GETTING Started
WITH YOUR
FRIGIDAIRE MULTI-DOOR REFRIGERATOR
BEFORE YOU START
Before starting your refrigerator
Remove tape and glue residue from surfaces before turning on the refrigerator. Choose a place that is near a grounded electrical outlet, allowing clearances for ease of installation, proper circulation, and plumbing and electrical connections.
Set up your refrigerator
After you remove all of the package materials, clean the inside of your refrigerator before using it. See CARE AND CLEANING in your Use & Care Guide.
YOU’RE IN CONTROL
Your refrigerator controls
Using your refrigerator starts with just pressing the keys on your refrigerator control. Adjust the temperature in small increments, allowing the temperature to stabilize.
GALLERY
1 |
5 |
4
6
2
3 |
7 |
|
1.Quickly freezes food. Deactivates after 12 hours.
2.Quickly chills a drink inside the freezer compartment. Touch the Cold Drink Timer key. Time value can be changed using the +/- buttons.
3.Press and hold for 3 seconds to turn ice maker on/off.
4.Adjusting Temp illuminates when temperatures are changed. Press either the + or - to adjust to desired temperature setting. Unit should stabilize temperatures within 24 hours of installation.
5.Quickly chills food. Deactivates after 6 hours.
6.Replace filter, press and hold for 3 seconds to reset.
7.Replace filter, press and hold for 3 seconds to reset.
1
2
3 
4
6
5
7
8
PROFESSIONAL
1.Select compartment for temperature change (FREEZER OR REFRIGERATOR). Press either the + or - to adjust to desired temperature setting. Unit should stabilize temperatures within 24 hours of installation.
2.Clear Alerts resets any alarms that are active and illuminated on the display.
3.Freeze Boost activates a faster rate for freezing food. Automatically deactivates after 12 hours.
4.Press to toggle between F & C.
5.For the Ice Maker inside the refrigerator, press and hold for 3 seconds to turn ice maker on/off.
6.Press and hold for 3 seconds to reset to default settings.
7.After replacing filter, press and hold for 3 seconds to reset. Status will reset to GOOD.
8.After replacing filter, press and hold for 3 seconds to reset. Status will reset to GOOD.
REMEMBER
•Always unplug the electrical power cord from the wall outlet before cleaning.
•Do not wash any removable parts in a dishwasher.
• Do not clean glass shelves or covers with warm water when they are cold. |
A16966401 (1911) |
Loading...