Ford F-550 Measurement Card

Trailer Reverse Guidance Measurement Card

STEP 4: Record Your Measurements

Use the space below to keep track of your measurements.

Note: Round o measurements
to the nearest half inch.

The horizontal distance from the

A

license plate to the center of the
ball hitch on the trailer.

The horizontal distance from the

B

center of the ball hitch to the
center of the sticker.

The distance from the rear-view

C

camera to the center of the sticker.

The horizontal distance from
the tailgate to the center of the

D

trailer axle (single axle) OR the
center of the trailer axles
(two or more axles).

Trailer Name

________________________

____________ in (cm) ____________ in (cm)

____________ in (cm) ____________ in (cm)

____________ in (cm) ____________ in (cm)

____________ in (cm) ____________ in (cm)

Trailer Name

________________________

Return to the vehicle and use the instructions in the Quick Start Guide to enter your
measurements into the information display.

Trailer Reverse Guidance Measurement Card

STEP 3: Placing Your Sticker

Placement Tips

• Perform sticker placement when temperatures are above 32° F (0° C)

• Clean the trailer.

• Place the sticker:
– On a fl at, dry, horizontal surface.
– Entire sticker must be visible to the camera located in the tailgate handle.
– Within the green zone as shown below, between 7 inches (17 cm) and

20 inches (51 cm) from the trailer ball hitch.

– Lengthwise on the trailer tongue.

• Once the sticker is in place, proceed to step 4 (see other side of this card).

20 in / 51 cm

20 in

51 cm

WARNING: Once placed, sticker cannot be moved. Do not attempt to re-use

stickers, if removed.

TrailerReverseGuidance.com

Scan the QR code for step-by-step videos of
the Trailer Reverse Guidance set up.

HC3J 19B146 DA