Fd27nkec
=== 1
====== 2
& Components .... 3°4
Grill Assembly
Built-In Instructions ........... 5-9
Gas Requirements
Leak Testing ................. 10-12
Using the Grill ................. 13
Lighting the Grill ................. 14
Care & Maintenance ............. 15
Before You CaJm
TroubJe Shooting ............. 16-17
Visit the Frigidaire Web Site at:
Warranty ......................... 18
http:flwww.frigidaire.com
READ AND SAVE THESE INSTRUCTIONS - MADE IN THE U.S.A.
FD261MDEN 1/04
Congratulations on your purchase of a new gas grill! At Electrolux Home Products, we
are very proud of our product and are completely committed to providing you with the
best service possible. Your satisfaction is our number one priority.
We know you'll enjoy your new gas grill and Thank You for choosing our product. We
hope you consider us for future purchases.
PLEASE CAREFULLY READ AND SAVE THESE INSTRUCTIONS
This Use & Care Manual provides specific operating instruction for your model. Use your
gas grill only as instructed in this manual. These instructions are not meant to cover every
possible condition and situation that may occur. Common sense and caution must be
practiced when installing, operating and maintaining any appliance.
Questions? 1-800-320-0859
Please record Grill information for future reference and service work:
Model #:
Serial #:
Date of Purchase:
Gas Type:
Please retain this manual for future reference
6) 2004 Electrolux ttome Products, lnc All rights reserved
IMPORTANT SAFETY INFORMATION
- Read this manual carefully before using your grill to reduce the risk of fire, burn hazard or
other injury.
- Extreme care should be used because of the high temperatures produced by this appliance. CHILDREN SHOULD NOT BE LEFT
UNATTENDED IN AN AREA WHERE THE GRILL IS BEING OPERATED.
- This appliance rnust be kept clear from combustible materials, gasoline or other flammable vapors and liquids. Do not allow
flammable materials to come in contact with grate, burner or hot surfaces.
- Do not repair or replace any part of this appliance unless it is specifically recommended in this manual. A qualified service techni-
cian should conduct all other service.
- Follow the installation and servicing instructions provided with this product. Have your grill installed by a qualified service techni-
cian. Locate the main gas supply valve so that you know how to shut the gas off to your grill. If you smell gas, make sure all gas
connections are tight before operation. If you continue to smell gas call a qualified technician.
- When lighting a burner, always pay close attention to what you are doing. Be certain you are pushing the ignitor that lights the
burner you intend on using.
2
6
7
3
1. Roll top grill hood 6. ttandle
2. Grilling/Cooking surI:ace 7. Warming shelf
8
9
3. Electronic ignitor: main burners 8. Side shelf
4. Control knobs: main burners 9. Pedestal base
5. Convection vents
Cart Parts
1 3 sided pedestal base
1 Base
2 Wheel channels
Part #'s
WIP- 192-326071
WIP- 191-326070
WlP- 192-326365
Grill Parts
Stainless steel grill head
Stainless steel side shelves
1
1
2
1
1
1
1
Assembly Parts
8 Hex head screws
4 Bolts
Electronic ignitor
Flavor grid
Porcelain bar grates
Stainless steel warming rack
Drip pan
Hose and regulator (LP models only)
Black plastic plug for right shelf hole
Grill Parts
WIP- 122-HDFA26
WIP- 192-326393
RMP-122-00648
WlP- 192-326313
RMP-122-00688
WlP- 192-326009
RMP-122-00005
RMP-122-00820
RMP- 122-00491
Assembly Parts
RMP-122-00615
RMP- 122-00036
Note: Prior to assembly remove protective film from stainless steel parts
Cart Assembly
.
Set 3 sided pedestal upside down. Set the base
on the top of the cart assembly aligning the four
wheel channel holes and 2 screw holes. Then set
the 2 wheel channels on the base and attach them
using the (4) bolts provided, fiom inside the cart
upwards through wheel channels. (See Fig. 1 & 2)
Screw Holes
3crew Holes Fig. 1
Fig. 2
Attaching Grill Head to Cart
1. With the grill on its back, (be sure to hold the
hood shut when doing this) loosen all 4 bolts
on the bottom side of the grill. (See Fig. 3)
.
[]ave someone help you pick up the grill and set it
on the top of the cart, with the rear of the grill
above the opening. Make sure the 4 bolt heads
fall through the large opening of the key hole slots
in the top of the cart. Slide the grill head
backward so the bolts are resting in the small
opening of the key hole slots. Tighten the bolts
securely-be sure not to over tighten and strip the
bolts. Next insert 2 hex head screws into grill
bottom through cart & 2 hex head screws into the
cart base. (See Fig. 4)
Note:
This is a very heavy step that requires
two individuals to complete.
Fig. 3
Fig. 4
Loading...