Epson WorkForce WF-2750 Quick Guide and Warranty

WF-2750

English

Quick Guide

This guide includes basic information about your product and troubleshooting tips. See the resources below for additional information.

Support

Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) where you can download drivers, view manuals, see FAQs, view videos, or e-mail Epson support.

User’s Guide

See the online User’s Guide for detailed information on using your product, including these features:

• Connect wirelessly from your smartphone, tablet, or computer. Print documents and photos from across the room or around the world with Epson Connect Apple, Android

• Easily set up networking—Wi-Fi and Wi-Fi Direct

• Copy, scan, and fax directly from the control panel.

• Save paper and power with ECO mode.

, and GoogleTM printing services.

Videos

Visit www.epson.com/support/wf2750videos (U.S.) or www.epson.ca/support/wf2750videos (Canada)to view a variety of support videos

for your product.

Using the Control Panel

Turn on or off

Return to home screen

Redial or pause fax operation

Navigate

Stop current

Return to previous screen

Browse fax contacts

Start printing, copying, scanning, or faxing

Scroll to see more menu items

Indicates home screen

The keypad allows you to use all the features of your product. To save energy, the screen turns off after several minutes of inactivity. Press any button to wake it up.

You may see the following icons on the screen:

The product is connected to a wireless network.

The product is connected using Wi-Fi Direct.

A document is loaded in the automatic document feeder (ADF).

Navigating the home screen

Press u or d to scroll through menu items, then press

2 Using the Control Panel

OK to select one.

Selecting settings and options

Scroll to see more settings

Displays the selected option for the current setting

Return to the previous menu

u or d to select the

option

Use the following controls to navigate the product’s settings menus:

Press u or d to scroll through menu items, then press to the previous menu.

Press u or d to scroll through the options, then press return to the previous menu.

OK to select one. Press to return

OK to select an option. Press to

Using the Control Panel 3

Setting Up Wi-Fi from the Control Panel

The software installer may automatically set up your wireless connection. If it doesn’t, you can connect to your wireless network using the product’s control panel.

1. Press , if necessary.

2. Press u or d, select

You see this screen:

Wi-Fi Setup, and press OK.

3. Select

4. Select the name of your wireless network from the list and press

Wi-Fi Setup Wizard and press OK.

OK.

5. Enter your wireless password using the numeric keypad.

Note: If your password contains uppercase or lowercase letters, make sure to enter them correctly.

■ Press a button on the keypad repeatedly to scroll through characters (uppercase,

lowercase, or numbers).

■ Press r to move to the next character.

■ Press l to delete incorrect characters.

6. Press

7. Confirm the displayed network settings and press

OK when you finish entering your password.

OK to save them.

Note: If you need to change a setting, press .

8. If you want to print a network setup report, press one of the Start buttons. Otherwise, press

OK.

If the network connection is successful, the icon appears in the corner of the LCD screen.

4 Setting Up Wi-Fi from the Control Panel

Copying

ADF

Scanner glass

You can copy documents or photos onto various sizes and types of paper from the product’s control panel.

1. Place your original document or photo on the scanner glass, or place multi-page documents face-up in the ADF.

2. Load the paper you want to print on.

3. Press , if necessary.

4. Press d, select

5. Press a number button on the keypad or u or d to select the number of copies you want to print.

Copy, and press OK.

6. To make a copy with the current settings, press one of the and change the copy settings, press

OK.

Start buttons. To view

Copying 5

7. Press u or d, select the copy setting you want to change, and press OK.

8. Press u or d to change the setting, then press

9. When you are ready to copy, press one of the

OK.

Start buttons.

Enlarging or Reducing a Document or Image

You can increase or decrease the size of the image or document with the Zoom setting in the copy settings menu.

1. Follow the steps in “Copying” on page 5 to insert your original and access the copy menu.

2. Press

3. Press d, select

OK to open the copy settings menu.

Zoom, and press OK.

4. Press u or d to select the setting that you want:

■ Custom Size automatically adjusts the size by the percentage that you select

■ Actual Size copies the image or document in its current size

■ Auto Fit Page automatically adjusts the size of the image or document to fit the

loaded paper

■ Legal -> Letter resizes any legal-size document to letter size

5. Press

OK.

6. When you are ready to copy, press one of the Start buttons.

6 Enlarging or Reducing a Document or Image

Maintaining Your Product

Nozzles are clean

Nozzles need cleaning

If your printouts become too light, or you see dark or light bands across them, you may need to clean the print head nozzles.

Cleaning uses ink, so you can check for clogged nozzles before you clean them so you don’t clean them unnecessarily.

Note: You cannot clean the print head if an ink cartridge is expended, and may not be able to clean it when a cartridge is low. You must replace the cartridge first.

Running a Nozzle Check and Cleaning the Print Head

1. Load a few sheets of plain paper in the product.

2. Press u or d, select

Setup, and press OK.

You see this screen:

3. Press d, select

4. Select

Print Head Nozzle Check and press OK.

5. Press one of the

Maintenance and press OK.

Start buttons to print the nozzle check pattern.

6. Check the printed pattern to see if there are gaps in the lines.

7. If there are no gaps, select

If there are gaps or you can’t see the pattern, press d to select and press OK.

Finish and press OK.

Clean the print head

Maintaining Your Product 7

8. Press one of the Start buttons to print the nozzle check pattern.

The power light flashes throughout the cleaning cycle and stays on when the cleaning cycle is finished.

Caution: Never turn off the product during a cleaning cycle or you may damage it.

9. When the cleaning cycle is finished, press OK to print a nozzle check pattern to confirm that the print head is clean. Repeat the cleaning process if necessary.

If you don’t see any improvement after cleaning the print head up to 4 times, leave the product turned on and wait at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced.

Solving Problems

If you have a problem with your Epson® product, check the messages on the LCD screen to diagnose the cause of most problems.

You can also check the basic troubleshooting suggestions below. For more in-depth troubleshooting, see your online User’s Guide or FAQs at www.epson.com/support (U.S.) or www.epson.ca/support (Canada).

Network Problems

■ Try connecting to the wireless router or access point with your computer or another

device to confirm that it is working correctly.

■ Try restarting the router (turn it off and then on), then try to connect to it again.

■ Verify that the network settings are correct and check the signal strength. If it is poor,

try moving the product closer to your router or access point.

■ When using TCP/IP, make sure your network’s DHCP option is enabled (your router

manufacturer will be able to assist you with this setting).

■ Print a network status sheet from the product’s control panel. Press if necessary and

select

Setup > Network Settings > Network Status > Print Status Sheet. Then

press one of the

■ Remove and reinstall your product software.

Start buttons.

8 Solving Problems

+ 16 hidden pages