Fiat Qubo 2016 Owner's Manual

FIATQUBO

OWNER HANDBOOK

WHY CHOOSING

GENUINE PARTS

We really know your vehicle because we invented,

designed and built it: we really know every single detail. At Fiat Professional Service authorised workshops

you can find technicians directly trained by us, offering quality and professionalism for all service operations.

Fiat Professional workshops are always close to you for the regular servicing operations, season checks and practical

recommendations by our experts.

With Fiat Professional Genuine Parts you keep the reliability, comfort and performance features of your

new vehicle unchanged in time: that's why you bought it for.

Always ask for Genuine Parts for the components used on our vehicles; we recommend them because they come from

our steady commitment in research and development of highly innovative technologies.

For all these reasons: rely on Genuine Parts,

because they are the only ones designed by Fiat Professional for your vehicle.

SAFETY: BRAKING

SYSTEM

ENVIRONMENT: PARTICULATE FILTERS,

CLIMATE CONTROL SYSTEM MAINTENANCE

SUSPENSION AND WINDSCREEN WIPERS

COMFORT:

PERFORMANCE:

SPARK PLUGS, INJECTORS AND

BATTERIES

LINEACCESSORI:

ROOF RACK BARS, WHEEL RIMS

CHOOSING GENUINE PARTS

IS THE MOST NATURAL CHOICE

PERFORMANCE

GENUINE PARTS

COMFORT

GENUINE PARTS

SAFETY

GENUINE PARTS

AMBIENT

GENUINE PARTS

ACCESSORIES

GENUINE PARTS

VALUES

GENUINE PARTS

HOW TO RECOGNISE

GENUINE PARTS

All Genuine Parts undergo strict controls, both during design and manufacturing stages,

This to guarantee performance and safety for you and your passengers on board,

Always ask for and make sure a Genuine Part has been used.

by specialists using vanguard materials,

to test the component reliability.

for a long time.

Dear customer,

Thank you for choosing Fiat and congratulations on your choice of a Fiat QUBO. We have written this handbook to help you get to know all your new Fiat QUBO's features and use it in the best

possible way. You should read it carefully before taking to the road for the first time. You will find information, tips and important warnings regarding driving your vehicle to help you get the most from the technological features of your FIAT QUBO.

Read the warnings and indications, marked with the following symbols:

personal safety;

car safety;

environmental protection.

The enclosed Warranty Booklet lists the services that Fiat offers to its Customers:

❒ the Warranty Certificate with terms and conditions for maintaining its validity; ❒ the range of additional services available to Fiat Customers.

Enjoy reading. Happy motoring!

This Owner Handbook describes all Fiat QUBO versions. As a consequence, you should only consider the information which is related to the trim level, engine and

version that you have purchased.

READ THIS CAREFULLY!

REFUELLING

Diesel engines: only use diesel fuel for motor

vehicles conforming to the European specification EN 590. The use of other products or mixtures may damage the engine beyond repair and consequently invalidate the warranty, depending on the damage caused.

STARTING THE ENGINE

Diesel engines: Turn the ignition key to MAR

and wait for the warning light to go out. Turn the ignition key to AVV and release as soon as the engine starts.

PARKING ON FLAMMABLE MATERIAL

The catalytic converter develops high temperatures during operation. Do not park the vehicle on grass, dry leaves, pine needles or other flammable material as this constitutes a fire hazard.

RESPECTING THE ENVIRONMENT

The vehicle is fitted with a system that allows continuous diagnosis of the emission-related components in order to help protect the environment.

ELECTRICAL ACCESSORIES

If, after buying the vehicle, you decide to add electrical accessories (with the risk of gradually draining the battery), visit a Fiat Dealership. They can calculate the overall electrical requirement and check that the electrical system of the vehicle can support the required load.

SCHEDULED SERVICING

Correct maintenance is essential for ensuring the vehicle stays in tip-top condition and retains its safety features, its environmental friendliness and low running costs for a long time to come.

THE OWNER'S HANDBOOK CONTAINS…

... important information, advise and warnings for correct use, driving safety and maintenance of your vehicle over time. Particular attention should be paid to information marked with the following symbols:

(environmental protection), (car integrity).

(personal safety),

KNOW YOUR VEHICLE

DASHBOARD

The presence and position of controls, instruments and indicators may vary according to the versions.

KNOW YOUR VEHICLE

SAFETY

STARTING AND DRIVING

WARNING LIGHTS AND MESSAGES

IN AN EMERGENCY

fig. 1

1. Vent for directing air to the side windows 2. Adjustable air vent 3. Left-hand stalk: exterior lights 4. Instrument panel and warning lights 5. Right-hand stalk: front and rear windscreen wipers, trip computer 6. Radio (for versions/markets, where applicable) 7. Emergency light switch, heated rear window switch, ASR/Traction Plus on/off switch (for versions/markets, where provided), rear swing door lock button (for versions/markets, where provided) 8. Passenger's air bag (for versions/markets, where provided) 9. Glove box/oddment tray (for versions/markets, where provided)

10. Adjustable air vents 11. Heating/ventilation/climate control system controls 12. Glove compartment 13. Ignition switch 14. Driver's air bag 15. Bonnet opening lever 16. Controls display: fog light/rear fog light/head light alignment adjustment/display

F0T0070

SERVICING AND MAINTENANCE

TECHNICAL SPECIFICATIONS

INDEX

INSTRUMENT PANEL

KNOW YOUR

VEHICLE

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

Versions with multifunction display

Warning lights

SAFETY

and are available on diesel versions only.

TECHNICAL

SPECIFICATIONS

INDEX

fig. 2

A. Speedometer (speed indicator) B. Fuel level gauge with reserve warning light C. Engine coolant temperature gauge with overheating warning light D. Rev counter E. Multifunction display

F0T0460

SYMBOLS

Special coloured labels have been attached near or on some of the components of your vehicle. These labels bear symbols that draw your attention to the precautions required when handling the component in question.

The inner surface of the engine bonnet includes a label with the different symbols used.

THE FIAT CODE SYSTEM

This is an electrical engine immobiliser system which increases protection against attempted theft of the vehicle. It is automatically activated when the ignition key is extracted.

Each time the vehicle is started turning the ignition key to MAR, the Fiat CODE system control unit sends a recognition code to the engine control unit to deactivate the inhibitor.

If, during ignition, the code is not correctly recognized, a warning light instrument panel.

In this case, turn the key to STOP and then back to MAR. Try with the other keys provided if the problem persists. Contact a Fiat Dealership if you still cannot start the engine.

is lit on the

KNOW YOUR VEHICLE

SAFETY

STARTING AND DRIVING

WARNING LIGHTS AND MESSAGES

IMPORTANT Each key has its own code which must be stored by the system ECU. Contact the Fiat Dealership to have new keys (up to eight) stored with the code.

Warning light

❒ If the

comes on, this means that the system is running a self-diagnosis test (caused, for example, by a voltage drop). When you stop for the first time, turn the key to STOP and then to MAR: the warning light detected.

warning light (or symbol in the display)

coming on when driving

will not light up if no faults are

IN AN EMERGENCY

SERVICING AND MAINTENANCE

TECHNICAL SPECIFICATIONS

INDEX

❒ If the warning light (or symbol on the display)

KNOW YOUR

VEHICLE

❒ The code is not recognised if the warning light

SAFETY

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

stays on, repeat the procedure described above leaving the key at STOP for longer than 30 seconds. If the problem persists, contact the Fiat Dealership.

(or symbol on the display) stays on. In this case, turn the key to STOP and then to MAR; if it is still locked, try again with the other keys that come with the vehicle. If you still cannot start the engine, perform the emergency start procedure (see chapter “In an emergency”) and then contact the Fiat Dealership.

The electronic components inside the key may be damaged if the key is subjected to sharp knocks.

KEYS

KEY WITHOUT REMOTE CONTROL

The metal insert A fig. 3 operates:

❒ the ignition switch; ❒ the door locks; ❒ opening/closing the fuel cap.

TECHNICAL

SPECIFICATIONS

INDEX

fig. 3

F0T0002

KEY WITH REMOTE CONTROL

(for versions/markets, where provided)

The metal insert A fig. 4 operates:

❒ the ignition switch; ❒ the door locks; ❒ opening/closing the fuel cap.

To extract the metal insert, press button B fig. 4.

WARNING

Only press button B with the key away

from your body, specifically from your eyes and from objects which could get damaged (e.g. your clothes). Do not leave the key unattended to avoid the button being accidentally pressed while it is being handled, e.g. by a child.

KNOW YOUR VEHICLE

SAFETY

To retract it in the grip, proceed as follows:

❒ hold down button B and move the metal insert A; ❒ release button B and turn the metal insert A

until you hear the click.

fig. 4

F0T0241

Opening the windows with the remote control

(for versions/markets, where provided)

Hold the button (on the key)

pressed for more than 3 seconds to open the windows. Keep the button pressed to open the windows completely; if the pressure is suspended, the windows will immediately stop in their current position. The same type of opening is also possible by operating the pawl of the front door handles.

Closing the windows with the remote control

(for versions/markets, where provided)

Hold the button (on the key)

pressed for more than 3 seconds to close the windows. To close the windows completely, keep the button pressed; if the pressure is suspended, the windows will immediately stop in their current position. The same type of closing is also possible by operating the pawl of the front door handles.

IMPORTANT During this operation the window ant-crush safety system is inhibited.

STARTING AND DRIVING

WARNING LIGHTS AND MESSAGES

IN AN EMERGENCY

SERVICING AND MAINTENANCE

TECHNICAL SPECIFICATIONS

INDEX

Changing battery - key with remote control

KNOW YOUR

VEHICLE

To replace the battery, proceed as follows fig. 5:

❒ press button A and bring the metal insert B to the

❒ turn the screw C to

SAFETY

❒ take out the battery case D and replace the

❒ refit the battery case D inside the key and fasten it

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

specified by law or by taking them to a Fiat Dealership, which will deal with their disposal.

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

open position;

using a fine bit screwdriver;

battery E, respecting its polarity;

by turning the screw C to

Used batteries are harmful to the environment.You can dispose of them either in the correct containers as

ORDERING ADDITIONAL REMOTE CONTROLS

The system acknowledges up to 8 remote controls. Should a new remote control be necessary, contact a Fiat Dealership, taking a personal identity document and the vehicle ownership documents with you.

DEAD LOCK

(for versions/markets, where provided)

This security device prevents the opening of the doors from inside the passenger compartment if there has been a break-in attempt (e.g. a window has been broken).

Dead lock therefore offers the best possible protection against break-in attempts. We recommend engaging it whenever the vehicle is parked and left unattended.

WARNING

Once the dead lock system is engaged it

is impossible to open the doors from inside the vehicle. Before engaging the system please therefore check that there is no one left on board.

INDEX

fig. 5

F0T0300

WARNING

If the remote control battery is flat, the

system can be engaged by inserting the metal key in the door lock as described previously: in this case, the device only remains active for the rear doors.

Switching the device on

The system is automatically enabled on all the doors by pressing button control.

The direction indicators flash twice to let you know that the device is active.

If one or more of the doors is not perfectly shut, the dead lock device will not be activated, thus preventing a person getting into the car through the open door and, on shutting, it, remaining stuck inside the passenger compartment.

Switching the device off

The system is disabled automatically on every door when:

❒ by unlocking the doors; ❒ by turning the ignition key to the ON position.

twice on the key with remote

ALARM

(for versions/markets, where provided)

The alarm, in addition to all the previously described remote control functions, is controlled by the receiver located under the dashboard near the fuse box.

ALARM TRIPPING

The alarm trips in the following cases: ❒ unauthorised opening of a door, the bonnet, the

tailgate or a sliding side door (if present) (perimeter protection)

❒ unauthorized operation of the starting device (key

turned on using a key that is not enabled)

❒ cutting of the battery leads ❒ moving presence inside the passenger

compartment (volumetric protection) ❒ anomalous lifting/tilting of the vehicle. Depending on the market, the activation of the alarm

causes the activation of the siren and the direction indicators (for about 26 seconds). Alarm tripping and the number of cycles depend on the sales market.

There are a maximum number of acoustic/visual cycles. When this is reached the system returns to normal operation.

Volumetric and antilifting protections are disabled by pressing the control button installed on the front dashboard (see paragraph "Antilift protections).

KNOW YOUR VEHICLE

SAFETY

STARTING AND DRIVING

WARNING LIGHTS AND MESSAGES

IN AN EMERGENCY

SERVICING AND MAINTENANCE

TECHNICAL SPECIFICATIONS

INDEX

IMPORTANT The engine immobilizer function is

KNOW YOUR

VEHICLE

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

ensured by the Fiat CODE which is automatically activated when the key is extracted from the ignition.

TURNING THE ALARM ON

With the doors and bonnet closed and the ignition

SAFETY

key either turned to STOP or removed, point the key with the remote control towards the vehicle and press and release button

Except for some markets, the system produces an acoustic warning (beep) and enables door locking.

A self-diagnostic stage precedes the turning on of the alarm: if a fault is detected, the system produces another acoustic signal.

In this case switch off the alarm by pressing check that all the doors, bonnet and tailgate are closed correctly; then switch the alarm back on by pressing .

If a door or the bonnet is not properly shut, it will be excluded from the testing by the alarm system.

A fault has occurred in system operation if the alarm produces an acoustic signal even when the doors, bonnet and boot are correctly closed. Go to a Fiat Dealership.

IMPORTANT The alarm does not come on when the central locking is activated using the metal insert in the key.

IMPORTANT The alarm is configured to comply with

INDEX

the regulations existing in different countries.

TURNING THE ALARM OFF

Press button The following operations are performed (excluding

specific markets):

❒ direction indicators flash briefly twice ❒ two short beeps

❒ door are unlocked.

IMPORTANT The alarm is not turned off using the door are opened using the metal insert in the key.

VOLUMETRIC/ANTILIFTING PROTECTION

The side windows must be completely closed for correct operation of the protection.

If necessary, the function can be turned off (if, for example, you are leaving a pet in the car) by pressing button A fig. 6 on the front courtesy light before activating turning the alarm on.

The LED on the button will flash for several seconds when the function is turned off. The volumetric/ antitilting protection must be deactivated each time the instrument panel is switched off.

BREAK-IN ATTEMPT INDICATION

The warning light appears on the display with a specific message (see "Warning lights and messages" when the panel lights up according to vehicle version) to indicate a break-in attempt.

on the key with the remote control.

comes on or the symbol

DISABLING THE ALARM

To permanently disable the alarm (e.g. during a long storage), simply lock the vehicle by turning the metal insert of the key with remote control in the lock. In this case, the car will not be protected by the alarm system, while the engine immobiliser function is ensured by the Fiat CODE system, which is automatically activated when the key is removed from the ignition switch.

IMPORTANT If the batteries in the remote control key are run down or if the system is faulty, the key must be inserted in the ignition and turned to the ON position to switch the alarm off.

IGNITION SWITCH

The key can be turned to 3 different positions fig. 7: ❒ STOP: engine off, key extractable, steering locked.

Some electrical devices (e.g. car radio, central

door locking system, alarm, etc.) can work. ❒ MAR: driving position. All electrical devices can

work. ❒ AVV: starting the engine. The ignition switch is

fitted with an electronic safety system that

requires the ignition key to be turned back to

STOP if the engine does not start, before the

starting operation can be repeated.

KNOW YOUR VEHICLE

SAFETY

STARTING AND DRIVING

WARNING LIGHTS AND MESSAGES

IN AN EMERGENCY

SERVICING AND MAINTENANCE

fig. 6

F0T0159

fig. 7

TECHNICAL SPECIFICATIONS

INDEX

F0T0039

STEERING LOCK

KNOW YOUR

VEHICLE

Engagement

When the key is at STOP, remove the key and turn the steering wheel until it locks.

SAFETY

Disengagement

Move the steering wheel slightly as you turn the

STARTING AND

ignition key to MAR.

DRIVING

WARNING LIGHTS

AND MESSAGES

automatically as soon as it is turned.This also applies to cases in which the vehicle is towed. It is absolutely forbidden to carry out any

IN AN EMERGENCY

after-market operation involving steering system or steering column modifications (e.g. installation of anti-theft device) that could badly affect performance and safety, invalidate

SERVICING AND

MAINTENANCE

the warranty and also result in the car failing to comply with regulations.

INSTRUMENTS

The instrument background colour and type may vary according to the version.

SPEEDOMETER (speed indicator)

This shows the speed of the vehicle fig. 8.

WARNING

Never extract the key while the vehicle is moving.The steering wheel should lock

TECHNICAL

SPECIFICATIONS

INDEX

fig. 8

F0T0402

REV COUNTER

The rev counter fig. 9 shows the number of engine revolutions per minute.

IMPORTANT The electronic injection control system gradually shuts off the flow of fuel when the engine is over-revving, resulting in a gradual loss of engine power.

When the engine is idling, the rev counter may indicate a gradual or sudden increase of the engine speed.

This is normal and does not indicate a fault. It may be caused, for example, by the operation of the climate control system or the fan. In these cases, a gradual variation in revs is used to protect the battery charge.

FUEL LEVEL GAUGE

This shows the amount of fuel left in the fuel tank. Warning light A fig. 10 comes on to indicate that

approximately 6-7 litres of fuel are left in the tank. E - tank empty. F - tank full (see the description in paragraph "Vehicle

refuelling" in this chapter). Do not travel with the tank nearly empty to prevent

damaging the catalytic converter.

IMPORTANT The needle will point to E and warning light A will flash to indicate a fault in the system. If this is the case, contact a Fiat Dealership to have the system checked.

KNOW YOUR VEHICLE

SAFETY

STARTING AND DRIVING

WARNING LIGHTS AND MESSAGES

IN AN EMERGENCY

SERVICING AND MAINTENANCE

fig. 9

F0T0403

fig. 10

TECHNICAL SPECIFICATIONS

INDEX

F0T0404

ENGINE COOLANT TEMPERATURE GAUGE

KNOW YOUR

VEHICLE

The needle shows the temperature of the engine coolant and starts supplying indications when the fluid temperature exceeds approx. 50°C. Under normal usage, the needle should hover around the middle of the scale, depending on the way the vehicle

SAFETY

is used. C - Low engine coolant temperature.

STARTING AND

DRIVING

H - High engine coolant temperature. Warning light B fig. 10 switches on (together with a

message on the display) to indicate that the coolant temperature is too high; in this case, stop the engine

WARNING LIGHTS

and contact a Fiat Dealership.

AND MESSAGES

IN AN EMERGENCY

Dealership.

SERVICING AND

MAINTENANCE

If the needle for the engine coolant temperature reaches the red area, stop the engine immediately and contact a Fiat

MULTIFUNCTION DISPLAY

The vehicle may be equipped with a multifunction display that gives the driver useful information depending on the previous settings.

STANDARD SCREEN

The standard screen fig. 11 shows the following information:

Date.

Odometer (distance covered in km or miles).

Time.

Outside temperature (not present on methane

vehicles, for which outside temperature is displayed in trip menu, see "Trip computer").

Headlamp alignment position (only with dipped

headlamps on).

TECHNICAL

SPECIFICATIONS

INDEX

fig. 11

F0T0019

Note When one of the doors is opened, the display is activated showing the time and mileage for a few seconds.

CONTROL BUTTONS

To scroll through the screen and the options upwards or to increase the value displayed.

MENU ESC

Press briefly to access the menu and/or go to next screen or confirm the chosen menu option.

Hold down to go back to the standard screen.

To scroll down through the displayed menu and the related options or to decrease the value displayed.

Note Buttons

and activate different

functions according to the following situations:

Adjusting headlight alignment

- with the dipped beam headlights on, press button

or to adjust headlight alignment.

Setup menu

- in menus, to scroll up and down;

- in setting operations, to increase or decrease a value.

KNOW YOUR VEHICLE

SAFETY

STARTING AND DRIVING

WARNING LIGHTS AND MESSAGES

IN AN EMERGENCY

SERVICING AND MAINTENANCE

fig. 12

TECHNICAL SPECIFICATIONS

INDEX

F0T0449

SETUP MENU

KNOW YOUR

VEHICLE

SAFETY

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX

fig. 13

F0T1032

Setup menu function

The menu fig. 13 comprises a series of functions in "circular" arrangement, which can be selected by pressing the different operations and settings described in the following paragraphs. A submenu is provided for some items (clock and unit setting).

The setup menu can be activated by pressing the MENU ESC button briefly.

Press buttons options.

Management modes differ according to the option selected.

Selecting an option from the main menu without a submenu:

- briefly press MENU ESC to select the main menu option you wish to set;

- press new setting;

- a short press on button MENU ESC will store the setting and then return to the same main menu option that was first selected.

Selecting an option from the main menu with a submenu:

- briefly press the MENU ESC button to display the first submenu option;

- press the submenu options;

and buttons to access the

or to scroll the setup menu

or (with single presses) to select the

or (with single presses) to scroll all

- briefly press the MENU ESC button to select the displayed submenu option and to open the relevant setup menu;

- press new setting for this submenu option;

- briefly press the MENU ESC button to store the new setting and go back to the previous menu option.

Selecting “Date” and “Set time”:

- briefly press MENU ESC to select the first value to change (e.g. hours/minutes or year/month/day);

- press new setting;

- briefly press MENU ESC to store the new setting and go to the next setup menu option: if this is the last one you will go back to the previous menu option.

Hold down MENU ESC:

- to quit the set up menu if you are in the main menu;

- to quit the main menu if you are in another point of the menu (e.g. at submenu option setting level, at submenu level or at main menu option setting level);

- to save only the settings already stored (and confirmed by pressing the MENU ESC button).

The setup menu page is timed. Only the changes already stored by pressing the MENU ESC button are saved when you come out of the menu.

or (with single presses) to select the

KNOW YOUR VEHICLE

SAFETY

STARTING AND DRIVING

WARNING LIGHTS AND MESSAGES

IN AN EMERGENCY

SERVICING AND MAINTENANCE

TECHNICAL SPECIFICATIONS

INDEX

On the standard screen, briefly press MENU ESC to

KNOW YOUR

VEHICLE

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

start browsing. Press

Note Only the short menu may be accessed for reasons of safety while the vehicle is moving ("Speed

SAFETY

Beep" setting). Stop the vehicle to access the full menu.

Adjusting the vehicle interior lighting

This function is available with the dipped beam headlights on to adjust brightness of the instrument panel, buttons and radio display.

To adjust the light intensity, proceed as follows:

❒ press the MENU ESC button briefly to make the

❒ press button

❒ press the MENU ESC button briefly to return to

Speed limit (Speed Beep)

This function is used to set the vehicle speed limit (km/h or mph). When this limit is exceeded the driver is immediately alerted (see “Warning lights and messages” section).

To set the desired speed limit, proceed as follows:

INDEX

- briefly press the MENU ESC button: the display will show the words (Speed Beep);

or to browse within the menu.

display flash the previously set level;

and to set the required

brightness level;

the menu screen or give the button a long press to return to the standard screen without storing.

- press (On) or deactivation (Off);

- if the function is on, press required speed limit and then press MENU ESC to confirm;

Note Setting is possible between 30 and 200 km/h, or 20 and 125 mph, according to the previously stored unit. See the "Setting the unit of measurement" paragraph described below. The setting will increase/decrease by five units each time button increase/decrease the setting rapidly. Complete the setting by single pressing the button when you approach the required value.

- press the MENU ESC button briefly to return to the menu screen or give the button a long press to return to the standard screen without storing.

To cancel the setting, proceed as follows:

- press the MENU ESC button briefly to make the display flash (On);

- press

- press the MENU ESC button briefly to return to the menu screen or give the button a long press to return to the standard screen without storing.

Trip B activation (tripB data)

With this function is possible to turn the Trip B display (trip meter) on and off.

For more information see "Trip computer" paragraph.

or to select speed limit activation

or to select the

/ is pressed. Hold down / to

: (Off) will flash on the display;

For activation/deactivation, proceed as follows:

- briefly press MENU ESC: On or Off will flash on the display (depending on previous setting);

- press

- press the MENU ESC button briefly to return to the menu screen or give the button a long press to return to the standard screen without storing.

Setting the clock (Set time)

This function allows you to set the clock through two submenus: “Time” and “Mode”.

To carry out the adjustment, proceed as follows:

- briefly press the MENU ESC button and two submenus (Time and Format) are displayed;

– press sub-menus;

- once you have selected a submenu, press MENU ESC briefly;

- if selecting “Time”, briefly press MENU ESC - the “hours” will flash on the display;

- press the adjustment;

- briefly press the MENU ESC button, which makes the display flash the minutes;

- press the adjustment;

- when you select “Mode”, pressing MENU ESC makes the mode flash on the display;

or to make your choice;

or to switch between the two

or button to make the

- press the selection in 24h or 12h mode.

When you have made the required adjustments, press SET ESC to go back to the submenu screen or hold the button down to go back to the main menu screen without saving.

- hold down MENU ESC again to go back to the standard screen or main menu, depending on which point in the menu you have reached.

Set date (Set Date)

This function allows updating of the date (day month - year).

To update, proceed as follows:

- briefly press MENU ESC: the day (dd) will flash on the display;

- press the adjustment;

- briefly press MENU ESC: the month (mm) will flash on the display;

- press the adjustment;

- briefly press MENU ESC: the year (yyyy) will flash on the display;

- press the adjustment.

or button to carry out the

or button to make the

KNOW YOUR VEHICLE

SAFETY

STARTING AND DRIVING

WARNING LIGHTS AND MESSAGES

IN AN EMERGENCY

SERVICING AND MAINTENANCE

TECHNICAL SPECIFICATIONS

INDEX

Note The setting increases or decreases by one unit

KNOW YOUR

VEHICLE

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

each time pressed causes an automatic speed increase/ decrease. Complete the setting by single pressing the button when you approach the required value.

- press the MENU ESC button briefly to return to

SAFETY

the menu screen or give the button a long press to return to the standard screen without storing.

Audio information (See radio)

This function is used to display radio information.

- Radio: selected radio station frequency or RDS message, automatic tuning activation or AutoSTore;

- Audio CD, MP3 CDs: track number;

- CD Changer: CD number and track number; To show the car radio information on the display

(on) or not (off), proceed as follows:

- briefly press MENU ESC: On or Off will flash on the display (depending on previous setting);

- press

- press the MENU ESC button briefly to return to the menu screen or give the button a long press to return to the standard screen without storing.

Automatic central door locking with vehicle running (Autoclose)

After activation (On) this function allows the automatic locking of the doors to be activated when

INDEX

the speed exceeds 20 km/h.

or is pressed. Keeping the button

or to make your choice;

To activate (On) or deactivate (Off) this function, proceed as follows:

- press the MENU ESC button briefly: the display will show a submenu;

- briefly press MENU ESC: On or Off will flash on the display (depending on previous setting);

- press

- briefly press the MENU ESC button to go back to the submenu screen or hold the button down to go back to the main menu screen without saving;

- hold down MENU ESC again to go back to the standard screen or main menu, depending on which point in the menu you have reached.

Setting the unit of measurement

With this function it is possible to set the measurement units through three submenus: “Distance”, “Consumption” and “Temperature”.

To set the desired measurement unit, proceed as follows:

- briefly press MENU ESC to display the three submenus;

- press submenus;

- once the submenu to be modified has been selected, briefly press the MENU ESC button;

- if the submenu “Distances” is entered: by briefly pressing SET ESC the display shows "km" or "mi" depending on the previous setting;

or to make your choice;

or to switch between the three

- press or to make your choice;

- when you select “Consumption”, pressing SET ESC makes km/l, l/100km or mpg appear on the display (depending on the previous setting);

If the set distance unit is "km", the display enables setting of the fuel consumption unit (km/l or l/100km).

If the set distance unit is "mi", the display shows the amount of fuel consumed in "mpg".

- press

- if the submenu “Distances” is entered: by briefly pressing SET ESC the display shows "km" or "mi" depending on the previous setting;

- press When you have made the required adjustments,

press SET ESC to go back to the submenu screen or hold the button down to go back to the main menu screen without saving.

- hold down MENU ESC again to go back to the standard screen or main menu, depending on which point in the menu you have reached.

Selecting the language (Language)

Display messages can be shown in different languages: Italian, German, English, Spanish, French, Portuguese, Turkish and Dutch.

To set the required language, proceed as follows:

- briefly press MENU ESC: the previously set language will flash on the display;

or to make your choice;

- press

- press the MENU ESC button briefly to return to the menu screen or give the button a long press to return to the standard screen without storing.

Adjusting the failure/warning buzzer volume (Alert Volume)

With this function is possible to adjust (to eight levels) the volume of the acoustic signal which sounds in the event of alerts and warning.

To set the desired volume, proceed as follows:

- briefly press MENU ESC: the previously set volume level will flash on the display;

- press the adjustment;

- press the MENU ESC button briefly to return to the menu screen or give the button a long press to return to the standard screen without storing.

Adjusting the button volume (Button Vol.)

This function may be used to adjust (over 8 levels) the volume of the noise made when the MENU ESC,

and buttons are pressed.

To set the desired volume, proceed as follows:

- briefly press MENU ESC: the previously set volume level will flash on the display;

- press the adjustment;

or to make your choice;

or button to make the

KNOW YOUR VEHICLE

SAFETY

STARTING AND DRIVING

WARNING LIGHTS AND MESSAGES

IN AN EMERGENCY

SERVICING AND MAINTENANCE

TECHNICAL SPECIFICATIONS

INDEX

- press the MENU ESC button briefly to return to

KNOW YOUR

VEHICLE

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

the menu screen or give the button a long press to return to the standard screen without storing.

SBR buzzer reactivation (Belt Buzzer)

This function can be displayed only after a Fiat

SAFETY

Dealership has deactivated the SBR system (see “SBR system” in the “Safety” section).

Scheduled Servicing (Service)

This function is used to display information related to regular servicing intervals.

This information can be consulted as follows:

- briefly press MENU ESC: service intervals in km or mi, depending on the previous setting, will be displayed (see “Setting the unit of measurement”);

- press the MENU ESC button briefly to return to the menu screen or hold the button down to return to the standard screen.

Note The “Scheduled Servicing Plan” requires the vehicle to be serviced every 30,000 km (or 18,000 mi). This indication will appear automatically, with the key at MAR, starting from 2,000 km (or 1,240 mi) and will be displayed every 200 km (or 124 mi).

Below 200 km the signals become more frequent. The display will be in km or miles according to the unit of measurement set. When the next service is close, when the ignition is turned ON the word

INDEX

"Service" appears in the display followed by the remaining number of kilometres/miles. Go to a Fiat

Dealership, where the "Scheduled Service Plan" operations will be performed and the message will be reset.

Passenger airbag and side bag activation/ deactivation (Passenger bag)

(for versions/markets, where provided)

This function is used to activated/deactivated the passenger's airbag.

Proceed as follows fig. 14: ❒ press MENU ESC and, after the message BAG P

OFF (to deactivate) or BAG P On (to activate) is displayed by pressing buttons MENU ESC again;

❒ the confirmation request message will appear on

the display;

❒ use the

(to confirm the activation/deactivation) or (No) (to cancel);

❒ press the MENU ESC button briefly; a selection

confirmation message will be displayed after which the program returns to the menu screen. Alternatively, press and hold down the button to return to the standard screen without storing.

Exit menu

This function closes the settings listed on the menu screen. Briefly press MENU ESC to go back to the standard screen without saving. Press to return to the first menu option (Speed Beep).

or menu buttons to select (Yes)

and , press

TRIP COMPUTER

General features

The Trip computer is used to display information on vehicle operation when the ignition key is turned to MAR. This function allows you to define two separate trips, called "Trip A" and "Trip B", for monitoring the "complete mission" (journey) of the vehicle in a reciprocally independent manner. Both functions can be reset (start of a new journey).

“Trip A” is used to display the values relating to: ❒ Outside temperature (for versions with outside

temperature sensor and methane-powered

vehicles)

❒ Range ❒ Distance travelled ❒ Average consumption ❒ Current consumption ❒ Average speed ❒ Travel time (driving time).

"Trip B", available on multifunction display only, is used to display the values relating to:

❒ Distance travelled B ❒ Average consumption B ❒ Average speed B ❒ Travel time B (driving time).

KNOW YOUR VEHICLE

SAFETY

STARTING AND DRIVING

WARNING LIGHTS AND MESSAGES

IN AN EMERGENCY

SERVICING AND MAINTENANCE

TECHNICAL SPECIFICATIONS

INDEX

fig. 14

F0T1028

KNOW YOUR

VEHICLE

reset.

SAFETY

Values displayed

Range

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

Range (for ver sions/markets where provided)

This value shows the distance that the car can still cover before needing fuel, assuming that driving style is unvaried. “----”will appear on the display in the following cases:

❒ range is lower than 50 km (or 30 mi) ❒ vehicle is left parked with the engine running for a

IMPORTANT The range can be affected by several factors: driving style (see “Driving style” in the “Starting and driving” section), type of route (motorway, towns and cities, mountain roads, etc.), conditions of use (load, tyre pressures, etc.). Trip planning must therefore take the above into account.

Distance travelled

This value shows the distance covered from the start of the new journey.

“Trip B” may be disabled (see “Activating Trip B”). “Range” and “Instant consumption" parameters cannot be

long time.

Average consumption

This value shows the approximate average fuel consumption from the start of the new journey.

Current consumption

This value shows the fuel consumption. The value is constantly updated. The message “----” will appear on the display if the vehicle is parked with the engine running.

Average speed

Shows the average speed of the vehicle by using the overall time elapsed since the start of a new journey.

Journey time

Time elapsed since the start of the new journey.

IMPORTANT If there is no information, the Trip computer displays "----" in place of the value. When normal operating conditions are restored, the counting of the various values is resumed, without either zeroing the values displayed prior to the problem, or starting a new journey.

INDEX

ControlTRIP button

The TRIP button, located on the top of the right stalk fig. 15, is used (with ignition key at MAR-ON) to display these values and reset them to start a new mission:

❒ press briefly to display the different values; ❒ long push to reset and then start a new journey.

New mission

This begins after a reset: ❒ “manual” resetting by the user, by pressing the

relevant button;

❒ automatically when the distance travelled reaches

9,999.9 km (miles) or when the journey time reaches 99.59:59 (99 hours and 59 minutes);

❒ disconnection/reconnection of the battery.

IMPORTANT The reset operation when “Trip A” details are being displayed only resets the information associated with this function.

IMPORTANT The reset operation when “Trip B” details are being displayed resets only the information associated with this function.

Start of journey procedure

With ignition key at MAR, press and hold the TRIP button for more than 2 seconds to reset.

Exit Trip

You can automatically exit the TRIP function once all the values have been displayed, or by holding the MENU ESC button down for more than 1 second.

KNOW YOUR VEHICLE

SAFETY

STARTING AND DRIVING

WARNING LIGHTS AND MESSAGES

IN AN EMERGENCY

SERVICING AND MAINTENANCE

fig. 15

TECHNICAL SPECIFICATIONS

INDEX

F0T0038

KNOW YOUR

VEHICLE

SAFETY

SEATS

FRONT SEATS

All adjustments must be made with the vehicle stationary.

WARNING

Once you have released the adjustment

lever, always check that the seat is locked on the guides by trying to move it back and forth. If it is not locked, the seat may move unexpectedly and make you lose control of the vehicle.

STARTING AND

DRIVING

Lengthwise adjustment

Lift lever A fig. 16and push the seat forwards or backwards: in the driving position your arms should

WARNING LIGHTS

rest on the rim of the steering wheel.

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX

fig. 16

Backrest angle adjustment

Turn knob B fig. 16.

Height adjustment (driver only)

(for versions/markets, where provided)

Operate lever C fig. 16 to lift or lower the rear part of the cushion to achieve the most comfortable driving position.

IMPORTANT Adjustment must be carried out only when seated in the relevant seat.

Driver seat lumbar adjustment

(for versions/markets, where provided)

Turn knob D fig. 16 to adjust the backrest support.

F0T0153

+ 201 hidden pages