ETA ETAPD8LA Datasheet

ETA-PD8LA

AC Power Conditioner

& Distribution Unit

KEY FEATURES

• 9 Total Outlets

• 7 Rear Panel Switched Outlets

• 1 Rear Panel Unswitched Outlet

• 1 Front Panel Unswitched Outlet

• RFI Noise Filtering to Reduce Radio Frequency Interference

• EMI Filtering to Reduce Electromagnetic Interference

• Circuit Breaker Protection @ 15A

• Spike Suppression up to 6000V

• AC Fault Indicator

• Ground Status Indicator

• Removable IEC Power Cord with Retainer Bracket

• Front Panel Pull Out LED Lamp

APPLICATIONS

The ETA-PD8LA was designed to be flexible with features that allow it to

be used in a variety of applications. The ETA-PD8LA can be used solely

for protection against voltage surges or for AC distribution. If fuzzy video

or frequent static pops occur, the AC power conditioning may eliminate

or reduce those inconveniences. The following are just a few examples

of applications where the ETA-PD8LA can be used:

• Restaurants

• Houses of Worship

• Schools

• Home Theaters

• Office Buildings

• Sports Bars

GENERAL DESCRIPTION

The ETA-PD8LA features noise filtering for unwanted Radio Frequency

Interference (RFI) that is commonly introduced into AC lines by nearby

radio transmitters or wireless products. EMI filters are incorporated to

reduce noise from Electromagnetic Interference (EMI) from such items

as electric motors and switching power supplies. The benefit of these

filters can be seen on video products or audibly by reducing static pops

and external signal interference.

The ETA-PD8LA is unique in that the integrator can select the power cord

length that is required for the installation. A removable 12' IEC power

cord with a retainer bracket is supplied with the unit. A shorter or longer

cord can be purchased separately if needed.

Unstable AC Mains voltage is one of the main reasons for equipment

failure. The amount of energy that can be injected into the power

system can be immense with voltages reaching 6kV or amperage peaks

of 3000A. These spikes are very fast and usually only last for a very

short period of time. The ETA-PD8LA’s circuitry is very fast and can

suppress unwanted energy within a nanosecond response and sustain

the suppression up to 2 milliseconds, thus ensuring virtually trouble

free protection. The front panel also features AC fault and ground status

indicators providing quick, visual reassurance the equipment is safe.

ETAsys.com

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

1/2

ETA-PD8LA

Conditioned Power

Distribution Unit

SPECIFICATIONS

Type Power Power Conditioner & Suppressor

Load Rating 15A

Safety Listings ETL (UL 60065 Standard)

Front Panel

Outlets 1 Unswitched

Activation Switch Rocker with Security Cover

Indicators AC Power On, Outlets Active, AC Fault, Ground

Lights 1 Pull Out Lamp with Dimmer

Rear Panel

AC Outlets 8 Outlets Total, 7 Switched & 1 Unswitched

AC Mains IEC Power Socket 15A 1800W

Circuit Breaker 15A Resettable

Technical Data

Max AC Mains Current 15A AC Mains Breaker

Operating Voltage 102VAC - 132VAC

Power Consumption 6 Watts

Min. Spike Clamping Voltage 460 VRMS @ 3,000A

Max. Spike Clamping Voltage 6kV

Max. Spike Clamping Resp. Time 1 nanosecond

Spike Clamping Voltage @ 100A 1250Vp for 20μs

Maximum Surge Current 6,500A

Energy Rating @ 2ms 200 Joules

Noise Attenuation RFI 10dB @ 10kHz 40dB @ 100kHz 100dB @ 10MHz

Temperature Range 5° to 35°C

Humidity Range 5% to 95% Relative Humidity

Mechanical

Chassis Finish Black

Mounting Rack Mount, 19", 1 RU

Height 1.75" (1RU, 44.5mm)

Width 19" (482.6mm)

Depth 5" (127mm)

Weight 5 lbs (2.27kg)

In the Box

Manual

IEC Power Cord 14 Gauge 12' (4M)

IEC Power Cord Retainer Bracket

ARCHITECT & ENGINEER SPECIFICATIONS

Power conditioner shall be ETA Systems model ETA-PD8LA. Power conditioner shall have 9 total outlets, 8 rear panel outlets (7 switched and 1 unswitched) and 1 front panel, unswitched outlet. Power conditioner shall include Radio Frequency and Electromagnetic filtering to reduce noise in AC lines. Power conditioner shall have circuit breaker protection at 15A. Finish shall be textured black epoxy and dimensions shall be 19"W x 5"D x 1.75"H (482.6mm x 127mm x 44.5mm) to mount into 1RU of space.

ETAsys.com

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

2/2