How it Works
Epson
Loading...
EB-145OUI
User Manual
295 pgs9.05 Mb0
Table of contents
Loading...

Epson EB-145OUI, EB-1440UI User Manual

User's Guide
Contents
2
Notations Used in This Guide 8
Introduction to Your Projector 9
Projector Features............................................................................ 10
Unique Interactive Functions.................................................................................................... 10
Quick and Easy Setup .................................................................................................................. 10
Flexible Connectivity.................................................................................................................... 10
Connect with Computers ..................................................................................................... 11
Easy Operation from the Control Pad ................................................................................... 12
Large-scale Presentation from the Whiteboard ................................................................ 12
Projector Parts and Functions ........................................................ 13
Projector Parts - Front/Side ....................................................................................................... 13
Projector Parts - Top/Side .......................................................................................................... 14
Projector Parts - Interface........................................................................................................... 15
Projector Parts - Base ................................................................................................................... 17
Projector Parts - Control Panel................................................................................................. 17
Projector Parts - Remote Control ............................................................................................ 18
Projector Parts - Interactive Pens ............................................................................................ 20
Projector Parts - Pen Stand........................................................................................................ 21
Projector Parts - Control Pad..................................................................................................... 21
Projector Parts - Touch Unit ...................................................................................................... 22
Connecting to a Computer for VGA Video and Audio.............................................. 28
Connecting to Smartphones or Tablets................................................................................ 32
Connecting to Video Sources ................................................................................................... 32
Connecting to an HDMI Video Source ............................................................................ 33
Connecting to a Composite Video Source..................................................................... 34
Connecting to External USB Devices ..................................................................................... 35
USB Device Projection ........................................................................................................... 35
Disconnecting a USB Device ............................................................................................... 36
Connecting a Printer to the Control Pad.............................................................................. 37
Connecting to a Document Camera ...................................................................................... 37
Connecting an External USB Keyboard to the Control Pad .......................................... 37
Connecting to External Output Devices............................................................................... 38
Connecting to an External DVI Monitor.......................................................................... 38
Connecting to External Speakers ...................................................................................... 40
Connecting Multiple Projectors of the Same Model ....................................................... 40
Installing Batteries in the Remote Control .................................... 43
Installing Batteries in the Pens ....................................................... 44
Setting Up the Projector 24
Projector Placement ........................................................................ 25
Projector Setup and Installation Options............................................................................. 25
Settings when Using the Interactive Features ................................................................... 26
Projector Connections ..................................................................... 28
Connecting to a Computer........................................................................................................ 28
Remote Control Operation .............................................................. 45
Using Basic Projector Features 46
Turning On the Projector ................................................................ 47
Home Screen ................................................................................................................................... 48
Turning Off the Projector ................................................................ 50
Setting the Date and Time .............................................................. 51
Contents
3
Selecting the Language for the Projector Menus ......................... 53
Projection Modes ............................................................................. 54
Changing the Projection Mode Using the Remote Control.......................................... 54
Changing the Projection Mode Using the Menus ............................................................ 54
Focusing the Image.......................................................................... 56
Image Shape..................................................................................... 59
Correcting the Image Shape with the Keystone Buttons .............................................. 59
Correcting the Image Shape with Quick Corner ............................................................... 60
Correcting Image Shape with Curved Surface ................................................................... 62
Loading Image Shape Setting from Memory ............................................................... 64
Resizing the Image with the Buttons ............................................. 66
Adjusting the Image Position ......................................................... 67
Selecting an Image Source .............................................................. 68
Image Aspect Ratio .......................................................................... 70
Changing the Image Aspect Ratio.......................................................................................... 70
Available Image Aspect Ratios ................................................................................................. 70
Projected Image Appearance with Each Aspect Mode .................................................. 71
Color Mode ....................................................................................... 72
Changing the Color Mode ......................................................................................................... 72
Available Color Modes................................................................................................................. 72
Setting Auto Iris ............................................................................................................................. 72
Adjusting the Image Color .............................................................. 74
Adjusting the Hue, Saturation, and Brightness.................................................................. 74
Adjusting the Gamma ................................................................................................................. 75
Controlling the Volume with the Volume Buttons ....................... 77
Using the Interactive Features 78
Interactive Feature Modes .............................................................. 79
Safety Instructions for Interactive Features......................................................................... 80
Using the Interactive Pens ......................................................................................................... 80
Pen Calibration ......................................................................................................................... 82
Calibrating Automatically..................................................................................................... 82
Using Interactive Touch Operations with Your Finger ................................................... 85
Calibrating for Touch Operations with Your Finger................................................... 87
Whiteboard Screens (Whiteboard Mode) ...................................... 91
Starting Whiteboard Mode........................................................................................................ 91
Whiteboard Mode Toolbar ........................................................................................................ 92
Whiteboard Mode Bottom Toolbar ........................................................................................ 95
Projecting Scanned Images in Whiteboard Mode ............................................................ 97
Compatible File Types for Opening in Whiteboard Mode ............................................ 98
Sharing Drawings Created in Whiteboard Mode .............................................................. 99
Saving Drawing Contents in Whiteboard Mode.......................................................... 99
Available File Format in Whiteboard Mode ................................................................ 101
Printing Drawing Contents in Whiteboard Mode..................................................... 101
Available Printer Control Commands in Whiteboard Mode................................. 102
Sending Emails in Whiteboard Mode............................................................................ 102
Creating an Address Book ................................................................................................. 104
Available Directory Service in Whiteboard Mode..................................................... 104
Whiteboard Sharing with Other Devices........................................................................... 105
Sharing Whiteboard Screen with Other Devices ...................................................... 105
Connection to the Shared Whiteboard ........................................................................ 108
Connecting to a Shared Whiteboard from a Projector........................................... 108
Available Features when Connecting to a Whiteboard Screen .......................... 109
Connecting to a Shared Whiteboard from a Computer or Other Device via
a Web Browser ....................................................................................................................... 111
Supported Web Browsers for Sharing a Whiteboard.............................................. 112
Toolbar for Whiteboard Screen Connecting via a Web Browser ........................ 112
Preparing Before Using Interactive Features................................ 80
Draw on the Projected Image Using Annotation Mode............. 115
Contents
4
Starting Annotation Mode ...................................................................................................... 115
Annotation Mode Toolbar....................................................................................................... 116
Annotation Mode Bottom Toolbar....................................................................................... 117
Using Drawing Contents of Annotation Mode................................................................ 118
Saving Drawing Contents in Annotation Mode ........................................................ 118
Printing Drawing Contents in Annotation Mode...................................................... 118
Control Computer Features from a Projected Screen
(Computer Interactive Mode) ....................................................... 120
Computer Interactive Mode System Requirements ...................................................... 120
Using Computer Interactive Mode....................................................................................... 121
Adjusting the Pen Operation Area....................................................................................... 123
Installing Easy Interactive Driver on OS X ......................................................................... 124
Switching the Interactive Mode ................................................... 125
Selecting Network Device Display ............................................... 126
Connecting to a Remote Computer ............................................. 128
Remote Desktop Connection System Requirements.................................................... 129
Remote Desktop Connection Restrictions ........................................................................ 130
Using the Interactive Features over a Network.......................... 131
Precautions when Connecting to a Projector on a Different Subnet ..................... 131
Windows Pen Input and Ink Tools ............................................... 132
Enabling Windows Pen Input and Ink Features.............................................................. 132
Using Windows Pen Input and Ink Features .................................................................... 133
Interactive Features when Projecting Two Images
Simultaneously............................................................................... 134
Switching Split Screen Projection......................................................................................... 134
Selecting Split Screen Settings for the Interactive Feature ........................................ 135
Interactive Features when Projecting with Two Projectors ...... 137
Using the Interactive Features Temporarily on Only One of the Projectors........ 137
Adjusting Projector Features 139
Projecting Two Images Simultaneously ...................................... 140
Unsupported Input Source Combinations for Split Screen Projection .................. 141
Split Screen Projection Restrictions ..................................................................................... 142
Projecting a PC Free Presentation ............................................... 143
Supported PC Free File Types ................................................................................................ 143
Precautions on PC Free Projection....................................................................................... 143
Starting a PC Free Slide Show ................................................................................................ 144
Starting a PC Free PDF File Presentation........................................................................... 145
Starting a PC Free Movie Presentation ............................................................................... 147
PC Free Display Options ........................................................................................................... 148
Shutting Off the Image and Sound Temporarily ........................ 150
Stopping Video Action Temporarily ............................................ 151
Zooming Images............................................................................. 152
Using the Remote Control as a Wireless Mouse ......................... 153
Using the Remote Control as a Pointer ....................................... 155
Saving a User's Logo Image .......................................................... 156
Saving a User Pattern .................................................................... 158
Using Multiple Projectors ............................................................. 159
Projector Identification System for Multiple Projector Control................................. 159
Setting the Projector ID ...................................................................................................... 159
Selecting the Projector You want to Operate............................................................ 160
Adjusting Color Uniformity ..................................................................................................... 161
Adjusting the Lamp's Brightness .......................................................................................... 163
Matching the Image Colors..................................................................................................... 164
Adjusting RGBCMY ..................................................................................................................... 165
Projector Security Features .......................................................... 167
Password Security Types.......................................................................................................... 167
Setting a Password ............................................................................................................... 167
Selecting Password Security Types ................................................................................ 168
Contents
5
Entering a Password to Use the Projector................................................................... 169
Locking the Projector's Buttons ............................................................................................ 169
Unlocking the Projector's Buttons .................................................................................. 170
Installing a Security Cable ....................................................................................................... 171
Using the Projector on a Network 172
Wired Network Projection............................................................. 173
Connecting to a Wired Network ........................................................................................... 173
Selecting Wired Network Settings........................................................................................ 173
Wireless Network Projection ........................................................ 176
Installing the Wireless LAN Module..................................................................................... 176
Selecting Wireless Network Settings Manually ............................................................... 177
Selecting Wireless Network Settings in Windows .......................................................... 179
Selecting Wireless Network Settings in OS X................................................................... 179
Setting Up Wireless Network Security ................................................................................ 179
Supported Client and CA Certificates............................................................................ 181
Using a QR Code to Connect a Mobile Device ................................................................ 182
Using a USB Key to Connect a Windows Computer...................................................... 182
Secure HTTP.................................................................................... 184
Importing a Web Server Certificate Using the Menus .................................................. 184
Supported Web Server Certificates ................................................................................ 185
Monitoring and Controlling the Projector 186
EasyMP Monitor ............................................................................. 187
Controlling a Networked Projector Using a Web Browser ........ 188
Registering Digital Certificates from a Web Browser.................................................... 189
Setting Up Projector Network E-Mail Alerts ............................... 191
Network Projector E-mail Alert Messages ......................................................................... 191
Setting Up Monitoring Using SNMP............................................. 192
Using ESC/VP21 Commands ........................................................ 193
ESC/VP21 Command List ......................................................................................................... 193
Cable Layouts ............................................................................................................................... 193
PJLink Support ............................................................................... 195
Crestron RoomView Support ........................................................ 196
Setting Up Crestron RoomView Support........................................................................... 196
Controlling a Networked Projector Using Crestron RoomView................................ 196
Crestron RoomView Operation Window...................................................................... 197
Crestron RoomView Tools Window................................................................................ 198
Setting Projector Event Schedules ............................................... 200
Adjusting the Menu Settings 203
Using the Projector's Menus ......................................................... 204
Using the On-screen Keyboard..................................................... 205
Available Text Using the On-screen Keyboard ................................................................ 205
Image Quality Settings - Image Menu ......................................... 206
Input Signal Settings - Signal Menu............................................. 208
Projector Feature Settings - Settings Menu ................................ 210
Projector Setup Settings - Extended Menu................................. 213
Extended Menu - Easy Interactive Function Menu........................................................ 216
General...................................................................................................................................... 216
PC Interactive.......................................................................................................................... 217
Extended Menu - Whiteboard Settings Menu ................................................................. 218
Whiteboard Settings Menu - Basic Menu .................................................................... 218
Whiteboard Settings Menu - Policy Menu................................................................... 219
Whiteboard Settings Menu - Print Menu ..................................................................... 220
Whiteboard Settings Menu - Save Menu ..................................................................... 220
Whiteboard Settings Menu - Mail Menu ...................................................................... 221
Whiteboard Settings Menu - Directory Menu ............................................................ 222
Whiteboard Settings Menu - Reset Menu.................................................................... 224
Projector Network Settings - Network Menu.............................. 225
Contents
6
Network Menu - Basic Menu .................................................................................................. 226
Network Menu - Wireless LAN Menu .................................................................................. 227
Network Menu - Wired LAN Menu ....................................................................................... 229
Network Menu - Notifications Menu................................................................................... 230
Network Menu - Others Menu............................................................................................... 231
Network Menu - Reset Menu.................................................................................................. 231
Projector Setup Settings - ECO Menu .......................................... 233
Projector Information Display - Info Menu ................................. 235
Info Menu - Projector Info Menu .......................................................................................... 235
Event ID Code List................................................................................................................. 236
Projector Reset Options - Reset Menu ......................................... 238
Copying Menu Settings Between Projectors (Batch Setup) ...... 239
Transferring Settings From a USB Flash Drive ................................................................. 239
Batch Setup Error Notification ......................................................................................... 240
Maintaining the Projector 241
Cleaning the Projection Window.................................................. 242
Cleaning the Obstacle Sensor ....................................................... 243
Cleaning the Projector Case.......................................................... 244
Replacing the Soft Pen Tip with the Hard Pen Tip......................................................... 257
Solving Problems 258
Projection Problems ...................................................................... 259
Projector Indicator Status ............................................................. 260
Using the Projector Help Displays................................................ 262
Solving Image or Sound Problems............................................... 263
Solutions When No Image Appears..................................................................................... 263
Solutions When Image is Incorrect Using the USB Display Function ..................... 263
Solutions When "No Signal" Message Appears ............................................................... 264
Displaying From a Laptop.................................................................................................. 264
Displaying From a Mac Laptop........................................................................................ 265
Solutions When "Not Supported" Message Appears .................................................... 265
Solutions When Only a Partial Image Appears................................................................ 265
Solutions When the Image is not Rectangular................................................................ 265
Solutions When the Image Contains Noise or Static..................................................... 266
Solutions When the Image is Fuzzy or Blurry .................................................................. 266
Solutions When the Image Brightness or Colors are Incorrect ................................. 267
Solutions to Sound Problems................................................................................................. 267
Solutions When Image File Names are not Displayed Correctly in PC Free......... 268
Air Filter and Vent Maintenance .................................................. 245
Cleaning the Air Filter ............................................................................................................... 245
Replacing the Air Filter ............................................................................................................. 247
Projector Lamp Maintenance ....................................................... 249
Replacing the Lamp................................................................................................................... 250
Resetting the Lamp Timer ....................................................................................................... 252
Replacing the Remote Control Batteries ..................................... 254
Replacing the Interactive Pen Battery ......................................... 255
Replacing the Interactive Pen Tip ................................................ 256
Replacing the Soft Pen Tip...................................................................................................... 256
Solving Projector or Remote Control Operation Problems....... 269
Solutions to Projector Power or Shut-Off Problems...................................................... 269
Solutions to Problems with the Remote Control............................................................ 269
Solutions to Password Problems........................................................................................... 270
Solution When "The Battery that Saves Your Clock Settings is Running Low"
Message Appears ........................................................................................................................ 270
Solving Interactive Features Problems........................................ 271
Solutions When "Error Occurred in the Easy Interactive Function" Message
Appears........................................................................................................................................... 271
Solutions When the Interactive Pens Do Not Work....................................................... 271
Solutions When Manual Calibration Does Not Work .................................................... 272
Solutions When You Cannot Operate a Computer from the Projected Screen . 272
Contents
7
Solutions When the Interactive Pen Position Is Not Accurate................................... 272
Solutions When the Interactive Pens Are Slow or Difficult to Use........................... 273
Solutions When the Interactive Touch Operation Does Not Work.......................... 273
Solutions for Problems with Capturing, Printing, Saving, or Scanning.................. 273
Solutions When Inking Does Not Appear in Microsoft Office ................................... 274
Solutions for Problems with a Shared Whiteboard ...................................................... 274
Solutions When the Time Is Incorrect in Whiteboard Settings ................................. 274
Solving Network Problems ........................................................... 275
Solutions When Wireless Authentication Fails ................................................................ 275
Solutions When You Cannot Access the Projector Through the Web ................... 275
Solutions When Network Alert E-Mails are not Received............................................ 275
Solutions When the Image Contains Static During Network Projection............... 275
Appendix 277
Optional Accessories and Replacement Parts............................. 278
Cables .............................................................................................................................................. 278
Mounts............................................................................................................................................ 278
For Interactive Feature.............................................................................................................. 278
For Wireless Connection .......................................................................................................... 278
External Devices .......................................................................................................................... 279
Replacement Parts...................................................................................................................... 279
Notices ............................................................................................ 293
FCC Compliance Statement.................................................................................................... 293
Indication of the manufacturer and the importer in accordance with
requirements of EU directive.................................................................................................. 294
Restriction of Use........................................................................................................................ 294
Operating System References................................................................................................ 294
Trademarks.................................................................................................................................... 294
Copyright Notice ......................................................................................................................... 295
Copyright Attribution................................................................................................................ 295
Screen Size and Projection Distance ............................................ 280
Supported Monitor Display Resolutions ..................................... 281
Projector Specifications................................................................. 283
Connector Specifications............................................................... 284
External Dimensions...................................................................... 285
USB Display System Requirements .............................................. 287
Easy Interactive Driver System Requirements ............................ 288
List of Safety Symbols (corresponding to IEC60950-1 A2) ........ 289
Glossary .......................................................................................... 291

Notations Used in This Guide

Safety Symbols
The projector and its manuals use graphical symbols and labels to indicate content that tells you how to use the projector safely.
Read and carefully follow the instructions that are marked with these symbols and labels to avoid injury to persons or damage to property.
This symbol indicates information that, if ignored, could possibly result in personal injury or even death.
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
Caution
General Information Notations
This label indicates procedures that may result in damage or injury if sufficient care is not taken.
Attention
This label indicates additional information that may be useful to know.
[Button name] Indicates the name of the buttons on the remote control or the control panel.
Example: [Esc] button
Menu/Setting name Indicates projector menu and setting names.
Example: Select the Image menu s Image > Advanced
This label indicates links to the related pages.
s
This label indicates a page where detailed information regarding a topic can be found.

Introduction to Your Projector

Refer to these sections to learn more about your projector's features and part names.
gg Related Links
• "Projector Features" p.10
• "Projector Parts and Functions" p.13

Projector Features

10
This projector comes with this special features. Refer to these sections for more details.
gg Related Links
• "Unique Interactive Functions" p.10
• "Quick and Easy Setup" p.10
• "Flexible Connectivity" p.10
• "Easy Operation from the Control Pad" p.12
• "Large-scale Presentation from the Whiteboard" p.12

Unique Interactive Functions

Easy annotation on the projected screen using the interactive pen or your finger.
• Quick and easy toolbar to aid you in annotating the screen.
• Projector operations from the projected screen.
• Share your whiteboard with other devices, including tablets, smartphones, and other projectors with whiteboard sharing capabilities.
• Scan and display content from a connected scanner.
• Email, save, or print your content without a computer.
• Import content from a USB drive.
• Remote desktop connection to control a remote computer.
• Computer operations from the projected screen.
• Touch-based interactivity using your finger (EB-1450Ui).

Quick and Easy Setup

• Direct Power On feature to turn on the projector as soon as you plug it in.
• Auto Power On feature to turn on the projector when the projector detects an image signal from the port you specified as the Auto Power On source.
• Home screen feature to easily select an input source and useful functions.
gg Related Links
• "Projector Setup Settings - Extended Menu" p.213
• "Turning On the Projector" p.47
• "Correcting the Image Shape with Quick Corner" p.60
• Annotation with or without a computer.
• Annotation with two pens at the same time.

Flexible Connectivity

This projector supports a wide variety of easy-to-use connectivity options as shown below.
gg Related Links
• "Connect with Computers" p.11
• "Connect with Mobile Devices" p.11
Projector Features
11
Connect with Computers
• Connect with one USB cable to project images and output audio (USB Display).
• EasyMP Multi PC Projection to project up to four images at the same time by splitting the projected screen. You can project images from computers on the network, or from smartphones or tablet devices on which Epson iProjection is installed.
See the EasyMP Multi PC Projection Operation Guide for details.
• When projecting images using a wireless LAN, you must install the
a
gg Related Links
• "Optional Accessories and Replacement Parts" p.278
• "Connecting to a Computer" p.28
• "Using the Projector on a Network" p.172
Epson 802.11b/g/n wireless LAN module, and then set up your projector and computer for wireless projection.
• You can download the necessary software and manuals from the following Web site:
http://www.epson.com/
Connect with Mobile Devices
• HDMI1/MHL port to connect an MHL cable to the mobile device and to the projector.
• Epson iProjection to connect your projector and mobile device wirelessly using the app available on App Store or Google play.
Any fees incurred when communicating with the App Store or
a
gg Related Links
• "Connecting to Smartphones or Tablets" p.32
Google play are the responsibility of the customer.
Projector Features

Easy Operation from the Control Pad

You can easily perform frequently used operations such as turning the power on/off and changing the source.
You can also connect various USB devices to multiple USB ports.

Large-scale Presentation from the Whiteboard

By connecting your projector to other projectors using the DVI-D Out port, you can easily project your whiteboard image live onto a large screen.
12

Projector Parts and Functions

13
The following sections explain the projector parts and their functions.
gg Related Links
• "Projector Parts - Front/Side" p.13
• "Projector Parts - Top/Side" p.14
• "Projector Parts - Interface" p.15
• "Projector Parts - Base" p.17
• "Projector Parts - Control Panel" p.17
• "Projector Parts - Remote Control" p.18
• "Projector Parts - Interactive Pens" p.20
• "Projector Parts - Pen Stand" p.21
• "Projector Parts - Control Pad" p.21
• "Projector Parts - Touch Unit" p.22

Projector Parts - Front/Side

Name Function
Remote receiver Receives signals from the remote control.
A
Indicators Indicates the projector's status.
B
Speaker Outputs audio.
C
Lamp cover Open to access the projector's lamp.
D
Lamp cover screw Screw to fix the lamp cover in place.
E
Projector Parts and Functions
14
Name Function
Air exhaust vent Exhaust vent for air used to cool the projector
F
internally.
Warning
Do not look into the vents. If the lamp explodes, gases may escape and small fragments of glass may be scattered which could cause an injury. Contact a doctor if any fragments of broken glass are inhaled or get into the eyes or mouth.
Caution
While projecting, do not put your face or hands near the air exhaust vent, and do not place objects that may become warped or damaged by heat near the vent. Hot air from the air exhaust vent could cause burns, warping, or accidents to occur.
Cable cover screws Screws to fix the cable cover in place.
G
Cable cover Loosen the two screws and open the cover when
H
connecting cables for external devices or installing the wireless LAN module.

Projector Parts - Top/Side

Name Function
Filter cover latch Opens the air filter cover.
A
Wireless LAN
B
indicator
Obstacle sensor Detects obstacles that are interfering with the
C
Indicates the access status of the supplied wireless LAN module.
projection area.
Projector Parts and Functions
15
Name Function
Remote receiver Receives signals from the remote control.
D
Projection window Images are projected from here.
E
Warning
• Do not look into the projection window while projecting.
• Do not place any objects or put your hand near the projection window. It could cause burns, fire, or the object to warp because this area reaches a high temperature due to the concentrated projection light.
Interactive pen
F
receiver
Control panel Operates the projector.
G
Security slot The security slot is compatible with the Microsaver
H
Air filter cover Open to access the air filter or focus lever.
I
Air intake vent (air
J
filter)
Focus lever Adjusts the image focus.
K
Receives signals from the interactive pen.
Security System manufactured by Kensington.
Takes in air to cool the projector internally.
Open the air filter cover to operate.

Projector Parts - Interface

Name Function
Monitor Out port Outputs analog RGB signals input from the Computer
A
Video port Inputs composite video signals from video sources.
B
Audio port Inputs audio from equipment connected to the Video
C
Audio Out port Outputs audio from the current input source to an
D
port to an external monitor. You cannot output signals input from other ports or component video signals.
port. Inputs audio from other devices when projecting
images from the device connected to the USB-A port. From now on, referred to as the Audio 2 port.
external speaker.
Projector Parts and Functions
16
Name Function
Audio port Inputs audio from equipment connected to the
E
Power inlet Connects the power cord to the projector.
F
HDMI1/MHL port Inputs video signals from HDMI compatible video
G
HDMI2 port Inputs video signals from HDMI compatible video
H
DVI-D Out port Outputs video signals to an external monitor.
I
LAN port Connects a LAN cable to connect to a network.
J
USB-B port Connects a USB cable to the computer to project
K
USB-A port Connects a USB memory device or a digital camera
L
Computer port. From now on, referred to as the Audio 1 port.
equipment and computers, or MHL (Mobile High­Definition) compatible mobile devices.
This port is compatible with HDCP.
equipment and computers. This port is compatible with HDCP.
This port is not compatible with HDCP.
computer images or to use the Wireless Mouse function.
Connects the projector to a computer via the supplied USB cable to use the interactive pen as a mouse.
Connects a USB cable to the control pad when connecting a computer to the control pad.
and projects movies or images using PC Free. Select USB1 as the image source when you connect a USB device to this port to use the projector's PC Free features.
Connects the optional document camera. Select USB2 as the image source when you connect the document camera to this port.
Connects a USB cable to the control pad when connecting a USB storage device, printer, or USB keyboard to the control pad.
Name Function
USB-A port Connects a USB memory device or a digital camera
M
Computer port Inputs image signals from a computer and component
N
TCH port
O
(EB-1450Ui)
SYNC IN/OUT port When using the interactive features in the same room
P
Remote port Connects to the control pad with the remote control
Q
RS-232C port Connects an RS-232C cable to control the projector
R
Wireless LAN module
S
slot
and projects movies or images using PC Free. Select USB1 as the image source when you connect a USB device to this port to use the projector's PC Free features.
Connects the optional document camera. Select USB2 as the image source when you connect the document camera to this port.
Connects a USB cable to the control pad when connecting a USB storage device, printer, or USB keyboard to the control pad.
video signals from other video sources.
Connects the supplied Touch Unit connection cable to the Touch Unit.
as multiple versions of the same projector, you need to connect the optional remote control cable set to the projectors. When the cable set is connected, the interactive pen operates stably.
cable set.
from a computer. (This port is for control use and should not normally be used.)
Install the supplied wireless LAN module.
Projector Parts and Functions
17

Projector Parts - Base

Name Function
Security cable
C
attachment point
Wall mount fixing
D
points (four points)
Illumination sensor Detects the brightness of the surroundings, and
E
Front foot fixing
F
point
Pass a commercially available wire lock through here and lock it in place.
Do not pass drop-prevention wires through here when mounting the projector on a wall or suspending it from a ceiling.
Attach the supplied or optional setting plate when mounting on a wall.
automatically adjusts the brightness of the screen. Set Power Consumption to Auto in the projector's ECO menu.
Attach the foot with a spacer when using the projector on a surface such as a desk. (Only models with feet supplied)

Projector Parts - Control Panel

Name Function
Ceiling mount fixing
A
points (five points)
Rear foot fixing
B
points (two points)
Attach the optional ceiling mount here when suspending the projector from a ceiling.
Attach the feet when using the projector on a surface such as a desk. (Only models with feet supplied)
Projector Parts and Functions
18
Name Function
[Source Search]
A
button
[Enter] button [ ] Enters the current selection and moves to the next level
B
Keystone adjustment
C
buttons and arrow buttons
[Esc] button Stops the current function.
D
Wide/Tele buttons
E
and arrow buttons
[Menu] button Displays and closes the projector's menu.
F
[Home] button Displays and closes the Home screen.
G H
Power button [ ]
Changes to the next input source.
while displaying the projector's menu or help. Optimizes Tracking, Sync., and Position in the
projector's Signal menu while projecting an analog RGB signal from the Computer port.
From now on, referred to as the [Enter] button.
Displays the Keystone screen allowing you to correct keystone distortion.
Selects menu items while displaying the projector's menu or help.
Moves back to the previous menu level while displaying the projector's menu.
: Enlarges the size of the projected image.
: Reduces the size of the projected image.
Corrects keystone distortion in the horizontal direction when the Keystone screen is displayed.
Selects menu items while displaying the projector's menu or help.
Turns the projector on or off. From now on, referred to as the power button.

Projector Parts - Remote Control

Projector Parts and Functions
19
Name Function
A
Power button [ ]
[HDMI] button Switches the image source between the HDMI ports.
B
[Computer] button Selects the Computer port as the image source.
C
Numeric buttons Enters numbers in the projector's menu while holding
D
[Auto] button Optimizes Tracking, Sync., and Position in the
E
[Aspect] button Changes the aspect mode.
F
[Num] button Hold down this button to enter numbers using the
G
[Menu] button Displays and closes the projector's menu.
H
Arrow buttons Selects menu items while displaying the projector's
I
[Enter] button [ ] Enters the current selection and moves to the next level
J
[User] button Performs settings assigned in the User Button setting
K
[Page] up/down
L
buttons
[E-Zoom] +/–
M
buttons
[A/V Mute] button Turns the video and audio on or off temporarily.
N
[Split] button Projects two images from different image sources
O
Turns the projector on or off. From now on, referred to as the power button.
down the [Num] button.
projector's Signal menu while projecting an analog RGB signal from the Computer port.
numeric buttons.
menu or help.
while displaying the projector's menu or help. Acts as a mouse's left button when using the Wireless
Mouse function. From now on, referred to as the [Enter] button.
in the projector's Settings menu.
Controls page up and down on your computer when you connect a projector and computer using a USB cable or over a network.
Displays the previous or next screen while using the PC Free feature.
Zooms in or zooms out the image area.
simultaneously by splitting the projected screen.
Name Function
Strap attachment
P
point
[Home] button Displays and closes the Home screen.
Q
[Freeze] button Pauses or resumes images.
R
[Volume] up/down
S
buttons
[Pointer] button Displays the on-screen pointer.
T
[Esc] button Stops the current function.
U
[Pen Mode] button Changes between operating the computer or drawing
V
[ID] button Hold down this button and press the numeric buttons
W
[Color Mode] button Changes the color mode.
X
[Link Menu] button Displays the settings menu for the device linked to the
Y
[Whiteboard] button Turns the projector on (if necessary) and displays
Z
[LAN] button Switches the image source between the network
a
[Source Search]
b
button
Remote control light
c
emitting area
Allows you to attach a commercially available strap to the remote control.
Adjusts the speaker volume.
Moves back to the previous menu level while displaying the projector's menu.
Acts as a mouse's right button when using the Wireless Mouse function.
using the interactive pen. (This button cannot be used in whiteboard mode.)
to select the ID for the projector you want to operate using the remote control.
projector's HDMI ports.
whiteboard mode. Switches to the previous input source during
whiteboard mode.
connected devices.
Changes to the next input source.
Outputs remote control signals.
Projector Parts and Functions
20

Projector Parts - Interactive Pens

Hold the pen to turn it on automatically. Pens turn off automatically after 15 seconds when you put them down.
Name Function
Pen tip Replaceable soft pen tip.
A
If the soft tip is hard to use on a textured surface, replace it with the hard tip.
Battery indicator Press the button on the side of the pen to indicate the
B
remaining battery power.
• When the battery is charged, the indicator turns blue until you release the button.
• When the battery is running low, the indicator flashes blue until you release the button.
• Does not light when the battery is exhausted. Change the battery.
Name Function
Button When Pen Button Function is set to Eraser in the
C
Strap attachment
D
point
Battery cover Open this cover when replacing the battery.
E
projector's Extended menu, press the button to switch the tip function between pen and eraser while drawing.
When Pen Button Function is set to Open Drawing Toolbar, press the button to display the toolbar near the pen tip.
When Pen Button Function is set to Clear Screen, press the button to erase all the contents drawn on the projected screen.
s Extended > Easy Interactive Function > General > Advanced > Pen Button Function
Press the button to perform a right-click operation while using the pen as a mouse.
Allows you to attach a commercially available strap.
gg Related Links
• "Replacing the Interactive Pen Tip" p.256
Projector Parts and Functions
21

Projector Parts - Pen Stand

Name Function
Front cover Open to install the pen stand.
A
Pen tip storage space Keep the pen tips here.
B
Pen storage space Keep the pens here.
C
Battery storage space Keep the AA batteries here.
D
Screw holes (for
E
installation)
The screw holes for securing the pen stand.

Projector Parts - Control Pad

Name Function
Cable path (upper) Open the cover to route cables through here.
A
Cable path Route cables through here.
B
Screw holes (for
C
installation)
D
Power button [ ]
[Whiteboard] button Turns the projector on (if necessary) and displays
E
[Source Search]
F
button
The screw holes for securing the control pad.
Turns the projector on or off. From now on, referred to as the power button.
whiteboard mode. Switches to the previous input source during
whiteboard mode.
Changes to the next input source.
Projector Parts and Functions
22
Name Function
USB-B port (for
G
connecting a computer)
USB-A port (for
H
connecting USB storage)
USB-A port (for
I
connecting a keyboard)
USB-A port (for
J
connecting a printer)
USB-B port (for
K
connecting a projector)
USB-A port (for
L
connecting a projector)
Remote port Connects to the projector with the cable supplied with
M
Front cover Open to connect cables.
N
Cable cover Open this cover when cables are wired along a wall.
O
Connects a USB cable to the computer to project computer images or to use the interactive pen as a mouse.
Connects a USB storage device.
Connects an external USB keyboard.
Connects a USB cable to the printer.
Connects a USB cable to the projector when connecting a USB storage device, printer, or USB keyboard to the control pad.
Connects a USB cable to the projector when connecting a computer to the control pad.
the control pad to power the control pad.
Front
When the dial cover is not attached
Stick the supplied port protection stickers on the ports that are not
a
being used.

Projector Parts - Touch Unit

The Touch Unit comes with the EB-1450Ui only.
Name Function
Dial cover Remove to use the adjustment dials.
A
TCH port Connects the projector to the Touch Unit with the
B
Security slot The security slot is compatible with the Microsaver
C
Adjustment dials Perform angle adjustments.
D
Indicator Lit when the Touch Unit is turned on.
E
Screw holes (for
F
installation)
Touch Unit connection cable.
Security System manufactured by Kensington.
The screw holes for securing the Touch Unit.
Projector Parts and Functions
23
Rear
Name Function
Laser diffusion ports Diffuse laser light to detect the position of fingers.
A
Installation magnets Magnets used for installation.
B
Attention
• Do not connect the Touch Unit to any devices except for EB-1450Ui. The device could malfunction, or laser light could leak beyond the limit.
• Make sure you use the supplied Touch Unit connection cable. Operations are not possible with a commercially available cable.
• When disposing of the Touch Unit, do not disassemble it. Dispose according to your local or national laws and regulations.
See the Installation Guide for the Touch Unit installation methods and
a
angle adjustment methods.
Warning
Do not use the Touch Unit near medical equipment such as pace makers. Furthermore, when using the Touch Unit, make sure there is no medical equipment such as pace makers, in the surrounding area. Electromagnetic interference may cause medical equipment to malfunction.
Caution
• Do not use the Touch Unit near magnetic storage media such as magnetic cards, or precision electronic devices such as computers, digital watches, or cell phones. Data could be corrupted or a malfunction could occur.
• When installing the Touch Unit on a magnetic surface, be careful not to trap your fingers or any other part of your body between the magnet and the installation surface.

Setting Up the Projector

Follow the instructions in these sections to set up your projector.
gg Related Links
• "Projector Placement" p.25
• "Projector Connections" p.28
• "Installing Batteries in the Remote Control" p.43
• "Installing Batteries in the Pens" p.44
• "Remote Control Operation" p.45

Projector Placement

25
You can install the projector on a wall, or place it on a table to project images.
You need the optional mounts when suspending the projector from a ceiling, installing it on a wall, or placing it vertically on a table.
Note the following points when selecting a projector location:
• Place the projector on a sturdy, level surface or install it using a compatible mount.
• Leave plenty of space around and under the projector for ventilation, and do not place it on top of or next to anything that could block the vents.
• Position the projector within reach of a grounded electrical outlet or extension cord.
• Place the projector parallel to the screen.
If you cannot install the projector parallel to the screen, correct
a
keystone distortion using the projector controls.
Warning
• A special method of installation is required when suspending the projector from a wall or ceiling. If you do not install the projector correctly, it could fall and cause damage or injury.
• Do not use adhesives on the wall mount plate fixing points or the ceiling mount fixing points to prevent the screws from loosening, or use lubricants, oils, or similar substances on the projector; the projector case may crack causing it to fall from its mount. This could cause serious injury to anyone under the mount and could damage the projector.
• Do not cover the projector's air intake or air exhaust vents. If the vents are covered, the internal temperature could rise and cause a fire.
• Do not install the projector on an unstable surface or in a location beyond the weight specifications of the projector. Otherwise, it could fall or topple causing an accident and injury.
• When installing the projector in a high position, take measures to prevent falling by using wires to ensure safety in an emergency, such as an earthquake, and to prevent accidents. If it is not installed correctly, it could fall causing an accident and injury.
Attention
• If you are using the projector at altitudes above 1500 m, set the High Altitude Mode setting to On in the projector's Extended menu to ensure the projector's
internal temperature is regulated properly. s Extended > Operation > High Altitude Mode
• Try not to setup the projector in locations subject to high humidity and dust, or in locations subject to smoke from fires or tobacco smoke.
gg Related Links
• "Projector Setup and Installation Options" p.25
• "Settings when Using the Interactive Features" p.26
• "Image Shape" p.59
• "Optional Accessories and Replacement Parts" p.278
• "Projector Setup Settings - Extended Menu" p.213

Projector Setup and Installation Options

You can set up or install your projector in the following ways:
Front/Rear
a
Attach the feet (if supplied) when using the projector on a surface such as a desk.
Projector Placement
26
Front Upside Down/Rear Upside Down
Front Upside Down/Rear Upside Down (Vertically)

Settings when Using the Interactive Features

When using the interactive features, project from in front of the screen.
Set Projection to Front/Upside Down or Front.
Attention
The interactive features are operated using infrared communication. Note the following points when installing the projector.
• Make sure there is no strong light or sunlight shining on the interactive pen receiver, the projection screen, the projector itself, or the rear of the projector.
• Do not install the projector where it could be subjected to direct sunlight through a window. This could cause the interactive features to malfunction.
• Install the projector so that the interactive pen receiver is not too close to fluorescent lights. If the surrounding area is too bright, the interactive features may not operate correctly.
• If there is any dust stuck to the interactive pen receiver, it could interfere with infrared communication and the interactive features may not operate correctly. Clean the receiver if it is dirty.
• Do not put paint or any stickers on the cover of the interactive pen receiver.
• When using the interactive features, do not use an infrared remote control or microphone in the same room. The interactive pen could malfunction.
• Do not use devices that generate powerful noise, such as rotary devices or transformers, near the projector, as the interactive features may not operate correctly.
Make sure you select the correct Projection option in the projector's Extended menu according to the installation method being used.
• The default Projection setting is Front/Upside Down.
a
gg Related Links
• "Projection Modes" p.54
• You can change the Projection setting as follows by pressing down the [A/V Mute] button on the remote control for about five seconds.
• Switch Front to/from Front/Upside Down
• Switch Rear to/from Rear/Upside Down
Projector Placement
• We recommend using a smooth, board type screen without any
a
gg Related Links
• "Settings when Using the Touch Unit" p.27
Settings when Using the Touch Unit
unevenness. If the projection screen is uneven, there may be distortions in the projected image.
• Distortions may occur in the projected image depending on the material of the screen and the installation method.
• When using the interactive features, install the projector so that the projected screen is a rectangle without any distortion.
• When using the interactive features in the same room as multiple projectors, interactive pen operations may become unstable. In this case, connect the optional remote control cable set to the projectors, and change Sync of Projectors to Wired from the projector's Extended menu.
s Extended > Easy Interactive Function > General > Advanced > Sync of Projectors
27
When using the Touch Unit, install the projector using one of the following methods (EB-1450Ui). The Touch Unit cannot be used if another installation method is used.
• Mount the projector on a wall or suspend it from a ceiling and project images from in front of the screen (the setting plate or ceiling mount is required).
• Install vertically on a desk and project from the front of the desk (the interactive table mount is required).
gg Related Links
• "Optional Accessories and Replacement Parts" p.278

Projector Connections

28
You can connect the projector to a variety of computer, video, and audio sources to display presentations, movies, or other images, with or without sound.
Attention
Check the shape and orientation of the connectors on any cable you plan to connect. Do not force a connector into a port if it does not fit. The device or your projector could be damaged or could malfunction.
See the Quick Start Guide for a list of cables supplied with your
a
• Connect a computer that has a USB port, standard video output (monitor) port, or HDMI port.
• For video projection, connect devices such as DVD players, gaming consoles, digital cameras, and smartphones with compatible video output ports.
• If your presentation or video includes sound, you can connect audio input cables.
• For slide shows or presentations without a computer, you can connect USB devices (such as a flash drive or camera) or the optional Epson document camera.
projector. Purchase optional or commercially available cables when necessary.

Connecting to a Computer

Follow the instructions in these sections to connect a computer to the projector.
gg Related Links
• "Connecting to a Computer for VGA Video and Audio" p.28
• "Connecting to a Computer for USB Video and Audio" p.29
• "Connecting to a Computer for HDMI Video and Audio" p.30
• "Connecting a Computer to the Control Pad" p.31
Connecting to a Computer for VGA Video and Audio
You can connect the projector to your computer using a VGA computer cable.
You can play sound through the projector's speaker system by connecting a commercially available 3.5 mm stereo mini-jack audio cable.
• To connect a Mac that does not have a VGA video port, you need an
a
adapter that allows you to connect to the projector's VGA video port.
• You can also set the port used for audio input from the projector's menu.
s Extended > A/V Settings > Audio Output
• Make sure the audio cable is labeled "No resistance".
gg Related Links
• "Connecting to a Computer" p.28
• "Connecting to Smartphones or Tablets" p.32
• "Connecting to Video Sources" p.32
• "Connecting to External USB Devices" p.35
• "Connecting a Printer to the Control Pad" p.37
• "Connecting to a Document Camera" p.37
• "Connecting an External USB Keyboard to the Control Pad" p.37
• "Connecting to External Output Devices" p.38
• "Connecting Multiple Projectors of the Same Model" p.40
• "Optional Accessories and Replacement Parts" p.278
Connect the VGA computer cable to your computer's monitor port.
a
Projector Connections
29
Connect the other end to a Computer port on the projector.
b
Tighten the screws on the VGA connector.
c
Connect the audio cable to your laptop's headphone or audio-out jack,
d
or your desktop's speaker or audio-out port.
Connect the other end to the projector's Audio 1 port.
e
Connecting to a Computer for USB Video and Audio
If your computer meets the system requirements, you can send video and audio output to the projector through the computer's USB port. This function is called USB Display. Connect the projector to your computer using a USB cable.
• If you use a USB hub, the connection may not operate correctly.
a
Connect the cable to your projector's USB-B port.
a
Connect the USB cable directly to the projector.
• To use the USB Display function, select USB Display/Easy
Interactive Function or Wireless Mouse/USB Display as the USB Type B setting in the projector's Extended menu.
Connect the other end to any available USB port on your computer.
b
Turn on the projector and your computer.
c
Do one of the following to install the Epson USB Display software:
d
Projector Connections
30
You only need to install this software the first time you connect
a
• Windows: Select Run EMP_UDSE.EXE in the dialog box that is displayed to install the Epson USB Display software.
• OS X: The Epson USB Display setup folder is displayed on your screen. Select USB Display Installer and follow the on-screen instructions to install the Epson USB Display software. If the USB Display Setup folder is not displayed automatically, double-click EPSON_PJ_UD > USB Display Installer.
Follow any on-screen instructions.
e
Do not disconnect the USB cable or turn off the projector until the projector displays an image.
The projector displays the image from your computer's desktop and outputs sound if your presentation contains audio.
a
the projector to the computer.
• If the projector does not project any images, do one of the following:
• Windows: Click All Programs > EPSON Projector > Epson USB Display > Epson USB Display Ver.x.xx.
• OS X: Double-click the USB Display icon in the Application folder.
• When you finish projection, do one of the following:
• Windows: Disconnect the USB cable. You do not need to operate Safely Remove Hardware.
• OS X: Select Disconnect from the USB Display icon menu on the menu bar or Dock, and then disconnect the USB cable.
To connect a Mac that does not have an HDMI port, you need an
a
a b
a
adapter that allows you to connect to the projector's HDMI port. Contact Apple for compatible adapter options. Older Mac computers (2009 and earlier) may not support audio through the HDMI port.
Connect the HDMI cable to your computer's HDMI output port.
Connect the other end to the projector's HDMI port.
If you have problems hearing audio through the HDMI connection, connect one end of a commercially available 3.5 mm stereo mini-jack audio cable to the projector's Audio port and the other end to your computer's audio out port. Select the audio input port you connected to in the projector's Extended menu.
s Extended > A/V Settings > HDMI1 Audio Output s Extended > A/V Settings > HDMI2 Audio Output
gg Related Links
• "USB Display System Requirements" p.287
Connecting to a Computer for HDMI Video and Audio
If your computer has an HDMI port, you can connect it to the projector using an HDMI cable and send the computer's audio with the projected image.
gg Related Links
• "Projector Setup Settings - Extended Menu" p.213
Loading...
+ 265 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use