-

!! NOTICE:

Devices on page 3-19.

The external “Handydrive” HDD may be connected to an accessible USB port of the LOGIQ P9/P7
system. Refer to Section 3-9-2 "External I/O Connectors" .

An external USB Hard Disk Drive can be connected once the system is powered ON, or after shutdown.
The LOGIQ P9/P7, Windows detects the device and automatically installs a driver. During this process
several dialogs may pop up, starting with the „Found New Hardware“ dialog.

NOTE: Memory drives, sticks or HDD drives may be sensitive to EMC interference.

This may affect system performance and/or image quality.

Before disconnecting an external USB-device (e.g., USB Hard disk), the system has to be informed

!! NOTICE:

about the removal of the device! For this purpose press the EJECT
For further details refer to: Section 3-6-7-2 "External USB-Devices - Disconnection" on page 3-19.

button on the keyboard.

3-18 Section 3-6 - Connection of Auxiliary Devices

GEDRAFT LOGIQ P9/P7

WARNINGWARNING

NOTICE

CAUTION

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-6-7 General Remarks and Hints when using external USB-Devices

Do not connect or disconnect any external USB-devices to or from the system while

!! WARNING:

3-6-7-1 External USB-Devices - Connection

!! NOTICE:

3-6-7-2 External USB-Devices - Disconnection

!! CAUTION:

scanning a patient! The appearing dialogs could distract you from the scan!

When an external USB-storage device (such as a USB-memory stick or an external hard disk) is
connected to the LOGIQ P9/P7, Windows detects the device and automatically installs a driver. During
this process, several dialogs may pop up, starting with the “Found New Hardware“ dialog.

The device is then accessible using the drive letter the system assigned to it.

When connecting external USB devices, be sure to execute Safety Directions found in the
LOGIQ P9/P7 Basic User Manual.

Unplugging or ejecting USB devices without first stopping them can often cause the system to
crash and possibly result in loss of valuable data.

To stop the external device, press F3 EJECT

button.

Chapter 3 - Setup Instructions 3-19

GERAFT LOGIQ P9/P7

CAUTION

WARNINGWARNING

CAUTION

CAUTION

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Section 3-7 Completing the Set Up

3-7-1 Connecting the Unit to a Power Source

The connection of the LOGIQ P9/P7 ultrasound unit to a power source should be performed by a
qualified person who has completed basic LOGIQ P9/P7 System User Training. Use only the power
cords, cables and plugs provided by or designated by GE to connect the unit to the power source.

Prior to connect the LOGIQ P9/P7 unit to a power source, verify compliance with all electrical

!! CAUTION:

!! WARNING:

!! CAUTION:

and safety requirements. Check the power cord to verify that it is intact and of hospital-grade.
Products equipped with a power source (wall outlet) plug should be connected to the fixed
power socket that has a protective grounding conductor. Never use an adapter or converter to
connect with a power source plug (for example, a three-prong to two-prong converter).

The unit’s power must be supplied from a separate, properly rated outlet to avoid risk
of fire. Refer to Section 2-2-2-1 "LOGIQ P9/P7 Power Requirements" on page 2-3 for
rating information. The power cord should not, under any circumstances, be altered to
a configuration rated less than that specified for the current.

Whenever disconnecting the LOGIQ P9/P7 system from the electrical outlet, always observe the
safety precautions. First unplug the main power cable from the wall outlet socket, then from the
unit itself. Remove by pulling on the cable connector - DO NOT pull on the cable.

!! CAUTION:

The LOGIQ P9/P7 requires all covers!
Operate this system only when all board covers and frame panels are securely in place.
The covers are required for safe operation, good system performance and cooling purposes.

3-20 Section 3-7 - Completing the Set Up

GEDRAFT LOGIQ P9/P7

Circuit Breaker

Main Power

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-7-2 Power On / Boot Up

3-7-2-1 Scanner Power On

1) Ensure that the wall outlet is of appropriate type, and that the Circuit Breaker is turned off.

2) Uncoil the power cable, allowing sufficient slack so that the unit can be moved slightly.

3) Verify that the power cable is without any visible scratches or any sign of damage.

4) Verify that the on-site mains voltage is within the limits indicated on the rating label on the right side
of the rear panel.

5) Connect the Main Power Cable to the back of the system. Refer to Section 8-28 for details.

6) Connect the Main Power Cable to a hospital grade power outlet with the proper rated voltage.
Never use an adapter that would defeat the safety ground.

7) Switch ON the Circuit at the rear of the system.

Figure 3-9 Circuit and main power cable at rear of system

Chapter 3 - Setup Instructions 3-21

GERAFT LOGIQ P9/P7

NOTICE

On/Off Button

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-7-2-2 Back End Processor Boot Up

When AC power is applied to the scanner, the ON/OFF button on the control panel illuminates blue,

!! NOTICE:

indicating that the System (including the Back-end Processor) is in Standby mode.

8) Hold down the On/Off

button (see: Figure 3-10) on the control panel for ~3 seconds.

NOTE: The mains outlet of the system for peripheral auxiliary equipment are commonly switched with the

ON/OFF button. The power switch of any attached printer(s) needs to be in ON position before starting
the system. However, be aware some auxiliary equipment may switch itself to standby mode
(e.g., Color video printer) and must therefore be switched on separately.

When the ON/OFF button on the control panel is pressed, the System (including the Back-end
Processor) starts and the operating system is loaded which then leads the application software to
activate the scanner.

The system automatically performs an initialization sequence which includes the following:

- Loading the operating system.

- Running a quick diagnostic check of the system.

- Detecting connected probes

Figure 3-10 On/Off Button on Control Panel

As soon as the software has been loaded, the system enters 2D-Mode with the probe connected to port
nearest to a user.

NOTE: Total time used for start-up is about 2 minutes.

9) Adjust Height and position of control console.

3-22 Section 3-7 - Completing the Set Up

GEDRAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-7-2-3 During a normal boot, you may observe

A) Power is distributed to Peripherals, Operator Panel (control panel), Monitor, Front-End and

Back-End Processor.

B) The Back-End Processor and rest of the scanner starts with the sequence listed in following steps:

1) “Boot Screen” is displayed.

2) Back-End Processor is turned ON and starts to load the software.

3) The Start Screen (LOGIQ?) is displayed on the monitor.

4) Start-up progress bars indicating software loading procedures, are displayed on the monitor,
as shown in Figure 3-11 below.Start-up progress bars indicating software loading procedures,

Figure 3-11 GE Healthcare wallpaper with progress bar (R1.x.x)

Figure 3-12 GE Healthcare wallpaper with progress bar (R2.x.x and later)

Chapter 3 - Setup Instructions 3-23

GERAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

5) Startup GE

NOTE: Startup GE Healthcare wallpaper with progress bar may differ depending on product type and release.

6) The software initiates and sets up the Front-End electronics and the rest of the scanner
(incl. the clicking sound of the relays on the PIL board).

7) The Keyboard backlight is lit.

8) As soon as the software has been loaded, the 2D screen is displayed on the monitor.

3-24 Section 3-7 - Completing the Set Up

GEDRAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-7-3 Power Off / Shutdown

When you power off the unit, the system performs an automatic shutdown sequence

Figure 3-13 System Exit Window (R2 and R2.5)

Figure 3-14 System Exit Window (R3)

The SYSTEM - EXIT menu, used when power off the unit, gives you these choices:

Chapter 3 - Setup Instructions 3-25

GERAFT LOGIQ P9/P7

NOTICE

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

• Logoff

Use this button to log off the current user. The system remains ON and ready for a new user to log
on. If the Logoff button is dimmed, it indicates that no user is logged on to the unit at the moment.

• Shutdown

Use this button to shut down the system. The entire system will shut down. It is recommended to
perform a full shutdown at least once a week.

If the Shutdown button is dimmed, press the power button or Alt F10 to shut down the unit.

•Cancel

Use this button to exit from the System-Exit menu and return to the previous operation.

• Exit (Only available when logged in as GE Service with Service Dongle)

Select this button when you want to exit to the Windows Desktop.

• Sleep (R2 and R2.5 Only)

Use Sleep Mode when you do a portable exam in order to reduce the time to start up the system.
When you use Sleep Mode, it takes ~90 seconds to start up the system versus 2-3 minutes.

•Change Password

Use this button to change User Password.

!! NOTICE:

Refer to Section 4-2-5-4 "Sleep Mode Check" on page 4-14.

After turning off a system, wait at least 10 seconds before turning it on again.
The system may not be able to boot if power is recycled too quickly.

3-26 Section 3-7 - Completing the Set Up

GEDRAFT LOGIQ P9/P7
D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-7-3-1 Scanner Shutdown

1) If not already in read mode, freeze the image.

2) Press the ON/OFF button (see: Figure 3-10) on the control panel. Following dialog appears.

Figure 3-15 System - Exit (R2 and R2.5)

Figure 3-16 System - Exit (R3)

Chapter 3 - Setup Instructions 3-27

GERAFT LOGIQ P9/P7

WARNINGWARNING

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3) Select the SHUTDOWN button. The system performs an automatic full shutdown sequence.

4) Switch OFF the Circuit at the rear of the system.

NOTE: The mains outlet of the system for peripheral auxiliary equipment are commonly switched with the

ON/OFF button. So the auxiliary equipment need not to be switched ON/OFF separately.

Disconnection of the Main Power Cable is necessary!

!! WARNING:

For Example: When repairing the system.

3-28 Section 3-7 - Completing the Set Up

GEDRAFT LOGIQ P9/P7

CAUTION

Circuit Breaker

Main Power

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

5) After complete power down, disconnect the main power cable from the system or unplug it from the
AC wall outlet socket.

Figure 3-17 Circuit and main power at rear of system

!! CAUTION:

6) Press on the brakes to block the front caster wheels.

7) Disconnect probes. (Turn the probe locking handle counterclockwise and then pull the connector
straight out of the probe port.)

DO NOT disconnect a probe while running (Live Scan “Write” mode)!
A software error may occur. In this case switch the unit OFF (perform a reset).

Chapter 3 - Setup Instructions 3-29

GERAFT LOGIQ P9/P7

CAUTION

CAUTION

CAUTION

CAUTION

a. Active probe port
b. Pencil probe port

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-7-4 Transducer Connection

3-7-4-1 Connecting the Probe

Inspect the probe before and after each use for damage or degradation to the housing, strain

!! CAUTION:

!! CAUTION:

!! CAUTION:

relief, lens, seal, cable and connector. DO NOT use a transducer which appears damaged until
functional and safe performance is verified. A thorough inspection should be conducted during
the cleaning process.

Remove any dust or foam rests from the probe pins.

Fault conditions can result in electric shock hazard. Do not touch the surface of probe
connectors which are exposed when the probe is removed. DO NOT touch the patient when
connecting or disconnecting a probe.

Probes can be connected at any time, regardless of whether the console is powered on or off. To ensure
that the ports are not active, place the system in the image freeze condition.

!! CAUTION:

Figure 3-18 Probe port

To connect a probe:

1) Place the probe's carrying case on a stable surface and open the case.

2) Carefully remove the probe and unwrap the probe cord.

3) Put the probe in the probe holder.

DO NOT allow the probe head to hang free. Impact to the probe head could result in irreparable
damage. Use the integrated cable management hook to wrap the cord.

4) Hold the probe connector vertically with the cable pointing upward.

5) Turn the connector locking handle to the left.

6) Align the connector with the probe port and carefully push into place.

7) Turn the connector locking handle to the right to secure the probe connector.

8) Carefully position the probe cord so it is free to move and is not resting on the floor.

3-30 Section 3-7 - Completing the Set Up

GEDRAFT LOGIQ P9/P7

CAUTION

CAUTION

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-7-4-2 Connecting the CW Pencil Probe

Insert the probe connector into the probe port all the way seated in. Carefully position the probe cord so
it is free to move and is not resting on the floor.

3-7-4-3 Cable Handling

Take the following precautions with probe cables:

• Keep free from wheels

• Do not bend the cable acutely

• Avoid crossing cables between probes.

3-7-4-4 Activating the Probe

To activate the probe, select the appropriate probe from the probe indicators on the touch panel.

The probe's default settings for the mode and selected exam are used automatically.

Make sure that the probe and application names displayed on the screen correspond to the

!! CAUTION:

actual probe and application selection.

3-7-4-5 Deactivating the Probe

When deactivating the probe, the probe is automatically placed in standby mode.

To deactivate a probe:

1) Ensure the LOGIQ™ P9/P7

2) Gently wipe the excess gel from the face of the probe.

3) Ensure that the probe is placed gently in the probe holder.

3-7-4-6 Disconnecting the Probe

Probes can be disconnected at any time. However, the probe should not be active when disconnecting
the probe.

1) Ensure the probe is deactivated. Deactivate by selecting another probe or pressing Freeze.

2) Move the probe locking handle to the left.

3) Pull the probe connector straight out of the probe port carefully.

DO NOT allow the probe head to hang free. Impact to the probe head could result in irreparable

!! CAUTION:

damage. Use the integrated cable management hook to wrap the cord.

4) Ensure the cable is free.

5) Be sure that the probe head is clean before placing the probe in its storage box.

is in freeze mode. If necessary, press the Freeze key.

Chapter 3 - Setup Instructions 3-31

GERAFT LOGIQ P9/P7

NOTICE

D

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

Section 3-8 Printer Installation

NOTE: For Connection schemes refer to Section 3-6 "Connection of Auxiliary Devices" on page 3-11.

For further installation instructions see:

• Section 3-8-1 "Installing Digital Black & White Printer Sony UP-D898" on page 3-32

• Section 3-8-2 "Installing Digital Color Printer Sony UP-D25MD" on page 3-27

• Section 3-8-5 "Adjustment of Printer Settings" on page 3-37

3-8-1 Installing Digital Black & White Printer Sony UP-D898

1) Power off/Shutdown the system as described in: Section 3-7-3 on page 3-25.

2) Physically connect the printer cables as described on Section 3-6-2 on page 3-13.

After boot up of the system, verify the correct settings in the printer “Properties”,

!! NOTICE:

see: Section 3-8-4 "Adding Printer to the system" for assigning the Printer to the remote keys P1

P3

, P4, P5 and/or P6, and

see: Section 3-8-5 "Adjustment of Printer Settings" .

, P2,

3-32 Section 3-8 - Printer Installation