Epson EHDMC 10 Operating Instructions
Wireless Mirroring Adapter
EHDMC10
Copyright©2014 Seiko Epson Corporation. All rights reserved.
2014.06
Introduction
Thank you very much for purchasing this product.
Make sure you read this guide before using the product to ensure you use it
safely and correctly. Keep this guide in a safe place so that you can access it
easily if you have any questions in the future.
Safety Instructions
This documentation uses graphical symbols to show how to use the product
safely and avoid injury to others or damage to property. These symbols and
their meanings are shown below. Make sure you understand these symbols
before reading this guide.
This symbol indic ates i nformatio n that , if ignored , coul d
Warning
Caution
Only use the unit at the specied voltage.
Check the specications for the power cable.
If you do not use the correct power cable, a re or electric shock could occur.
Do no t leave t his pro duc t u natt end ed in loc atio ns subj ect to u nusu ally h igh
temperatures such as in a car with the windows closed, in direct sunlight or, next to the
exhaust vent of an air-conditioner or heater.
The pro duct may be deformed by the h igh temperatures, the internal workings may be
damaged, or a re could occur.
pos sibly resu lt i n p ersona l in jury or even dea th d ue t o
incorrect handling.
This symbol indic ates i nformatio n that , if ignored , coul d
possibly result in personal injury or physical damage due to
incorrect handling.
Warning
2
Do not place vases, containers containing water, or medical containers on this product.
If any liquid spills from the container, a re or electric shock could occur.
Take care when handling the power plug.
If it is not handled correctly, a re or electric shock could occur.
Note the following points when handling the plug.
• Do not overload wall outlets, extension cables, or power strips.
• Do not plug it in if there are any foreign substances, such as dust, attached to the plug.
• Make sure the plug is fully plugged in.
• Do not plug in or unplug if your hands are wet.
• Do not unplug by pulling on the power cable.
• Do not use a dierent power supply (AC adapter).
Do not use a damaged power cable.
Otherwise, a re or electric shock could occur.
• Do not modify the power cable.
• Do not place heavy objects on the power cable.
• Do not apply excess force, bend, or twist the power cable.
• Do not perform wiring near an electric heater.
Do not install or use this product in locations subject to humidity or water such as the
outdoors, or near a bath or shower.
Otherwise, a re or electric shock could occur.
Do not touch the plug during a thunderstorm.
Otherwise, an electric shock could occur.
If you not ice any of t he foll owing ab normalitie s, turn off the pro duct im mediately,
unplug the power cabl e from the el ectrical outlet, and cont act your local dealer or
Epson service call center.
• If you see smoke coming from the product, or notice abnormal odors or sounds.
• If any water or foreign substance enters the product.
• If the product was dropped and the case was damaged.
If you continue using the product in any of these states, a re or electric shock could occur.
Do not perform repairs yourself.
3
Except as indicate d in the " User's Guide", t he cas e for this product should only be
opened by qualied service personnel. Do not disassemble or remodel this product or
its consumables.
Many sections inside the product carry a high elec trical charge which could cause a re or
electric shock to occur.
Caution
When moving the product, make sure you tur n o the power, unplug the power cable
from the electrical outlet, and disconnect any wiring before moving.
Otherwise, a re or electric shock could occur.
Do not install the product in a location subject to humidity or dust such as a kitchen
counter or near a humidier, or in a location subject to smoke or steam.
Otherwise, a re or electric shock could occur.
Do not install the product in the following locations.
• On a carpet, a bed, a blanket, and so on.
• Do not cover it with a blanket, curtain, tablecloth, and so on.
Do not place the product on a surface that is slanted or unstable.
Otherwise, it could fall and cause an injury.
When maintaining the product, do not use a wet cloth o r solvent s such as alc ohol,
benzene, or thinner.
Otherwise, an electric shock or malfunction could occur.
Do not sit on this product, or place heavy objects on this product.
Otherwise, an injury could occur.
When ma intaining the product, make sure you unplug the power, unplug the power
cab le from the el ectr ical ou tlet, an d d iscon nect an y w iring be fore per form ing
maintenance.
Otherwise, an electric shock could occur.
4
For safe ty reasons, make sure you unp lug the power cable from the electrical outlet
when the product is not in use.
If the insulation has degraded, a re could occur.
When using this product, make sure it is at least 22 cm (8 inches) away from your body.
WARNING: This product contains chemicals, including lead, known to the
State of California to cause birth defects or other reproductive harm. Wash
hands after handling. (This notice is provided in accordance with Proposition 65 in the Cal. Health & Safety Code § 25249.5 and later.)
Features
Wirelessly send images from video devices (Source function)
You can send images from devices that support HDMI output such as
HDD recorders, and playback the images on MOVERIO BT-200.
Wireless/
Wireless
Wireless
Link
Pass-Thru
Ready
HDMI cable
Wirelessly receive images from MOVERIO BT-200 (Sink function)
You can receive images from MOVERIO BT-200, and then playback the
images on a television or projector.
Note
You can only connect to one MOVERIO BT-200 to send or receive images.
Connect
5
Included Items
Wireless/
Wireless
Wireless
Link
Pass-Thru
Ready
Connect
Base unit micro USB cable AC adapter
An HDMI cable is not included. To connect an HDMI device, you need to obtain a commercially available HDMI cable.
(Depend on country)
Parts and Functions
Ports
Reset button
A
micro USB port
A
Supplies power to this unit. Connect to an electrical outlet using the supplied micro USB cable and AC adapter.
HDMI Output port
B
Outputs images received from the HDMI Input or Miracast connection.
HDMI Input port
C
Inputs images from other devices.
6
B
C
Loading...