GE 45130 User Manual
45130
Choice
ALERT
Choice
ALERT
™
Wireless Alarm System
Garage Door
Sensor
User’s Manual
™
Control all Sensors
& accessories from
one location
3
Table of Contents
Important Safeguards 4
Introduction
Installation 6
Assigning a Sensor to a Zone 7-8
Erasing a Sensor from a Zone
Testing a Sensor or your system 9-10
Low battery indicator 10
Battery warnings 11
F.A.Q.'S 12-13
FCC Warning 14
5
8-9
2
Before connecting or operating the Garage Door
Sensor, please read these instructions carefully and
save this manual for future reference.
Congratulations
The GE Choice Alert™ Wireless Alarm System is one
of the most affordable and expandable wireless
alarm systems available. You’ll discover that the
system offers many features typically found in custom
installed Alarm systems.
The Choice Alert system is reliable and easy-touse. With Choice Alert you can select from a line of
Sensors and Accessories; start small and expand
as you need, or create a system that meets all your
needs. The Choice Alert System is protected by Priority
Code Selection technology which provides increased
security and trouble-free wireless connections. It
also guarantees the Control Center will only respond
to signals from your Sensors in and around your home,
and prevents anyone from tampering with
your system.
The user manual explains in simple steps how to
install, use and care for your new Choice Alert
Garage Door Sensor.
If you have any questions or would like
additional information please visit our web site
www.jascoproducts.com, or contact our
Customer Service Group at 1-800-654-8483.
3
5
Important safeguards
PreCautions
1. Do not attempt to disassemble the Garage Door
Sensor, unless described in the user’s manual. There
are no user serviceable parts.
2.
Handle with Care – Avoid striking or shaking.
Improper use or storage could damage the Garage
Door Sensor. Modifying or tampering the device or its
internal components can cause a malfunction and
void the Garage Door Sensor’s warranty.
3. If you feel the Garage Door Sensor or any part of
the Choice Alert system is not operating correctly or
as described, please contact Customer Service for
assistance (1-800-654-8483).
4
Introduction
4 Screws
Double sided tape
Make sure you take the
cover off before installing
Garage Door Sensor
with mounting bracket
The Garage Door Sensor is designed to be used
specifically with vertical opening garage or shed doors.
When mounted properly it monitors when the door is
open or closed. If the door is opened, the Garage Door
Sensor will transmit a signal to the Control Center. The
settings on the Control Center determine if an alarm,
alert or chime sounds.
Parts Check List
Identify all the parts before proceeding.
5
Loading...