Fujitsu fi-5015 Getting Started

Getting Started

Getting Started

fi

-

5015C Image Scanner

fi

-

5015C

Image Scanner

P3PC-1582-06EN

Thank you for purchasing the fi-5015C Color Scanner.
This document describes how to use fi-5015C and basic operation methods. Before you start using fi-5015C be sure to
thoroughly read this manual to ensure correct use.

The "Operator’s Guide" stored on the Setup DVD Rom provides useful and detailed information on Operations when
you would like to use advanced features, Daily Care for maintenance of the scanner, and Replacing Consumables to
maintain conditions for smooth scanning. Please also read the Operator’s Guide for further information.

Microsoft, Windows, Windows Server, Windows Vista, and SharePoint are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.

ISIS is a registered trademark or trademark of EMC Corporation in the United States.

Other company names and product names are the registered trademarks or trademarks of the respective companies.

March, 2013

© PFU LIMITED 2006-2013

How Trademarks Are Indicated In
This Manual

References to operating systems (OS) are
indicated as follows:

Windows 2000

Windows XP

Windows
Server 2003

Windows Vista

Windows® 2000 Professional
operating system

Windows® XP Home Edition
operating system,

®

Windows
operating system (32/64-bit)

Windows Server® 2003,
Standard Edition (32/64-bit),

Windows Server
Standard Edition (32/64-bit)

Windows Vista® Home Basic
operating system (32/64-bit),

Windows Vista
operating system (32/64-bit),

Windows Vista
operating system (32/64-bit),

Windows Vista
operating system (32/64-bit),

Windows Vista
operating system (32/64-bit)

XP Professional

®

2003 R2,

®

Home Premium

®

Business

®

Enterprise

®

Ultimate

Windows
Server 2008

Windows 7

Windows
Server 2012

Windows 8

Where there is no distinction between the different
versions of the above operating system, the
general term "Windows" is used.

Windows Server® 2008
Standard (32/64-bit),

®

Windows Server
Standard

Windows® 7 Home Premium
operating system (32/64-bit),

Windows
operating system (32/64-bit),

Windows
operating system (32/64-bit),

Windows
system (32/64-bit)

Windows Server® 2012
Standard (64-bit)

Windows® 8 operating system
(32/64-bit),

Windows
system (32/64-bit),

Windows
operating system (32/64-bit)

®

®

®

®

®

2008 R2

7 Professional

7 Enterprise

7 Ultimate operating

8 Pro operating

8 Enterprise

1

About Maintenance

WARNING

CAUTION

ATTENTION

HINT

ATTENTION

Screen Examples In This Manual

The user must not perform repairs on this scanner.
Contact the store where you purchased the scanner
or an authorized FUJITSU Image Scanner service
provider to make repairs to this product.

Safety Precautions

The attached "Safety Precautions" manual
describes important details for users to use this
product safely and correctly. Read the Safety
Precautions thoroughly before you start using this
product.

Warning Indications Used In This
Manual

This indication alerts operators to an
operation that, if not strictly
observed, may result in severe injury
or death.

This indication alerts operators to an
operation that, if not strictly
observed, may result in safety
hazards to personnel or damage to
equipment.

The screen examples in this manual are subject to
change without notice in the interest of product
improvement. If the actual displayed screen
differs from the screen examples in this manual,
operate by following the actual displayed screen
while referring to the User's Manual of the
scanner application you are using.
The screen examples used in this manual are of
the TWAIN driver, ISIS driver, and ScandAll PRO
(image scanning application).

Symbols Used In This Manual

This symbol alerts operators to particularly
important information. Be sure to read this
information.

This symbol alerts operators to helpful
advice regarding operation.

Warning Label

The glass surface inside the ADF becomes hot
during the operation. Be careful not to touch the
glass surface inside the ADF.

Do NOT remove, stain or scratch the
warning labels from the scanner.

2

Chapter1 PREPARING THE SCANNER

1.1 Checking the Contents of the Scanner Package

Make sure that all items shown below are included in the package.
If any parts are missing or defective, contact your scanner dealer or an authorized FUJITSU scanner service provider.
Handle the scanner and accessories with care.

Scanner (x1)

ADF paper chute (x1)

Extension (x1)

Document stopper
(x1)

AC cable
(The contents may vary depending on the country and the
model purchased.)

AC adapter (x1)

USB cable (x1)

SETUP DVD-ROM (x1)

Safety Precautions (x1)

PAD-ASSY (x1)

3

Chapter2

ATTENTION

INSTALLATION OF THE SCANNER

2.1 Installing the Scanner Application

For scanning documents with this scanner, both scanner driver and image capturing application software (called "appli­cation" hereafter) must be installed on your PC.
The following scanner drivers and applications are provided:

• Scanner Driver:

TWAIN Scanner Driver
ISIS Scanner Driver

• Scanning application:

ScandAll PRO (For TWAIN driver/ISIS driver)

Install the appropriate scanner driver for the application you will use. The following sections describe installation of
each driver and application.

Please install the scanner driver before connecting the scanner to your PC.
If you connect the scanner before installing the scanner driver, the scanner will not operate correctly.
If you have connected the scanner beforehand, the "Found New Hardware Wizard" screen appears (this screen
might differ slightly according to the used OS) . On this screen, click the [Cancel] button to close the Wizard
screen and install the scanner driver first.

4

For TWAIN Scanner Driver

■ Preparation

ATTENTION

ATTENTION

ATTENTION

ATTENTION

ATTENTION

Confirm the following items before installing the appli­cation.

• Take out the Setup DVD-ROM from its
package, but do not insert the Setup DVD­ROM into the DVD driver yet.

• Uninstall any older version of TWAIN driver
if already installed.

3. Click [INSTALL], and then click [TWAIN
Driver].

Uninstall [Scanner Utility for Microsoft Win­dows] from [Add/Remove Programs] of the
control panel.

■ Installing the TWAIN Scanner
Driver

Windows XP screenshots are used in this
section as examples. The windows and
operations may slightly vary depending on

your OS

1. Turn on your PC and log on to Windows.

Be sure to log on as a user with "Adminis­trator" privileges.

.

4. Error Recovery Guide Installation window
appears.
Error Recovery Guide is a software that dis­plays troubleshooting information on screen
when any scanner error occurs. Although this
software’s installation is highly recommended,
it can be installed later if you do not install it in
this step.

When you select [Yes] for installing the
Error Recovery Guide, [Choose Setup
Language] window appears. Select a lan­guage and follow the instructions on the
window. Error Recovery Guide will auto­matically continue finishing its installation.
Please wait until the installation of TWAIN
driver automatically starts.

5. Select a language used for installation on
[Choose Setup Language] window and click
[Next].

2. Insert the Setup DVD-ROM into the DVD drive.

⇒ <SETUP DICS START UP SCREEN> appears.

This screen may not appear when the
"Autoplay" setting of your PC is OFF. In
this case, run "AutoPlayer.exe" in this
DVD-ROM directly from the "Explorer" or
"My Computer".

6. Follow the instructions on the window to install
the application.

7. When the [InstallShield Wizard Complete] win­dow appears, click [Finish].

Your computer will be restarted.
Do not remove the Setup DVD-ROM from the DVD
drive until your PC has completely restarted.
Installation of the scanner driver is completed.

5

For ISIS Scanner Driver

ATTENTION

Depending on the operating system you are

ATTENTION

HINT

ATTENTION

ATTENTION

ATTENTION

using, you may need to do the following.

Windows 2000:
If you see the [Digital Signature not
Found] dialog box, click the [Yes] button.
Windows Vista:
If you see the [Found New Hardware] dia­log box, select [Locate and install driver
software], and then in the [User Account
Control] dialog box, click the [Continue]
button, if it is displayed.

■ Installing ScandAll PRO/Scan to
Microsoft SharePoint

ScandAll PRO is software for scanning images, which is
in compliance with both TWAN/ISIS standards. Using
TWAIN or ISIS together with ScandAll PRO allows you
to create document images.
Scan to Microsoft SharePoint is an application that
allows you to upload your files easily from ScandAll
PRO to a SharePoint site. Can be installed together with
ScandAll PRO.

■ Preparation

Take out the Setup DVD-ROM from its package, but do
not insert the Setup DVD-ROM into the DVD drive yet.

■ Installing the ISIS Scanner Driver

Windows XP screenshots are used in this
section as examples. The windows and
operations may vary slightly depending on
your OS.

1. Press the power button to turn on the scanner.

2. Turn on your personal computer, and then log
on to Windows.

Be sure to log on as a user with "Adminis­trator" privileges.

Be sure to log on as a user with "Adminis­trator" privileges.

1. Insert the Setup DVD-ROM into the DVD drive.

⇒ <SETUP DICS START UP SCREEN> appears.

2. Click [INSTALL], and then click [ScandAll
PRO].

3. Select a language for the installation on
[Choose Setup Language] dialog box, and then
click the [Next] button.

4. Proceed with the installation, following the on­screen instructions.

5. When the [InstallShield Wizard Complete] dia­log box appears, click the [Finish] button.

For information about the features of Scan­dAll PRO, refer to Help topics in ScandAll
PRO.

3. When the scanner is automatically detected,
[Found New Hardware Wizard] or [Add/
Remove Hardware Wizard] dialog box will
appear. Click the [Cancel] button to close the
Wizard dialog box.

4. Insert the "Setup DVD-ROM" into the DVD
drive.

⇒ <SETUP DICS START UP SCREEN> appears.

The [SETUP DICS START UP SCREEN]
may not appear if the "AutoPlay" setting is
set to off. In this case, find
"AutoPlayer.exe" in the DVD-ROM using
"Explore" or "My Computer" and execute
it.

6

5. Click [INSTALL], and then click [ISIS Driver].

Software Operation Panel

Error Recovery Guide

ATTENTION

ATTENTION

6. Error Recovery Guide Installation dialog box
appears.
Error Recovery Guide is an application with
which you can view on-screen information for
troubleshooting errors that may occur in the
scanner. This guide helps solve problems, so
select [Yes] to install it. You may also choose
to install it later.

Depending on the operating system you
are using, you may need to do the follow­ing.

Windows 2000:
If you see the [Digital Signature not
Found] dialog box, click [Yes].
Windows Vista:
If you see the [Found New Hardware] dia­log box, select [Locate and install driver
software], and then in the [User Account
Control] dialog box, click the [Continue]
button, if it is displayed.

You can configure settings related to scanning and man­age consumables using the Software Operation Panel. It
is installed together with TWAIN driver/ISIS driver.

After you select [Yes] for installing Error
Recovery Guide, the [Choose Setup Lan­guage] dialog box appears. Select a lan­guage and follow the on-screen
instructions. The Error Recovery Guide
dialog box is automatically displayed when
the installation is complete. Wait until the
installation of the ISIS starts.

7. Select a language for the installation on the
[Choose Setup Language] dialog box, and then
click the [Next] button.

8. Install the driver, following the on-screen
instructions.

9. When you see the [InstallShield Wizard Com­plete] dialog box, click the [Finish] button.

Your computer will restart and detect the scanner. Do
not remove the Setup DVD-ROM from the DVD drive
until your personal computer completely starts up again.

Error Recovery Guide is a software that displays trou­bleshooting information on screen if any scanner error
occurs.
If you did not install together the Error Recovery Guide
with the driver, please proceed with the procedures
given below for installing it.

1. Insert the Setup DVD-ROM into the DVD drive.

⇒ <SETUP DICS STARTUP SCREEN> appears.

2. Click [INSTALL].

3. Click [Error Recovery Guide] on the next
screen.

4. Select a language to use for the installation in
the <Choose Setup Language> window and
click [OK].

5. Install the application following the instructions
in the window.

6. When the [InstallShield Wizard Complete]
screen displays, click [Finish].

7

(Trial)

Image Processing Software Option

For details on the installation of the Image Processing

HINT

ATTENTION

ATTENTION

Software Option, refer to the "Image Processing Soft­ware Option USER’S GUIDE".

■

Uninstalling Supplied Programs

Follow the procedure below to uninstall supplied pro­grams.

• When uninstalling Image Processing Soft-

ware Option,

select "Image Processing Software Option"

• When uninstalling Software Operation

Panel,
select "Software Operation Panel".

5. Click the [Change/Remove] or [Remove] but­ton.

6. When the confirmation dialog box appears,
Click the [OK] or [Yes] button.

⇒ This executes the uninstallation.

Windows XP screenshots are used in this
section. The windows and operations may
slightly vary depending on your OS.

1. Start up your PC.

Be sure to log on as a user with "Adminis­trator" privileges.

2. Exit all currently running programs.

3. Select [Control Panel] - [Add or remove Pro­grams] from the [Start] menu.

⇒ This displays the "Add or remove Programs"

screen which displays a list of the currently
installed applications.

4. Select the application to uninstall.

• When uninstalling TWAIN scanner driver,

select "Scanner Utility for Microsoft Win­dows".

• When uninstalling ScandAll PRO,

select "Fujitsu ScandAll PRO". After ScandAll
PRO, you can also remove Scan to Microsoft
SharePoint.

• Microsoft SharePoint: [Scan to Microsoft

SharePoint]

• When uninstalling ISIS scanner driver,

select "ISIS Driver Bundle Installer for fi
Series Scanners".

• When uninstalling Error Recovery Guide,

select "Error Recovery Guide".

Screen displays may vary slightly accord­ing to the operation system (OS) you are
using. Follow the on screen instructions of
the OS.

Examples

In Windows 2000, the window and button
names described above are as follows:

• [Add or Remove Programs] -> [Add/

Remove Applications]

• The [Change/Remove] button -> The

[Add/Remove] button

In Windows Vista, the window and button
names described above are as follows:

• [Uninstall or Change a program] ->[Unin-

stall or Change]

8

2.2 Installing the Scanner

ADF paper chute

Extension

Document stopper

ATTENTION

HINT

Screw

After the computer has been restarted, connect the scan­ner.

1. Place the scanner at its installation site.

For details on the scanner's dimensions and
required installation space, refer to "fi-5015C
Operator’s Guide" "Appendix A Installation
Specifications" in the Setup DVD-ROM.

2. Unlock the shipping lock

The carrier unit inside the scanner is fixed in
place by the shipping lock to prevent the scanner
from becoming damaged during transportation
from factory.
After transporting and placing the scanner, release
the shipping lock.

5. Connect the AC adapter.

Use only the AC adapter provided by the
manufacturer.

1) Connect the AC cable to the AC adapter.

3. Installation of the ADF paper chute, Extension
and Document stopper.

Attach Extension to ADF paper chute, and then
mount it on the scanner; attach Document stopper
to the scanner.

2) Connect the AC adapter connector to the
scanner’s DC inlet.

3) Plug the AC cable into the outlet.

The Function Number Display and the LED
may flash for an instant when plugging the
AC cable into the outlet.

4. Connect the ADF cable to the ADF cable con­nector on the scanner, and secure it with
screws.

9

2.3 Connecting the Scanner to

ATTENTION

Your PC

Follow the procedure below to connect the USB cable.

1. Connect the USB interface cable to the USB
interface connector.

2. Connect the other end of the USB interface
cable to the PC.

2.4 Confirming Installation

This section explains how to check the operation of the
installed scanner driver by using ScandAll PRO.
Make sure that the scanner driver is installed properly,
following the procedure below.

■ Checking the Operation of the
Scanner Driver

1. Load the document on the scanner.

2. Launch ScandAll PRO.

From the [start] menu, select [All Programs] ->
[Fujitsu ScandAll PRO] -> [ScandAll PRO].

⇒ ScandAll PRO starts up.

3. In ScandAll PRO, select [Tool] on the menu,

and then select [Preferences].

• Be sure to use the USB cable which

comes as an accessory with this scan­ner. Correct operation with commercially
available cables is not guaranteed.

• When connecting to an USB hub, use

the first stage USB hub that is closest to
the computer. If you use the second or
later hub stages, the scanner may not
operate correctly.

• If you connect the scanner with USB 2.0,

it is required that the USB port and Hub
are compliant with USB 2.0. The scan­ning speed may slow down if it is con­nected with USB1.1.

3. Press the "I" side of the main power switch to
turn on the scanner.

4. Press the power button to turn ON the scanner.

Your scanner will be automatically detected.
For Windows 2000:
When [Digital Signature not Found] appears,
click [Yes].

⇒ The [Setup] dialog box appears.

4. On the [Scan] tab, select a driver.

To check the operation of TWAIN, select
[TWAIN].
To check the operation of ISIS, select [ISIS].

5. Click the [OK] button to close the [Setup] dialog
box.

6. In ScandAll PRO, select [Scan] on the menu,
and then select [Select Scanner].

7. Select a scanner in the displayed dialog box.

To use
Select [FUJITSU fi-5015C], and then click the
[Select] button.
To use
Select [Fujitsu fi-5015C] and then click the
[Select] button.

8. Select [Scan] on the menu, and then select
[Scan Settings].

TWAIN:

ISIS:

The installation of the scanner is completed.

10

9. In the [Scan Settings] dialog box, clear the

HINT

HINT

[Save to file] checkbox.

12. Click the [Scan] button.

When you are using TWAIN, you may see
the TWAIN Driver setup dialog box again. If
so, click the [Scan] button on the dialog
box.

⇒ The document is scanned and the scanned image

is displayed in the [ScandAll PRO] window.

If the scanned document image is displayed in the win­dow, it means that the scanner driver is installed prop­erly.

You only check the operation now, so you
do not have to save to file.

10. Click [Scanner Settings].

⇒ A setup dialog box appears for you to configure

scanner driver settings.

11. Configure scanner settings such as the resolu­tion and paper size.

To use TWAIN
On the dialog box below, configure scan settings,
and then click the [OK] button.

To use ISIS
On the dialog box below, configure scanning set­tings, and then click the [OK] button.

⇒ You are returned to the [Scan Settings] dialog

box.

11