Epson PixiePlus Control System fors Product Brochure
PixiePlus™ Control System for Epson Projectors
PROJECTOR AND A/V CONTROL
Projector control made easy.
With the PixiePlus control system for Epson, you can easily control Epson projectors and associated A/V devices
using either RS-232 or IR programming codes. The PixiePlus control system also allows you to consolidate your
projector and source controls in one wall unit, so you don’t ever have to worry about lost remotes again. And, it is
incredibly easy to install. Its sleek backlit panel fits in any wall box. It also comes with the standard RS-232 control
codes for Epson projectors pre-installed. Best of all, it’s safe and secure with its convenient security code feature.
Convenient compatibility — controls Epson projectors and A/V devices using either RS-232 or
IR commands
Easy installation — installs in any standard wall box; has RS-232 codes for Epson projectors pre-installed
PC-free programming — use the IR remote control for your A/V device(s) to quickly program
the control system
Automatic projector shutdown timer — saves both money and energy
Secure in any setting — create your own security code to prevent unauthorized access
POWER
ON OFF
PixiePlus™ Control System for Epson Projectors
POWER
ON OFF
POWER
POWER
ON OFF
POWER
SOURCE
VIDEO
COMP
SOURCE
comp video
audio
VOLUME
POWER
SOURCE
comp video
audio
Projector and A/V Control
Product Name Product Code UPC
PixiePlus ELPSP10 0 10343 88080 1
Accessories Product Code UPC
PXE-PGM-Tool (programming wand) ELPSP12 0 10343 88082 5
Specifications
Package Type
Single-gang Decora™ mounting
Dimensions (W x D x H)
1.75" x .90" x 4.13"
Weight (with bezel and 3 insert modules)
2.5 oz
Power Supply
6 VDC, 300 mA
Output Type
IR emitter and unidirectional RS-232
Outboard Current-Limiting Resistor (IR emitter)
150 ohm
Recommended Wire
18- to 22-gauge 3-conductor copper wire
Button Options
Power
If the device you are controlling has discrete power buttons, use the
ON/OFF combination; otherwise, use the toggling power
POWER
ON OFF
POWER
Source
Depending on the configuration of the source inputs of your display,
you can choose among these included source selection options
SOURCE
SOURCE
VIDEO
COMP
SOURCE
comp video
audio
Easy To Install
The single-gang PixiePlus fits in a standard wall box with a Decora
wallplate (not included).
Bezel
Button
Inserts
Circuit Board
A three-conductor cable
between the PixiePlus and
the controlled device carries
power and control to a
supplied terminal block
that allows RS-232 and/or
IR control. One block is
included. Others may
be added to control
RS-232 Cable
additional devices.
PXE-PGM-Tool
Programming wand
Single-gang
Wall Box
(not included)
™
Cat-5 Cable
6 V Power Supply
Volume
Some displays have volume, while others do not
VOLUME
RS-232/IR
Terminal Block
Epson America, Inc.
3840 Kilroy Airport Way, Long Beach, CA 90806
Epson is a registered trademark, Epson Exceed Your Vision is a registered logomark and Better Products for a Better Future is a trademark of Seiko Epson Corporation. SmartWay is a service mark of the
U.S. Environmental Protection Agency. All other product and brand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all rights in these marks.
Copyright 2011 Epson America, Inc. CPD-32295R1 1/11 PDF
eco.epson.com
Epson Canada, Ltd.
3771 Victoria Park Avenue, Toronto, Ontario M1W 3Z5
IR Emitter Bud
(For use with the
Epson AP-60, or other
IR controlled devices)
www.epson.com
www.epson.ca
PixiePlus Control
Loading...