Garmin APOLLO NMC 2001, APOLLO NMC 2101 Approach Checklist

Apollo NMC 2001/2101

Approach Checklist

Location Action

Enroute

Load Approach

Within 30 nm
of Destination

IAF Active
Waypoint

FAF Active
Waypoint

At FAF (MAP
Becomes
Active)

At MAP
(TO/FROM
Transition)

Enable Approach & enter altimeter
setting
(Approach annunciator turns ON)
(CDI goes to 1 nm full-scale sensitivity)

Verify Approach annunciator is ON
Set OBS/HLD: ON for Procedure

Turn or Hold

OFF to sequence
Verify green Approach-Active
annunciator is ON
Verify altimeter setting is entered
Set OBS/HLD: OFF to sequence
to MAP

Verify Approach-Active annunciator
is ON
(CDI goes to 0.3 nm full-scale
sensitivity)

If NOT landing: Press OBS/HLD to

cancel Approach-Active
(Green Approach­Active annunciator turns OFF)
(Approach Annunciator remains ON)
(CDI goes to 1.0 nm full-scale sensitivity)

MAHP Active
Waypoint

Verify OBS/HLD is ON

Apollo NMC 2001/2101

DME-Arc Checklist

ActionLocation

At Arc Intercept

1. Verify/Set OBS/HLD ON

2. Manually select Flight Plan
leg to intercept

3. USE DME-Arc Page in
NAV mode

4. Verify or select DME-Arc
Reference Waypoint

5. Verify/Set autopilot in Heading
mode or disengaged

On Arc

1. Use DME-Arc page in NAV
mode and aircraft heading to
navigate

2. Use CDI/HSI to identify
inbound leg intercept

Inbound Leg
Intercept

1. Set/Verify OBS/HLD OFF

2. Use CDI/HSI to navigate

3. Press NAV twice to use
standard NMC NAV mode page

4. Use autopilot as desired

II MORROW

VISIONARY THINKING TODAY

P/N 561-1039-00
April 1996
http://www.iim.ups.com

2345 Turner Rd., S.E.

Salem, OR 97302

USA Toll-Free 800.742.0077