GE 45131 Owner's Manual

45131

Choice

ALERT

Choice

ALERT

™

Wireless Alarm System

Window/Door
Sensor

User’s Manual

™

Control all Sensors
& accessories from
one location

3

Table of Contents

Important Safeguards 4

Introduction

Installation 6

Assigning a Sensor to a Zone

Erasing a Sensor from a Zone 9

Testing a Sensor or your system 10

Low battery indicator 10-11

Battery warnings 11

F.A.Q.'S 12-13

FCC Warning 14

5

8

2

Before connecting or operating the Window/Door
Sensor, please read these instructions carefully and
save this manual for future reference.

Congratulations

The GE Choice Alert™ Wireless Alarm System is one
of the most affordable and expandable wireless
alarm systems available. You’ll discover the system
offers many features typically found in custom
installed Alarm systems.

The Choice Alert system is reliable and easy-to-use.
With Choice Alert you can select from a line of Sensors
and Accessories; start small and expand as you
need, or create a system that meets all your needs.
The Choice Alert System is protected by Priority
Code Selection technology which provides increased
security and trouble-free wireless connections. It
also guarantees the Control Center will only respond
to signals from your Sensor in and around your home,
and prevents anyone from tampering with your
system.

The user manual explains in simple steps how to
install, use and care for your new Choice Alert
Window/Door Sensor.

3

5

Important safeguards

PreCautions

1. Do not attempt to disassemble the Window/Door
Sensor, unless described in the user’s manual. There
are no user serviceable parts.

2.

Handle with Care – Avoid striking or shaking.
Improper use or storage could damage the Window/
Door Sensor. Modifying or tampering the device or its
internal components can cause a malfunction and
void the Window/Door Sensor’s warranty.

3. If you feel the Window/Door Sensor any part of
the Choice Alert system is not operating correctly or
as described, please contact Customer Service for
assistance (1-800-654-8483).

4

Introduction

2 - Screws and 2 - Plastic anchors

2 - Double sided tape

2- Screw caps

Mounting plate

Window/Door Sensor
with magnetic contact

The Window/Door Sensor is designed to be used
indoors or out. When mounted properly it can monitor
doors, windows, gates, cabinets, etc. – any door or
window that opens. When the door or window is
opened, the Sensor will transmit a signal to the Control
Center. The settings on the Control Center determine if
an alarm, alert or chime sounds

Parts Check List

Identify all the parts before proceeding.

5