Foxconn nT-A3700, Nettop nT-A3000 Series User Manual
nT-A3000 Series Nettop
User’s Manual
Trademark:
All trademarks are the property of their respective owners.
Version:
User’s Manual V1.0 for nT-A3000 Series Nettop.
P/N: 3A223A900-000-G
Symbol description:
Caution : refers to important information that can help you to use NETTOP
better, and tells you how to avoid problems.
WEEE:
The use of this symbol indicates that this product may not be treated as household
waste. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could other-
wise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city ofce, your
household waste disposal service or the shop where you purchased this product.
C
A
U
T
I
O
N
!
© All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
All images are for reference only, please refer to the physical product for specic features.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
Before using this product, please read the below safety notice carefully,
this will help to extend the product’s lifecycle, and work normally.
■ When NETTOP is working, please make sure its ventilation system is
working.
■ The power adapter is dissipating heat during normal use, please be sure
not to cover it and keep it away from your body to prevent discomfort or
injury by heat exposure.
■ Please use the power adapter that comes with the product’s package,
wrong power adapter may damage your device.
■ Make sure all the peripherals are properly connected before using NET-
TOP.
■ This product should only be used in an environment with ambient tem-
peratures between 0◦C and 40◦C.
■ To reduce the risk of re, use only No. 26 AWG or larger UL listed or
CSA certied telecommunication line cord.
■ Always shut down the computer before installing or uninstalling the pe-
ripheral which does not support hot plug.
■ Disconnect all peripherals before servicing or disassembling this equip-
ment.
■ Please do not disassemble this product by yourself, any disassembly
not approved by the original manufacturer may result in malfunction, and
void warranty.
■ Risk of explosion if battery is replaced by an incorrect type, please dis-
pose of used batteries according to the instructions.
C
A
U
T
I
O
N
!
Safety Notice :
TABLE OF CONTENTS
Chapter 1 Introducing the NETTOP
Top ViewView ...................................................................................................2
Front Side ViewView ........................................................................................2
Back Side ViewView ........................................................................................3
Bottom ViewBottom View .............................................................................................3
Chapter 2 Placing and connecting the NETTOP
Placement of NETTOP
On the Desk .........................................................................................5
On the Display Back .............................................................................5
Connection of NETTOP
Connect the MonitorMonitor .............................................................................7
Connect the USB DevicesConnect the USB DevicesUSB Devices ....................................................................7
Connect the Network CableConnect the Network CableNetwork Cable .................................................................8
Connect the Power CordConnect the Power CordPower Cord ......................................................................8
Chapter 3 BIOS Setup
Enter BIOS Setup ...................................................................................10
Main .......................................................................................................11
Advanced ...............................................................................................13
Boot ........................................................................................................15
Security ..................................................................................................17
Save & Exit .............................................................................................18
Chapter 4 Install Windows 7 in NETTOP
Install Windows 7 ...................................................................................21
Install Drivers in Windows 7 ...................................................................25
Accessory List
Thanks for choosing our products. Please check the accessories listed below. If there is
anything broken or lost, please contact with your distributors as soon as possible.
DVI to VGA Adapter Power Adapter Power Cord
magnet rubber foot Vesa mount Seatbase
Opening Tool Mini PCIe Half Card Support Screw Cover
Screw for VESA Mounting
(M8.0X9.7mm)(4X)
Screw for HDD Support Bracket
(M:4.7X2.85mm)(4X)
Screw for Half MiniPCI Card
(M:4.4X2.85mm)(1X)
Screw for Half MiniPCI Half
Card Support Bracket
(M:4.4X4.85mm)(1X)
8.00mm
9.70mm
3.90mm
4.70mm
2.85mm
2.92mm
4.40mm
4.85mm
2.43mm
4.40mm
2.85mm
2.42mm
This chapter introduces NETTOP’s outlook :
■ Top View
■ Front Side View
■ Back Side View
■ Bottom View
1
2
1-1 Top View
No. Name Description
1 Headphone Port Connects to a headphone
2
Microphone In and S/PDIF In
Port
Connects to a microphone or playback devices with
optical connectors(3.5mm jack)
3 Multi-Function Card Reader Support SD/SDHC/MS/MS Pro/MMC memory cards
4 USB 3.0 Ports Connect to USB devices
Caution:Before using it, you need to install the “AS-
Media USB3.0 driver” in the Driver CD.
5 Suspend Button Enter suspend mode in operating system
6 Power Button with
Integrated LED Indicator
Turning the power on/off, Indicates system statesIndicates system states
24mm
1
2
3 64 5
No. Name Description
1 Kensington Lock Attach a Kensington security system or a compatible lock to
secure your Nettop
190mm
135mm
1
1-2 Front Side View
1
3
1-3 Back Side View
1-4 Bottom View
No. Name Description
1 USB 2.0 Ports Connects to USB devices
2 Display Output Port Connects to display device
3 HDMI Port Connects to HDMI audio and video
4 Network Port Standard RJ-45 network port
5
Line Out and S/PDIF Out Port
Connects to powered analog speakers or record-
ing devices with optical connectors(3.5mm jack)
6 Power Input Port Connects to the power adapter
4
3 652
1
No. Name Description
1 Sheet Metal NETDVD(optional accessary) or Magnet-Metal-Feet can mag-
netize them to seat rmly
There are four Magnet-Metal-Feet in the package. Just align them to the sheet metal
on the bottom, then they can magnetize the NETTOP easily. The feet can seat and
protect NETTOP when it is placed on the tabletop.
C
A
U
T
I
O
N
!
1
In this chapter, the placement and the connection of some neces-
sary peripherals will be introduced.
This chapter includes the following information:
■ Placement of NETTOP
■ Connection of NETTOP
2
5
2-1 Placement of NETTOP
1. On the Desk
1.1.You can install your NETTOP in the mount like the right image.
To install this bracket, your display must follow VESA75/VESA100 standard. The two
groups of holes on your dispaly have different space between, and they help you
easily fasten the bracket onto your display.
C
A
U
T
I
O
N
!
2. On the Display Back
This is the best space-saving way.
2.1. Use four screws to fasten the bracket onto the display back.
1.2. If there is enough space on your desk, you can simply put your
NETTOP on the tabletop as shown below.
Loading...