FlyDigi Electronics Technology WASP BT User Manual

LB Button

Joystick

B Button

A Button

Logo Button

LT Button

Lock

Package:

One-handed Gamepad, USB Cable, User Manual,

Utool

Using Wasp-BT

STEP 1： Download Flydigi Game Center

Or: Download via browser by visiting Flydigi official

website: down.flydigi.com

STEP 2： Flymapping Activating

Android users need to nish this step
while iOS users could skip it

1.Open Flydigi Game Center, tap Settings\Enable USB

Debug and enable USB debugging.

2.Connect Flydigi Utool as shown in the figure. The

indicator will stay red during this process.

4 5

3

2

1

Socket

1

Lightning cable4Mobile phone

3.If prompted for USB

debugging authorization

on the phone, select OK.

After completing activation, red light and blue light is on, then
unplug the Flydigi Utool

Charging plug2 Flydigi Utool

3

5

Allow USB debugging?

The computer ’s RSA key finger print is:
C7:BB:CC:19:26:38:24:97:09:C6:BE:98:EA:5B:16:D7

Always allow from this computer

Cancel OK

STEP 3: Connect Bluetooth to Your Phone

Please follow the steps below (based on instruction for

controller connection from Flydigi Game Center)

1.Turn on Wasp by sliding the switch to the left, press

and hold the logo button for 5 seconds;

Controller is now in matching mode (logo button light

is blue and blinking)

2.Go to Setting > Bluetooth

Go to Setting and turn on Bluetooth on your phone.

Tap Wasp-BT from search result to pair.

For paired gamepads, when your gamepad is in

connecting area, just press logo button to reconnect

STEP 4： Installation

1. Blue handle will pop up sliding down the lock
button

2.Press the blue handle until your phone is secured

STEP 5：Start Playing

Android user

For games that are not found from Flydigi Game Center,

1.

please add it manually from “My Game Center”.

2.

Wasp will function properly only if the game is started

from Flydigi Game Center.

3.

Games such as PUBG support original gamepad control,

4.

You could enjoy the game by simply connecting your

Wasp to Bluetooth.

iOS user

You should download the game from Flydigi Game Center.

1.

Please uninstall original games downloaded from App Store.

Starting gaming app through Flydigi Game Center is

2.

suggested; you could also simply tap games on your

desktop to get started.

Games downloaded from Flydigi Game Center do not

3.

support in app purchase.

Games such as PUBG support original gamepad control, You

4.

could enjoy the game by simply connecting your Wasp to

Bluetooth.

Shanghai Flydigi Electronics Technology Co., Ltd.

Rm1108, No.258 Guoxia Rd, Yangpu District, Shanghai,

P.R.China

Tel: [phone]

QQ: 400-850-3336

Web: www.flydigi.com

FB: Flydigi

Basic operation
and Indicator Light Description

Slide the power

Turn On/Off

Pairing

Paired/­Function
properly

Reconnect

Charging

button to the left

Slide the power
button to the right

Press and hold the
logo button for
more than 5
seconds

After pairing

After starting up,
automatically
reconnect to
paired device

During charging

Charging is
completed

Power indicator
blinks in green
twice

Logo light blinks
fast in blue

Logo light stays
blue

Logo light stays
blue

Power indicator
stays red

Power indicator
turns off

When battery is

Low Battery
Status

Firmware
update

Adjust
Joystick

below 20%

When battery is
below 10%

When Wasp is off,
press and hold
LT+LB button,
then turn on Wasp

Press and hold
Logo button and
LB button for 3
seconds

Specification

Supported
Devices

Wireless Projection

Distance

iOS

Android

Power indicator
blinks slowly in
green

Power indicator
blinks fast in green

Updating- Power
indicator stays
green

Completed- Power
indicator is off

Power indicator
blinks in green
twice

iPhone 6-8 & iPhone 6Plus ‒
8Plus & iPhone X

Support Bluetooth 4.0;
Thickness <9mm; Width <82mm

2.4-2.485Ghz & BT4.0 BLE

<10m

Device Dimension

Battery Capacity

Electric Current

Input

Battery Life

Operating Environment

Weight

110.82*81.31*19.03mm

300mAh; Charging time 1.5-2 hours

<4mA

5V, Current: 260mA

80 hours

0 °C - 40 °C

90±5g

FAQ

1

How to upgrade my Wasp?

The factory setting is stable firmware. We will

irregularly release new firmware to enhance the

compatibility of Wasp to optimize your gaming

experience.

What can I do if joystick does not

2

function properly?

You could test joystick in Flydigi Game Center

Press and hold Logo button and LB button at the

same time for 3 seconds to recalibrate the joystick.

The light blinks green twice means that recalibration is

completed

3

What can I do if Flydigi adapter is not
working?

Red light keeps blinking：

1.

The lightning cable or USB is not working well. Please use
another lightning cable to try again (some of the lightning
cables support charging only, but not suited for data
transmission)

2.

Blue light keeps blinking or blue light is off：

Please ensure USB debugging is on (Enter Flydigi Game
Center > Manage > Device Setting > Activate Projection >
Activate Flydigi adapter > Developer Setting > USB
Debugging)

Activation failed after Red and blue light is on：

3.

Please reactivate your phone and try again after few
minutes.

Blue light blinks slowly：

4.

Flydigi Game Center may not be installed in your phone.

方案一

Please follow instructions from step 1: Install Flydigi Game
Center.

If Wasp still fails to activate, please contact our service
center.

WASP-BT

User Manual