Funai MFV210D User Manual

OWNER'S MANUAL

VIDEO CASSETTE PLAYER

If you need additional operating assistance after reading this owner's manual or to order replacement accessories, please call TOLL FREE : 1-800-242-7158. http://www.funai-corp.com

MFV210D

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear of the cabinet.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFEGUARDS

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

ANTENNA LEAD WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

S2898A

1. Read Instructions- All the safety and operating instructions should be read before the appliance is operated.

2. Retain Instructions- The safety and operating instructions should be retained for future reference.

3. Heed Warnings- All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow Instructions- All operating and use instructions should be followed.

5.Cleaning- Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CA TV con v erter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6. Attachments- Do not use attachments not recommended by the video product manufacturer as they may cause hazards.

7.Water and Moisture- Do not use this video product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. Accessories- Do not place this video product on an unstable cart, stand, tripod, bracket, or table.The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance.Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer , or sold with the video product.Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.An appliance and cart combination should be moved with care. Quick stops, excessive f orce, and une v en surf aces ma y cause the appliance and cart combination to overturn.

9.Ventilation- Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered.The openings should never be blocked b y placing the video product on a bed, sofa, rug, or other similar surface.This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to .

10. Power Sources-This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, ref er to the operating instructions.

11. Grounding or Polarization-This video product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).This plug will fit into the power outlet only one way.This is a safety feature.If you are unable to insert the plug fully into the outlet, try reversing the plug.If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.Do not defeat the safety purpose of the polarized plug.

12. Power Cord Protection-Power supply cords should be routed so that

13. Outdoor Antenna Grounding- If an outside antenna or cable system is

they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.Article 810 of the National Electrical Code, ANSI/NFP A No .70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.(Fig. A)

14. Lightning- For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.This will prevent damage to the video product due to lightning and power-line surges.

15. Power Lines- An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16. Overloading- Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry- Never push objects of any kind into this video product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.Never spill liquid of any kind on the video product.

18. Servicing- Do not attempt to service this video product yourself as opening or removing covers may expose y ou to dangerous voltage or other hazards.Refer all servicing to qualified service personnel.

19. Damage Requiring Service- Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the video product. c. If the video product has been exposed to rain or water. d. If the video product does not operate normally by following the operating

instructions.Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation.

e. If the video product has been dropped or damaged in any way.

f. When the video product exhibits a distinct change in performance-this

indicates a need for service.

20. Replacement Parts- When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

21. Safety Check- Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition.

22. Heat- This video product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

IMPORT ANT

SAFEGUARDS

PRECAUTIONS

DESCRIPTION

OF CONTROLS

DISPLA Y

STATUS

DISPLA Y

FOR USE

PREP ARATION

FUNCTION

PLA YBACK

GUIDE

TROUBLESHOOTING

SPECIFICATIONS

MAINTENANCE

WARRANTY

EN ESPAÑOL

INSTRUCCIONES

INSTALL LOCATION

For safety and optimum performance of your VCP:

• Install the VCP in a horizontal and stable position. Do not place anything directly on top of the VCP. Do not place the VCP directly on top of the TV.

• Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for

PRECAUTIONS

proper heat dissipation. Do not block the ventilation holes on the sides of the VCP. Avoid locations subject to strong vibration or strong magnetic fields.

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting

it from AC wall outlet.Grasp it by the plug.

• If, by accident, water is spilled on your VCP, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.

• Do not put your fingers or objects into the VCP cassette holder.

PRECAUTIONS

A NOTE ABOUT RECYCLING

This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated

but disposed of in accordance with your local regulations concerning chemical wastes.

Note to the Cable TV System Installer:

This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding – in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.

WARNING

Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.

MOISTURE CONDENSATION WARNING

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Do not use the VCP at least for 2 hours until its inside is dry.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

– 2 –

0:12:34

PLAY MODE REWIND MODE FAST FORWARD MODE EJECT MODE STOP MODE

0:12:34 0:12:34

Front Panel

POWER

AUTO

REPEAT

PICTURE SELECT

POWER

AUTO REPEAT

REW F.FWD PLAY

STOP/EJECT

9 6 8 7 10 11 3 5 4 2 1

Remote Control

POWER

TRACKING

DISPLAY

REW

PLAY

STOP

F.FWD

EJECT

COUNTER

RESET

PICTURE

SELECT

AUTO

REPEAT

3 4

STILL

Rear Panel

ANT OUT

ANT IN

AUDIO

OUTPUT

CH3 CH4

VIDEO

OUTPUT

DC 13. 2V

17 14

DESCRIPTION OF CONTROLS

To insert the batteries

1. Cassette Compartment

2. STOP/EJECT button

3. REW button

4. PLAY button

5. F.FWD button

6. AUTO REPEAT button

12. AC Power Cord

13. AUDIO OUT jack

14. ANT. IN jack

15.VIDEO OUT jack

7. PICTURE SELECT

8. Remote Sensor

9. POWER button

10. POWER indicator

11. AUTO REPEAT indicator

16. CH3/CH4 selector switch

17. ANT. OUT jack

18.

DC13.2V (12V) supply jack

1. POWER button

2. DISPLAY button

3. REW button

4. STOP button

5. STILL button

6. F.FWD button

7. PLAY button

8. COUNTER RESET button

9. AUTO REPEAT button

10. PICTURE SELECT button

11.TRACKING buttons

12. EJECT button

Install two AA batteries matching the polarity indicated inside the battery compartment.

DESCRIPTION

OF CONTROLS

DISPLA Y

STATUS

DISPLA Y

DISPLAY

Press [DISPLAY] to display the tape status, real time tape counter, and other infor mation on the TV screen. (only on the remote control) Each time you press this button, TV screen will change as shown.

Press

once

Press once

5 SECONDS

– 3 –

STATUS DISPLAY

When you press the function buttons or turn on the VCP, the status display will appear on the TV screen for 5 seconds.

+ 6 hidden pages