DIGITAL CAMERA
X100F
New Features Guide
Version 2.00
Features added or changed as a result of rmware updates may no longer match the
descriptions in the documentation supplied with this product. Visit our website for
information on the updates available for di erent products:
http://www.fujifilm.com/support/digital_cameras/software
BL00004959-200
EN
Contents
Contents
No.
Description
X100F
See
Ver.
1
6969EN-1
2.00
2
3
122
EN-2
4
126
EN-2
5
142
EN-3
6
144
EN-3
The following changes or additions have been made to features described in the X100F owner’s manual.
No.
1 The focus stick can be used to change focus areas when the display is zoomed in during MF assist.
The focus stick can be used to change focus areas when the display is zoomed in during checking
2
focus.
An OFF option has been added to D BUTTON/DIAL SETTING> CONTROL RING SETTING in the
3
setup menu.
4
A D CONNECTION SETTING> PC CONNECTION MODE item has been added to the setup menu.
In addition to the instax SHARE printers listed in “Accessories from FUJIFILM”, the camera now sup-
5
ports the SP-3.
6 Third-party studio ash commanders compatible with the FUJIFILM ash system can now be used.
Description
X100F PP
122
126
142
144
See PP
EN-1
EN-2
EN-2
EN-3
EN-3
Ver.
2.00
ENGLISH
Changes and Additions
Changes and Additions
Focus Mode
Checking Focus
Focus Mode
X100F Owner’s Manual: P 69
Checking Focus
To zoom in on the current focus area for precise focus, press the
center of the rear command dial. Press the center of the rear command dial again to cancel zoom. In manual focus mode, zoom can
be adjusted by rotating the rear command dial when STANDARD
or FOCUS PEAK HIGHLIGHT is selected for G AF/MF SETTING>
M M
MF ASSIST, while if ON is selected for G AF/MF SETTING> FOCUS
CHECK, the camera will automatically zoom in on the selected focus area when the focus ring is rotated. Focus
area selection using the focus stick is available during focus zoom. Focus zoom is not available in focus mode
C or when G AF/MF SETTING> PRE-AF is on or an option other than r SINGLE POINT is selected for AF
MODE.
EN-1ENGLISH
Changes and Additions
CONTROL RING SETTING
PC CONNECTION MODE
Option
Description
USB CARD READER
USB RAW CONV./BACKUP RESTORE
■ D BUTTON/DIAL SETTING
X100F Owner’s Manual: P 122
CONTROL RING SETTING
Set functions assigned to the control ring.
Options: DEFAULT/WHITE BALANCE/FILM SIMULATION/DIGITAL TELE-CONV./OFF
■ D CONNECTION SETTING
X100F Owner’s Manual: P 126
PC CONNECTION MODE
Adjust settings for connection to a computer.
Option
USB CARD READER
USB RAW CONV./BACKUP RESTORE
Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. The camera functions normally when not connected.
Connecting the camera to a computer via USB automatically enables USB RAW conversion/
backup restore mode. The camera functions normally when not connected.
• USB RAW CONV. (requires FUJIFILM X RAW STUDIO): Use the camera’s image processing
engine to rapidly convert RAW les to high-quality JPEG images.
• BACKUP RESTORE (requires FUJIFILM X Acquire): Save and load camera settings. Recon-
gure the camera in an instant or share settings with other cameras of the same type.
Description
EN-2 ENGLISH
Accessories from FUJIFILM
Accessories from FUJIFILM
instax SHARE printers
Using Shoe-Mounted Flash Units
X100F Owner’s Manual: P 142
instax SHARE printers
SP-1/SP-2/SP-3: Connect via wireless LAN to print pictures on
instax lm.
Changes and Additions
Using Shoe-Mounted Flash Units
X100F Owner’s Manual: P 144
Third-party studio ash commanders compatible with
the FUJIFILM ash system can now be used. For more
information, see the documentation provided your studio ash unit.
EN-3ENGLISH
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
Loading...