Fulgor Milano F6PGR366S2, F4PGR304S1 User Manual
30”-36” Full Gas Ranges 600 SERIES
lb /
inch
Kg /
mm
32"1/4
820
lb /
inch
Kg /
mm
H
32"1/4
820
min
30”
(76,2)
To botton of
ventilation hood
min
(15,2)
min 18”
(45,7)
6”
C
to Combustibles
A
min
48”
(122)
Minimum
max
(33)
13”
min 18”
(45,7)
min
6”
(15,2)
9 1/4”
(23,6)
3”
(7,6)
3/8”
(1)
30”
(76,3)
27 3/4”
(70,6)
1”
(2,6)
7”
(17,9)
Weight & Dimensions
PACKAGING 30”
GROSS WEIGHT
DIMENSION
PACKAGING 36”
GROSS WEIGHT
DIMENSION
322 lb 146 Kg
33"
W
45"3/4
D
H
377 lb 171 Kg
W
39"
D
45"3/4
840
1162
990
1162
3”
2” (5,1) max.
protusion from wall
for gas or electrical supply
OPENING WIDTH
Range 30" 30" (76,2) 6" (15,2)
Range 36" 36" (91,4) 7" (17,8)
Note: Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and not certied.
Clearances to non-combustible materials must conform with local codes or, in the absence of local codes,
with the National Fuel Gas Code, ANSI Z223.1/NFPA 54.
A & C B
SHADED AREA:
The surface of the entire back wall above the range and below the hood
must be covered with a noncombustible material.
*Consult local code for exact location requirements.
GAS ELECTRIC
B
( 9 )
B
min
4 3/4”
(12,3)
*Suggested
location of
utilities
Minimum clearances:
Above cooking surface (above 36” [91.4 cm])
• Sides - 6” (15.2 cm)
• Within 6” (15.2 cm) side clearance, wall cabinets no deeper than 13” (33.0 cm) must be minimum
18” (45.7 cm) above cooking surface
• Wall cabinets directly above product must be a minimum of 48” (122 cm) above cooking surface.
• Rear - 0” with 9 ” backguard; 0” with non-combustible rear wall.
Below cooking surface (36” [91.4 cm] and below)
• Install with zero clearance between adjacent combustible construction below the cooking surface and the back and sides of
the appliance
ADDITIONAL CLEARANCES:
For island installation, maintain 2-½ in. minimum from
cutout to back edge of countertop and 3 in. minimum
from cutout to side edges of countertop (see top view).
For island installation, 12" (305) minimum clearance
back of range to combustible rear wall above countertop.
The island installation is not part of the ANSI Z21.1
scope and not certied.
min
(7,6)
3”
Back
min 2-½” (6,3)
min
(7,6)
1 3/8”
3 3/8”
TO
(3,5)
(8,5)
25-3/4”
(65,4)
27-1/2”
(69,8)
48 1/8”
(122,2)
9 1/4”
3”
or
(23,6) [OPTIONAL]
29-3/4”
(75,8)
Max 37-1/4”
(94,7)
Min 35-3/8”
(89,8)
3”
Max 38-1/2”
Min 36-3/8”
27-1/2”
(69,8)
(97,7)
(92,5)
(7,6)
Max 37-1/4”
(94,7)
Min 35-3/8”
(89,8)
Max 38-1/2”
Min 36-3/8”
27-1/2”
(69,8)
35-3/4”
(91,0)
(97,7)
(92,5)
3”
(7,6)
9 1/4”
or
(23,6) [OPTIONAL]
Loading...