Epson DW130 User Manual

ial Tool Company, 626 Hanover Pike, P.O. Box 158, Hampstead, MD 21074 Printed in U.S.A. (MAY95-CD-6) Form No. 158673-02
or information call toll free between 8:00 a.m. and 8:00 p.m., seven days a week. 1-800-4-DEWALT (1-800-433-9258)

Copyright 1993, 1995

INSTRUCTION MANUAL
DW130 1/2" Drill

F

R

Important Safety Instructions

WARNING: When using electric tools, basic safety
precautions should always be followed to reduce risk of fire,
electric shock, and personal injury, including the following:

READ ALL INSTRUCTIONS

Double Insulation

Double insulated tools are constructed throughout with two
separate layers of electrical insulation or one double
thickness of insulation between you and the tool’s electrical
system. Tools built with this insulation system are not
intended to be grounded. As a result, your tool is equipped
with a two prong plug which permits you to use extension
cords without concern for maintaining a ground connection.

NOTE: Double insulation does not take the place of normal
safety precautions when operating this tool. The insulation
system is for added protection against injury resulting from a
possible electrical insulation failure within the tool.

CAUTION: WHEN SERVICING USE ONLY IDENTICAL
REPLACEMENT PARTS. Repair or replace damaged cords.

Polarized Plugs

Polarized plugs (one blade is wider than the other) are used
on equipment to reduce the risk of electric shock. When
provided, this plug will fit in the polarized outlet only one way.
If the plug does not fit fully into the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician to install the
proper outlet. Do not change the plug in any way.

Safety Instructions For All T

• KEEP WORK AREA CLEAN. Cluttered ar
benches invite injuries.

• CONSIDER WORK AREA ENVIRONMEN
expose power tools to rain. Don’t use power tools
or wet locations. Keep work area well lit. Do not u
presence of flammable liquids or gases.

• GUARD AGAINST ELECTRIC SHOCK. Prev
contact with grounded surfaces. For exampl
radiators, ranges, and refrigerator enclosures.

• KEEP CHILDREN AWAY. Do not let visitors co
or extension cord. All visitors should be kept a
work area.

• STORE IDLE TOOLS. When not in use, tools s
stored in dry, and high or locked-up place — ou
of children.

• DON’T FORCE TOOL. It will do the job better an
the rate for which it was intended.

• USE RIGHT TOOL. Don’t force small tool or attac
do the job of a heavy-duty tool. Don’t use tool fo
not intended.

• DRESS PROPERLY. Do not wear loose clo
jewelry. They can be caught in moving parts
gloves and non-skid footwear are recommend
working outdoors. Wear protective hair covering t
long hair.

• USE SAFETY GLASSES. Also use face or dus
operation is dusty.

• DON’T ABUSE CORD. Never carry tool by cord
to disconnect from receptacle. Keep cord from
and sharp edges.

BRUSH
SYSTEM

CHUCK

SIDE HANDLE

ROCKER

SWITCH

1

MULTI-POSITION

SPADE HANDLE

…BUILT JOBSITE TOUGH

formance industrial tools are made for America‘s

al and construction applications. The design of every

from drills to sanders to grinders – is the result of

jobsites and throughout industry. Each tool is

ainstaking precision using advanced manufacturing

nse quality control. Every tool is checked before it
ry to make sure that it meets your standards for

y and power.
t Jobsite Tough…WE GUARANTEE IT.

ANY QUESTIONS OR COMMENTS

R ANY DEWALT TOOL, CALL US

1-800-4-D

EWALT (1-800-433-9258).

m Nameplate Date of Purchase

ormation for future reference.