Epson Viewer P-2000 User Manual

®
User’s Guide
ii
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or
by any means,
electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized m
odifications, repairs,
or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and
maintenance
instructions.
Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable p
roducts other
than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from th
e use of any
interface cables other than those designated as Epson Approved Products by Seiko Epson Corporation.
EPSON
®
is a registered trademark and EPSON Stylus™ is a trademark of Seiko Epson Corporation.
Copyright 2002 Seiko Epson Corporation. All rights reserved. USB DIRECT-PRINT™ is a trademark of Seiko Epson Corporation. The U
SB
DIRECT-PRINT logo is a trademark of Seiko Epson Corporation.
Microsoft
®
and Windows® are registered trademarks of Microsoft Corporation.
Apple
®
and Macintosh® are registered trademarks of Apple Computer, Inc.
SD™ is a trademark.
QuickTime and the QuickTime logo are trademarks used under license. The QuickTime logo is registered in the U.S. and other coun
tries.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
Copyright © 2004 by Seiko Epson Corporation, Nagano, Japan
iii
Contents
Chapter 1 Introduction
Main Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . .2
Warnings, Cautions, and Notes . . . . . . . . . . . . . . . . .2
When using P-2000. . . . . . . . . . . . . . . . . . . . . . . . . . . .2
When using the battery . . . . . . . . . . . . . . . . . . . . . . . .3
When Storing the batteries . . . . . . . . . . . . . . . . . . . . .4
When Disposing of the batteries . . . . . . . . . . . . . . . .4
When using the AC adapter . . . . . . . . . . . . . . . . . . . .5
When using a memory card . . . . . . . . . . . . . . . . . . . .7
When using the LCD . . . . . . . . . . . . . . . . . . . . . . . . . .7
When storing, maintaining, or transporting P-20007
Safety information for United Kingdom users . . . .8
For United Kingdom, Hong Kong, and Singapore us-
ers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Chapter 2 Getting Started
Unpacking Your P-2000. . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Setting Up the P-2000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Charging the battery . . . . . . . . . . . . . . . . . . . . . . . . .12
Turning the power on . . . . . . . . . . . . . . . . . . . . . . . .14
Turning the power off . . . . . . . . . . . . . . . . . . . . . . . 16
Holding the button operations . . . . . . . . . . . . . . . . 17
How to use the Home screen. . . . . . . . . . . . . . . . . . 17
About the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Chapter 3 Using Memory Cards
Setting and Removing a Memory Card . . . . . . . . . . . . . . 19
Available types of memory cards . . . . . . . . . . . . . . 19
Setting a memory card into the CF Card slot . . . . 20
Removing a memory card from the CF Card slot 20
Setting a memory card into the SD Card slot . . . . 21
Removing a memory card from the SD Card slot 21
Copying Data from a Memory Card to P-2000. . . . . . . . 22
Chapter 4 Viewing and Playing Data
Viewing Images. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Available types of image data . . . . . . . . . . . . . . . . . 24
How to see the screen . . . . . . . . . . . . . . . . . . . . . . . . 25
Displaying images. . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Displaying images as a slide show . . . . . . . . . . . . . 29
Playing Videos/Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
iv
Available types of video/audio data . . . . . . . . . . . 30
Playing videos/audio with P-2000 . . . . . . . . . . . . . 32
Using buttons while playing videos/audio. . . . . . 32
Chapter 5 Managing Data
Using the Albums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
About the PC_DATA folder. . . . . . . . . . . . . . . . . . . 34
Copying the favorite data to an album. . . . . . . . . . 35
Creating a new album . . . . . . . . . . . . . . . . . . . . . . . . 37
Changing an album’s name . . . . . . . . . . . . . . . . . . . 38
Deleting an album . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Setting an album shortcut. . . . . . . . . . . . . . . . . . . . . 40
Deleting Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Protecting Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Setting an Album/Folder Thumbnail. . . . . . . . . . . . . . . . 43
Using the Pop Up Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Settings available in the pop up menu . . . . . . . . . . 44
Chapter 6 Direct Printing
Preparing to Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Supported printers. . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Available types of paper . . . . . . . . . . . . . . . . . . . . . . 46
Connecting P-2000 to a printer . . . . . . . . . . . . . . . . 46
Printing Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Printer settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Set print quantities. . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Chapter 7 Using P-2000 With Other Devices
Using P-2000 With a Computer . . . . . . . . . . . . . . . . . . . . 51
Connecting P-2000 to a computer. . . . . . . . . . . . . . 51
Disconnecting P-2000 from a computer. . . . . . . . . 53
Using A/V Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Chapter 8 Customizing Settings
Changing the P-2000 Settings . . . . . . . . . . . . . . . . . . . . . . 55
Chapter 9 Operating the Software
System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
For Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
For Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
About the Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
For Windows users. . . . . . . . . . . . . . . . . . . . . . . . . . 58
For Macintosh users . . . . . . . . . . . . . . . . . . . . . . . . . 59
Starting the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
For Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
For Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Uninstalling the Software . . . . . . . . . . . . . . . . . . . . . . . . . 60
Finding More Information. . . . . . . . . . . . . . . . . . . . . . . . . 60
v
Chapter 10 Maintenance and Troubleshooting
Cleaning the P-2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Error messages/Icons . . . . . . . . . . . . . . . . . . . . . . . .61
Problems and solutions . . . . . . . . . . . . . . . . . . . . . . .62
Power supply problems . . . . . . . . . . . . . . . . . . . . . .63
Viewing and playing problems . . . . . . . . . . . . . . . .63
Data operation problems. . . . . . . . . . . . . . . . . . . . . .64
Printing problems. . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Resetting P-2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Contacting Customer Support . . . . . . . . . . . . . . . . . . . . . .65
For users in Hong Kong . . . . . . . . . . . . . . . . . . . . . .66
Appendix A Appendix
Standards and Approvals . . . . . . . . . . . . . . . . . . . . . . . . . .67
P-2000 (Model: G941A) . . . . . . . . . . . . . . . . . . . . . . .67
AC adapter (Model: A351H). . . . . . . . . . . . . . . . . . .67
Battery (Model: EU-97) . . . . . . . . . . . . . . . . . . . . . . .68
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
About Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . .70
vi
Introduction 1
1
1
1
1
1
1
1
1
1
1
Chapter 1
Introduction
Main Features
With P-2000, you can easily view, keep, and print
images you have taken with a digital camera. You can
also play videos and audio. The main features are
described below.
Epson Photo Fine is a high-resolution liquid crystal display. You can view images easily in high resolution anywhere, anytime without a computer or other special device.
You can play videos and audio easily anywhere,
anytime without a computer or other special device.
You can print images directly to your Epson
printer that supports USB DIRECT-PRINT.
You can save images, videos, and audio in P-2000.
Note:
Do not expose the P-2000 to severe impact, doing so
may cause malfunctions especially during turning operations.
We strongly recommend you back up files stored on the
HDD to another storage device periodically.
Epson is not liable for any problems resulting from the
loss or corruption of data on the HDD.
2 Introduction
Important Safety Instructions
Read all of these instructions before using P-2000, and keep this guide handy for later reference. Follow all warnings and instructions marked on P-2000 and the options.
Warnings, Cautions, and Notes
w
Warnings
must be followed carefully to avoid bodily injury.
c
Cautions
must be observed to avoid damage to your equipment.
Notes
contain important information and useful tips on the operation of your product.
When using P-2000
Follow all warnings and instructions marked on
this product.
Use only AC adapter model A351H and Li-ion
battery model EU-97 with this product.
When connecting this product to a computer or
other device with a cable, ensure the correct orientation of the connectors. Each connector has only one correct orientation. Inserting a connector in the wrong orientation may damage both devices connected by the cable.
Do not insert objects into the slots or openings on
this product.
Do not touch the components inside this product
unless instructed to do so in the user documentation. Never force this product’s components into place. Although this product is designed to be sturdy, rough handling can damage it.
Never spill liquid onto this product.
If this product emits unusual noises, odors, or
smoke, cancel the current operation and turn it off immediately. Remove the battery and disconnect the AC adapter from the product, then unplug the AC adapter from the power outlet. Contact our Customer Support.
To prevent fire or electric shock, do not cover this
product with a blanket or other covering that may give off a static electric shock.
Introduction 3
1
1
1
1
1
1
1
1
1
1
To prevent fire or electric shock, do not expose
this product or its options to rain or moisture.
To prevent fire or explosion, do not use this product where flammable or volatile gas is stored.
Do not use this product outdoors during a
thunderstorm.
Do not use this product after moving it between
extreme temperatures, which may cause condensation to form on electronic parts.
When using the battery
If battery acid gets into your eyes or on your skin,
immediately rinse the affected area thoroughly with water and seek medical treatment. If a battery is swallowed, seek medical treatment immediately.
Use only an Epson Li-ion battery for P-2000
according to the directions in the user documentation.
Use only AC adapter model A351H and P-2000
(Model G941) to charge batteries.
Do not use the battery that comes with this
product for other devices.
To protect against short-circuiting, do not remove
the outside case of the battery.
Do not handle the battery with wet hands or use
them near water.
Do not expose the battery to water or high humidity.
Do not drop, puncture, disassemble, mutilate, or
short-circuit the battery.
Do not place the battery near or into fire or water.
Do not use batteries that are leaking or damaged
in any way.
Do not charge the battery on devices except this
product.
Do not charge the battery near open flame or in very hot locations.
Keep batteries away from heat sources.
4 Introduction
Do not leave the battery in a vehicle to prevent the
battery from overheating.
Do not insert objects into any openings as they may touch dangerous voltage points or short-circuit components.
Prevent the battery from coming into contact with
metal objects that could short-circuit it, such as coins or keys.
Do not insert the battery into power outlets or
other power sources such as car cigarette lighter sockets.
Do not solder wires or terminals directly to the
battery.
Do not touch battery terminals.
Keep batteries away from open flame if they leak
or smell strange.
If overheating, discoloration, or distortion occur,
remove the battery from this product and do not use it.
Charge the battery before using it if it has not been
used for a long period.
When Storing the batteries
When not using this device for a long period,
remove the batteries from this product and store them separately.
Do not store batteries where the temperature or
humidity is very high.
Store batteries out of children’s reach.
When Disposing of the batteries
Before disposing of batteries, make sure you discharge them completely.
w
Warning:
Be sure to securely cover the all end of the battery
with tape to prevent combustion or explosion when disposing.
Do not dispose of batteries as ordinary refuse.
Instead, dispose of them in a collection or recycle box in accordance with local laws.
Do not incinerate or dispose of the battery in fire.
Introduction 5
1
1
1
1
1
1
1
1
1
1
For European users:
Do not dispose of batteries with ordinary refuse.
Instead, dispose of them in a recycle box in accordance
with local laws.
For North America and Canada Users:
When using the AC adapter
Use only the type of power source indicated on
the AC adapter’s label, and always supply power directly from a standard, domestic power outlet with a power cord that meets the relevant local safety standards. If you are not sure of the power supply specifications in your area, contact your local power company or contact our Customer Support.
Place the AC adapter near an electrical outlet
where the power cord can be easily unplugged.
The AC adapter and AC power cable are designed
for use and provided with this product. Do not attempt to use them with other electronic devices unless specified.
Do not remove the AC adapter from this device
during operations (connecting the AC adapter during operations is possible).
The AC adapter included is designed for use with
this product. Use of any other adapter could result in fire, electrical shock, or injury.
Use only AC adapter model A351H with P-2000.
Make sure the total amperage of all devices
plugged into the power outlet does not exceed the power outlet’s ampere rating.
Do not connect the AC adapter when the battery
is not installed. Otherwise, P-2000 may be damaged.
This mark indicates that the battery will be recycled by RBRC. When you dispose of the battery, contact RBRC.
6 Introduction
If you plan to use this product in Germany, the
building installation must be protected by a 16 amp circuit breaker to provide adequate short-circuit protection and over-current protection for this product.
Do not use a damaged or frayed AC adapter.
If you use an extension cord with this product,
make sure the total amperage of all devices plugged into the extension cord does not exceed the cord’s amperage rating.
Never disassemble, modify, or attempt to repair
the AC adapter by yourself except as specifically explained in this guide.
Do not use power outlets controlled by wall
switches or automatic timers.
Do not use power outlets on the same circuit as
large motors or other appliances that may cause voltage fluctuations.
Avoid using outlets on the same circuit as
photocopies or air control systems that regularly switch on and off.
To prevent fire or electric shock, do not cover the
AC adapter with a blanket or similar covering.
Position this product’s power cord so that it will
not be stepped on or run over.
Do not place any objects on the power cord and
the AC adapter.
Keep the power cord straight at the ends and at
the points where it enters the transformer.
The power cord should be placed to avoid
abrasions, cuts, fraying, crimping, kinking, and other damage.
If the AC plug does not fit your outlet, have a
proper outlet installed by a qualified electrician.
Remove the AC plug from the outlet during
lightning storms.
For US and Canadian users:
Use the included power cord or a 6 to 10 foot UL-approved type SPT-2 or heavier type, 2 × 18 AWG cord with a 125 V 10 A plug and 125 V 7 A connector.
Introduction 7
1
1
1
1
1
1
1
1
1
1
When using a memory card
Only memory cards designed for the product’s
specifications can be used.
Do not remove a memory card or turn off the
product while the Access lamp is flashing. See “LCD and control panel” on page 11 to find where the Access lamp is.
When using the LCD
The LCD panel on this product may contain a few
small bright or dark spots. These are normal and do not mean that your LCD panel is damaged in any way.
If the LCD panel on this product is damaged,
consult your dealer.
If the liquid crystal solution contained in the LCD
panel on this product leaks out and gets onto your hands, wash them thoroughly with soap and water. If it gets into your eyes, flush them immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor immediately.
Only use a soft, dry cloth to clean the display. Do
not use liquid or chemical cleaners.
When storing, maintaining, or transporting P-2000
Do not store this product outdoors.
Do not store this product near water.
Do not store this product in a location subject to
high temperature or humidity.
Do not store this product in a location subject to
rapid changes in temperature or humidity.
Do not store this product in a location subject to
direct sunlight or strong light sources.
Unplug this product from the power outlet before
cleaning it. Use a damp cloth for cleaning and do not use liquid or aerosol cleaners.
8 Introduction
Remove the battery from and unplug this product
and refer servicing to qualified service personal under the following conditions: The power cord or plug is damaged; liquid has entered this product or its options; this product or its options have been dropped or the case is damaged; this product or its options do not operate normally or exhibit a distinct change in performance.
Safety information for United Kingdom users
The following safety information applies to the AC adapter.
w
Warning:
Refer to the rating plate for the voltage and check that the appliance voltage corresponds to the supply voltage.
Important:
The wires in the mains lead fitted to this appliance are colored in accordance with the following code:
Blue — Neutral Brown — Live
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows;
The blue wire must be connected to the terminal in the plug marked with the letter N.
The brown wire must be connected to the terminal in the plug marked with the letter L.
If damage occurs to the plug, replace the cord set or consult a qualified electrician.
For United Kingdom, Hong Kong, and Singapore users
Replace fuses only with fuses of the correct size and rating.
Getting Started 9
2
2
2
2
2
2
2
2
2
2
Chapter 2
Getting Started
Unpacking Your P-2000
Make sure that all of the items shown below were
included in the box with your P-2000.
* The plug type for the power cable may vary, depending on the
local standards.
P-2000
Stand
Carrying case
USB cable
Strap
Lithium-ion battery
Power cable* AC adapter
User’s Guide (this guide)
Software CD-ROM
10 Getting Started
Parts
Front
Back
CF Card slot
Power switch with Hold function
Control panel
LCD
SD Card slot
Reset button
CF Card slot eject button
Battery cover
A/V Out connector
USB connector
AC adapter connector
Headphone connector
USB connector rubber cover
Speaker
Getting Started 11
2
2
2
2
2
2
2
2
2
2
LCD and control panel
Print button Press this button to display
the Print menu.
Menu button Press this button to display
the pop up menu. For details, see “Using the Pop Up Menu” on page 44.
Charge
lamp (Green) On when the battery is being
charged.
OK button
Print button
Charge lamp
Cancel button
4-way ring
Access lamp
Menu button
Illumination lamp
Display button
Home button
Access lamp (Orange) Flashes when accessing data
on the HDD or a memory card.
4-way ring
(Up/ Down/Left/Right button)
Press this button to move the cursor or highlight. You can select an object by pressing this button to the right, left, up, or down.
Illumination lamp (Blue) Flashes during such
operations as turning the power on, or during printing.
OK button Press this button to
determine the selection and proceed to the next step.
Cancel button Press this button to cancel the
selection and return to the previous screen.
Display button Press this button to display
information, instructions, or messages.
Home button Press this button to go back
to the Home screen.
12 Getting Started
Setting Up the P-2000
After unpacking your P-2000, set it up so it is ready to use. This section describes how to charge the battery and turn the power on and off.
Charging the battery
Installing the battery
1. Slide the battery cover to the left.
The battery cover opens.
2. Insert the battery into the compartment in the direction of the arrow on the battery.
3. Close the battery cover and slide it to the right until it clicks.
arrow
BATT.
Getting Started 13
2
2
2
2
2
2
2
2
2
2
Charging the battery
After installing the battery, charge the battery using the AC adapter.
Note:
The battery status is always displayed at the top right corner of the LCD.
1. Make sure that the battery is installed.
c
Caution:
Do not connect the AC adapter when the battery is not installed. Doing so may cause P-2000 to be damaged.
2. Connect the AC adapter to P-2000 as shown below and plug the other end into a power outlet.
The Charge lamp is on during charging. When the battery is fully charged, the Charge lamp turns off. It takes about 3 hours to fully charge the battery when P-2000 is off. It takes more when you are operating it.
Note:
P-2000 stops charging, if the battery becomes hot when operating it during charging. In that case, it starts charging again when it cools down.
Removing the battery
1. Make sure that P-2000 is turned off.
: Indicates sufficient battery power.
: Indicates moderate battery power.
: Indicates low battery power.
: Indicates battery power is running out. P-2000 is shut down
automatically. Charge the battery using the AC adapter.
: Indicates the AC adapter is connected to P-2000.
14 Getting Started
c
Caution:
Remove the AC adapter if it is connected to
P-2000.
Never remove the battery while P-2000 is
turned on. Doing so may cause data in the card or HDD to be lost or damaged.
2. Open the battery cover.
3. Push the catch down.
The battery is pushed out.
4. Pull out the battery. Then close the battery cover.
w
Warning:
Do not carry loose batteries in your pockets.
Turning the power on
Slide the power switch to as shown below. The power switch will return to the original position.
The illumination lamp turns on.
illumination lamp
Getting Started 15
2
2
2
2
2
2
2
2
2
2
When you turn on P-2000 the first time, the Language setting screen and Date and time settings screen are displayed. Follow the instructions below.
1. The Language setting screen appears. Select the
language you want to use with the 4-way ring, and press the OK button.
2. The Date and time settings screen appears. Press the Right or Left button on the control panel to change the value of the selected item.
3. After you finish making the setting, select a different item by pressing the UP or Down button on the control panel.
4. Repeat steps 2 and 3 until you finish making the date and time settings.
5. After you finish making all settings, press the OK button.
Note:
If you remove the battery from P-2000, the date and
time settings will be erased after approximately one day at the most.
Italiano
Francais
Espanol
Language setting
English (Intl.)
Nederlands
Deutsch
Date and time
Date Format
Minute
Hour
Day
Month
Year
2004
Jul
26
13
07
YYYYMMDD
16 Getting Started
If the date and time settings are erased, the Date and
time settings screen is displayed when you turn on P-2000 next time.
After changing the battery, make sure that the date and
time is set correctly. If necessary, set the date and time again.
You can change the settings later. See
“Changing the P-2000 Settings” on page 55 for details about setting the date and time settings.
Turning the power off
1. Make sure that the Access
lamp is off.
2. Slide the power switch to as shown below and hold it down for several seconds until the illumination lamp turns off. The power switch will return to the original position.
illumination lamp
Getting Started 17
2
2
2
2
2
2
2
2
2
2
Holding the button operations
You can make the buttons of P-2000 ineffective temporarily by sliding the power switch to Hold
as
shown below.
Note:
To deactivate hold, slide the power switch back to the
middle.
Putting the button operations on hold is a useful
function when you put P-2000 in your bag while listening to audio with the headphones.
How to use the Home screen
When turning P-2000 on, the Home screen appears first. All the operations can be started from this screen. You can return to the Home screen by pressing the Home button.
Battery icon Indicates the remaining
charge in the battery. See “Charging the battery” on page 12 for details.
Home
Latest Data Settings
Albums Memory CardSaved Data
Battery icon
Album shortcut
18 Getting Started
You can also use the pop up menu by pressing the
Menu
button. For details, see “Using the Pop Up
Menu” on page 44.
About the stand
You can use the stand when you view images and play movies. Set P-2000 to the stand as shown below.
Saved Data Select to display folders that
include data saved in P-2000 from memory cards.
Latest Data Select to display the latest
data saved in P-2000 from a memory card.
Albums Select to display albums. See
“Using the Albums” on page 34 to find information on the albums.
Album shortcut Select to access a favorite
album. You can set a shortcut icon for an album. See “Setting an album shortcut” on page 40 for details.
Memory Card Select to display or copy data
in the memory cards.
Settings Select to set P-2000’s various
settings.
Loading...
+ 56 hidden pages