Owner’s Manual
Please read before using this unit.
DVD/CD Player
Owner's Manual
MSD115
Supplied Accessory
• Remote control
(NB070UD) with
two AA batteries
Before Using Your Unit
If your TV has AUDIO/VIDEO input jacks, see the section
“Connections” on page 6. If not, it is still possible to connect this
unit to your TV by using a STEREO AUDIO/VIDEO RF Modulator
(commercially available.) In this case, follow the instructions below.
1) Connect the AUDIO/VIDEO output jacks of this unit to the
AUDIO/VIDEO input jacks of your RF Modulator by audio and
video cables.
2) The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then connect the RF cable to your RF Modulator (usually marked “ANT
IN”.)
3) Connect your RF modulator to your TV by another RF cable.
4) Set your RF modulator’s channel 3/4 switch to either 3 or 4,
whichever the TV channel is least used in your area. If your RF
modulator has a Modulator/Antenna switch, set it according to
your RF modulator’s manual.
5) Turn on your TV and choose the same channel as you set the
RF modulator’s channel 3/4 switch to.
For more details, follow the instructions supplied with the RF
Modulator.
If your TV does not have AV input jacks.
Antenna
Cable
Signal
Stereo Audio/Video RF Modulator
(commercially available)
ANT IN
AC 120V
2
Hint
Hint
• The quality of picture may become poor if the unit is connected
to an RF Modulator.
If you need additional operating assistance after
reading this owner’s manual, please call
TOLL FREE : 1-800-605-8610
or visit our web site at http://www.funai-corp.com
•
Audio/Video cables
(WPZ0102TM015/
WPZ0102LTE01/
WPZ0102CAB01)
TO TVCHANNEL VIDEO AUDIO
RL34
Audio/Video
(Supplied)
RF Cable (Not supplied)
3
• Owner’s Manual
(1VMN21627)
(Back of this unit)
L
AUDIO OUT
DIGITAL
AUDIO OUT
COAXIAL VIDEO
R
OUT
1
Cables
S-VIDEO
OUT
(Back of TV)
Antenna in jack
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
Table of Contents
Precautions
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
■ Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Avoid the Hazards of Electrical Shock and Fire . . . . . . . 4
Moisture Condensation Warning . . . . . . . . . . . . . . . . . . 4
About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Symbols Used in This Manual . . . . . . . . . . . . . . . . . . . . 4
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
■ About the Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Unplayable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setup
■ Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connection to an Audio System. . . . . . . . . . . . . . . . . . . 7
Rear Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
■ About the Remote Control . . . . . . . . . . . . . . . . . . . . . 8
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing the Batteries for the Remote Control . . . . . . . . 8
Functions
■ Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
■ On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
■ Search Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using Title / Chapter Search . . . . . . . . . . . . . . . . . . . . 11
Using Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
■ Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
■ Repeat / Random / Programmed Playback . . . . . . . . 12
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Repeat A-B Playback. . . . . . . . . . . . . . . . . . . . . . . . . . 12
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Programmed Playback. . . . . . . . . . . . . . . . . . . . . . . . . 12
■ Special Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
■ DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
LANGUAGE Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
DISPLAY Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
AUDIO Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PARENTAL Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
OTHERS Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Reset to the Default Setting
(except for PARENTAL Setting) . . . . . . . . . . . . . . . . . . 17
Information
■ Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . 17
■ Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
■ Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . 18
■ Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Quick Use Guide . . . . . . . . . . . . . . . . . . . . . .Back Cover
Precautions
SetupInformationEspañol
Functions
Precautions
WARNING
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
Precautions
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
:
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Laser Safety
This unit employs a laser.Only a qualified service person should remove the cover or attempt to service this device, due to possible
eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECI-
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO
LOCATION: INSIDE, NEAR THE DECK MECHANISM.
FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
BEAM.
FCC WARNING-This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification
is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning
chemical wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.
For Customer Use:
Read carefully the information located at the bottom of this unit and enter below the Serial No. Retain this information for
future reference.
Model No.
Serial No. _____________________
_____________________
–2–
EN
IMPORTANT SAFEGUARDS
1) Read Instructions - All the safety and operating instructions should be read before the product is operated.
2) Retain Instructions - The safety and operating instructions should be retained for future reference.
3) Heed Warnings - All warnings on the product and in
the operating instructions should be adhered to.
4) Follow Instructions - All operating and use instructions
should be followed.
5) Cleaning - Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6) Attachments - Do not use attachments not recommended by the product manufacturer as they may
cause hazards.
7) Water and Moisture - Do not use this product near
water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near
a swimming pool; and the like.
8) Accessories - Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart,
stand, tripod, bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the
product should follow the manufacturer’s instructions, and should use a
mounting accessory recommended
by the manufacturer.
9) A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to
overturn.
10) Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, and
these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have been
adhered to.
11) Power Sources - This product should be operated only
from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local
power company. For products intended to operate from
battery power, or other sources, refer to the operating
instructions.
12) Grounding or Polarization - This product may be
equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This
plug will fit into the power outlet only one way.This is a
safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
13) Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
product.
14) Lightning - For added protection for this product during
a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet. This will prevent damage to the product due to
lightning and power-line surges.
15) Power lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits.When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal.
16) Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17) Object and Liquid Entry - Never push objects of any
kind into this product through openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid
of any kind on the product.
18) Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
19) Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into
the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by follow-
ing the operating instructions. Adjust only those con-
trols that are covered by the operating instructions
as an improper adjustment of other controls may
result in damage and will often require extensive
work by a qualified technician to restore the product
to its normal operation,
e) If the product has been dropped or damaged in any
way.
f) When the product exhibits a distinct change in per-
formance - this indicates a need for service.
20) Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
21) Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.
22) Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
Precautions
–3–
EN
CDCD
CD
DVD-V
DVD-V
Installation Location
Symbols Used in This Manual
For safety and optimum performance of this unit:
• Do not stand the unit up vertically. Install the unit in
a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit
directly on top of the TV.
• Shield it from direct sunlight and keep it away from
sources of intense heat. Avoid dusty or humid
Precautions
places. Avoid places with insufficient ventilation for
proper heat dissipation. Do not block the ventilation
holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.
• Be sure to remove the disc and unplug the AC
power cord from the output before carrying the unit.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
Moisture Condensation Warning
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. Do not use this unit at least for 2 hours
until its inside gets dry.
About Copyright
Unauthorized copying, broadcasting, public
performance and lending of discs are prohibited.
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly
is prohibited.
The following symbols appear in some headings in this manual.
: Description refers to playback of DVD-Video discs.
: Description refers to playback of Audio CDs.
Maintenance
SERVICING
¡Please refer to relevant topics on the “Troubleshooting
Guide” on page 17 before returning the product.
¡If this unit becomes inoperative, do not try to correct
the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug,
and please call our help line mentioned on the front
page to locate an Authorized Service Center.
CLEANING THE CABINET
¡Use a soft cloth slightly moistened with a mild deter-
gent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.
CLEANING DISCS
¡When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center out. Do not wipe
in a circular motion.
¡Do not use solvents such as benzine, thinner, com-
mercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog records.
CLEANING THE DISC LENS
¡If this unit still does not perform properly although you
refer to the relevant sections and to “Troubleshooting
Guide” in this Owner’s Manual, the laser optical pickup
unit may be dirty. Consult your dealer or an Authorized
Service Center for inspection and cleaning of the laser
optical pickup unit.
DISC HANDLING
¡When you handle a disc hold it by its edge and try not
to touch the surface of the disc.
¡Always store a disc in its protective case when it is
not used.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
–4–
EN
DVD-Video
* 1,2,4,6
* 1,3,4,5,6,8
* 1,3,4,5,6,7
9,10
* 4,6
* 4,5,6,9,10
or
DVD-R
DVD-RW
DVD+R
DVD+RW
Audio CD
CD-R
CD-RW
Digital video
(MPEG2)
-
-
-
Digital audio
Region code
Mark (logo)
Playable
discs
Recorded
signals
Disc size
Disc types
12 cm
or
8cm
12 cm
or
8cm
Example
Title 1 Title 2
Chapter 1 Chapter 2 Chapter 1
Chapter 2
Chapter 3 Chapter 4
Example
Tra c k 1
Tra c k 2
Tra c k 5
Tra c k 6
Tra c k 3
Tra c k 4
Digital audio
About the Discs
Playable Discs
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot
be played back.
*2:
Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not
play them back. Even if they are played back, the sound or video quality will be compromised.
*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD
recorder. However, depending on the recording status of a disc, the disc may not be played back at all or
normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc with the
DVD recorder. Refer to the manual accompanying the DVD recorder.
*8: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be
played back at all or normally (the picture or sound may not be smooth, etc.).
*9: If there is too much recording space left on a disc (the used portion is less than 55 mm across), it may not
playback properly.
*10: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it
correctly.
Unplayable Discs
¡
NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / CD-I / Photo CD / Video CD / DVD with region codes other than 1 or ALL
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers
¡
On the following disc, the sound MAY NOT be heard.
Super Audio CD
NOTE: Only the sound recorded on the normal CD layer can be delivered.
¡
Any other discs without compatibility indications
The sound recorded on the high density Super Audio CD layer cannot be delivered.
Precautions
–5–
EN
Setup
AUDIO OUT
L
R
DIGITAL
AUDIO OUT
COAXIAL VIDEO
OUT
S-VIDEO
OUT
LR
AUDIO IN
AUDIO OUT
L
R
VIDEO IN
VIDEO
OUT
S-VIDEO IN
S-VIDEO
OUT
Connections
If your TV has AUDIO/VIDEO input jacks, see the following instructions. If not, see the section “Before Using
Your Unit” on the front page.
Connection to a TV
Method 1
Good pictureBasic Audio
Method 2
Better picture
TV
S-Video
cable
(commercially
available)
Setup
Audio cable
(supplied)
Video
cable
(supplied)
This unit
(Analog) AUDIO OUT VIDEO OUT
Hint
Hint
• Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the
copy protection system.
S-VIDEO OUT
After you have completed connections
• Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input
channel (usually near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the
manual accompanying your TV.
INPUT MODES FOR COMMON TV BRANDS
• Listed below are inputs for common brand name TV’s.
Admiral: AUX
Curtis Mathis: LINE1, LINE2, 00, 90, 91, 92, 93
GE: INPUT, TV/VCR, 00, 90, 91, 92, 93
Hitachi: INPUT, AUX
JVC: VIDEO, VIDEO1, VIDEO2, VIDEO3
Kenwood: AUX
LXI-Series: 00
Magnavox: AUX CHANNEL
Panasonic: TV/VIDEO
RCA: INPUT, TV/VCR, 00, 90, 91, 92, 93
Samsung: TV/VIDEO
Sanyo: VIDEO, IN MENU
Sharp: 00
Sony: VIDEO1, VIDEO2, VIDEO3
Toshiba: TV/GAME
Zenith: 00
–6–
EN
LR
AUDIO OUT
L
R
COAXIAL
DIGITAL
AUDIO OUT
COAXIAL
Connection to an Audio System
Method 1
Stereo system
Analog audio
input jacks
AUDIO
Audio cable
(supplied)
This unit
(Analog)
AUDIO OUT
Connection
Setting
Connecting to Stereo System.
* To complete these settings, refer to pages 14-15.
Hint
Hint
•
Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
SETUP > AUDIO menu >
DOLBY DIGITAL
PCM
Method 2
Dolby Digital decoder,
MD deck or DAT deck
Digital audio
input jack
Audio Coaxial
Digital cable
(commercially
available)
DIGITAL
AUDIO OUT
Connection
Setting
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
Connecting to the other equipment (an MD deck or
DAT deck etc.) without Dolby Digital decoder.
* To complete these settings, refer to pages 14-15.
Hint
Hint
•
The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or
DAT deck.
•
By hooking this unit up to a Multi-channel Dolby Digital decoder,
you can enjoy high-quality Dolby Digital 5.1 channel surround
sound as heard in the movie theaters.
•
Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
SETUP > AUDIO menu >
DOLBY DIGITAL
BITSTREAM
PCM
Setup
Rear Terminals
DIGITAL AUDIO OUT COAXIAL jack
Connect an optional coaxial digital audio
cable here through the coaxial digital audio
in jack of a decoder or audio receiver.
AUDIO OUT jacks
Connect the supplied audio cable (red/white)
here through the audio in jacks of a TV or
other audio equipment.
AUDIO OUT
AUDIO OUT
L
DIGITAL
COAXIAL VIDEO
R
OUT
VIDEO OUT jack
Connect the supplied video cable
(yellow) here through the TV’s
video in jack.
–7–
S-VIDEO
OUT
S-VIDEO OUT jack
Connect an optional S-Video
cable here through the S-video
in jack of a TV.
EN
About the Remote Control
• To play a chapter or title
repeatedly.
• To play a track or disc
repeatedly.
• To display the current disc
mode.
• To display the current disc
mode.
• To open or close the disc
tray.
• To open or close the disc
tray.
• To select chapter or title
directly.
• To select track directly.
• To select camera angles on
a disc.
• To select subtitles on a disc.
• To select audio languages on
a disc.
• To select STEREO,
L-ch or R-ch.
• To repeat between your
chosen point A and B.
• To repeat between your
chosen point A and B.
• To return to the previous
operation in menu.
• To return to the previous
operation in menu.
• To search track.
• To search time.
• To set or search the
markers.
• To set black level on/off.
• To set virtual surround on/off.
• To arrange the playing
order or play randomly.
• To set virtual surround on/off.
• To call up the Menu
on a disc.
• To call up the Top Menu
on a disc.
• To magnify part of a picture.
(x2/x4)
• To search chapter, title or time.
• To set or search the
markers.
• To call up the DVD setup
menu.
• To clear the markers.
• To cancel the point for A-B
repeat.
• To cancel the point for A-B
repeat.
• To clear the markers.
• To remove status number
in program input.
• To clear the numbers
entered incorrectly.
• To clear the numbers
entered incorrectly.
• To search forward/backward
through a disc.
• To begin slow forward
/reverse playback during
the pause mode.
• To search forward/backward
through a disc.
• To advance playback
one frame at a time.
• To pause disc playback.
• To pause disc playback.
• To stop playback. • To stop playback.
• To turn the unit on or off.
• To turn the unit on or off.
• To begin disc playback. • To begin disc playback.
• To skip chapters. • To skip tracks.
• To move the cursor and
determine its position.
• To move the cursor and
determine its position.
STANDBY–ON
DISPLAY
MENU
TOP MENU
ZOOM
SUBTITLE
MODE
ANGLE
SEARCH
MODE
REPEAT
A-B
AUDIO
CLEAR
123
456
789
0
+1 0
PAUSE
PLAY
STOP
SETUP
DVD-V
DVD-V
CD
CD
Button
(Alphabetical order)
Disc
ENTER
RETURN
REV FWD
OPEN/CLOSE
SKIP
• To call up the DVD setup
menu.
STANDBY–ON
AUDIO
SUBTITLE
ANGLE
REPEAT
CLEAR
A-B
PAUSE
SETUP
TOP MENU
MENU
ENTER
MODE
ZOOM RETURN
SLOW
SKIP
OPEN/ CLOSE
DISPLAY
SEARCH
MODE
123
456
789
0 +10
PLAY
REV FWD
STOP
2
1
3
IR
SENSOR
DISC IN
STANDBY-ONSTOPOPEN/CLOSE PLAY
y
Remote Control
Setup
Installing the Batteries
for the Remote Control
Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote
control.
Keep in mind the following when
using the remote control:
•
• The maximum operable ranges
- Beeline: approx. 23 feet (7m)
- Either side of the center:
- Above: approx. 16 feet (5m)
- Below: approx. 10 feet (3m)
Make sure that there is no obstacle
between the remote control and the
remote sensor on the unit.
from the unit are as follows.
approx. 16 feet (5m) within 30°
within 15°
within 30°
–8–
EN
DVD-V
DVD-V
CDCDCDDVD-V
DVD-V
DVD-V
DVD-V
CDCDCDDVD-V
DVD-V
Functions
CD
IR
SENSOR
DISC IN
STANDBY-ONSTOPOPEN/CLOSE PLAY
y
CDCDCDDVD-V
DVD-V
DVD-V
DVD-V
Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.
Playback
Before: Turn on the TV, amplifier and any
other equipments which are connected
to this unit. Make sure the TV and audio
receiver (commercially available) are set
to the correct channel.
DVD-V
DVD-V
1
1
Press [STANDBY-ON] to turn on the DVD/CD Player.
2
2
Press [OPEN / CLOSE] and insert a disc with label facing
CD
CD
up.
3
3
Press [PLAY B] to start playback.
4
4
Press [STOP C] to stop playback.
SEARCH
MODE
DISPLAY
123
456
789
CLEAR
0 +10
SKIP
PAUS E
SLOW
PLAY
REV FWD
STOP
TOP MENU
OPEN/CLOSE
MENU
2
2
STANDBY–ON
1
1
3
3
4
4
AUDIO
SUBTITLE
ANGLE
REPEAT
A-B
SETUP
DVD menu
Some discs contain menus which allow you to customize
DVD playback. Use [KK/ LL/ ss/ BB] to select an item, then
press [ENTER] (or [PLAY BB]).
Calling Up a Menu Screen during Playback
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
Hint
Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for more details.
Resume
Press [STOP CC]. Resume
message will appear on the TV
screen.
[PLAY BB], playback will
Press
resume from the point at which playback was stopped.
The resume information stays on even when unit is in standby mode.
Hint
Hint
•To cancel resume, press [STOP CC] one more time during the stop
mode.
Resume ON
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Paused and Step-by-Step Playback
2
2
2
2
Lights up when a disc is
inserted.
Hint
Hint
•
A “prohibited icon” may appear at the topright on the TV screen when the operation
is prohibited by the disc or this unit.
• Some DVDs may start playback from title 2 or 3
due to specific programs.
•
During the playback of a two-layered disc, pictures may stop
for a moment.This happens while the 1st layer is being
switched to the 2nd layer. This is not a malfunction.
TIP:
You can change the On-Screen language in “PLAYER MENU” setting. (Refer to page 14.)
2233441
1
Lights up when
power is on.
Fast Forward/Reverse Search
Press [FWD gg] or [REV hh] repeatedly during playback to select the required forward or
reverse speed.
To continue playback, press [PLAY B].
Hint
Hint
•
For DVDs, fast forward or reverse search speed is different depending on
the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50) and 5(x100).
•For Audio CDs, approximate speed is 1(x2), 2(x8) and 3(x30).
E
Slow Forward/Slow Reverse
Press [FWD gg] or [REV hh] repeatedly during the pause mode to select the required forward or reverse speed.
To continue playback, press [PLAY B].
Hint
Hint
• Slow forward or reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8) and 3(1/2).
• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the
slow playback mode are blurred. (Refer to pages 14-15.)
Zoom
Press [ZOOM] repeatedly during playback to select the
required zoom factor: x2, x4 or OFF.
x2 x4
1
Functions
1
Press [PAUSE FF] during playback.
To continue playback, press [PLAY B].
The disc goes forward by one frame each time
is pressed during the pause mode.
To continue playback, press [PLAY B]
Hint
Hint
• On DVDs, set “STILL MODE” to “FIELD” in the Display menu if pictures in the pause mode are blurred. (Refer to pages 14-15.)
Use [KK/ LL/ ss/ BB] to slide the zoomed picture across the
screen.
To exit zoom function, press [ZOOM] repeatedly to select
[PAUSE FF]
.
OFF.
Hint
Hint
• Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
• The picture may be distorted when you press [PAUSEkk] or
[REV hh] repeatedly in the zoom mode.
• It may take several seconds to slide the zoomed picture.
–9–
EN
On-Screen Display
DVD-V
DVD-V
CDCD
CD
4/12 0:03:21 - 0:02:15
T
4/12 0:13:45 - 0:45:40
T
11/16 0:00:00 - 0:03:30
1/3 0:00:00 - 1:23:45
TL1
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
Current playback status
1
1
2
2
Remaining time of the current chapter
Elapsed time of the current chapter
CH(Chapter):
Current chapter number / Total chapters
Remaining time of the current title
Elapsed time of the current title
TT(Title):
Current title number / Total titles
1
1
2
2
3
3
Current playback status
Remaining time of the current track
Elapsed time of the current track
TR(Track):
Current track number / Total tracks
ALL:
Current track number / Total tracks
Current repeat setting appears only
when the repeat setting is active
T: Track repeat
A: All Tracks repeat
AB:A-B repeat
Remaining time of the entire disc
Elapsed time of the entire disc
3
3
Functions
4
4
Layer numbers, appears only when
playing a two-layered Disc
L0: Layer 0 is playing
L1: Layer 1 is playing
Current repeat setting appears only
when the repeat setting is active
C: Chapter repeat / T: Title repeat /
AB:A-B repeat
BIT RATE: The amount of audio and
video data currently being read
Hint
Hint
• When you are playing a disc in PROGRAM or RANDOM mode,
PROGRAM (or RANDOM) will be displayed instead of .
2
2
–10–
EN
Search Function
CDCDCDDVD-V
DVD-V
1:29:00
TOTAL
1:29:00
TOTAL
SEARCH
MODE
PLAY
CDCDCDDVD-V
DVD-V
SEARCH
MODE
ENTERENTERENTER
SEARCH
MODE
PLAY
ENTERENTERENTER
RETURN
PLAY
CDCD
CD
/29
/29
/29
DVD-V
DVD-V
/12
/12
123
456
789
0
+1 0
SEARCH
MODE
SEARCH
MODE
PLAY
TR 1 TR 2 TR 3 TR 4
Current Track
(TR)
SKIP
SKIP
CH 1 CH 2 CH 3 CH 4
Current Chapter
(CH)
or
SKIP
TT 1 TT2 TT3 TT4
Current Title
(TT)
SKIP
SKIP
SKIP
SKIP
SKIP
PLAY
123
456
789
0
+1 0
123
456
789
0
123
456
789
0
+1 0
Using Track Search
1
1
•For single digit tracks (1-9), press a
single number (e.g. track 3, press
•To play track 26, press [+10], [2], [6]
of the Number buttons.
1
1
2
2
within 30 seconds
Using [SKIP
Using [SKIP
1
1
HH
HH
/
/
GG
GG
]
]
[3]).
Using Title / Chapter Search
1
1
Press once for the chapter search.
Press twice for the title search.
2
2
within 30 seconds
HH
Using [SKIP
Using [SKIP
1
1
Hint
Hint
• Depending on the disc being played, this
function can also be performed by directly
entering the desired chapter number with
the Number buttons. Refer to the manual
accompanying the disc.
•For CDs, Track Search is not available for
Programmed or Random Playback.
HH
/
/
GG
GG
]
]
Using Time Search
1
1
Press repeatedly until
the Time Search display
appears.
2
2
within 30 seconds
Hint
Hint
• When there is no need to enter a number,
“0” appears automatically.
For example, “0 : 0-:--” appears in the
Time Search display if the total time of the
title or track is less than 10 minutes.
[CLEAR] to erase the incorrect
• Press
input at step [2].
Functions
Marker Setup
This feature allows you to assign a specific
point on a disc to be called back later.
o set a marker
TTo set a marker
1
1
Press repeatedly until
the marker display
appears.
2
2
or
3
3
o return to the marker
TTo return to the marker
later
later
1
1
Press repeatedly until
the marker display
appears.
2
2
or
3
3
at the desired marker
•
Playback will restart from the specific point
which you set.
–11–
o e
xit the marker displayy
TTo e
xit the marker displa
1
1
Hint
Hint
• Opening the disc tray or putting unit in
standby mode will erase all markers.
• Selecting “AC” at step [2] in the section “To
set a marker” will also erase all markers.
•To clear a marker, select the marker to be
cleared at step [2] in the section “To return
to the marker later,” and then press
[CLEAR].
EN
Repeat / Random / Programmed Playback
DVD-V
DVD-V
CDCDCDDVD-V
DVD-V
CDCDCDDVD-V
DVD-V
CDCD
CD
REPEAT
CDCD
CD
A-B
A-B
A-
A-B
CDCD
CD
MODE
CD-DA TOTAL 0:00:00
ENTER
PLAY
PLAY
PLAY
STOP
MODE
STOP
ENTER
Repeat Playback Programmed PlaybackRepeat A-B Playback
Repeat function is available only during
playback.
1
1
Each time you press [REPEAT], repeat
function changes as example below.
CHAPTER
TITLE
OFF
TRACK
Functions
ALL
OFF
Hint
Hint
• Repeat setting will be cleared when moving to another title, chapter, or track.
• Repeat playback may not function with
some discs or during repeat A-B playback.
(current chapter repeat)
(current title repeat)
(repeat
off)
(current track repeat)
(
entire disc repeat)
(repeat
off)
1
1
at your desired starting point (A)
2
2
at your desired end point (B)
• Point B should be in the same title or
track as point A.
Hint
Hint
•To exit the sequence, press [A-B] so that
OFF appears.
•To cancel Point A, press
• This function does not work in the other
repeat modes.
[CLEAR].
Random Playback
This function shuffles the playing order of
tracks instead of playback in the sequence.
1
1
Press twice
2
2
Hint
Hint
•To repeat the current track in the random
selections, press
until “ TRACK” appears during playback.
•To repeat the entire random selections,
press
[REPEAT] repeatedly until “ ALL”
appears during playback.
RANDOM
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
PLAY
.
[REPEAT] repeatedly
You may determine the order in which
tracks will play.
1
1
Press once.
2
2
or
ENTER
ENTER
3
3
PLAY
Hint
Hint
• Press [CLEAR] at step [2] to erase the
most recently entered track.
•To erase all programmed tracks at once,
select “ALL CLEAR’’ and press
step [2].
• While a program is being played back,
[STOP CC] works as follows;
⇒
Press [STOPCC] and [PLAY BB] next, so
that the programmed playback restarts.
⇒
Press [STOP CC] twice and [PLAY BB]
next, so that playback restarts from the
first track in the original order. However,
your programmed playback can be
restarted when you follow the above
steps. (Your programs are still stored until
either the disc is removed or unit is put in
stnaby mode.)
•To repeat the current track in the program,
press
“ TRACK’’ appears during playback.
•To repeat the entire program, press
[REPEAT] repeatedly until “ ALL’’
appears during playback.
• Up to 99 tracks can be
ordered.
•
If eight or more tracks were in a
program, use
to see all the tracks.
[REPEAT] repeatedly until
TOTAL
[SKIP HH/ GG]
[ENTER] at
–12–
EN
Special Settings
DVD-V
DVD-V
1.ENG Dolby D 3/2.1ch 48k/ 3
AUDIO
CDCD
CD
STEREO
DVD-V
DVD-V
1.ENG/6
DVD-V
DVD-V
1 / 8
ANGLE
ON
OFF
DVD-V
DVD-V
CDCDCDDVD-V
DVD-V
OFF
RETURN
SUB TITLE
1
1.ENG/6
OFF
PLAY
PLAY
SUB TITLE
PLAY
PLAY
PLAY
MODE
ENTERENTERENTER
PLAY
RETURN
ENTERENTERENTER
PLAY
AUDIO
Subtitle Language
This unit allows you to select a subtitle
language (if available) during DVD playback.
1
1
Each time you press [SUBTITLE], subtitle language changes as example
below.
ENG
FRE
(English subtitles)
(French subtitles)
...
OFF
(no subtitles)
To set subtitle ON/OFF
1
1
2
2
Audio Language
This unit allows you to select an audio
language (if multiple languages are
available) during DVD playback.
1
1
Each time you press [
AUDIO]
, audio
language changes as example below.
ENG
SPA
(English audio)
(Spanish audio)
...
FRE
(French audio)
Camera Angles
Some DVD discs may contain scenes which have been
shot simultaneously from various angles.You can change the camera angle if the ( ) icon appears on
the screen. If the “ANGLE ICON” setting is “OFF” in the OTHERS menu, the
() icon will not appear. (Refer to
pages 14-16.)
1
1
Stereo Sound Mode
This unit allows you to select a sound
mode during CD playback.
1
1
Each time you press [
AUDIO]
, sound
mode changes as example below.
STEREO
(right and left channels
are active)
L-ch
R-ch
(left channel is active)
(right channel is active)
Virtual Surround
You can enjoy stereophonic virtual
world on your existing 2 channel stereo
system.
1
1
MODE
Press twice.
(once for CD)
Functions
Hint
Hint
• If your language is not shown after press-
[AUDIO] or [SUBTITLE] several times,
ing
the disc may not have that language.
However, some discs allow audio language
or subtitle language setting on the disc
menu. (Operation varies depending on the
disc, so refer to the manual along with the
disc.)
•When “NOT AVAILABLE” appears on the
TV screen, it means no subtitle is recorded
on the scene.
•If you choose a language that has a threeletter-language code, the code will be displayed every time you change the subtitle
language setting. If you choose any other
languages, ‘---’ will be displayed instead.
(Refer to page 18.)
Black Level Setting
Adjust the Black Level Setting to make
the dark areas of the TV picture brighter.
1
1
2
2
ON: Makes the dark areas brighter.
OFF: Shows the original picture as recorded.
3
3
–13–
2
2
1: Natural effect.
2: Emphasized effect.
OFF: No effects (original sound).
3
3
Hint
Hint
For CD playback only
• Virtual Surround will not be effective if the
sound mode is set to something other than
STEREO. Refer to “Stereo Sound Mode”.
EN
SETUP CUSTOM
LANGUAGE
DISPLAY
AUDIO
PARENTAL
OTHERS
SETUP
QUICK
CUSTOM
INITIALIZE
ENTERENTERENTER
ENTERENTERENTER
SETUP
STOP
ENTERENTERENTER
ENTERENTERENTER
SETUP
SETUP OTHERS
ANGLE ICON
AUTO POWER OFFONON
SETUP AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
BITSTREAM
SETUP DISPLAY
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
SETUP LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
OFF
ENGLISH
ENGLISH
SETUP
QUICK
CUSTOM
INITIALIZE
SETUP
STOP
SETUP QUICK
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
BITSTREAM
ENTERENTERENTER
DVD Setup
SETUP PARENTAL
PASSWORD
Please enter a 4-digit password.
SETUP
QUICK
CUSTOM
INITIALIZE
SETUP LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
OFF
ENGLISH
ENGLISH
ENTERENTERENTER
UICK SETUP Menuu
QQUICK SETUP Men
You can select the “PLAYER MENU”, “TV ASPECT” or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.
1
1
2
2
or
<SETUP MENU>
Confirm that “QUICK” is selected.
You can change the settings of the unit.
QUICK
•
1
1
<SETUP MENU>
Functions
LANGUAGE menu
Select the desired item.
A
P14 (Step [5])
P15 (Step [5])
B
P15 (Step [5])
C
•
Refer to the sections “PLAYER
MENU”, “TV ASPECT” or “DOLBY
DIGITAL” on page 14 or 15.
CUST
CUST
OM Menuu
OM Men
on pages 14-16 indicates DVD Setup menus also accessible from the QUICK SETUP menu.
3
3
or
Select the desired item.
OTHERS menu
DISPLAY menu
2
2
Select “CUSTOM”.
AUDIO menu
or
PARENTAL menu
A
Follow steps 1 to 3 in the “CUSTOM Menu” section above.
4
page 14
A
LANGUAGE Setting
Select the desired item.
4
or
LANGUAGE menu
page 15
B
5
5
AUDIO ∗∗1 ∗∗2
(Default: ORIGINAL)
Sets the audio language.
SUBTITLE:∗∗1 ∗∗2
(Default: OFF)
Sets the subtitle language.
DISC MENU:∗∗1
(Default: ENGLISH)
Sets the language in DVD
menu.
PLAYER MENU:
(Default: ENGLISH)
Sets the language for the
On-Screen Display.
page 15
C
Select the desired language.
or
AUDIO
ORIGINAL
ENGLISH
FRENCH
SUBTITLE
OFF
ENGLISH
FRENCH
DISC MENU
ENGLISH
FRENCH
SPANISH
QUICK
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
–14–
page 16
D
6 To exit the menu
6
Hint
Hint
∗1
• Language options are not available
with some discs.
• If OTHER is selected in the AUDIO,
SUBTITLE or DISC MENU screen,
press four-digit number to enter the
code for the desired language. (Refer
to the language code list on page 18.)
• Only the languages supported by the
disc can be selected.
∗2
• Language setting for Audio and
Subtitle are not available with some
discs. Then press
[SUBTITLE]. Details are on page 13.
[AUDIO] and
page 16
E
EN
SETUP AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
BITSTREAM
DISPLAY Setting
TV ASPECT
4:3
LETTER BOX
4:3
PAN & SCAN
16:9
WIDE
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
STILL MODE
AUTO
FIELD
FRAME
SETUP
SETUP
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL BITSTREAM
OFF
ON
BITSTREAM
ENTERENTERENTER
ENTERENTERENTER
ENTERENTERENTER
ENTERENTERENTER
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL BITSTREAM
ON
ON
PCM
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL BITSTREAM
ON
OFF
BITSTREAM
SETUP DISPLAY
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
ENTERENTERENTER
ENTERENTERENTER
ENTERENTERENTER
B
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 14.
4
Select the desired item.
4
or
DISPLAY menu
5
5
TV ASPECT:
QUICK
(Default: 4:3 LETTER BOX)
See Hint to the right.
Select the
desired
setting.
or
6
To exit the menu
6
Hint
Hint
TV ASPECT:
STILL MODE:
(Default: AUTO)
See Hint to the right.
Select the
desired
setting.
or
• Select “4:3 LETTER BOX”, so
that black bars may appear on
the top and bottom of the
screen.
• Select “4:3 PAN & SCAN” for
a full height picture with both
sides adjusted.
• Select “16:9 WIDE” if a widescreen TV is connected to this
unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “FIELD”, the picture in the still mode will be
stabilized.
• If you select “FRAME”, the
picture in the still mode will be
highly defined.
AUDIO Setting
C
Choose the appropriate audio settings for your equipments. It only affects during the playback of DVD discs. Follow steps 1 to
3 in the “CUSTOM Menu” section on page 14.
4
4
Select the desired item.
or
AUDIO menu
5
5
DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48 kHz.
Set to “OFF” when outputting the original sound.
DOLBY DIGITAL:
QUICK
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital receiver.
• BITSTREAM: Outputs a Dolby Digital Signals.
• PCM: Convert the Dolby Digital into PCM (2 channel).
6 To exit the menu
6
Hint
Hint
DRC:
• This function is available
only on the discs which
are recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing disc with
copyright protection, the
sound will be down sampled at 48kHz, even if
you set to OFF.
This function is avail-
•
able only on digital outputting of a disc
recorded in 96kHz.
Functions
–15–
EN
SETUP PARENTAL
PASSWORD
Enter current password.
SETUP PARENTAL
PASSWORD
Please enter a 4-digit password.
PARENTAL Setting
ENTERENTERENTER
ENTERENTERENTER
PASSWORD CHANGE
PARENTAL LEVEL ALL
SETUP
PARENTAL LEVEL
ALL
8
7 [NC-17]
6 [R]
PASSWORD CHANGE
PARENTAL LEVEL ALL
SETUP PARENTAL
PASSWORD
Enter current password.
SETUP PARENTAL
PASSWORD
Please enter a 4-digit password.
ANGLE ICON ON
AUTO POWER OFF
ON
ON
OFF
ANGLE ICON ON
AUTO POWER OFF
ON
OFF
ON
SETUP OTHERS
ANGLE ICON
AUTO POWER OFF
ON
ON
ENTERENTERENTER
123
456
789
0
ENTERENTERENTER
ENTERENTERENTER
SETUP
SETUP
ENTERENTERENTER
ENTERENTERENTER
123
456
789
0
123
456
789
0
D
Parental Control limits the disc viewing that exceed your settings. (An incorrect password will be not acceptable.)
This feature prevents your children from viewing inappropriate materials.
arentalLeLe
PParental
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.
vels
vels
Follow steps 1 to 3 in the “CUSTOM Menu” section on page 14.
To exit
4
Enter your desired four-
4
digit password (except
for 4737).
5
Select “PARENTAL
5
LEVEL”.
6
Select the
6
desired level.
or
or
7
7
the menu
PARENTAL menu
CONTROL LEVELS
• ALL: All parental locks are cancelled.
• Level 8: DVD softwares of any grades (adult/general/children) can be played back.
• Levels 7 to 2: Only DVD softwares intended for general use and children can be played
If you have set a password already,
or
enter the current four-digit
password.
o Chang
Functions
TTo Chang
e the P
e the P
asswworor
ass
• Level 1: Only DVD softwares intended for children can be played back, with those
TIPS FOR LEVELS
• 7 [NC-17]: No one under 17 admitted
• 6 [R]: Restricted; under 17 requires accompanying parent or adult guardian
• 4 [PG13]: Unsuitable for children under 13
• 3 [PG]: Parental Guidance suggested
• 1 [G]: General Audience
Hint
Hint
• DVD-Video discs may not respond to the parental lock settings. Make sure this function
works with your DVD-Video discs.
d f
or P
d f
arental Contr
or P
arental Contr
You can change your password for parental controls. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 14.
4
4
Enter your desired fourdigit password (except
5
Select “PASSWORD
5
CHANGE”.
for 4737).
or
back.
intended for adult and general use prohibited.
ols
ols
6
Enter your new
6
four-digit password
(except for 4737).
7
7
To exit
the menu
PARENTAL menu
E
You can change the other functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 14.
4
4
OTHERS menu
OTHERS Setting
Select the desired item.
or
5
5
ANGLE ICON:
(Default: ON)
Set to “ON” to show the angle icon when multiple camera
angles are available during DVD playback.
AUTO POWER OFF:
(Default: ON)
Set to “ON” to turn this unit off automatically after
30 minutes of no use.
–16–
Hint
Hint
•
Record the password in
case you forget it.
• I
f you forget the pass-
word, press [4], [7], [3],
[7] at step [4], then enter
your new password.
•
Password will be cleared
and parental levels will be
set to “ALL”.
6 To exit the menu
6
EN
Reset to the Default Setting (except for PARENTAL Setting)
SETUP
QUICK
CUSTOM
INITIALIZE
SETUP INITIALIZE
Initialize?
NO
YES
SETUP
SETUP
SETUP
QUICK
CUSTOM
INITIALIZE
STOP
ENTERENTERENTER
ENTERENTERENTER
1
1
2
2
or or
3
3
4
4
To exit
the menu
Select “INITIALIZE”.
<SETUP MENU>
Select “YES”.
Press
twice.
Hint
Hint
•
When you cancel
to initialize at step
[3], select “NO”.
Information
Troubleshooting Guide
If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit consulting the following checklist.
Problem Solution
No power –Check if the AC power cord is properly connected.
No sound or picture –Check if the TV is switched on.
Distorted picture –Sometimes a small amount of picture distortion may appear.
Completely distorted picture or –Connect the unit directly to the TV.
black/white picture with DVD –Make sure the disc is compatible with the unit.
No sound or distorted sound –Adjust the volume.
No audio at digital output –Check the digital connections.
No DTS audio is output –This unit does not support DTS audio.
Picture freezes momentarily –Check the disc for fingerprints/scratches and
during playback clean with a soft cloth wiping from center to edge.
–
Unplug the outlet once, and wait for 5-10seconds and then plug it in again.
–Check the video connection.
–Check the VIDEO/AUDIO cable connections to the TV.
(See Connection to a TV.)
This is not a malfunction.
–Connect the unit directly to the TV.
–Check that the speakers are connected correctly.
–Check if the audio format of the selected audio language matches
your receiver capabilities.
–This is not a malfunction.
Disc can’t be played –Clean the disc.
–Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
–Cancel the parental lock or change the control level.
–Insert a correct disc that plays on this unit.
–Handle a disc with special care so that it does not have fingerprints,
scratches, or dusts on its surface.
No return to start-up screen when –Reset the unit by switching the unit off, then on again.
disc is removed
The unit does not respond to –
Aim the remote control directly at the sensor on the front of the unit.
the remote control –Reduce the distance to the unit.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
–Tune your radio to an empty AM station so that you hear a lot of
noises. Then, turn the volume up. If you hear some signal sound
from the radio by pressing buttons on the remote control, the
remote control is working.
Buttons do not work or the unit stops –To completely reset the unit, unplug the AC
responding cord from the AC outlet for 5-10 seconds.
The unit does not respond to some –Operations may not be permitted by the disc.
operating commands during playback Refer to the instructions of the disc.
The unit cannot read
–Use a commonly available cleaning CD/DVD to
CDs/DVDs clean the lens before sending the unit for repair.
Angle does not switch –The angle cannot be switched for DVDs which do not contain
multiple angles. In some cases multiple angles are only recorded
for specific scenes.
Playback does not start when the title is selected –Check the “PARENTAL” setting.
The password for rating level has been forgotten –Enter the default password “4737”, then your forgotten password
will be cleared.
NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual
for more details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
–17–
EN
Information
Specifications
Output signal format:
NTSC color
Power source:
120 V AC +/- 10%, 60 Hz +/- 0.5%
Power consumption:
10 W (standby: 0.8 W)
Operating temperature:
41°F (5°C) to 104°F (40°C)
Dimensions:
W : 9 5/8” (245 mm)
H : 2” (52 mm)
D : 9 11/16” (246 mm)
Weight :
Approx 1.9 lbs (0.9 kg)
• Designs and specifications are subject
to change without notice.
• If there is a discrepancy between languages, the default language will be
English.
Language Code List
Language Code Language Code Language Code Language Code
Abkhazian 4748
Afar 4747
Afrikaans 4752
Albanian 6563
Amharic 4759
Arabic 4764
Armenian 5471
Assamese 4765
Aymara 4771
Azerbaijani 4772
Bashkir 4847
Basque 5167
Bengali;Bangla 4860
Bhutani 5072
Bihari 4854
Bislama 4855
Breton 4864
Bulgarian 4853
Burmese 5971
Byelorussian 4851
Cambodian 5759
Catalan 4947
Chinese [CHI] 7254
Corsican 4961
Croatian 5464
Czech 4965
Danish [DAN] 5047
Dutch [DUT] 6058
English [ENG] 5160
Esperanto 5161
Estonian 5166
Faroese 5261
Fiji 5256
Finnish [FIN] 5255
If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language
setting on page 13. If you choose any other languages, ‘---’ will be displayed instead. (the 3 letter language code is written in bracket.)
Information
A-B
C-E
F-H
French [FRE] 5264
Frisian 5271
Galician 5358
Georgian 5747
German [GER] 5051
Greek [GRE] 5158
Greenlandic 5758
Guarani 5360
Gujarati 5367
Hausa 5447
Hebrew 5569
Hindi 5455
Hungarian [HUN] 5467
Icelandic [ICE] 5565
Indonesian 5560
Interlingua 5547
Interlingue 5551
Inupiak 5557
Irish [IRI] 5347
Italian [ITA] 5566
Japanese [JPN] 5647
Javanese 5669
Kannada 5760
Kashmiri 5765
Kazakh 5757
Kinyarwanda 6469
Kirghiz 5771
Kirundi 6460
Korean [KOR] 5761
Kurdish 5767
Laothian 5861
Latin 5847
Latvian;Lettish 5868
Lingala 5860
Lithuanian 5866
I-K
L-N
Macedonian 5957
Malagasy 5953
Malay 5965
Malayalam 5958
Maltese 5966
Maori 5955
Marathi 5964
Moldavian 5961
Mongolian 5960
Nauru 6047
Nepali 6051
Norwegian [NOR] 6061
Occitan 6149
Oriya 6164
Oromo(Afan) 6159
Panjabi 6247
Pashto;Pushto 6265
Persian 5247
Polish 6258
Por tuguese [POR] 6266
Quechua 6367
Rhaeto-Romance 6459
Romanian [RUM] 6461
Russian [RUS] 6467
Samoan 6559
Sangho 6553
Sanskrit 6547
Scots Gaelic 5350
Serbian 6564
Serbo-Croatian 6554
Sesotho 6566
Setswana 6660
Shona 6560
Sindhi 6550
Singhalese 6555
O-R
S
Siswat 6565
Slovak 6557
Slovenian 6558
Somali 6561
Spanish [SPA] 5165
Sundanese 6567
Swahili 6569
Swedish [SWE] 6568
Tagalog 6658
Tajik 6653
Tamil 6647
Tatar 6666
Telugu 6651
Thai 6654
Tibetan 4861
Tigrinya 6655
Tonga 6661
Tsonga 6665
Tu rkish [TUR] 6664
Tu rkmen 6657
Tw i 6669
Ukrainian 6757
Urdu 6764
Uzbek 6772
Vietnamese 6855
Volapuk 6861
Welsh 4971
Wolof 6961
Xhosa 7054
Yiddish 5655
Yo r uba 7161
Zulu 7267
T
U-Z
Limited Warranty
FUNAI CORP. will repair this MAGNAVOX product, free of charge in
the USA in the event of defect in materials or workmanship as follows:
DURATION:
PA RTS:
LABOR: FUNAI CORP. will provide the labor without charge for
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required
together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the
product are altered, replaced, defaced, missing or if service was
attempted by an unauthorized service center. This MAGNAVOX
Limited warranty does not apply to any product not purchased and
used in the United States.
This product is produced for home use and this warranty only covers
failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment,
or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident,
misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or
office use of this product or damage which results from fire, flood,
lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC
PA RTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL
FUNAI CORP. will provide parts to replace defective
parts without charge for one (1) year from the date of
original retail purchase. Certain parts are excluded
from this warranty.
a period of ninety (90) days from the date of original
retail purchase.
–18–
IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR
CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST
BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO A
FUNAI AUTHORIZED SERVICE CENTER.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO
STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU
ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF
THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN
OF THIS PRODUCT WITHOUT PRIOR NOTICE.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at:
FUNAI CORPORATION
Customer Service
Tel :1-800-605-8610
http://www.funai-corp.com
19900 Van Ness Avenue, Torrance, CA 90501
EN
STANDBY–ON
AUDIO
SUBTITLE
ANGLE
REPEAT
CLEAR
A-B
PAUSE
SLOW
SKIP
OPEN/CLOSE
DISPLAY
SEARCH
MODE
123
456
789
0 +10
PLAY
REV FWD
STOP
Español
CDCDCDDVD-V
DVD-V
SETUP
SETUP QUICK
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
BITSTREAM
ENTERENTERENTER
ENTERENTERENTER
ENTERENTERENTER
• Para encender o apagar la
unidad.
• Para encender o apagar la
unidad.
• Para mostrar el modo de
disco actual.
• Para mostrar el modo de
disco actual.
• Para abrir o cerrar la bandeja
del disco.
• Para abrir o cerrar la bandeja
del disco.
• Para hacer una pausa en la
reproducción del disco.
• Para empezar la
reproducción del disco.
• Para empezar la
reproducción del disco.
• Para seleccionar
directamente el capítulo o
título.
• Para seleccionar
directamente la canción.
• Para seleccionar los ángulos
de cámara en un disco.
• Para seleccionar subtítulos
en un disco.
• Para seleccionar idiomas de
audio en un disco.
•
Para seleccionar ESTÉREO
L-ch o R-ch.
• Para repetir entre su punto A
y B seleccionado.
•
Para repetir entre su punto A y B
seleccionado.
• Para reproducir
repetidamente un capítulo o
título.
• Para reproducir repetidamente
una canción o disco
.
• Para activar/desactivar el
nivel del negro.
•
Para disponer el orden de reproducción
o la reproducción aleatoria.
• Para llamar el Menú en un
disco.
• Para llamar el menú inicial
en un disco.
• Para ampliar la imagen de
vídeo en DVD.(x2/x4)
• Para activar/desactivar el
ambiental virtual.
• Para activar/desactivar el
ambiental virtual.
• Para volver a la operación
anterior en el menú.
• Para volver a la operación
anterior en el menú.
• Para buscar un capítulo, título
o tiempo.
• Para colocar o buscar los
marcadores.
• Para buscar una canción.
• Para buscar el tiempo.
•
Para colocar o buscar los
marcadores.
• Para borrar los marcadores.
• Para borrar los marcadores.
• Para eliminar el Nº de estado
en la entrada de programa.
• Para borrar los números mal
entrados.
• Para borrar el punto para la
repetición A-B.
• Para borrar los números mal
entrados.
• Para borrar el punto para la
repetición A-B.
•
Para buscar en avance/
retroceso por un disco.
•
Para empezar la reproducción
en avance lento/retroceso
durante el modo de pausa.
• Para buscar en avance/
retroceso por un disco.
•
Para avanzar la reproducción un cuadro
cada vez.
•
Para hacer una pausa en la reproducción.
• Para parar la reproducción. • Para parar la reproducción.
• Para saltar capítulos. • Para saltar canciones.
• Para llamar el menú de
ajustes de DVD.
• Para llamar el menú de
ajustes de DVD.
• Para mover el cursor y
determinar la posición.
• Para mover el cursor y
determinar la posición.
STANDBY–ON
DISPLAY
MENU
TOP MENU
ZOOM
SUBTITLE
MODE
ANGLE
SEARCH
MODE
REPEAT
A-B
AUDIO
CLEAR
123
456
789
0
+1 0
PAUSE
PLAY
STOP
SETUP
DVD-V
DVD-V
CD
CD
Botón
(Orden alfabético)
Disco
ENTER
RETURN
REV FWD
OPEN/CLOSE
SKIP
SETUP
QUICK
CUSTOM
INITIALIZE
SETUP
STOP
STANDBY–ON
STOP
STANDBY–ON
OPEN/CLOSE
PLAY
Conexiones
1
Si su televisor tiene entradas
de AUDIO/VIDEO vea la sección “Connection to a TV” en la
página 6 en el Manual de
Manejo. En caso contrario, vea
la sección “Before Using Your
Unit” en la página del frente en
el Manual de Manejo.
Instalación de las pilas
2
en el control remoto
1
3
2
Para cambiar el idioma
3
en la pantalla
1
1
✄
2
2
3
3
4 Para salir del menú
4
Confirme que ha seleccionado “QUICK”.
Confirme que ha seleccionado
“PLAYER MENU”.
Seleccione el idioma deseado para
las indicaciones en la pantalla.
PLAYER MENU
o
ENGLISH
FRANÇAIS
ESPAÑOL
Reproducción
4
Antes.
¡
Encienda el televisor, amplificador y
otros equipos conectados a esta
unidad. Asegúrese que el televisor y el
sintonizador de audio (de venta en los
comercios) están en el canal correcto.
1
1
1
3
3
Control remoto
5
1
4
4
–19–
1
1
3
3
2
2
4
4
Ponga un
disco con
la etiqueta
hacia
arriba.
Español
ES
STANDBY–ON
AUDIO
SUBTITLE
ANGLE
REPEAT
CLEAR
A-B
PAUSE
SLOW
SKIP
OPEN/CLOSE
DISPLAY
SEARCH
MODE
123
456
789
0 +10
PLAY
REV FWD
STOP
Quick Use Guide
SETUP QUICK
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
BITSTREAM
• To play a chapter or title
repeatedly.
• To play a track or disc
repeatedly.
• To display the current disc
mode.
• To display the current disc
mode.
• To open or close the disc
tray.
• To open or close the disc
tray.
• To select chapter or title
directly.
• To select track directly.
• To select camera angles on
a disc.
• To select subtitles on a disc.
• To select audio languages on
a disc.
• To select STEREO,
L-ch or R-ch.
• To repeat between your
chosen point A and B.
• To repeat between your
chosen point A and B.
• To return to the previous
operation in menu.
• To return to the previous
operation in menu.
• To search track.
• To search time.
• To set or search the
markers.
• To set black level on/off.
• To set virtual surround on/off.
• To arrange the playing
order or play randomly.
• To set virtual surround on/off.
• To call up the Menu
on a disc.
• To call up the Top Menu
on a disc.
• To magnify part of a picture.
(x2/x4)
• To search chapter, title or time.
• To set or search the
markers.
• To call up the DVD setup
menu.
• To clear the markers.
• To cancel the point for A-B
repeat.
• To cancel the point for A-B
repeat.
• To clear the markers.
• To remove status number
in program input.
• To clear the numbers
entered incorrectly.
• To clear the numbers
entered incorrectly.
• To search forward/backward
through a disc.
• To begin slow forward
/reverse playback during
the pause mode.
• To search forward/backward
through a disc.
• To advance playback
one frame at a time.
• To pause disc playback.
• To pause disc playback.
• To stop playback. • To stop playback.
• To turn the unit on or off.
• To turn the unit on or off.
• To begin disc playback. • To begin disc playback.
• To skip chapters. • To skip tracks.
• To move the cursor and
determine its position.
• To move the cursor and
determine its position.
STANDBY–ON
DISPLAY
MENU
TOP MENU
ZOOM
SUBTITLE
MODE
ANGLE
SEARCH
MODE
REPEAT
A-B
AUDIO
CLEAR
123
456
789
0
+1 0
PAUSE
PLAY
STOP
SETUP
DVD-V
DVD-V
CD
CD
Button
(Alphabetical order)
Disc
ENTER
RETURN
REV FWD
OPEN/CLOSE
SKIP
• To call up the DVD setup
menu.
SETUP
QUICK
CUSTOM
INITIALIZE
SETUP
ENTERENTERENTER
ENTERENTERENTER
ENTERENTERENTER
SETUP
STOP
STANDBY–ON
CDCDCDDVD-V
DVD-V
STOP
STANDBY–ON
OPEN/CLOSE
PLAY
1
If your TV has AUDIO/VIDEO
input jacks, see the section
“Connection to a TV” on page
6 of the Owner’s Manual. If not,
see the section “Before using
your Unit” on the front page of
the Owner’s Manual.
2
1
3
1
1
2
2
Confirm that “PLAYER MENU” is selected.
3
3
4 To exit the menu
4
Connections
Installing the Batteries
for the Remote Control
2
To Change the OnScreen Language
Confirm that “QUICK” is
selected.
Select the desired language
for the On-Screen Display.
or
3
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
Playback
4
Before:
¡
Tu rn on the TV, amplifier and any other equipments which are connected to this unit. Make
sure the TV and audio receiver (commercially
available) are set to the correct channel.
1
1
1
3
3
Remote Control
5
1
4
4
1
1
3
3
2
2
4
4
Insert a
disc with
label
facing up.
✄
Printed in China
1VMN21627 / E6151UD ★★★★★
Loading...