QUICK START GUIDE
Scrape food off
Remove all food scraps off the dishes.
Scrape food off
Remove all food scraps off the dishes.
Load dishes carefully
Ensure no items protrude out of the drawer.
Check spray arm(s)
Ensure no item blocks the
spray arm(s) from rotating freely.
dishdrawer loading diagrams
DishDrawer
NZ AU US CA
Keep this document handy for easy reference.
For detailed information on the features of your dishwasher, see your ‘User guide’.
Before using your dishwasher, make sure you read the full ‘User guide’, with special attention to the ‘Safety and warnings’ section.
For contact information or if you require service, assistance or replacement parts, see the end of this document or your ‘Service &
warranty’ booklet.
TM
dishwasher (Classic)
YOUR MODEL
Note: each drawer can
DD60DAW8
DD60DAX8
DD24DAW8
DD24DAX8
run independently of
the other drawer.
WASH PROGRAM CONTROLS
Wash program indicators
These show which
program is selected.
HEAVY
Heavily
soiled pots,
pans and
dishes.
NORMAL
Dishes that are
quite heavily
soiled or food
soils that have
been left to dry
overnight. This
is the default
setting.
CONTROLS AND DISPLAY
NORMAL ECO
Normal soiled
dishes for
optimum water
and energy
usage. The
Energy Guide
is based on this
cycle.
FAS T
Lightly
soiled
dishes.
Wash program selector
Press to scroll
through the wash programs.
GENTLE
Lightly
soiled and
heat sensitive
crockery.
RINSE
Prevents
odors and
soils drying
on dishes.
OPERATING INSTRUCTIONS - STARTING A WASH
1 4
Discard scraps
Scrape large food particles
off (e.g. bones, fruit stones)
and remove any foreign
objects (e.g. toothpicks,
strings, paper).
a
2
Load dishes carefully
To help with wash
performance,
arrange dishes so they are
evenly spaced and not
nesting.
3
Check spray arm(s)
Ensure there are no items
blocking the spray arm(s)
from rotating.
5
6
Add detergent and check rinse aid
Fill the detergent dispenser (a) with
powdered detergent and close the
dispenser door.
Wash program indicators
These show which
program is selected.
Tub indicator
Press
between drawers.
to scroll
Drawer indicator
Red: drawer is on and selected.
White: drawer is on but not selected.
Display
Time remaining (minutes)
Fault code numbers
(see ‘If there is a
fault’ in your User guide).
Wash stage indicators
(See ‘During and after
the wash cycle’).
ImpoRTAnT!
Do not place liquid detergent or
tablets in the detergent dispenser.
b
d
c
If the indicator on its plug (c) glows
bright red, refill the rinse aid
dispenser (b) with liquid rinse aid.
Make sure you then refit the rinse
aid plug back into its original
position.
If using a tablet, place it in the
cutlery basket (d) or at the bottom
of the drawer.
Select wash
Power the dishwasher on
then select wash program .
Start wash or set Delay start
Close the drawer and press
.
Keylock/Childlock
indicator
If lit: keylock or
childlock is activated.
Off/On
Press
off.
Opening the door will automatically
turn the dishwasher on.
Keylock
Keylock disables all the buttons –
helpful when cleaning the dishwasher.
To activate: press and hold until
you hear one beep. The keylock
indicator will come on.
To cancel: press and hold until the
indicator stops flashing and goes out.
Childlock
Childlock disables all the buttons and
locks the drawer, preventing
unauthorized use by children.
To activate: Press and hold until
you hear a second beep. The keylock
indicator will come on.
To cancel: press and hold until the
indicator stops flashing and goes out.
to turn the dishdrawer on or
Wash selector
Press
through wash
program options.
Cancel wash/Cancel Delay start
Press
already started or to cancel the
Delay start setting.
If there is any water in the drawer,
it will automatically drain before
the dishwasher turns off.
to scroll
to cancel a wash that has
Delayed start
indicator
If lit: start is delayed.
Start
Press to start the wash.
To pause:
Press again. The
drawer indicator light will
flash.
Wait for the 3 short and one
long beep before opening the
drawer. Forcing it open mid
cycle may cause damage or
injury.
If the drawer is not restarted within
7 minutes it will beep intermittently
until it is restarted.
To Delay start
1 Press and hold until1h appears
on the display, then release. You are
now in Delay start mode.
2 Press and hold until the display
shows the number of hours you
want to delay the start of a wash
by (1 to 12 hours). The wash will
start once the delay time is over,
provided the drawer is closed.
continued >
DURING AND AFTER THE WASH
Scrape food off
Remove all food scraps off the dishes.
Load dishes carefully
Ensure no items protrude out of the drawer.
PREFERENCE OPTIONS
As the wash progresses, the display will count down the minutes remaining and show what stage the program is at.
When the program has finished, the display will show 0 and the dishwasher will beep.
After 30 seconds the display will go out.
You may notice the following noises at the end of the wash. These are all part of normal operation:
Both drawers may be draining simultaneously.
The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened.
The fan assists with drying and uses negligible amounts of energy.
For best drying results, we recommend unloading the dishes once they have cooled.
DOS AND DON’TS OF LOADING
Sharp or pointed items must be placed
horizontally or with sharp edges/points
facing down to avoid risk of injury.
Protruding items will stop the
internal lid of the dishwasher from
sealing properly, which could result
in a service call.
You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable
settings before you start using your dishwasher.
OPTION RINSE AID
What
does
it do?
Regulates the amount
of rinse aid dispensed.
Reduce this setting if
there is excess foam after
a wash. Increase this
setting if dishes are wet
or streaky after a wash.
OPEN DRAWER
AUTO POWER-ON
Your dishwasher
is factory-set to
automatically power
on for 30 seconds
whenever you open
the drawer.
You can turn this
TURN BEEPS OFF CLOSED DRAWER AUTOLOCK
This turns all beeps off
except for fault alerts.
When this setting is on,
the drawer will automatically
lock 30 seconds after it’s closed.
It can then be unlocked by
pressing
(unless Keylock
or Childlock is also activated).
Useful in boats or motor homes.
setting off.
How to change the setting of an option
1 CHECK
Check that there is no wash underway, press
2 ENTER MENU & SCROLL TO OPTION
To enter the menu: Press and hold the and together for 5 seconds.
You are now in the Rinse aid option of the preference options menu.
If you want to change the Rinse aid setting, go to step 3 now.
If you want to change the setting of another option, you will need to scroll to that option first.
To scroll to the next option: press . To know which option you’re in, watch the letters in the display (see table below).
When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).
OPTION RINSE AID
OPEN DRAWER
AUTO POWER-ON
BEEPS AT END
OF WASH
CLOSED DRAWER
AUTOLOCK
Which option
am I in?
A neatly arranged load with evenly
spaced dishes helps wash performance.
Ensure there is enough space between
plates. Mix spoons, knives and forks
within the cutlery basket to prevent
them from nesting.
Ensure that water reaches all items on
the racks.
Overcrowding reduces wash
performance.
If plates and cutlery are nesting,
they are less likely to be cleaned
well.
Dishware is blocking water from
reaching items on the racks.
Possible
Off to Max (rA5) On or Off On or Off On or Off
settings
Example setting is 1
setting is 4
On
Off
3 CHANGE SETTING
Press
to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2,
you need to press 3 times.
4 SAVE SETTING & QUIT MENU
Press . This will save the new setting and quit the preference options menu.
FOR MORE INFORMATION
For detailed information on the
features of your dishwasher
For warranty information
If you…
have any questions or comments
need a Fisher & Paykel authorized
technician to service your product
need replacement parts or accessories
want to register your product
see your ‘User guide’
see your ‘Service and warranty’ booklet
see your ‘Service and warranty’ booklet or contact us
NZ toll-free, 24/7 0800 372 273
AU toll-free, 24/7 1300 650 590
USA toll-free, 24/7 1 888 936 7872
CA toll-free, 24/7 1 888 936 7872
www.fisherpaykel.com
On
Off
On
Off
590663A 08.14