Festool Carvex PSC 400 EB, Carvex PSBC 400 EB Original Operating Manual
PSC 400 EB
1-5
1-2
1-1
PSBC 400 EB
1-6
1-7
1-8
1-91-101-111-12
1-51-3 1-4
1-2
1-1
1
1-6
1-7
1-8
1-91-101-111-12
klick
2
3
4 mm
96 mm
3-1
4-1
4-2
4-3
4
5
5-1
5-2
4-4
1.
2.
ca. 3 mm
6
6-1
6-2
6-3
CARVEX
GB
Original operating manual
1 Symbols .................................. 15
2 Machine features ...................... 15
3 Intended use............................ 15
4 Technical data .......................... 15
5 Safety instructions .................... 16
6 Operation ................................ 17
7 Settings................................... 18
8 Working with the machine.......... 19
9 Service and maintenance ........... 20
10 Accessories .............................. 21
12 Disposal .................................. 22
13 Warranty ................................. 22
14 EU Declaration of Conformity...... 22
The illustrations specified are located at the beginning and end of the operating manual.
1Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear a dust mask.
Wear ear protection.
Wear protective goggles.
Wear protective gloves.
Do not throw in the household waste.
2 Machine features
[1-1] Chip guard
[1-2]
[1-3]
[1-4]
[1-5]
[1-6]
[1-7] Extractor connector
[1-8] Saw table change lever
[1-9] Saw blade ejection
[1-10]Replaceable saw table
[1-11]Pendulum stroke switch
[1-12]Base runner
On/Off switch
Variable speed trigger (only PSBC 400 EB)
Switch lock (only PSBC 400 EB)
Adjusting wheel for stroke speed control
Buttons for releasing the battery pack
3Intended use
Jigsaws are designed for sawing wood and similar materials similar to wood. With the special
saw blades offered by Festool, these machines
can also be used for sawing plastic, steel, aluminium, non-ferrous metal and ceramic plates.
The charger TRC 3 is designed for charging the
battery packs listed.
The user bears the responsibility for damage and accidents caused by improper
use.
4 Technical data
Cordless jigsaws PSC 400 EB PSBC 400 EB
Motor voltage 10.8 - 18 V
Stroke speed 1500 - 3800 rpm 1000 - 3800 rpm
Stroke length 26 mm
Pendulum stroke 4 steps
max. inclination (only with accessory
angle table WT-PS 400)
max. cutting depth (depending on saw blade)
Wood 120 mm
Aluminium 20 mm
Steel 10 mm
Weight without battery pack 1.8 kg
Safety class /II
45° to both sides
15
Loading...