Epson P-1000 Notice

Legal Notices

Safety Instructions

Read all these instructions before using the EPSON P-1000, and keep this guide
handy for later reference. Follow all warnings and instructions marked on the
P-1000 and any options.

When Using the P-1000

❍ Follow all warnings and instructions marked on this product.
❍ Do not insert objects into the slots or openings on this product.
❍ Do not touch the components inside this product unless instructed to do so in

the documentation. Never force this product’s components into place.
Although this product is designed to be sturdy, rough handling can damage it.

❍ Never spill liquid onto this product.
❍ If this product emits unusual noises, odors, or smoke, cancel the current

operation and turn it off immediately. Disconnect the AC adapter from the
product, then unplug the AC adapter from the power outlet. Contact
EPSON.

❍ To prevent fire or electric shock, do not cover this product with a blanket or

other covering that may give off a static electric shock.

❍ To prevent fire or electric shock, do not expose this product or its options to

rain or moisture.

❍ To prevent fire or explosion, do not use this product where flammable or

volatile gas is stored.

❍ Do not use this product outdoors during a thunderstorm.
❍ Do not use this product after moving it between extreme temperatures, which

may cause condensation to form on electronic parts.

When Using the Battery

❍ If battery acid gets into your eyes or on your skin, immediately rinse the

affected area thoroughly with water and seek medical treatment. If a battery is
swallowed, seek medical treatment immediately.

❍ Use only an EPSON Lithium-ion battery for the P-1000 according to the

instructions in this manual.

❍ Do not use the battery that comes with this product for other devices.
❍ To protect against short-circuiting, do not remove the outside sleeves of the

battery.

❍ Do not handle the battery with wet hands or use it near water.
❍ Do not expose the battery to water or high humidity.
❍ Do not drop, puncture, disassemble, mutilate, or short-circuit the battery.
❍ Do not place the battery near or into fire or water.
❍ Do not use batteries that are leaking or damaged in any way.
❍ Do not charge the battery on devices except this product.
❍ Do not charge the battery near open flame or in very hot locations.
❍ Keep batteries away from heat sources.
❍ Do not insert objects into any openings as they may touch dangerous voltage

points or short-circuit components.

❍ Prevent the battery from coming into contact with metal objects that could

short-circuit it, such as coins or keys.

❍ Do not insert the battery into power outlets or other power sources such as car

cigarette lighter sockets.

❍ Do not solder wires or terminals directly to the battery.
❍ Do not touch battery terminals.
❍ Keep batteries away from open flame if they leak or smell strange.
❍ If overheating, discoloration, or distortion occur, remove the battery from this

product and do not use it.

When Storing the Battery

❍ When not using this device for a long period, remove the battery from this

product and store it separately.

❍ Do not store batteries where the temperature or humidity is very high.
❍ Store batteries out of children’s reach.
❍ Discharge the battery completely before storing it for a long time.
❍ When not using the battery for a long time, charge the battery and then

discharge it completely about once a year during storage.

When Disposing of the Battery

Before disposing of the battery, make sure you discharge it completely.

Warning:

Be sure to securely cover the end of the battery with tape to prevent
combustion or explosion when disposing.
Do not dispose of batteries as ordinary refuse. Instead, dispose of them in a
collection or recycle box in accordance with local laws.

For North America and Canada Users:

This mark indicates that the battery will be recycled by the RBRC.
When you are ready to dispose of the battery, contact the RBRC at
[phone].

When Using the AC Adapter

❍ Use only the type of power source indicated on the AC adapter’s label, and

always supply power directly from a standard, domestic power outlet with a
power cord that meets the relevant local safety standards.

❍ Place the AC adapter near an electrical outlet where the power cord can be

easily unplugged.

❍ The AC adapter is designed for use and provided with this product. Do not

attempt to use it with other electronic devices unless specified.

❍ Do not remove the AC adapter from this device during operations.
❍ The AC adapter included is designed for use with this product. Use of any

other adapter could result in fire, electrical shock, or injury.

❍ Use only the power source that meets the power requirements indicated on the

label attached to the product. If you are not sure of the power supply
specifications in your area, contact your local power company or regulatory
agency.

❍ Make sure the total amperage of all devices plugged into the power outlet does

not exceed the power outlet’s ampere rating.

❍ Do not use a damaged or frayed AC adapter.
❍ If you use an extension cord with this product, make sure the total amperage

of all devices plugged into the extension cord does not exceed the cord’s
amperage rating.

❍ Never disassemble, modify, or attempt to repair the AC adapter by yourself.
❍ Do not use power outlets controlled by wall switches or automatic timers.
❍ Do not use power outlets on the same circuit as large motors or other

appliances that may cause voltage fluctuations.

❍ Avoid using outlets on the same circuit as photocopiers or air control systems

that regularly switch on and off.

❍ Position this product’s power cord so that it will not be stepped on or run over.
❍ Do not place any objects on the power cord and the AC adapter.
❍ Keep the power cord straight at the ends and at the points where it enters the

transformer.

❍ The power cord should be placed to avoid abrasions, cuts, fraying, crimping,

kinking, and other damage.

❍ If you cannot insert the plug into the power outlet, contact an electrician.
❍ For US and Canadian users: Use the included power cord or a 6 to 10 foot

UL-approved type SPT-2 or heavier type, 2
A plug and 125 V 7 A connector.

When Using a Memory Card

❍ Only memory cards designed for the product’s specifications can be used. (See

page 7.)

❍ The methods for using memory cards vary according to card type. See the

documentation included with your memory card for details.

❍ Do not remove a memory card or turn off the product while the

light is flashing.

When Using the LCD

❍ The LCD panel on this product may contain a few small bright or dark spots.

These are normal and do not mean that your LCD panel is damaged in any
way.

❍ If the LCD panel on this product is damaged, contact EPSON.
❍ If the liquid crystal solution contained in the LCD panel on this product leaks

out and gets ont o your hands, wash them thoroughly with soap and water. If it
gets into your eyes, flush them immediately with water. If discomfort or vision
problems remain after a thorough flushing, see a doctor immediately.

❍ Use only a soft, dry cloth to clean the display. Do not use liquid or chemical

cleaners.

x 18 AWG cord with a 125 V 10

ACCESS

When Storing, Maintaining, or Transporting the P-1000

❍ Do not store this product outdoors.
❍ Do not store this product near water.
❍ Do not store this product in a location subject to high temperature or

humidity.

❍ Do not store this product in a location subject to rapid changes in temperature

or humidity.

❍ Do not store this product in a location subject to direct sunlight or strong

light sources.

❍ Unplug this product from the power outlet before cleaning it. Use a damp

cloth for cleaning and do not use liquid or aerosol cleaners.

❍ Remove the battery and unplug this product and refer servicing to qualified

service personnel under the following conditions: The power cord or plug is
damaged; liquid has entered this product or its options; this product or its
options have been dropped or the case is damaged; this product or its options
do not operate normally or exhibit a distinct change in performance.

FCC Compliance Statement for United States Users

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio or television reception. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio and television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures.

❍ Reorient or relocate the receiving antenna
❍ Increase the separation between the equipment and receiver
❍ Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

❍ Consult the dealer or an experienced radio/TV technician for help

Warning

The connection of a non-shielded equipment interface cable to this equipment will
invalidate the FCC Certification of this device and may cause interference levels
which exceed the limits established by the FCC for this equipment. It is the
responsibility of the user to obtain and use a shielded equipment interface cable
with this device. If this equipment has more than one interface connector, do not
leave cables connected to unused interfaces.

Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.

For Canadian users

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Declaration of Conformity

According to 47CFR, Part 2 and 15 for Class B Personal Computers and
Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal
Computers:

We: EPSON AMERICA, INC.
Located at: MS 3-13

3840 Kilroy Airport Way
Long Beach, CA 90806
Telephone: [phone]

Declare under sole responsibility that the product identified herein, complies with
47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product
marketed is identical to the representative unit tested and found to be compliant
with the standards. Records maintained continue to reflect the equipment being
produced can be expected to be within the variation accepted, due to quantity
production and testing on a statistical basis as required by 47CFR §2.909.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Tr a de Na m e: E P SO N
Type of Product: Photo Viewer
Model: G881A

Epson America, Inc. Limited Warranty

What Is Covered: Epson America, Inc. (“EPSON”) warrants to the first retail
purchaser that the EPSON product enclosed with this limited warranty statement,
if purchased and used in the United States or Canada, conforms to the
manufacturer’s specifications and will be free from defects in workmanship and
materials for a period of one (1) year from the date of original purchase. For
warranty service, you must provide proof of the date of original purchase.

What EPSON Will Do To Correct Problems: Should your EPSON product
prove defective during the warranty period, please call the EPSON Connection
at [phone] for warranty repair instructions and return authorization, if
required. An EPSON service technician will provide telephone diagnostic service
to determine whether the unit requires service. If service is needed, EPSON will, at
its option, repair or exchange the product without charge for parts or labor. If the
product requires repair or replacement, it is your responsibility to package it in its
original container or an equivalent, along with proof of the date of original
purchase and ship it to EPSON. Packaging and shipping costs incurred in
presenting your EPSON product for warranty service are your responsibility.
Return shipping costs from the EPSON repair facility are EPSON’s responsibility.
When warranty service involves the exchange of the product or of a part, the item
replaced becomes EPSON property. The replacement product or part may be new
or refurbished to the EPSON standard of quality, and, at EPSON’s option, may be
another model of like kind and quality. EPSON’s liability for replacement of the
covered product will not exceed the original retail selling price of the covered
product. Exchange products and parts assume the remaining warranty period of
your original product covered by this limited warranty.

What This Warranty Does Not Cover: This warranty does not apply to
refurbished or reconditioned products. This warranty covers only normal use in
the United States and Canada. This warranty is not transferable and will not apply
to products purchased from an end user. This warranty does not cover damage to
the EPSON product caused by parts or supplies not manufactured, distributed or
certified by EPSON. This warranty does not cover third party parts, components
or peripheral devices added to the EPSON product after its shipment from
EPSON. EPSON is not responsible for warranty service should the EPSON label
or logo or the rating label or serial number be removed or should the product fail
to be properly maintained or fail to function properly as a result of misuse, abuse,
improper installation, neglect, improper shipping, damage caused by disasters such
as fire, flood, and lightning, improper electrical current, software problems,
interaction with non-EPSON products, or service other than by an EPSON
Authorized Servicer. If a claimed defect cannot be identified or reproduced, you
will be held responsible for costs incurred.

THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY, NON-INFRINGEMENT OR FITNESS FOR A
PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN
ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE
WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN,
ANY STATEMENT OR REPRESENTATIONS MADE BY ANY OTHER
PERSON OR FIRM ARE VOID. EXCEPT AS PROVIDED IN THIS
WRITTEN WARRANTY, NEITHER EPSON AMERICA, INC., NOR ITS
AFFILIATES SHALL BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR
DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR
INABILITY TO USE THE EPSON PRODUCT, OR FOR LOST DATA OR
LOST SOFTWARE, WHETHER RESULTING FROM BREACH OF
WARRANTY OR ANY OTHER LEGAL THEORY.

In Canada, warranties include both warranties and conditions.

Some jurisdictions do not allow limitations on how long an implied warranty lasts
and some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations and exclusions may not apply to
you. This warranty gives you specific legal rights, and you may also have other
rights which vary from jurisdiction to jurisdiction.

Epson America, Inc., P. O. Box 93012, Long Beach, CA 90809-3012

© 2003 by Epson America, Inc., 12/03 CPD-17653

SM