ETA ETAPD8LA Users Manual

ETA-PD8LA

AC Power Conditioner & Distribution Unit

ETA-PD8LA

AC Power Conditioner & Distribution Unit

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: [phone] • Fax: [phone]

– 1 – ETAsys.com

Specifications are subject to change without notice.

ETA-PD8LA

AC Power Conditioner & Distribution Unit

TABLE OF CONTENTS

Important Safety Instructions .................................................................................................................. 3

Introduction ........................................................................................................................................... 5

Key Features and Applications ............................................................................................................... 6

Front Panel Description ........................................................................................................................... 7

Rear Panel Description ............................................................................................................................ 8

Installation .............................................................................................................................................. 9

AC Power Cord Retainer System ........................................................................................................... 9

Specifications ....................................................................................................................................... 11

Warranty ................................................................................................................................................ 12

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: [phone] • Fax: [phone]

– 2 – ETAsys.com

Specifications are subject to change without notice.

ETA-PD8LA

AC Power Conditioner & Distribution Unit

IMPORTANT SAFETY INSTRUCTIONS

The lightning flash with arrowhead symbol within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage “ within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this device near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other device (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the

other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your

safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they

exit from the device.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the device. When a cart is used,

use caution when moving the cart/device combination to avoid injury from tip-over.

13. Unplug this device during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as

liquid has been spilled, or objects have fallen into the device, the device has been exposed to rain or moisture, does not operate

normally, or has been dropped.

15. WARNING: To reduce the risk of fire or electric shock, this device should not be exposed to rain or moisture and objects filled with

liquids, such as a vase, should not be placed on this device.

16. To completely disconnect this equipment from the mains, disconnect the power supply cord plug from the receptacle.

17. The mains plug of the power supply cord shall remain readily operable.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: [phone] • Fax: [phone]

– 3 – ETAsys.com

Specifications are subject to change without notice.

ETA-PD8LA

AC Power Conditioner & Distribution Unit

WHEN THE DEVICE IS IN USE

WARNING

• To prevent electric shock, do not remove the product cover as there are high voltage components inside. Refer all servicing to

ETA Systems.

• Should any of the following irregularities occur during use, immediately switch off the power, disconnect the power cord from the

AC outlet and contact ETA Systems. Do not to attempt to continue operation with the product as this may cause fire or electric

shock:

• Smoke or strange smell coming from the unit.

• If the product falls or the case is damaged.

• If water or any metallic objects falls into the product.

• If the power supply cord is damaged in any way.

• If the unit is malfunctioning.

• Do not insert or drop metallic objects or flammable materials into the ventilation holes of the product's cover, as this may result in

electric shock or fire.

• Do not place any containers with liquid or metallic objects on the top of the product. If any liquid spills into the unit, fire or electric

shock may result.

• Never operate this product or touch the power supply cord during an electrical storm, electric shock may result.

• Never exceed the power rating on the product when connecting equipment. Fire and/or property damage may result.

• Operate the product only with the voltage specified on the unit. Fire and/or electric shock may result if a higher voltage is used.

• Do not modify, kink, or cut the power cord. Do not place the power cord in close proximity to heaters and do not place heavy objects

on the power cord, including the product itself, doing so may result in fire or electrical shock.

• Ensure that the safety ground terminal is connected to a proper ground. Never connect the ground to a gas pipe as a catastrophic

disaster may result.

• Be sure the installation of the product is stable, avoid slanted surfaces as the product may fall and cause

injury or property damage.

WHEN INSTALLING THE PRODUCT

• Plugging in or unplugging the power cord with wet hands may result in electric shock.

• Never move the unit with the power cord plugged into the wall, as damage to the power cord may result.

• When unplugging the cord from the wall, grasp the plug, NOT the cord.

• Never install this product in humid or dusty locations, nor in direct sunlight, near sources of heat, or in areas where sooty smoke or

steam are present. Fire and electric shock may result.

• Keep all sides of the unit at least 31⁄2" away from objects that may obstruct air flow to prevent the unit's internal temperature rise.

WHEN THE PRODUCT IS IN USE

• Never place heavy objects on the product, causing it to fall and/or break, resulting in personal injury and property damage. In

addition, the product itself may fall and cause injury and property damage.

• Contact ETA Systems for instructions on cleaning the inside of the unit. Large accumulations of dust inside the unit may result in heat

buildup and fire.

• Ensure that the power supply plug is securely plugged into the wall outlet. Never allow dust to accumulate on the power plug or

inside the wall outlet.

• When cleaning the unit or the unit is not to be operated for an extended period, unplug the power cord from the wall.

CAUTION

CAUTION

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: [phone] • Fax: [phone]

– 4 – ETAsys.com

Specifications are subject to change without notice.