GAI-Tronics F95090E User Manual

Pub. 42004-282

GAI-TRONICS® CORPORATION

A HUBBELL COMPANY

Model F95090E

12 V dc @ 8.3A R ack-Mount Power Supply

Confidentiality Notice

This ma nu a l is p r ovided solely a s a n oper a t iona l, inst a lla t ion, and maint ena nce guide and conta ins sensit ive
business and technical information which is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operat ion of your GAI- Tronics product or system.
This ma nual may not be disclosed in any form, in whole or in p art, dir ec tly or indirectly, to any t hird pa rty.

Application Notes

When used in GAI- Tronic s SmartS eries ca binet, this unit can p ower 40 M onitored Inp ut Modules (MI M)
or eight Monit ored Relay Modules (MRM) or 4 0 Audio Distr ibution Modules (AD M). I f MRMs a re used
in combinat ion with MIMs or ADMs, the total load r equ irement must be calculated to ensure that the

8.3A output is not exceeded.

• A line cord is att ached to t he u nit for c onnection to a standard 120 V ac duplex output. Do not change

or alter the line cord.

• The power supply module inside the chassis is equipped with an internal fuse protection which is not

accessible. Do not attempt to repair or replace the fuse—call GAI-Tronics for service.

Figure 1. Power Supply—Front View

GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA

610-777-1374  800-492-1212  Fax : [phone]

ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS

V

Pub. 42004-282

Model F95090E 12 V dc @ 8.3 A Rack-Mount Power Supply Page:

Figure 2. Power Supply—Rear T erminations

Installation

2 of 2

WARNING

Disconnect ac power during wiring. This device can present a shock haz ard. Please use c are when

handling this device and be sure that the ac p ower is not c onnec ted during wiring.

Wiring

Depth c learance behind the mounting rails should be at least twelve to fourteen inches for wiring.

1. Run p ower c ord to t he ac power ou tlet which will power this unit , but do not connect power unt il the

entire installa tion is complete.

2. Run the dc power conduct ors from the devices requiring 12 V dc p ower, t o the output terminals as

shown in Figure 2.

Specifications

Input power ....................................................Nominal: 120 V ac; Range: 85-264, 50/60 Hz, single phase

Output power....................................................................................................12 V dc @ 8.3A maximum

Output type...............................................................................................................Switched @ 120 kHz

Efficiency ....................................................................................................76% typical @ maximum load

Controls................................................................................................ On/off toggle switch on f ront p anel

Indicators ................................................................. Red LED on front panel (illuminates when operating)

Material/Finish..............................................16 gauge cold rolled steel with gray polyurethane paint finish

Mounting....................................................................Standard 3U (5.25 inch) 19-inch EIA rack mounting

Connections .................................................................................................... Barrier-type terminal blocks

Dimensions...............................................................5.25 (133) H × 19 (483) W × 6 (152) D; inches (mm)

Temperature range................................................................................0º C to +49º C (+32º F to +120º F)

Humidity......................................................................................................... 0% to 85% non-condensing

Weight.........................................................................................................Approximately 5 lbs (2.26 kg)

\\s_eng\gtc proddoc s \ s t andard iom s - current release\42004 inst r. m anuals \ 42004-282. doc

3/98