Epson WorkForce ET-2750U Start Guide

Start Here

IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User’s
Guide.

Note: As part of the ReadyPrint™ program, Epson monitors ink usage

remotely to provide you with additional ink before you run out of it. The
product must be connected to the internet to function and monitor ink
usage.

1

Unpack

ET-2750U

2

Fill ink tanks

Warning: Keep the ink bottles out of the reach of children and do not

drink the ink.

Caution: This product requires careful handling of ink. If ink spills,

wipe it off immediately with a damp towel to avoid permanent stains.
If ink gets on your clothes or belongings, it may not come off.

Note:

• Use only the Epson 570 ink provided to you under the ReadyPrint
program.

• Use the ink bottles included with the printer to set up the product.
Part of the ink will be used to charge the print head. These bottles
may print fewer pages compared with replacement ink bottles.

1 Open the ink tank cover, then open the cap for the black

ink tank.

6 Close the ink tank cap.

7 Repeat the previous steps for the other colors.

Caution: After setup, periodically inspect the ink level to ensure

it is not below the lowest line on the tank. Prolonged use when
ink is below the lowest line could damage the product. See the
online User’s Guide for refilling instructions.

8 Close the ink tank cover and then the scanner unit.

13 When the message to start initialization appears on the

LCD screen, press the
the ink. Ink charging takes approximately 10 minutes. A
message appears when ink charging is complete. Press
the OK button to continue.

Caution: Do not turn off the product, raise the scanner unit, or

load paper while the product is charging or you’ll waste ink.

Note: The included ink bottles are designed for reliable printer

setup and cannot be resold. After setup, the remaining ink is
available for printing.

start button to start charging

Note: Do not open the ink bottles until you are ready to fill the ink

tanks. The ink bottles are vacuum packed to maintain reliability.

1 Remove all protective materials from the product.

2 Lift up the scanner unit. Remove all protective materials

from inside the product.

2 Unpack the black (BK) ink bottle.

Hold the ink bottle upright and
slowly turn the bottle cap to
remove it.

Caution: Do not shake or squeeze

the ink bottles. Do not touch the top
of the ink bottle after its cap is removed.

3 Insert the ink bottle into the filling port, as shown below.

Note: Refer to the color-coded sticker to identify the color of

each tank. Do not force the bottles into position; they are keyed
for each color.

4 Wait for the ink to fill the tank.

Do not squeeze the bottle. Ink
flows into the tank and stops
automatically when the ink is
filled to the upper line.

Note: If ink does not flow from the

bottle, lift and reinsert the bottle.

9 Connect the power cord to the back of the product and to

an electrical outlet.

Caution: Do not connect to your computer yet.

10 Raise the control panel, then press the power button to

turn on the product.

Note: If an error message appears, turn off the product and

check that no protective material has been left inside the product.

11 Press or to select your language on the LCD screen,

then press the OK button.

Note: You can change this setting later using the product’s

control panel. For more information, see the online User’s Guide.

Follow steps 12 and 13 to continue ink charging.

14 To complete filling the ink tanks, repeat steps 1 through 7

using the remaining ink in the bottles.

Note: Replace the bottle cap before disposing of the bottles.

15 Close the ink tank cover and scanner unit.

16 Select Maintenance > Reset Ink Levels, then follow the

on-screen instructions to reset the ink levels.

17 Follow the on-screen instructions to adjust the print

quality. Press the OK button to continue.

Note:

• You need to load paper before you can adjust the print quality. See
“Load paper” on the back of this sheet for details.

• You can change these settings later using the product’s control
panel. For more information, see the online User’s Guide.

3

Load paper

See the online User’s Guide for information about loading
capacity, available paper types and sizes, and loading
envelopes.

1 Make sure the product is not charging ink. Then flip the

feeder guard forward, raise the paper support, and tilt it
backwards slightly.

Caution: Do not touch the flat white cable or the ink tubes and

their translucent cover.

5 When the ink tank is full, remove the ink

bottle and replace the ink bottle cap. Place the
remaining ink aside; you will need it later.

Note: Do not leave the ink bottle inserted;

otherwise the bottle may be damaged or ink
may leak.

12 When the message to see the Start Here sheet appears

on the LCD screen, press the OK button. On the next
screen, press and hold the help button for 3 seconds.

2 Slide the edge guides all the way out.

3 Load paper, glossy or printable side up and short edge

first, in the middle of the rear paper feed slot.

Mobile and voice-activated

Any questions?

Declaration of Conformity

4 Slide the edge guide against the paper, but not too tightly.

5 Pull out the output tray.

6 Select the paper settings on the product’s control panel.

4

Install software

Note: An Internet connection is required to obtain the product

software.

1 Make sure the product is NOT CONNECTED to your

computer.

printing

• Print directly from your smartphone or tablet using iOS or
Android™ with Epson iPrint™. Simply connect your printer
and device to the same network and tap the action icon to
select the print option.

• Print directly from your Android (v4.4 or later) device*.
Simply connect your printer and device to the same network
and tap the menu icon to select the print option.

• Print from wherever you are, next to your printer or
remotely, with Epson Connect™. Learn more at
www.epson.com/connect.

• Use voice-activated assistants to print a variety of creative
and everyday items from your Epson® product. Simply
add your product to an Epson Connect account, then
link the account to a voice-activated assistant. See
www.epson.com/voice for more information.

* May require the Epson Print Enabler or Mopria Print Service app from

Google Play™.

Any problems?

Network setup was unsuccessful.

• Make sure you select the right network name (SSID).

• Restart your router (turn it off and then on), then try to
connect to it again.

• The printer can only connect to a network that supports

2.4 GHz connections. If your router offers both 2.4 GHz and
5 GHz connections, make sure 2.4 GHz is enabled.

• If you see a firewall alert message, click Unblock or Allow
to let setup continue.

• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. Be sure to enter your password in the correct
case.

User’s Guide

Windows: Click the icon on your desktop or Apps screen to

access the online User’s Guide.

Mac: Click the icon in Applications/Epson Software/Guide to
access the online User’s Guide.

If you don’t have a User’s Guide icon, go to the Epson website,
as described below.

Videos

Visit www.epson.com/support/et2750uvideos to view
support videos.

ReadyPrint subscription program technical
support

Visit www.epson.com/support/et2750u to download drivers,
view manuals, get FAQs, or contact Epson.

Call 800-879-3776, 6
Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and
hours of support are subject to change without notice. Toll or
long distance charges may apply.

am to 8 pm Pacific Time, Monday through

Recycling

Epson offers a recycling program for end of life your ink bottles.
Please go to www.epson.com/recycle for information on how
to return your ink bottles for proper disposal.

Need paper?

Ensure brilliant results with Epson specialty
and plain papers, engineered specifically for
Epson printers. Find Epson papers and Epson
Genuine Ink at www.epson.com and at
Epson authorized resellers. Call
800-GO-EPSON (800-463-7766).

According to 47CFR, Part 2 and 15 for Class B Personal
Computers and Peripherals; and/or CPU Boards and Power
Supplies used with Class B Personal Computers:

We: Epson America, Inc.
Located at: 3840 Kilroy Airport Way, MS 3-13,
Long Beach, CA 90806-2469
Telephone: [phone]

Declare under sole responsibility that the product identified
herein, complies with 47CFR Part 2 and 15 of the FCC rules as
a Class B digital device. Each product marketed, is identical
to the representative unit tested and found to be compliant
with the standards. Records maintained continue to reflect the
equipment being produced can be expected to be within the
variation accepted, due to quantity production and testing on
a statistical basis as required by 47CFR §2.906. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.

Trade Name: Epson
Type of Product: Multifunction printer
Model: C634A
Marketing Name: ET-2750U

Windows®: If you see a Found New Hardware screen, click

Cancel and disconnect the USB cable.

2 Download and run your product’s software package:

www.epson.com/support/et2750u

3 Follow the instructions on the computer screen to run the

setup program.

4 When you see the Select Your Connection screen, select

one of the following:

• Wireless connection

In most cases, the software installer automatically
attempts to set up your wireless connection. If setup
is unsuccessful, you may need to enter your network
name (SSID) and password.

• Direct USB connection

Make sure you have a USB cable (not included).

• Print a network connection report to identify network
problems and solutions. See your online User’s Guide for
instructions.

There are lines or incorrect colors in my printouts.

Run a nozzle check to see if there are any gaps in the printout.
Then clean the print head, if necessary. See the online User’s
Guide for more information.

The product’s screen is dark.

Make sure your product is turned on, and press any button to
wake it from sleep mode.

EPSON is a registered trademark, EPSON Exceed Your Vision is a registered logomark, and
Epson Connect and Epson iPrint are trademarks of Seiko Epson Corporation.

ReadyPrint and Designed for Excellence are trademarks of Epson America, Inc.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other
countries.

Mac is a trademark of Apple Inc., registered in the U.S. and other countries.

Android and Google Play are trademarks of Google LLC.

General Notice: Other product names used herein are for identification purposes only and may
be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

© 2020 Epson America, Inc., 2/20

Printed in XXXXXX CPD-58686