Fetco HWD-2110TOD User Manual
Whether you need a front of house self serve solution
to prepare coffee, tea, oatmeal, and instant beverages,
or back of house solutions that rely on hot water,
the HWD-2110 is the answer. The newly-designed
hot water dispenser meets FETCO’s exacting standards
of innovation, reliability, durability and quality.
It delivers form, function and flexibility like
no other on the market today.
High-resolution display
provides easy navigation
and instant feedback.
Temperature settings can
be adjusted at the touch of
a button using ergonomic
capacitive touch function
selector technology.
Soft silicone tap is
designed to protect glass
and ceramic serveware
against damage.
Convenient float indicator
is built into drip tray to help
simplify maintenance
and cleaning.
SD card slot allows operator
to easily update software
and maintain optimal
performance.
Four temperature settings
ensure optimal temperature
instantly for a variety
of beverages, soups
and oatmeal.
With TOD (Temperature on
Demand), this streamlined
unit takes the place of up to
four hot water dispensers,
which saves money, space,
equipment and labor.
Water Connection Inlet
1
/
4 inch male flare fitting
Minimum Flow Rate
1
/
1
2 gpm [5.7 lpm]
Water Pressure
40-75 psig [276-517 kPa]
Configuration Code
DOMESTIC & CANADA
H211010
EXPORT & ALL OTHER
H211020
Heater
Configuration
1 x 5.0 kW
1 x 5.0 kW
Voltage
200-240
200-240
Phase
1 [50 or 60Hz]
1 [50 or 60Hz]
Wires
2+G
2+G
KW
3.6-5.1
3.6-5.1
Electrical
Connection
NEMA 6-30P
Cord only
(1)
Max Amp
Draw
17.4-21.0
17.4-21.0
(1) For export and other applications-cord without plug will be attached for appropriate electrical connection by owner.
(2) Ten gallon per hour flow rate based on 65-70°F / 18-21°C water main supply temperature at lowest possible power supply current.
Temperature ranges selectable: 158-203°F / 70-95°C based on 207°F/97°C hot water tank temperature.
Temperature of dispensed hot water may vary up to 3.5% of displayed temperature selection.
Four selectable hot water dispense temperatures. Selectable English and Metric temperature units.
Height
1
/
24
2” [62.0 cm]
Width
10” [25.4 cm]
Depth
1
/
19
2” [49.5 cm]
Empty Weight
30 lbs [13.6 kg]
SIDE VIEW BACK VIEW
19-1/2”
[49.5 cm]
Filled Weight
68.3 lbs [31.0 kg]
10”
[25.4 cm]
Shipping Weight
44 lbs [20.0 kg]
SYMBOLS
Electrical Connector
On / Off Switch
Tank Drain
Water Inlet
Gallon [Liter]/Hour
9.5-13.5 [36.0-51.0]
9.5-13.5 [36.0-51.0]
(2)
(2)
11-19/32”
[29.4 cm]
13-1/8”
[33.3 cm]
5/16”
[0.7 cm]
FETCO® is an active member of
fetco.com 847.719.3000
180.338.2699 USA
847.719.3001
24-1/2”
[62.2 cm]
5”
[12.7 cm]
NEMA PLUGS
CONFIGURATIONS
CUPS PER HOUR*
8oz.
4-15/32”
[11.3 cm]
2-7/32”
12oz.
16oz.
[5.6 cm]
1-3/4”
[4.4 cm]
20oz.
* Approximate based on
maximum power setting.
Food Equipment Technologies Co.
600 Rose Road
Lake Zurich, IL 60047
USA
G
NEMA
6-30P
195
130
98
78
© Copyright 2012 FETCO®, Driven to Innovation™, Dr iven to Pioneer Innovation™
are marks of Food Equipment Technologies Company.
Temperature on Demand and HWD-2100 Series Equipment Utility and Design Patents pending.
SSTOD10812
Loading...