Fusion MS-BT200 User Manual

ALTERNATIVE MOUNTING: REMOVE LINER ON ADHESIVE PAD AND STICK UNIT TO BULKHEAD

DRILL PILOT HOLE

SATELLITE CONNECTOR

3 4

MS-BT200 Manual Outlines.indd 1-4 9/07/13 2:13 PM

TROUBLESHOOTING

Problem Solution

When I play music on my smartphone there is no audio output through the main head unit.

When I search for Bluetooth devices I am unable to ﬁnd the FUSION MS-BT200 on my smartphone

• Ensure that you have paired with the MS-BT200 (please refer to your smartphone or media player user manual).

• Ensure that your smartphone’s music player is conﬁgured to play music over Bluetooth.

• Ensure that the marine head unit is powered on and the Bluetooth input source is selected.

• Ensure the MS-BT200 is connected to the Satellite Radio connector as per the

installation instructions.

• The name of the MS-BT200 in discovery (pairing) mode is the same name given to your FUSION Stereo. The default name is the stereo Product Name e.g. “MS-700”.

• Ensure that the marine head unit and MS-BT200 are powered on.

• Ensure the MS-BT200 is connected to the Satellite Radio connector as per the installation instructions

• Ensure the Satellite Radio port is conﬁgured for Bluetooth operation. Bluetooth operation is selected in the Source page of the Settings menu.

Can’t select Bluetooth Source

• Check MS-BT200 cable connection

• If you are in USA Tuner mode check Bluetooth source is selected Settings>Sources>Accessory

>Bluetooth

7 8

MS-BT200 Manual Outlines.indd 5-8 9/07/13 2:13 PM