Epson DM1 User Manual

Notations used in this guide

Indicates content that may cause the unit damage or malfunction.

Indicates additional information and points that may be useful to know regarding a topic.

s Indicates a page where useful information regarding a topic can be found.

Indicates operating methods and the order of operations. The procedure indicated should be carried out in order of the numbered steps.

Indicates remote control or main unit buttons.

“(Menu name)”

Indicates menu items and messages that are displayed on screen. Example: “Brightness”

Depending on the type of disc, the functions and operations which can be performed may be different. These marks inform you of the type of disc being used.

Contents

Safety Instructions..................................................... 2

Use and Storage......................................................... 8

Discs and USB Storage ............................................. 10

Parts Name and Functions......................................... 12

Preparing the Remote Control................................... 16

Quick Start

Installation................................................................. 18

Projection distance and screen size ............................................ 18

Connecting the power cable ....................................................... 18

Disc Playback............................................................ 19

Playing a disc and projecting ..................................................... 19

Adjusting the projection position and volume ........................... 20

Stopping playback ...................................................................... 22

Turning off the power ................................................................ 22

Basic Playback Operations........................................ 23

Pause........................................................................................... 23

Reverse search/forward search ................................................... 23

Skip............................................................................................. 24

Frame advance............................................................................ 24

Slow motion playback ................................................................ 24

Temporarily using the projector’s light as illumination

(Break)........................................................................................ 25

Color Mode ................................................................................ 25

Mute ........................................................................................... 25

Advanced Operations

Becoming a playback expert ..................................... 26

Playback from a DVD menu ...................................................... 26

Playback a Video CD from the menu......................................... 27

JPEG, MP3/WMA and DivX

Playback by selecting the chapter or track number.................... 32

Repeat play and random play ..................................................... 32

Program play .............................................................................. 34

Zoom In ...................................................................................... 35

Changing the audio language ..................................................... 36

Changing the subtitles display.................................................... 36

Changing the angle..................................................................... 37

Carrying out operations from the playback information

screen.......................................................................................... 37

Setting the sleep timer ................................................................ 39

Changing the aspect ratio ........................................................... 40

Playback by attaching a peripheral device ................ 42

Connecting a USB storage device .............................................. 42

Connecting to another video device, a TV set, or a

Computer .................................................................................... 43

Projecting images from external video equipment or a

computer..................................................................................... 45

Audio Settings ........................................................... 47

Listening with headphones ......................................................... 47

Connecting to audio equipment with a digital coaxial audio input

port ............................................................................................. 48

Selecting the Surround Sound mode .......................................... 48

playback ................................... 29

Selecting the digital sound effects .............................................. 49

Settings and Adjustments

Setup Menu Operation and Functions ....................... 50

Using the setup menu ................................................................. 50

Setup menu list ........................................................................... 51

Language code list ...................................................................... 53

“Digital Output” settings and output signals .............................. 54

Operations and functions on the Visual Setup

menu .......................................................................... 55

Operations on the Visual Setup menu ........................................ 55

Visual Setup menu...................................................................... 56

Appendix

Troubleshooting......................................................... 58

Reading the indicators ................................................................ 58

When the indicators provide no help .......................................... 60

Maintenance .............................................................. 62

Cleaning...................................................................................... 62

Consumables replacement period ............................................... 63

Optional Accessories and Consumables ..................................... 63

How to replace consumables ...................................................... 64

Projection Distance and Screen Size ......................... 68

Compatible Resolution List....................................... 69

Specifications ............................................................ 70

Glossary..................................................................... 72

Index .......................................................................... 73

Inquiries..................................................................... 74

Quick Start

Advanced Operations

Settings and

Adjustments

Appendix

Safety Instructions

All safety and operating instructions should be read before using the unit. After you have read all instructions, save this information for later reference. The documentation and the unit use graphical symbols to show how to use the unit safely. Please understand and respect these caution symbols in order to avoid injury to persons or property.

This symbol indicates information that, if ignored, could

Warning

Caution

Caution :

To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

possibly result in personal injury or even death due to incorrect handling.

This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Explanation of symbols

Symbols indicating an action that must not be done

Do not do Do not

disassemble

Symbols indicating an action that should be done

Instructions Disconnect

the plug from

the outlet

Do not

touch

Do not

wet

Do not use in

wet areas

Do not place

on an

unstable

surface

Important safety instructions

Follow these safety instructions when setting up and using the projector :

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third grounding prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Warning

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Unplug the unit from the outlet and refer all repairs to qualified service personnel under the following conditions:

• If smoke, unusual smells or unusual noises come from the unit.

• If liquid or foreign objects get inside the unit.

• If the unit has been dropped or the case has been damaged.

Continuing to use under these conditions may result in fire or electric shock. Do not try to repair this unit yourself. Refer all repairs to qualified service personnel. Place the unit near a outlet where the plug can be easily unplugged.

Never open any covers on the unit except as specifically explained in this guide. Never attempt to disassemble or modify the unit. Refer all repairs to qualified service personnel.

Electrical voltages inside the unit can cause severe injury.

Do not expose the unit to water, rain, or extensive humidity.

Do not use in

wet areas

Disconnect

the plug from

the outlet

Do not

disassemble

Use only the type of power source indicated on the unit. Use of a power source other than the specified may result in fire or electric shock. If you are not sure of the power available, consult your dealer or local electricity company.

Check the specifications of the power cable. Using an inappropriate power cable could result in fire or electric shock.

The power cable supplied with the unit is intended to comply with power supply requirements for the country of purchase. If using within the country of purchase, do not use any power cable other than the one supplied with the unit. If using the unit overseas, check the power supply voltage, outlet shape and electrical rating of the unit that conform to the local standards, and purchase a proper power cable in the country.

Take the following precautions when handling the plug.

Failure to comply with these precautions could result in fire or electric shock.

• Do not overload outlets, extension cables or multi-socket devices.

• Do not insert the plug into the outlet with dust present.

• Insert the plug firmly into the outlet.

• Do not handle the plug with wet hands.

• Do not pull the power cable when disconnecting the plug. Always be sure to hold the plug when disconnecting it.

Do not use in

wet areas

Do not do

Instructions

Do not use the power cable that is damaged. Fire or electric shock may result.

• Do not modify the power cable.

• Do not place heavy objects on top of the power cable.

• Do not bend, twist or pull the power cable excessively.

Do not do

• Keep the power cable away from hot electrical appliances.

If the power cable becomes damaged (such as the wires becoming exposed or broken), contact your dealer for a replacement.

If there is an electrical storm, do not touch the plug, otherwise you may receive an electric shock.

Do not touch

Warning

Do not place containers with liquids, water or chemicals on top of the unit.

If the containers spill and the contents get inside the unit, fire or electric shock may result.

Never look into the unit lens when the lamp is switched on as the bright light can damage your eyes.

Never push metallic or flammable objects or any other foreign materials through the air intake or air exhaust vents, fire or electric shock may result.

A mercury lamp with high internal pressure is used as the unit’s light source. Be sure to observe the instructions below.

If the following points are not observed, injury or poisoning may result.

• Do not damage the lamp or subject it to any impacts.

• The gases inside mercury lamps contain mercury vapor. If the lamp breaks, ventilate the room to prevent the gases that are released from being inhaled or coming into contact with the eyes or mouth.

• Do not bring your face close to the unit while it is in use.

If the lamp breaks and gases or fragments of broken glass from the lamp are inhaled or get into the eyes or mouth, or if any other ill effects are noticed, immediately seek medical advice.

Do not

wet

Do not do

Instructions

Do not leave the unit or the remote control with batteries inside a vehicle with the windows closed, in places where they will be exposed to direct sunlight, or in other places that may become extremely hot.

Thermal deformation or technical malfunction may occur, which could result in fire.

Do not do

Caution

Class 1 LASER Product

Do not open the top cover. There are no user serviceable parts inside the unit.

Do not use the unit in places where there are lots of humidity or dust, near cooking or heating appliances, or in places where it may come into contact with smoke or steam. Do not use or store this unit outdoors for an extended length of time.

Fire or electric shock may result.

Do not block the slots and opening in the unit case. They provide ventilation and prevent the unit from overheating.

• Material or paper may get stuck against the air filter underneath the unit while it is in use. Remove anything from underneath the unit that might get stuck against the air filter. If setting up the unit near a wall, leave a space of at least 20 cm between the wall and the air exhaust vent.

• Ensure there is at least 10 cm between the air intake vent and any walls, and so on.

• Do not place the unit on a sofa, rug, or other soft surface, or in a closed-in cabinet unless proper ventilation is provided.

Do not place the unit on an unstable cart, stand, or table.

The unit might fall down or tip over, and injury may result.

Do not

disassemble

Do not do

Do not place

on an

unstable

surface

Do not stand on the unit or place heavy objects on it.

The unit might collapse or fall down, and injury may result.

Do not place anything that can become warped or damaged by heat near the air exhaust vents, or bring your hands or face close to the vents while projection is in progress.

Because hot air comes out from the air exhaust vents, it may result in burns, warping or other accidents.

Never try to remove the lamp immediately after use because it will be extremely hot. Before removing the lamp, turn off the power supply and wait the duration specified in this guide to allow the lamp to cool completely.

The heat may cause burns or other injuries.

Do not place the source of a naked flame, such as a lit candle, on or near the unit.

Unplug the unit when it will not be used for extended periods.

The insulation may deteriorate, which may result in fire.

Do not do

Disconnect

the plug from

the outlet

Be sure to check that the power is turned off, the plug is disconnected from the outlet and all cables are disconnected before moving the unit.

Fire or electric shock may result.

Disconnect

the plug from

the outlet

Caution

Unplug the unit from the outlet before cleaning.

This avoids electric shock during cleaning.

When cleaning the unit, do not use wet cloths or solvents such as alcohol, thinner or benzine.

Water infiltration or deterioration and breakage of the unit case could result in electric shock.

Incorrect battery usage may cause leakage of battery fluid and battery rupture, which could result in fire, injury or corrosion of the unit. When replacing batteries, take the following precautions.

• Insert batteries so that the polarities (+ and -) are correct.

• Do not use batteries of different types or mix old and new batteries.

• Do not use any batteries other than those specified in this guide.

• If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash them immediately.

• Replace the batteries as soon as they run out.

• Remove the batteries if you will not be using the unit for a long period of time.

• Do not expose batteries to heat or flame and do not put them in water.

• Dispose of used batteries according to local regulations.

• Keep these batteries out of the reach of children. Batteries are choking hazards and are very dangerous if swallowed.

Disconnect

the plug from

the outlet

Instructions

Do not set the volume too high from the outset.

A loud sound may be produced suddenly that may cause damage to the speaker or your hearing. As a precaution, lower the volume before you switch off this unit then raise it gradually after you switch it back on.

When using headphones, do not turn the volume up too loudly.

You may adversely affect your hearing when listening at loud volumes over extended periods of time.

Follow the maintenance schedule for this unit. If the interior of the unit has not been cleaned for a long time, dust may build up, which could cause fire or electric shock.

Replace your air filter periodically as needed. Contact your dealer to clean the interior of the unit as needed.

Do not do

Instructions

Use and Storage

Take note of the following advice in order to prevent malfunction and damage.

range of that which is covered in your warranty

Notes on handling and storage

• Be sure to observe the operating temperatures

and storage temperatures given in this guide

when using and storing the projector.

• Do not set up the unit in places where it might

be subjected to vibration or shock.

• Do not install the unit close to television, radio or

video equipment that generates magnetic fields.

This may adversely affect the audio and images of

this unit, and may cause a malfunction. In the event

that such symptoms occur, move the unit further

away from any television, radio and video

equipment.

• Do not operate the projector under any of the

following conditions. If this is not observed,

problems with operation or accidents may result.

While the projector is standing on its end

While the projector is placed with the top facing up

terms.

• You can store the unit in an upright position

compactly on a shelf, etc., as it has storage feet

on its side. When storing the unit in an upright

position, place it on a stable surface with the

storage feet at the bottom. Be sure to place the

unit in the storage case supplied with the unit so

that no dust enters the air intake vent.

Condensation

If you move this unit from a cold place into a warm

room, or, if the room in which this unit is installed is

heated rapidly, condensation (moisture) may form

internally or on the lens surface. If condensation forms,

it may not only cause incorrect operation such as

weakening of the image, but also damage the disc and/

or parts. In order to prevent against condensation, setup

this unit in the room approximately one hour before it is

to be used. If by some chance condensation does form,

disconnect the power cable from the outlet, then wait

one to two hours before use.

While the projector is placed with the bottom up

• Do not move this unit during playback.

This may damage the disc or cause malfunction.

• Avoid using or storing this unit in cigarette or

other smoke filled places, or in rooms containing

a large amount of dust.

This may cause degradation of the image quality.

• Do not touch the projection lens with your bare

hands.

If fingerprints or marks are left on the face of the

lens, the image will not be projected clearly. When

the unit is not in use, be sure to attach the lens cover.

• EPSON will not be held responsible for damage

arising from projector or lamp failure outside the

While the projector is tilted to either side

Lamp

A mercury lamp with high internal pressure is used as

the unit’s light source.

The characteristics of the mercury lamp are:

• The intensity of the lamp decreases with use.

• When the lamp reaches the end of its life, it will no

longer light or may break with a loud noise.

• The life of the lamp may vary greatly depending on

the individual lamp characteristics and the operating

environment. You should always have a spare lamp

ready in case it is needed.

• Once the lamp replacement period has elapsed, the

possibility of lamp breakage incrcases. When the

lamp replacement message appears, replace the lamp

with a new one as soon as possible.

• This product includes a lamp component that contains

mercury (Hg). Please consult your local regulations

regarding disposal or recycling.

Do not dispose of it with normal waste.

LCD panel

Transportation cautions

• The LCD panel is manufactured using extremely

high-precision technology.

However, black dots may appear on the panel, or

some red, blue or green dots may light up extremely

brightly at times. Furthermore, sometimes striped

color irregularities or brightness irregularities may

also appear. They are caused by the characteristics of

the LCD panel, and are not a sign of malfunction.

• Screen burn may remain in the projected image when

a high-contrast still image is projected for more than

15 minutes.

If screen burn has occured, you should project a

bright screen (if a computer is used: white screen,

video: as bright an animation as possible) until the

screen burn disappears. It takes approx. 30 to 60

minutes, depending on the extent of the screen burn.

If the screen burn does not disappear, contact your dealer for advice. sp. 74

When moving this unit

• Close the lens cover.

• Eject the disc.

• Retract the unit feet if extended.

• Carry the unit by holding the handle as shown in

the following illustration.

• Many glass and precision parts are used within

this unit. In order to prevent impact during

transportation, re-use the box and protective

packaging you received at the time of purchase.

If you no longer have the original packing,

protect the outside of this unit with shock

absorbing material to protect it from impact,

place it inside a strong box and make sure it is

clearly labeled for the transportation of precision

equipment.

• Close the lens cover and pack the unit.

• If using a courier service for transportation,

inform them that this unit contains precision

equipment and should be handled accordingly.

* Your warranty does not cover any damages that may

occur to this product during transportation.

Copyrights

Reproduction of a disc for the purposes of broadcast,

projection in public, public musical performance, or

rental (regardless of compensation, remuneration, or

lack thereof) without the permission of the copyright

owner, is strictly prohibited.

Discs and USB Storage

Discs

Readable disc types

The following discs can be played.

Symbols

Disc types

DVD video Commercially available software

DVD+RW

DVD+R

DVD+R DL

DVD-RW

DVD-R

DVD-R DL

Video CD Software containing images and

CD The software containing sound

used in

this

guide

Explanation

containing high-quality movies

and forms of visual images.

You cannot play DVD videos if

the disc region code does not

correspond to the region code

label on the side of this unit.

DVD discs described on the left,

recorded on another DVD

recorder.

• Can play a DVD disc

containing video format

images.

• Can play a DVD disc

containing VR format images.

• Can play a disc if it has been

“finalized” by the DVD

recorder that has recorded the

images.

• Can play the following files

recorded in the ISO 9660/UDF

format:

MP3/WMA/JPEG/MPEG1/2/

4/DivX

• Can play only the first session

although the unit supports

multiple sessions.

sound.

• Can play a Video CD (in

version 2.0) with PBC

(playback control).

• Can play a Super Video CD

(SVCD).

and voice.

3/4/5/6/DivX® Ultra

CD-R/RW

CD+R/RW

CDs created with a CD recorder

or a computer.

• Can play the following files

recorded in the ISO9660 level-

1 or -2/UDF format:

MP3/WMA/JPEG/Kodak

Picture CD/FujiColor CD/

MPEG1/2/4/

3/4/5/6/DivX® Ultra

DivX

• Supports the extended format

(Joliet).

• Supports multiple sessions.

• Can play a disc recorded by

packet writing.

• The performance and tonal quality of copy-

control CD discs that do not conform to the

compact disc (CD) standard cannot be

guaranteed with this unit. CDs that conform to

the CD standard will bear the following compact

disc logo mark. Check what is displayed on the

packaging of the audio disc.

• This unit conforms to the NTSC and PAL

television signal formats.

• In the case of DVD video, SVCD, and Video CD,

playback functions may be intentionally limited

by the software producers. As this unit plays

back the contents of a disc certain functions

may not work. Refer to the attached user

information of the disc being played.

• DVD-R/R DL/RW, DVD+R/R DL/RW, CD-R/RW,

and CD+R/RW discs may not be able to be

played if they are scratched, dirty, warped, or if

the recording status or recording conditions are

unsuitable. Also, it may take the unit some time

to read the disc data.

• Only the audio of the following discs can be

played back.

- MIX-MODE CD - CD-G - CD-EXTRA

- CD TEXT

Unreadable disc types

• The following discs cannot be played.

- DVD-ROM - CD-ROM - PHOTO CD

- DVD audio - SACD - DACD

- DVD-RAM

• This unit can play only one memory card even if

multiple cards are mounted on the card reader.

Mount only the card you wish to play.

Specifications of files that

• Round discs with a diameter other than 8 cm or

12 cm

• Irregularly shaped discs

Disc Handling

• Avoid touching the playback side with your bare

hands.

• Be sure to store discs in their cases when not in

use.

• Avoid storing your discs in places with high

humidity or in direct sunlight.

• If the playback surface of the disc is dirty with

dust or fingerprints, the image and audio quality

may deteriorate. When the playback surface is

dirty, gently wipe the disc clean with a soft dry

cloth, starting from the center of the disc then

moving outwards.

• Do not use cleaning products such as benzine,

or anti-static products designed for analog

records.

• Do not glue paper or attach stickers to a disc.

USB storage that can be played

• You can attach and play the following USB 1.1

based storage devices to the unit:

- USB memory (only devices that are not equipped with

the security function)

- Multicard reader

- Digital camera (if USB mass storage class is supported)

• Use a multicard reader to connect an SD

memory card or other media to the unit.

• The FAT16 and FAT32 file systems are

supported.

• Some system files may not be supported. If the

media is not supported, format the media in the

Windows system before use.

can be played

File format

MP3 “.mp3” or

WMA “.wma” or

DivX

DivX®

Ultra

JPEG “.jpg” or “.JPG” Number of pixels: Up to

File extension

“.MP3”

“.WMA”

“.divx” or

“.DIVX”, “.avi”

or “.AVI”

*If double-byte character is used for a file name, it will

not be displayed correctly.

File size 4GB

Total number of files 648 files (including folders) + 2

Total number of

folders

default folders

Up to 300 folders

Specifications

Bit rate: 16 to 320K bps

Sampling frequency: 11

kHz, 16 kHz, 22.05 kHz,

32 kHz, 44.1 kHz, 48 kHz

Bit rate: 64 to 192K bps

Sampling frequency: 44.1

kHz, 48 kHz

Up to 3M bps

Maximum number of

pixels: 720 x 576 pixels

Optimum frame rate: 30

fps

A file may not be in the

DivX

it has an “.avi” or “.AVI”

file extension. In such a

case, the file cannot be

played.

3027 x 2048 pixels

No Motion JPEG is

supported.

JPEG data created by the

DCF (Design rule for

Camera File system)

standard based digital

camera is supported.

Pictures may not be

played back if the auto

rotate function of digital

still camera is used or if

data is processed, edited

or saved again using

computer image editing

software.

file format even if

Parts Name and Functions

Front

D E

Slide lens cover

Name Function

Close the lens cover to protect the lens when the unit is not in use.

You can stop the projection completely by closing the lens cover during projection. However, if this state continues for 30 minutes, the unit lamp is turned off automatically. sp. 18

Disc indicator Lights up green when a disc is inserted into the disc slot. sp. 19

Eject button

Remote control light-

receiving area

Disc slot

Feet

Headphone jack Connects a headphone to the unit. sp. 47

Speakers Placed on the left and right; supports the virtual surround sound system. sp. 48

Air intake vent

Handle Hold this handle when carrying the unit. sp. 9

Projection lens

Press this button to eject a disc from the disc slot.

Receives signals from the remote control.

Insert a disc you wish to play.

The feet on the side of the projection lens can be extended by turning them. Extending the feet to the maximum extent tilts this unit by approximately 5 degrees. sp. 21

Take the cooling air into the unit. If dust collects on the air intake vent it can cause the internal

temperature of the unit to rise, and this can lead to operation problems and a shortening of the

service life of optical parts. Clean it periodically.

Projects an image.

sp. 19

sp. 22

sp. 16

sp. 62

Rear

A B

Name Function

I H

Computer input port

Component input port Can be connected to the component (YCbCr or YPbPr) output port of a video device. sp. 44

Video input port

Audio input port

Power inlet port

Digital Coaxial Audio-Out

port

USB port

Security slot (j)

Remote control light-

receiving area

Speakers

Air exhaust vent

Can be connected to the RGB output port of a computer.

Can be connected to the ordinary image output port of a video device.

Can be connected to the audio output port of the connected video device or a computer.

sp. 43, 44

Connect the power cable. 18

Can be connected to an audio device with a digital coaxial audio input port. sp. 48

Connects a USB 1.1-based USB memory or a multicard reader to play the MP3/WMA, JPEG,

and other format storages. sp. 42

DivX

Supports Kensington’s micro saver security system. For details, access the Kensington website at

http://www.kensington.com/.

Receives signals from the remote control.

Placed on the left and right; supports the virtual surround sound system.

The air outlet of the unit after cooling.

sp. 16

sp. 44

sp. 43

sp. 48

Caution

Do not block the exhaust vents, and do not touch the exhaust vent immediately after projecting, or

while projecting, since it becomes hot.

Storage feet

Used when placing the unit in an upright position. When storing the unit in an upright position,

place it on a stable surface with the storage feet at the bottom. Be sure to place the unit in the

storage case supplied with the unit so that no dust enters the air intake vent.

To p

SourcePower

Volume

Enter

Return

vVolume adjustment buttons sp. 20

vZoom button sp. 20

Volume

SourcePowe r

Enter

Return

vEnter button

sp. 29

vPower button

sp. 22

vPlay/Pause

button

vw/v button

sp. 21

sp. 23

vSource button

sp. 45

Name Function

Focusing ring Move to the left or right for image focusing. sp. 20

Status indicator

If a problem occurs in the unit, the status indicator blinks or lights up to indicate the problem.

vStop button

sp. 22

sp. 58

Lamp cover

Lens cover knob

When replacing the lamp, open this cover and replace the lamp.

Slide the holder to open or close the lens cover.

vReturn button

sp. 29

sp. 65

sp. 18

Remote Control

Handy functions

sp. 37 sp. 32

sp. 34 sp. 39

sp. 48 sp. 49

sp. 35 sp. 40

Buttons used during playback

sp. 22 sp. 23, 24

sp. 23, 24 sp. 23, 24

sp. 24 sp. 24

sp. 22

sp. 26 sp. 26, 28,

29, 30, 31

Advanced functions

sp. 45 sp. 25

sp. 25

Buttons used when adjusting audio

sp. 20 sp. 25

Buttons used when adjusting DVD video

sp. 36 sp. 36

sp. 50 sp. 28

sp. 27, 28, 29, 30

sp. 26, 28, 29, 30

C D

Name Function

Remote control light-

emitting area

sp. 37

Emits remote control signals.

Turns power supply to the unit on or off. sp. 22

Corrects keystone distortion of the screen image to square or rectangular. sp. 21

Displays or closes the projection adjustment and checkout menu. sp. 55

sp. 16

Function/numeric toggle

switch

Press this button to eject a disc from the disc slot. sp. 22

Switches between the functions and numerics you wish to use. Slide this switch to the Function position to use any function. sp. 26

Preparing the Remote Control

Inserting the batteries

At the time of purchase, the batteries are not installed into the remote control.

Insert the batteries provided with this unit, before use.

Push in the catch on the rear of the remote control, then lift it

upwards.

Insert the batteries observing correct polarity.

Close the battery cover.

Caution

Check the positions of the (+) and (-)

marks inside the battery holder to

ensure the batteries are inserted the

correct way.

If delays in the responsiveness of the remote control occur, or if it does not

operate after it has been used for some time, it probably means that the

batteries are becoming flat and need to be replaced. Have two spare AA-

size alkaline (manganese) batteries ready to use when required.

Remote control usage range

Operable range (horizontal)

Approx. 30°

Operable range (vertical)

Approx. 30°

6 m6 m

Approx. 15° Approx. 15°

6 m6 m

Avoid allowing direct sunlight or fluorescent light to fall on the remote

control light-receiving area of this unit. The signal from the remote control

may not be able to be received.

Quick Start

Playback procedure

No complicated connections are necessary. You do not even need to select the television type or change the input.

You can enjoy your DVDs on the big screen by following these four easy steps.

The standard speakers support the virtual surround sound system, and you can enjoy real stereo surround sound using the

left and right speakers.

Position in front of the screen. sp. 18

Connect the power cable. sp. 18

Play a disc. sp. 19

Adjust the projection position, size, and volume. sp. 20

Installation

Projection distance and screen size

Place the unit in a position that will

enable the optimum size image to be projected on the screen.

When you use a 16:9 ratio, 80” type widescreen,

for example, place the unit approximately 237 cm

away from the screen.

* Standard value

The further this unit is moved away from the

screen, the larger the projected image becomes.

Position this unit so that it is parallel to

the screen.

Screen

If this unit is not placed parallel to the screen, the

projected image is distorted in the shape of a

keystone.

For detailed projection distance values sp. 68

Connecting the power cable

Connect the power cable. Open the lens cover.

Lit orange

SourcePower

Volume

Enter

Return

Disc Playback

Playing a disc and projecting

Insert the disc into its slot by facing the

disc label upward.

If you are using a dual-side disc, face the side you

wish to play upwards.

Insert an 8-cm disc into the disc slot center

position.

A short beep sounds and the power comes on.

Inserting the disc makes the Disc indicator light up

green.

Start playback.

The projection lamp lights up automatically, and

projection begins. It takes approximately 30

seconds from when the lamp lights up until the

image is projected brightly.

Quick Start

When the Menu appears:

p. 26

sp. 27

sp. 29

When using this unit at high altitudes, that is 1500

m or more above sea level, set “High Altitude

Mode” to “On”.

sp. 56

Caution

Never look at the lens after you have turned the unit power

switch to On.

Close the lens cover before inserting or ejecting a disc.

Adjusting the projection position and volume

Adjust the volume and image being projected.

Fine-tuning the projection size (Zoom button)

To increase the size, press the “W” side.

Focusing (Focus ring)

To decrease the size, press the “T” side.

Volume control (Volume)

Using the main unit Using the

remote control

Correcting keystone distortion of the image (Keystone)

To raise the position of the projected image on

the screen, extend the front adjustable feet by

turning them.

Quick Start

Adjust the feet in such a way that the unit is level.

You can adjust the feet on the projection lens side

only.

If you extend the foot and tilt the unit, the image will have keystone distortion.

Reshape the keystone distortion as follows:

When the top of the image is wide When the bottom of the image is wide

Adjustment on the main unit

If the unit is tilted by up to 15° degrees in an upward or downward orientation, you can correct the image shape.

However, it will be difficult to focus if the tilt angle is large.

Using the remote control

Adjustment on the main unit

Using the remote control

Stopping playback

• You cannot use the resume play during program

play.

• The position from where playback resumes may

be slightly different to where playback was

stopped.

• The audio language, subtitle language, and angle

settings are memorized along with the stopping

position.

• If you stop play when the disc menu is displayed,

the resume play may fail.

Turning off the power

When you have played back a disc,

press to eject the disc from its slot.

Press .

If the lamp was on, the lamp turns off

and the Power indicator on the main unit flashes orange (during cool-down).

Press .

stopping, when you press , playback is

resumed from the interrupted scene (resume).

Notes on resume play

• You can resume playing up to 10 discs that you

have recently played even if you replace the

discs.

• If you press when “Loading” is displayed

on the screen, “Resume Play” is displayed and

the disc is played from the last stop position.

• Remember that the resume play function is

canceled if you press to turn the power off or

press

• You cannot resume playing a disc indicated as

formatted .

• If the disc does not support resume play, the

icon is displayed on the screen when you press

twice.

on the File List and on VR

After

The confirmation buzzer beeps twice to

indicate that cool-down has completed. Unplug the power cable from the electrical outlet.

If you only press to turn off the power,

electricity continues to be consumed.

Close the lens cover.

Keep the lens cover in place when the unit is not

being used to protect the lens from dirt and

damage.

The Power indicator flashes orange to indicate

that the internal lamp cooling function (cool-

down) is taking place. The buttons on the remote

control and the main unit are disabled when

cool-down is taking place (approx. 5 seconds).

Do not unplug the power cable during cool-down. This

may reduce the lifespan of the lamp.

Basic Playback Operations

From here on, operations are explained primarily using the buttons of the remote control. You can also use the buttons

with the same markings as those on the unit control panel to achieve the same effect.

Set the [Function] position before performing operations

Pause

Press during playback.

• Press on the operation panel. The play is

paused and restarted each time you press .

• To resume playback, press .

Reverse search/forward search

Press or during playback.

• There are five levels of reverse/forward search

speeds that change each time the buttons are

pressed.

Quick Start

• Press to return to normal playback.

Depending on the disc you use, the sound may

not be audible during forward/reverse search.

Set the [Function] position before performing operations

Skip

Press or during playback or when paused.

If you press once

during chapter/track playback, playback returns to

the start of the chapter or track being played. After

this, playback returns to the start of the previous

chapter/track each time you press . After this,

playback returns to the start of the previous chapter/

track each time you press .

• If you press / once when a

disc is being paused, the

previous chapter (file) or the next chapter

(file) is played.

Frame advance

Press during paused playback.

• A single frame is advanced each time you press

. This unit does not have a frame return

function.

• Press to return to normal playback.

Slow motion playback

Press at the point where you want

to begin slow motion playback in order to pause the image.

Press .

• There are 4 levels of playback speed, selectable

each time is pressed.

• When playing a , slow motion review

can be performed by pressing . There are 4

levels of rewinding speed that change each time

is pressed.

• Press to return to normal playback.

•

No sound is output during slow motion playback.

Temporarily using the projector’s light as illumination (Break)

While the color mode name is displayed,

press repeatedly until the desired color mode appears.

After waiting a few seconds, the color mode

name disappears and the picture quality changes.

The break function is useful if, in the middle of a

movie, you want to get up or move around, get a drink,

or some food, and so on. By simply pressing the

button you can pause the disc being played until you

can get up to turn the lights on in the room.

Press during playback.

• The projection lamp remains lit, whilst the

projected image disappears. flashes in the

lower right portion of the screen.

• The screen darkens after about five minutes if

the unit is left in break mode without any

operations being made. Additionally, after

approximately 30 minutes have elapsed, power

to the unit automatically turns off.

• Press to return to the state before the break

button was pressed. If the power has switched

off, press to switch the power back on.

: Suitable for use in a

bright room with the

outside light shielded.

: Suitable for use in a

room with dim lighting

(Default setting).

: Suitable for use in a

pitch-dark room.

: Suitable for playing a

game with high speed

movement in a bright

room with the outside

light shielded.

Quick Start

• Operations cannot be performed when the disc

menu is displayed.

• When you press any of the following buttons,

break mode is cancelled and the function of

the button you pressed is performed.

, , , ,

Color Mode

You can select a picture quality to correspond to the

brightness and other conditions of your room.

Press .

The currently selected color mode name is

displayed on the screen.

Mute

Press during playback.

• Sound stops coming from the speakers and

headphones.

• Press to return to normal playback. The

former volume is also restored when power to

the unit is turned on again.

Advanced Operations

Becoming a playback expert

Playback from a DVD menu

Some discs have the following kinds of original menus saved in

them.

• Root Menu: When multiple titles (image and audio) have been

recorded, this integrated disc information is displayed.

• Menu: Title-specific playback data (chapter, angle, audio, and subtitle

menus) is displayed.

Press or during playback.

Press and select the item you want to

see.

You can also select the title number or chapter number directly using the

numeric buttons.

When using the numeric buttons

With the function/numerics toggle switch in the [1 2 3] position, press the

following buttons.

Example)

5: 10: _

15: _ 20: _

Once you have finished entering numbers, return the function/numerics toggle

switch back to the [Function] position.

Press .

• Certain discs may not contain a menu. If a menu is not recorded, these

operations cannot be executed.

• Depending on the disc, playback may begin automatically, even if

is not pressed.

Playback a Video CD from the menu

You can play a disc by selecting the desired chapter from any of the

following two menus.

• PBC (Playback control) function: If a Video CD with “PBC (playback

control) enabled” specified on the disc or jacket is inserted into the

disc slot, a menu screen is displayed. You can select the scene or

information you wish to see interactively from this menu.

• Preview function: You can select the desired track or scene and play

it back in the following three formats.

Track Digest: Plays the first three or four seconds of each track sequentially.

Six tracks are projected on a single screen page.

Disc Interval: The total disc time is divided by six, and the first three or four

seconds of each interval are played. Six images are projected on a

single screen page.

Track Interval: When a track is being played, it is divided by six and the

first three or four seconds of each interval are played. Six images

are projected on a single screen page.

Advanced Operations

PBC (playback control) playback

When playing a Video CD that contains PBC, the following

kind of menu is displayed.

Select the item you want to see using or the

numeric buttons.

The selected contents are played.

sp. 26

To turn to the previous/next page of the menu screen

Press / when the menu screen is displayed.

To call the menu screen during playback

Each time is pressed, the menu goes back by one step. Press repeatedly

until the menu is displayed.

To call the PBC menu screen

When you display the playback information or the preview screen, the PBC mode is

canceled.

To call the PBC menu again during play, stop play by pressing twice. Then,

press .

If you select “Others” from the settings menu and set “PBC” to “Off”, the

disc is played directly without displaying the menu screen. PBC is “On” by default. sp. 52

To play using the Preview function

If you press while a video CD is playing, the following

Preview menu is displayed.

• You can also use Track Digest and Disc Interval by pressing when

stopped.

Select an item by pressing , and press .

• If a disc contains six or more tracks, you can press to display

the next or previous page when you select Track Digest.

• You can return to the initial menu by selecting “Menu” and pressing

• You can close the Preview menu by selecting “Exit” and pressing .

Select the track you want to see using ,

and press .

The selected track is played.

JPEG, MP3/WMA and DivX® playback

Set the [Function] position before performing operations

Although the , or files stored in a disc and a USB storage device are played back by selecting the desired file from a File List, the function varies depending on the file, as follows.

• If a folder is selected, the JPEG files in the folder are played

back in Slideshow sequence. If a file in the folder is selected, the JPEG

files stored in the folder are played back starting from the selected file

in Slideshow sequence.

• files are automatically played back, starting from the first

file. If you want to play back another file, select a file from the File List

displayed.

If a Kodak Picture CD or FUJICOLOR CD is inserted into the disc slot,

Slideshow playback is automatically performed.

When you play back a disc containing , or

is displayed.

files, or a USB storage device, the following File List

Advanced Operations

Select a folder or file using .

• When the File List is displayed, you can go to the next or previous page

by using . When you are on the first page, the button is

ineffective and vice versa.

Press or to begin playback.

If is pressed while playing back , , Kodak Picture

CD or FUJICOLOR CD, the display returns to the File List.

• If is displayed, you will return to the File List when you press

twice.

• When you select “Others” from the settings menu and set the “MP3/

JPEG Nav” to “Without Menu”, all MP3, WMA, JPEG and DivX

are listed. “With Menu” is set by default.

• MP3/WMA ID3 tag is supported. The album name, artist name, and

track name, if set, are displayed at the right of the File List (only

alphanumeric characters are supported).

sp. 52

Slideshow Playback Operation

• The image switching interval depends on the selected image size.

• The Slideshow ends after projection of all JPEG files in the folder.

• You can rotate an image by pressing .

• You can reverse the top and bottom of an image by pressing .

• You can reverse the right and left of an image by pressing .

• If you press during Slideshow playback, the Slideshow is

canceled and the thumbnail list is displayed.

files

• If you press during Slideshow playback, the File List is displayed.

If you select the desired JPEG file or folder from the list and press

, the Slideshow will start.

• A progressive JPEG file takes a longer time to start when compared

with a baseline JPEG file.

• The JPEG files stored in a USB storage device are also played in the

Slideshow.

Operations from the thumbnail list

• If a disc contains 12 or more JPEG files, you can display the previous

or next page using .

• When you select the desired thumbnail and press , the Slideshow

restarts from the selected position.

• When you press , the File List is displayed. If you select the

desired JPEG file or folder from the list and press , the Slideshow

will start.

When playing MP3/WMA audio

Once menu selection is complete and the audio begins, close the lens cover.

The projection lamp turns off and you can enjoy just the music being played.

Open the lens cover to turn the lamp back on.

Simultaneous MP3/WMA and JPEG playback

If a disc contains a mix of MP3/WMA and JPEG files, you can enjoy the

Slideshow with sounds.

When a disc containing both MP3/WMA and JPEG files is inserted into the disc slot, the MP3/WMA files are automatically played. If a JPEG file or folder from the File List displayed is selected, the Slideshow will start.

• The Slideshow ends after projection of all JPEG files in the folder.

• When you press during simultaneous file play, the Slideshow is

canceled and the file thumbnail list is displayed. When you select the

desired thumbnail from its list and press , the Slideshow restarts

from the selected position.

Advanced Operations

• You can return to the File List screen by pressing during

simultaneous file play. You can select the desired MP3/WMA file and

press . Then, when you select a JPEG file or folder for Slideshow

and press , the selected items are played back simultaneously.

• If a USB storage device has both MP3/WMA and JPEG files, you can

also enjoy the Slideshow with sound.

Notes on playback

• Depending on the recording and the characteristics of the disc it is possible that

the disc may not be readable, or that disc reading may take some time.

• The time it takes to read a disc differs depending on the number of folders or files

recorded on the disc.

• The order of the File List displayed on the screen may differ from the order

displayed on the computer monitor.

• Files of a commercial MP3 disc may be played in the different order from those

recorded on the disc.

• It may take some time to play MP3 files containing still picture data. The time-

elapsed is not displayed until playback has commenced. Further, there are times

when an accurate elapsed time is not displayed, even once playback has

commenced.

• It is possible that data that has been processed, edited, or saved using computer

image editing software might not play.

Playback by selecting the chapter or track number

During playback or when paused, select the chapter or track number you wish to play by pressing the numeric buttons.

s “When using the numeric buttons” p. 26

• Can also be used when stopped.

• Depending on the disc, certain operations may not be possible.

Repeat play and random play

Set the [Function] position before performing operations

Depending on the type of disc, you can loop playback within a range of titles,

chapters, or tracks, as in the table below.

Press during playback.

The repeat mode changes whenever you press and the repeat mode

name and icon are displayed on the screen.

• is not available when playing back using the PBC function.

Screen display

Chapter

Title

Shuffle

Shuffle Repeat

Repeat Off

Function Contents

Chapter repeat Repeats the current chapter.

Title repeat Repeats the current title.

Random play Randomly plays titles and chapters.

Random repeat

Repeat Off Cancels repeat or random play.

Repeats random play. Tracks are played in a

different order when repeated.

Screen display

Track

All

Shuffle

Shuffle Repeat

Repeat Off

Function Contents

Track repeat Repeats the current track.

Disc repeat Repeats entire tracks of the disc.

Random play Randomly plays all tracks of the disc.

Random repeat

Repeat Off Cancels repeat or random play.

Repeats random play. Tracks are played in a

different order when repeated.

(If “Others” is selected from the settings menu and if “MP3/JPEG Nav” is

set to “With Menu”)

Screen display

Repeat One

Repeat Folder

Shuffle

Repeat Off

Function Contents

File repeat Repeats the current file.

Folder repeat Repeats files in the current folder.

Random play Randomly plays files in the current folder.

Repeat Off Cancels repeat or random play.

(If “Others” is selected from the settings menu and if “MP3/JPEG Nav” is

set to “Without Menu”)

Screen display

Repeat One

Repeat All

Shuffle

Repeat Off

Function Contents

File repeat Repeats the current file.

Disc repeat Repeats all files on the current disc.

Random play Randomly plays all files on the disc.

Repeat Off Cancels repeat or random play.

Canceling repeat play

Press repeatedly until “Repeat Off” is displayed on the screen.

Advanced Operations

• does not allow use of the “Title repeat” function with some

DVDs.

• You can also repeat the play from the playback information screen.

sp. 37

• The button is ineffective during program play.

Program play

Set the [Function] position before performing operations

You can set titles, chapters, and tracks to playback in your order of preference.

Press during play or when paused.

The program screen will appear for you to set a playback sequence.

Using the numeric keys, enter title and track/chapter

numbers sequentially.

s “When using the numeric buttons” p. 26

• Use to shift the cursor in respective directions.

• If the disc has 10 or more tracks/chapters, either press or select

“Next” on the screen and press to display the next page. To display

the previous page, either press or select “Previous” on the screen

and press .

• If you wish to delete a track or chapter you have entered, position the

pointer on it and press .

• To close the program screen, select “Exit” from the program screen and

press .

When you have set the playback sequence, select “Start”

from the screen and press .

• Playback starts in the set sequence.

• Once the set playback is fully complete, playback stops.

Canceling all set items on the program screen

• Press .

• Turn the power switch off.

Resuming normal playback

Stop play and press .

Zoom In

• You can set the program play of up to 10 discs. Also, you can set up to

20 tracks or chapters of each disc. Your settings are held in memory even

when you have changed the discs. Insert the disc with the playback

sequence set in the disc slot, press , and select “Start” from the

program screen. Program play starts.

• If you have stopped the program play, you cannot resume play.

• You may not use the program play for some types of discs.

Set the [Function] position before performing operations

You can zoom (enlarge or compress) the projection image on the unit screen. If

the enlarged image exceeds the screen size, you can display it by panning.

Press during playback.

The magnification (or zoom rate) is displayed.

Select the desired magnification by pressing

repeatedly.

• You can only enlarge images. You cannot reduce them.

• After you have enlarged the image, press to pan.

• To return to the original size, select “1” or “100%” by pressing

repeatedly.

Advanced Operations

Changing the audio language

When a disc has been recorded with multiple audio signals or languages, you

can switch to the available audio signal or language of your preference.

Press during playback.

The current audio settings are displayed on the screen.

Select the desired settings by pressing repeatedly.

• You can also switch from the playback information screen. sp. 37

• If a language code (for example 6978) is displayed sp. 53

Changing the subtitles display

You can choose whether or not to display subtitles for discs that have been

recorded with subtitles. If a disc has multiple language subtitles, you can

switch to the preferred language.

Press during playback.

The current subtitle settings are displayed on the screen.

Select the desired settings by pressing repeatedly.

• If the available subtitle is not found, the icon is displayed.

• You can also switch from the playback information screen.

• When using , you can switch between the embedded subtitle

and the subtitle file data. Both of them can be displayed with 45 single-

byte characters (27 double-byte characters) on 2 lines maximum. Any

excess characters are not displayed.

A subtitle file with any of the following extensions is valid:

“.srt”, “.smi”, “.sub”, “.ssa” and “.ass”;

The subtitle file name must be the same as the file name of the movie.

sp. 37

Changing the angle

For discs that have been recorded with multiple camera angles, you can switch

from the main angle to a different camera angle of your preference, such as

from above, or from the right, during playback.

Press during playback.

The current angle is displayed on the screen.

Select the desired angle by pressing repeatedly.

You can also switch from the playback information screen. sp. 37

Advanced Operations

Carrying out operations from the playback information screen

et the [Function] position before

performing operations

You can check the current playback status and change your settings without

stopping the play.

Press during playback.

The projected image is reduced, and the following information screen is

displayed under it.

•

When you are using a , the playback time is switched as

follows each time you press : “Single Elapsed”

“Single Remain” _ “Total Remain”

“Total Elapsed”

• When you are using a , the playback time is

switched as follows each time you press : “Total Elapsed” _

“Total Remain” _ “-:--:--” (WMA does not support for Track Time)

Pressing , position the pointer on the desired

item and press

• You can set the title/chapter/track number and time by using the

numeric keys, and set the play start time.sp. 26

• When the selected item appears, select the desired value using

and press .

• Press once and the playback information screen disappears.

• When you are using and “-:--:--” is displayed, you can set the

play start time of the track by using numeric keys.

• You cannot use this function when play is stopped.

Press .

Playback starts with the selected title/chapter/track or specified time

settings.

Contents on the playback information screen

Title

Chapter

Audio

Subtitle

Angle

TT time

Ch time

Repeat

Time Disp.

Track

Disc Time

Track Time

Repeat

Time Disp.

Specify a title number you wish to play by using the numeric keys.

Specify a chapter number you wish to play by using the numeric

keys.

Select the sound system and the language.

Select to display or not display subtitles and language.

You can switch the camera angle.

Set the play start time of a title using the numeric keys.

Set the play start time of a chapter using the numeric keys.

Select the repeat play mode.

Select how to display the play time at bottom right of the playback

information screen.

Specify a track number you wish to play using the numeric keys.

Set the play start time of a disc using the numeric keys.

Set the play start time of a track using the numeric keys.

Select the repeat play mode.

Select how to display the play time at bottom right of the playback

information screen.

*You cannot select random play or random repeat for the repeat setting on the

playback information screen. Set it up using . sp. 32

Setting the sleep timer

Set the [Function] position before performing operations

When the time you set on the sleep timer has passed, the unit power switch is

turned off automatically. You can prevent unnecessary power from being

consumed if you fall asleep while watching a movie.

If the sleep timer is set to “Sleep Off” and if play is stopped or finished and the

unit is not operated for approximately 30 minutes, the unit power switch is

turned off automatically.

Press .

• When you press , the current sleep timer setting is displayed.

When the sleep timer is displayed, select the desired setting using

: If the standby screen is projected and if

the unit is not operated for approximately

30 minutes, its power switch is turned off

automatically. If image signals are not

entered in mode and if the unit

is not operated for approximately 30

minutes, its power switch is turned off

automatically (default setting).

: After 10 minutes have elapsed, the power

switches off.

Advanced Operations

: After 150 minutes have elapsed, the power

switches off.

Setting the sleep timer

The “Sleep” message is displayed on the screen approximately 20 seconds before

automatic power off.

Changing the sleep timer

Press repeatedly and select the new time.

Checking the sleep timer setting

Once the sleep timer has been set, if you press once, the remaining time before

sleep is displayed on the screen.

• Sleep timer settings are not memorized. If the power is switched off, the

sleep timer is canceled.

• With discs that return to the menu once playback has completed, power

to the unit will not turn off even when the “Sleep Off” mode is set.

Changing the aspect ratio

Set the [Function] position before performing operations

The unit automatically recognizes the aspect suitable for the input signal, and

the image is projected in the appropriate aspect. If you want to change the

aspect yourself, or if the aspect is not correct, you can change it in the

following way.

Press .

• Each time you press the aspect ratio name is displayed on the

screen and the aspect ratio is changed.

• The aspect ratio for disc settings and image signals can be changed in

the following way.

When projecting by using the built-in DVD player

Screen Size Aspect

16:9 Fixed to full size (16:9)

4:3 Normal Full Zoom

Letterbox Normal Full Zoom

* Fixed to normal size when the Slideshow is executed.

When projecting component video (SDTV), composite video images

Screen Size Aspect

4:3 Normal Full Zoom

Letterbox Normal Full Zoom

When projecting component video (HDTV) images

Screen Size Aspect

16:9 Fixed to full size (16:9)

Advanced Operations

When projecting computer images

Wide panel computer images are always projected at the normal (wide screen) setting.

If wide panel computer images are not projected in the correct aspect, press the button to change to an appropriate

aspect.

Playback by attaching a peripheral device

Connecting a USB storage device

You can attach a USB memory or multicard reader that conform to the USB 1.1 to the unit and play the following format

files.

• MP3/WMA files

• JPEG files

• DivX

The file playback and your operations during play are the same as when you play files of a using the standard

DVD player.

files

• When you connect a USB storage device to the unit, the source is changed to the USB and playback starts

automatically when:

- a disc is being played or stopped on the standard DVD player.

- another video device, a TV set or a computer is connected to the unit and a disc is being played or stopped.

• If you use a USB hub, the unit will not operate normally. Connect the USB storage device directly to the unit.

Do not remove the USB storage during a Slideshow. Stop the Slideshow by pressing , and remove the USB storage.

Connecting to another video device, a TV set, or a Computer

Video

Cb/Pb

Cr/Pr

Audio

Compo

Aside from the built-in DVD player, this unit can project images by connecting to a computer or the following devices

with a video output port.

- Video recorder - Game machine - Video device with built-in TV tuner - Video camera and others

Video equipment signal format

The kind of video signal that can be output depends on the video equipment. The image quality differs depending on the video

signal format. Generally speaking, the order of quality of the image goes as follows.

1. Component video _ 2. Composite video

Check which signal system to use in the “Documentation” supplied with the video equipment that is being used. The composite

video may be called “Image output”.

If the equipment you are connecting has a unique connector shape, connect using the cable supplied with your

equipment, or an optional cable.

• Turn off connected equipment. Damage may result if you try to connect when the power is on.

• Close the lens cover before connecting a device to the unit. If fingerprints or marks are left on the face of the lens, the image will

not be projected clearly.

• Do not try to force a cable plug with a different shape the port. This may damage the unit or the equipment.

Connecting with a video cable

Yellow

White

Vid eo

Audio

Output

To Video output port

To Video input port (Yellow)

To Audio out port

Video/audio cable (commercially available)

Red

To Audio input port

Advanced Operations

Connecting with a component video cable

Video

Cb/Pb

Cr/Pr

Audio

Component

Video

Cb/Pb

Cr/Pr

Audio

Component

To Audio input port

White

Output

To Audio out port

Audio

For a D port output device, use a commercially available D port - component conversion cable.

Connecting with a computer

Red

RCA audio cable (commercially available)

Component video cable (commercially available)

To PC input port

To Audio input port

White

Red

2RCA Stereo mini-pin audio cable (commercially available)

To Audio out port

To display output port

Computer cable (commercially available) (Mini D-Sub 15-pin Mini D-Sub 15-pin)

Use a cable marked “No resistance” when you use a commercially available 2RCA stereo mini-plug audio cable.

Projecting images from external video equipment or a computer

Open the lens cover and press .

When you press , the following menu appears on the

screen.

The orange pointer points to the currently selected source. Select the

desired source by pressing , and press .

Turn the device power switch on, and press the [Play] or

[Playback] button on the video device.

If the lamp was off, it comes on automatically.

After a moment, the image is projected.

To return to the standard built-in DVD player

Make any of the following operations.

• Press .

• Insert a disc into the disc slot.

• Select “DVD/USB” by pressing .

• Press .

Advanced Operations

When a computer image is not projected

You can switch the image signal destination from the computer by holding

down and pressing (the key is usually labeled or ). s Computer “Documentation”

After switching, wait a few seconds for projection to start.

Examples of Switching Output

Epson Toshiba

NEC IBM/Lenovo

Panasonic Sony

SOTEC Dell

HP Fujitsu

Macintosh Set mirroring or display detection.

Depending on your OS, you can set them by pressing

Depending on the computer, each time the key to change the output is pressed,

the display status may also change as follows.

Computer only Screen only Both

Audio Settings

Listening with headphones

Caution

• When listening with headphones, make sure the volume is not too high. You may damage your hearing when

listening to sounds at high volume over an extended period of time.

• Do not set the volume too high from the outset. A loud sound may be produced suddenly that may cause damage

to your headphones or your hearing. As a precaution, lower the volume before you switch off this unit then raise it

gradually after you switch it back on.

Connecting commercially available headphones.

Advanced Operations

To jack

Headphones

Once you have connected your headphones to the headphone jack, no sound will come from the speakers.

Connecting to audio equipment with a digital coaxial audio input port

Digital Coaxial

Audio-Out

You can connect to AV amplifiers and equipment capable of producing digital recordings when they are equipped with a

digital coaxial audio input port. When connecting, use a commercially available digital coaxial cable.

Fully plug the audio cable connector into jack.

To a digital coaxial

AV amplifier

audio input port

Digital coaxial cable (commercially available)

The signal being output from the Digital Coaxial Audio-Out port is changed with the “Digital Output” setting in the settings menu. For detailed output signal information sp. 54

Selecting the Surround Sound mode

Set the [Function] position before performing operations

When you turn the virtual surround sound system on, you can enjoy real stereo

surround sound using the left and right speakers only although sound is usually

provided through multiple speakers.

Press .

The current settings are displayed on the screen.

To Digital Coaxial Audio-Out port

Select the desired settings by pressing repeatedly.

: Stereo mode (default setting)

: Virtual surround sound mode

Selecting the digital sound effects

Set the [Function] position before performing operations

You can select the sound effects appropriate to the musical genre of the current

disc.

Press .

The current settings are displayed on the screen.

Select the desired settings by pressing repeatedly.

The sound effects, which you can select according to the inserted disc or

the connected source, are switched as follows:

Concert _ Drama _ Action _ Sic-Fi (Science Fiction)

Other discs

Classic _ Jazz _ Rock _ Digital

Advanced Operations

Select “Concert” or “Classic” sound effects for flat sound output.

Settings and Adjustments

Setup Menu Operation and Functions

The settings of this unit can be adjusted to suit the environment in which it is used.

Using the setup menu

Press during playback or when stopped.

The following setup menu is displayed.

Press and select the desired icon.

Language setup

Audio setup

Others setup

Press to select the item to be set, and then

press .

The settings are displayed on the right.

Select the setting you wish to change, and press .

To display other setting pages, select a desired icon by repeatedly

pressing .

After setup is complete, press to close the setup menu.

Setup menu list

Boldface is the default.

Language page

Setting Item Setting Contents

Disc Menu

Select the DVD video menu language.

Audio

Select the DVD video soundtrack language.

Subtitle

Select the DVD video subtitle language.

DivX Subtitle

Select a font type that supports the DivX subtitle.

OSD Language

Select the menu language (for setup and visual setup).

For “6978” and other language codes, see the “Language code list”.sp. 53 These settings become available when settings have been recorded on the disc itself. If they have not been recorded, the setting contents become available. If the language selected is not recorded on the disc, the default language for that disc is used.

Central Europe, Cyrillic, Greek, Standard, Hebrew, Chinese, Korean Select the “Standard” to display the standard list of Roman subtitle fonts already installed on the unit.

English

Settings and

Adjustments

Audio page

Setting Item Setting Contents

Digital Output

Select the kind of output signal according to the equipment connected to the Digital Coaxial Audio-Out port. For detailed information sp. 54

Night Mode

Compensates for the variation in the way we hear loud and quiet sounds when playing back at low volume. Only available for DVD videos that have been recorded in Dolby Digital. Turn the Dolby Digital mode “On” if the volume of voices in the movie is low.

Others page

Setting Item Setting Contents

Screen Saver

Set whether or not to start the screen saver function if play has stopped and a still image is projected for approximately 15 minutes without any unit operation.

PBC

Set to activate the PBC or cancel it during play

of .

DivX

VOD code

The registration codes required for video ondemand service are provided.

MP3/JPEG NAV

Display of hierarchical menu including folders.

Default

Resets all settings to their initial states, except for your “Disc Lock” password of the setup menu and “Reset Lamp Hours” of the visual setup menu.

Password

Set your password when you play a disc protected with a “Disc Lock.”

Disc Lock

If you have locked a disc with the Disc Lock function, you will need to enter your password to play the disc. You can protect discs from unauthorized play. You can lock up to 40 discs.

Stream: Use when connected to a DTS/Dolby Digital Decoder,

or when connected to equipment with these functions.

PCM: Use when connected to equipment that is only

compliant with Linear PCM.

On: Reduce the loudness but increases volume of quieter sounds.

Off: Use this option to enjoy stereo surround sound.

On: The Screen Saver function starts.

Off: The Screen Saver function does not start.

On: Starts to play with PBC active. When is played, its

menu screen appears.

Off: Starts to play with PBC inactive. The first and subsequent

tracks are played sequentially.

Press and check your registration code that is displayed.

After checking, press .

Using your registration code, you can purchase or rent videos

provided by DivX vod).

Without Menu: Displays all , and files

With Menu: Displays the menu containing folders.

Press and press to start initialization.

Using the numeric keys of the remote control, enter your 6-digit password in the “Old Password” column. When you enter a password for the first time, enter “000000”. Enter a new 6-digit password in the “New Password” column. Enter the new 6-digit password again for confirmation in the “Confirm PWD” column.

When you press , your new password is registered.

If you cannot remember your password, simply enter “000000” in the “Old Password” column.

Lock: Locks playback of the currently inserted disc. You

Unlock: Allows playback of all discs.

video on-demand services (www.divx.com/

contained on a disc.

will need to enter the 6-digit password to play it.

Language code list

Abkhazian 6566 Gaelic; Scottish Gaelic 7168 Magyar 7285 Sinhalese 8373

Afar 6565 Gallegan 7176 Malayalam 7776 Slovensky 8373

Afrikaans 6570 Georgian 7565 Maltese 7784 Slovenian 8376

Amharic 6577 Gikuyu; Kikuyu 7573 Manx 7186 Somali 8379

Arabic 6582 Guarani 7178 Maori 7773 Sotho; Southern 8384 Armenian 7289 Gujarati 7185 Marathi 7782 South Ndebele 7882 Assamese 6583 Hausa 7265 Marshallese 7772 Sundanese 8385

Avestan 6569 Herero 7290 Moldavian 7779 Suomi 7073

Aymara 6589 Hindi 7273 Mongolian 7778 Swahili 8387

Azerhaijani 6590 Hiri Motu 7279 Nauru 7865 Swati 8383

Bahasa Melayu 7783 Hrwatski 6779 Navaho; Navajo 7886 Svenska 8386

Bashkir 6665 Ido 7379 Ndebele, North 7868 Tagalog 8476

Belarusian 6669

Bengali 6678 Interlingue 7365 Ndonga 7871 Tajik 8471

Bihari 6672 Inuktitut 7385 Nederlands 7876 Tamil 8465

Bislama 6673 Inupiaq 7375 Nepali 7869 Tatar 8484

Bokmål, Norwegian 7866 Irish 7165 Norsk 7879 Telugu 8469

Bosanski 6683 Íslenska 7383 Northern Sami 8369 Thai 8472

Brezhoneg 6682 Italiano 7384 North Ndebele 7868 Tibetan 6679

Bulgarian 6671 Ivrit 7269 Norwegian Nynorsk; 7878 Tigrinya 8473

Burmese 7789 Japanese 7465 Occitan; Provencal 7967 Tonga (Tonga Island) 8479

Castellano, Enpañol 69 83 Javanese 7486

Catalán 6765 Kalaallisut 7576 Oriya 7982 Tswana 8478

Chamorro 6772 Kannada 7578 Oromo 7977 Türkçe 8482

Chechen 6769 Kashmiri 7583 Ossetian; Ossetic 7983 Turkmen 8475

Chewa; Chichewa;

Nyanja

Chuang; Zhuang 9065 Khmer 7577 Persian 7065 Ukurainian 8575

Church Slavic; Slavonic 6785 Kinyarwanda 8287 Polski 8076 Urdu 8582

Chuvash 6786 Kirghiz 7589 Português 8084 Uzbek 8590 Corsican 6779 Komi 7586 Pushto 8083 Vietnamese 8673

Dansk 6865 Kuanyama; Kwanyama 7574 Quechua 8185 Walloon 8765

Deutsch 6869 Kurdish 7585 Raeto-Romance 8277 Welsh 6789

Dzongkha 6890 Lao 7679 Romanian 8279 Wolof 8779

English 6978 Latina 7665 Rundi 8278 Xhosa 8872

Esperanto 6979 Latvian 7686 Samoan 8377 Yiddish 8973

Estonian 6984 Letzeburgesch; 7666 Sango 8371 Yoruba 8979

Euskara 6985 limburgan; limburger 7673 Sanskrit 8365 Zulu 9085

Faroese 7079 Lithuanian 7684 Serbian 8382

Français 7082 Luxembourgish; 7666 Shona 8378

Frysk 7089 Macedonian 7775 Shqip 8381 Fijian 7074 Malagasy 7771 Sindhi 8368

7889 Kazakh 7575 Pali 8073 Twi 8487

9072 Kernewek 7587 Panjabi 8065 Uighur 8571

6783 Korean 7579 Russian 8285 Volapuk 8679

6976 Lingala 7678 Sardinian 8367

Interlingua

(International)

7365 Ndebele, South 7882 Tahitian 8489

Old Bulgarian; Old

Slavonic

6785 Tsonga 8483

Settings and

Adjustments

“Digital Output” settings and output signals

Playback Disc

Linear PCM DVD video Linear PCM Stereo

DTS DVD video DTS bit stream 48 kHz, 16 bit linear PCM

Dolby digital DVD video Dolby digital bit stream 48 kHz, 16 bit stereo linear PCM

Audio CD, Video CD, SVCD 44.1 kHz, 16 bit stereo linear PCM/48 kHz, 16 bit linear PCM

DTS Audio CD DTS bit stream 44.1 kHz, 16 bit linear PCM

MP3/WMA disc 32/44.1/48 kHz, 16 bit linear PCM

Stream PCM

“Digital Output” Settings

Operations and functions on the Visual Setup menu

You can adjust the brightness, contrast, and other values of the projected image.

Operations on the Visual Setup menu

Press during projection.

The following menu is displayed.

Press to select the item to be set, and then

press .

Press to select the item to be set, and then

press to adjust.

• When options are displayed, select a desired option and press to

enable it.

After setup is complete, press to close the menu.

Settings and

Adjustments

Visual Setup menu

Image page

Setting Item Setting Contents

Brightness Adjusts the image brightness.

Contrast Adjusts the difference between light and shade in the images.

Color Saturation Adjusts the color saturation for the images. (This is not displayed

when a computer is connected.)

Tint Adjusts the image tint. (This is not displayed when the external

video or computer connected is not NTSC.)

Sharpness Adjusts the image sharpness.

Color Temp. Adjusts the entire image tint.

High: Makes the image bluish. Low: Makes the image reddish.

Progressive

Converts the interlace signals into progressive signals appropriate to the current picture.

Can only be set when one of the following five signals is input: 480i, 576i and 1080i in component video, or NTSC and PAL in composite video. Off: Suitable for fast action images. Video: Suitable for ordinary video images. Film/Auto: Uses 2-3 pull-down mode and converts 24/30-frame

movie film, CG and animation images into appropriate progressive signals to produce natural image quality.

Option page

Setting Item Setting Contents

Video Signal

Sets the signal format of the video equipment connected to the Video input port.

Child Lock

Use on the main unit to lock the poweron.

Ceiling Projection On: Projects images onto the ceiling using the mirror.

High Altitude Mode

Set this mode when you use this unit at high altitudes.

Zoom

Select W/T on the operation panel of the main unit.

Only displayed when “Video” is selected as the source. At the time of purchase, this is set to “Auto” so the video signal is recognized automatically. If interference appears in the projected images or no images appear when you select “Auto”, select the appropriate signal manually.

On: Starts the Child Lock. To turn the power supply on, hold

down on the main unit for approximately 5 seconds or

hold down on the remote control.

Off: Cancels the Child Lock.

Off: Deactivates the ceiling projection.

When using this unit at high altitudes, that is 1500 meters or more above sea level, turn this mode “On”.

Adjusts the image size. Wide: Enlarges the image. Tele: Reduces the image.

Info page

Item Contents

Information

Displays the current status.

Reset Lamp Hours

Lamp Hours: Total usage time of the lamp. 0H is displayed for 0 to 10 hours. Changes to units of

1 hour at 10 hours and above. The display turns yellow text when it is time to change the lamp.

Source: Displays whether standard DVD player images are being projected, or images from

external video equipment or a computer are being projected.

Video Signal:This is displayed when “Video” is selected as the “Source”, and displays the format

of the video signal being input.

Resolution: The resolution is displayed if the “Source” is other than “Video”. The resolution of

image signals from a computer and the component video signals that are being input are displayed.

Status: Displays any error information. You may be asked for this information when you

contact your service center.

After you have replaced the unit lamp, initialize the lamp hour settings. The accumulated lamp operating time is cleared.

Settings and

Adjustments

Appendix

Troubleshooting

Reading the indicators

You can check the status of this unit using the

indicators on the top panel.

Check each condition in the following table and follow

the steps to remedy the problem.

* If all indicators are not lit, the power cable is not

connected correctly or the unit is not powered.

Powe r

Source

When lights on red

Red

Internal failure

Wait for approximately 1 minute and 30 seconds. Then, disconnect and reconnect the power cable.

If the indicator status does not change when

is pressed and the power turned on...

Fan related error/Sensor error

High temperature error (overheating)

The lamp turns off automatically and projection stops. Wait for approximately 5 minutes. When the Power indicator color changes to orange, check for the 3 points shown at right.

Error

Disconnect the power cable from the electrical

If the error continues

outlet and contact your dealer.

Wait for approximately 1 minute and 30 seconds. Then, disconnect the power cable from the electrical outlet and contact your local dealer or the nearest address provided in the Inquiries.

• Move this unit away from the wall by at least 20 cm.

• Clean the air filter.

sp. 62

• When using this unit at high altitudes, that is 1500 m or more above sea level, set “High Altitude Mode” to “On”.

sp. 56

: lit : flashing : off

sp. 74

If the indicator status does not change when

is pressed and the

power turned on...

Red

Lamp error/Lamp failure/Lamp cuts out/Lamp cover open

Wait for approximately 1 minute and 30 seconds, and check for a blown lamp. sp. 65 Clean the air filter and the air intake vent.

Reinsert the lamp then turn on the main

The lamp is not broken

power switch on the main unit.

sp. 62

If the error continues

sp. 58

If the condition is not fixed once the lamp is re-inserted

The lamp is broken

When using this unit at high altitudes, that is 1500 m or more above sea level, set “High Altitude Mode” to “On”.

sp. 56

Contact your dealer for further advice. sp. 74

When the or indicators flash orange

Red

Orange

Green

Orange

High Temperature alarm

You can continue projecting in this state. Projection stops automatically if subsequent high temperatures are registered.

Check the 2 items listed.

• Move this unit away from the wall at least 20 cm.

• Clean the air filter.

sp. 62

Lamp replacement notification

It is time to replace the lamp. Replace the lamp with a new one as soon as possible. Do not continue to use the lamp in this state, otherwise it may explode. sp. 65

Warning

: lit : flashing : off

If there is no improvement when

you press and switch the

power on, discontinue use and disconnect the power cable from the electrical outlet. Contact your local dealer or the nearest address provided in the Inquiries. sp. 74

When the or indicators are off

Orange

Green

Orange

Green

Standing-by

During warming up (Approx. 20 sec)

Projection in Progress

Cooling down (Approx. 5 sec)

Break

Shows that the unit is ready to be used.

In warm-up mode, pressing has no effect.

Do not unplug the power cable during warm-up. This may reduce the lifespan of the lamp.

The operation of all remote control and main unit buttons is suspended during cooldown. Enters stand-by mode once cool-down has completed. Do not unplug the power cable during cool-down. This may reduce the lifespan of the lamp.

Press to return to normal playback.

Normal

: lit : flashing : off

Appendix

When the indicators provide no help

If this unit is not functioning normally, check the following notes before requesting repairs. However, if the unit fails to

improve, contact your dealer for advice.

At these times Check here

Power does not turn on

No images appear • Is the lens cover closed? sp. 18

Images are fuzzy or out of focus

Images appear dark • Is the color mode appropriate to the usage environment? sp. 25

The remote control does not work

There is no audio or it is too low.

The audio distorts Is the volume too loud? sp. 20

The audio/subtitle language cannot be changed

Subtitles do not appear • If there are no subtitles on the disc, they are not displayed. -

• Did you press ?

• Disconnect and reconnect the power cable. sp. 18

• Is the unit cooling down? sp. 59

• If the indicator goes on and off when you touch the power cable, turn

off the main power switch then disconnect and reconnect the power cable. If the unit fails to improve, it is possible that the power cable has been damaged. Stop using the unit, disconnect the power cable from the electrical outlet, and contact your dealer.

• Is the Child Lock set? sp. 56

• Is the DVD video region number correct? sp. 10

• Press to switch to DVD.

• Is the lamp spent? sp. 59

• Has the focus been adjusted? sp. 20

• Is the unit at the correct distance? sp. 68

• Could there be condensation? sp. 8

• Is the lamp due for replacement? sp. 63

• Is the screensaver running? sp. 52

• Is the Function/Numerics toggle switch in the [1 2 3] (numerical

input) position?

• Depending on the disc, certain operations are prohibited. -

• Are the batteries dead, or have the batteries been inserted incorrectly? sp. 16

• Has the volume been adjusted to the minimum setting? sp. 20

• Is mute mode active? Press .

•

If multiple languages are not recorded on the disc, they cannot be changed.

• Depending on the disc, there are some types that can only be changed from the DVD menu.

• Is the subtitle language set to “OFF”? sp. 36

Reference

page

sp. 18

sp. 74

sp. 45

sp. 26

When using external video or computer mode

At these times Check here

No images appear • Is the power for the connected equipment turned on?

Switch on the power to the connected equipment, or start playback depending on the playback method for the connected equipment.

“Signal not supported” is displayed

“No signal.” is displayed • Are the cables connected correctly? sp. 43 - 44

• When external video equipment is connected If projection is disabled even when the “Video Signal” is set to “Auto” in the visual setup menu, set the signal format that is appropriate to the device.

• When a computer is connected Are the resolution and refresh rate modes for the image signal compatible with the unit? Use the computer’s documentation and so on to check and change the resolution and the refresh rate for the image signal being output by the computer.

• Is the power for the connected equipment turned on? Turn on the

power for the connected equipment. Press the playback button according to the connected video equipment.

• Is a laptop computer or a computer with a built-in LCD screen

connected?

Change the image signal's output destination from the computer.

Reference

page

sp. 45

sp. 56

sp. 69

sp. 45

sp. 46

• Press to switch to DVD.

The signal is distorted • If an extension cable is used, electrical interference may affect the

signals. Connect amplification equipment and check.

• Is the computer’s image signal resolution mode compatible with the

unit?

Use the computer’s documentation and so on to check and change the resolution for the image signal being output by the computer.

• Press the button on the remote control if interference or

flickering appear in the computer image being projected. “Running Auto Setup···” is displayed and synchronization, tracking, and position are automatically adjusted.

Image is truncated (large) or small

Image colors are not right In the visual setup menu, set the “Video Signal” to the signal format

Moving images being played back by the computer become black

• The unit automatically recognizes the aspect ratio appropriate to

input signals and projects images. If the aspect ratio is not selected

correctly, press and select the aspect ratio appropriate to the

input signal.

• Press the button on the remote control if part of the computer

image being projected is missing. “Running Auto Setup···” is displayed and synchronization, tracking, and position are automatically adjusted.

appropriate to the device. Change the computer’s image signal to external output only.

s Check the “Documentation” supplied with the computer for more information, or inquire to the computer’s manufacturer.

sp. 45

sp. 69

sp. 40

sp. 56

Appendix

Maintenance

This section describes maintenance tasks such as cleaning the unit and replacing consumable parts.

Caution

Before starting the maintenance, unplug the power cable from the electrical outlet.

Cleaning

Cleaning the air filter and air intake vent

When dust builds up on the air filter or the air intake

vent, or the message “The unit is overheating. Make sure

nothing is blocking the air vent, and clean or replace the

air filter.” is displayed, remove any dust from the air

filter and the air intake vent using a vacuum cleaner.

If dust collects on the air filter or the air intake vent it can

cause the internal temperature of the unit to rise, and this can

lead to operation problems and a shortening of the service

life of optical parts. It is recommended that you clean these

parts at least once every three months. Clean them more

often than this if the unit is used in particularly dusty

environments.

Cleaning the main unit

Clean the surface by wiping it gently with a soft cloth.

If the unit is particularly dirty, moisten a cloth with

water containing a small amount of neutral detergent,

firmly wring the cloth dry, wipe the unit softly with the

cloth to remove stains, and then wipe it again with a

soft, dry cloth.

Cleaning the projection lens

Use a commercially available cloth for cleaning glasses

to gently wipe the lens.

Do not use volatile substances such as wax, alcohol, or thinner

to clean the unit's surface. These can cause the unit to warp

and make the coating finish peel off.

Do not rub the lens with harsh materials or subject the lens to

impact shock, as it is fragile.

Consumables replacement period

Air filter replacement period

When the air filter gets dirty or is broken

Lamp replacement period

• The message “Replace the lamp” appears on the screen when projection starts.

• The projected image gets darker or starts to deteriorate.

• In order to maintain the initial brightness and image quality, the lamp replacement message is displayed after about

1900 hours of use has passed. The time at which this message is displayed will vary depending on the color mode

settings and the conditions under which this unit has been used.

• If you continue to use the lamp after this period, the possibility of the lamp breaking becomes greater. When the lamp

replacement message appears, replace the lamp with a new one as soon as possible, even if it is still working.

• Depending on the characteristics of the lamp and on the way it has been used, the lamp may become darker or stop

working before the lamp warning message appears. You should always have a spare lamp ready in case it is needed.

Optional Accessories and Consumables

The following optional accessories and consumables are available for purchase if required. This list of optional

accessories is applicable as of September, 2007. Details of accessories are subject to change without notice and

availability may vary depending on the country or area of purchase.

Consumables

Replacement lamp ELPLP44

(Lamp x1)

Use as a replacement for used lamps.

Air filter ELPAF14

(Air filter x1)

Use as a replacement for used air filters.

Optional accessories

50” portable screen ELPSC06 60” portable screen ELPSC07 80” portable screen ELPSC08 100” screen ELPSC10

A compact screen which can be carried easily. (Aspect ratio 4:3)

HD-15 cable ELPKC02

(1.8 m - for mini D-Sub 15-pin/mini D-Sub 15-pin)

HD-15 cable ELPKC09

(3 m - for mini D-Sub 15-pin/mini D-Sub 15-pin)

HD-15 PC cable ELPKC10

(20 m - for mini D-Sub 15-pin/mini D-Sub 15-pin) Use to connect the unit to a computer.

Component video cable ELPKC19

(3 m - for mini D-Sub 15-pin/RCA male x 3) Use to connect a component video source.

Appendix

How to replace consumables

Replacing the air filter

Dispose of used air filters properly in accordance with your local

regulations.

Filter: Polypropylene

Frames: ABS resin

Turn the power switch off and when a short beep sounds,

unplug the power cable.

Remove the air filter cover.

Place your finger in the hollow and lift upwards.

Take out the old air filter.

Install the new air filter.

Install the filter cover.

Replacing the lamp

Caution

The lamp is hot immediately after use. Once the power has been switched off,

allow approximately one hour to pass before replacing the lamp to allow it to cool

thoroughly.

Turn the power switch off, and when a short beep sounds,

unplug the power cable.

Loosen the screws of the lamp cover attachment using the

screwdriver that supplied with the replacement lamp. Slide the lamp cover horizontally, and then lift it up to remove it.

Loosen the lamp attachment screws.

Take out the old lamp.

Install the new lamp.

Appendix

Tighten the lamp attachment screws firmly.

Install the lamp cover.

• Install the lamp and the lamp cover securely. For the safety of this unit, the lamp

will not turn on if the lamp or the lamp cover is not installed correctly.

• This product includes a lamp component that contains mercury (Hg). Please

consult your local regulations regarding disposal or recycling.

Do not dispose of it with normal waste.

Resetting the lamp operating time

After the lamp has been replaced, make sure you initialize the Lamp Hours

setting.

The unit has a built-in counter that keeps track of the lamp operating time and

the lamp replacement message is displayed based on this counter.

Connect the power cable, and press .

Press and when the menu appears, set the “Info” to

“Reset Lamp Hours”.

Select “Yes” and press to initialize the setting.

Appendix

Projection Distance and Screen Size

Refer to the following table and place the unit in a position which allows the best possible projection for the size of the

screen.

Units: cm (ft.)

Projection Distance

16:9 Screen Size

30” 66 x 37 (26 x 15) 87 - 118 (2.9 to 3.9)

40” 89 x 50 (35 x 20) 117 - 158 (3.8 to 5.2)

60” 130 x 75 (51 x 28) 177 - 239 (5.8 to 7.8)

80” 180 x 100 (71 x 39) 237 - 320 (7.8 to 10.5)

100” 220 x 120 (87 x 47) 297 - 401 (9.7 to 13.2)

120” 270 x 150 (106 x 59) 357 - 482 (11.7 to 15.8)

150” 330 x 190 (130 x 75) 447 - 604 (14.7 to 19.8)

4:3 Screen Size

30” 61 x 46 (24 x 18) 107 - 144 (3.5 to 4.7)

40” 81 x 61 (32 x 24) 143 - 194 (4.7 to 6.4)

60” 120 x 90 (47 x 35) 217 - 293 (7.1 to 9.6)

80” 160 x 120 (63 x 47) 290 - 392 (9.5 to 12.9)

100” 200 x 150 (79 x 59) 364 - 491 (11.9 to 16.1)

120” 240 x 180 (94 x 71) 437 - 590 (14.3 to 19.4)

150” 300 x 230 (118 x 91) 547 - 739 (18.0 to 24.2)

Minimum Maximum

(Zoom Adjustment Wide) - (Zoom Adjustment Tele)

Units: cm (ft.)

Projection Distance

Minimum Maximum

(Zoom Adjustment Wide) - (Zoom Adjustment Tele)

Compatible Resolution List

Composite video Units: Dots

Signal Resolution

TV (NTSC)

TV (PAL, SECAM)

* Letterbox signal

720 x 480

720 x 360

720 x 576

720 x 432

Normal Full Zoom

640 x 480

(4:3)

640 x 480

(4:3)

Aspect Mode

854 x 480

(16:9)

854 x 480

(16:9)

854 x 480

(16:9)

854 x 480

(16:9)

Component video Units: Dots

Signal Resolution

SDTV (480i, 60Hz)

SDTV (576i, 50Hz)

SDTV (480p)

SDTV (576p)

HDTV (720p) 16:9 1280 x 720

HDTV (1080i) 16:9 1920 x 1080

720 x 480

720 x 360

720 x 576

720 x 432

720 x 480

720 x 360

720 x 576

720 x 432

Normal Full Zoom

640 x 480

(4:3)

640 x 480

(4:3)

640 x 480

(4:3)

640 x 480

(4:3)

854 x 480

(16:9)

854 x 480

(16:9)

Aspect Mode

854 x 480

(16:9)

854 x 480

(16:9)

854 x 480

(16:9)

854 x 480

(16:9)

854 x 480

(16:9)

854 x 480

(16:9)

854 x 480

(16:9)

854 x 480

(16:9)

* Letterbox signal

Computer image Units: Dots

Signal Resolution

VGA60/72/75/85,

* 1

iMac

SVGA56/60/72/75/85,

* 1

iMac

XGA60/70/75/85,

* 1

iMac

MAC13” 640 x 480 640 x 480 854 x 480 854 x 480

MAC16” 832 x 624 640 x 480 854 x 480 854 x 480

MAC19” 1024 x 768 640 x 480 854 x 480 854 x 480

* 1 You cannot connect to models where the VGA output port is not installed.

* 2 Letterbox signals

Even when signals other than those mentioned above are input, it is likely that the image can be projected. However, not

all functions may be supported.

640 x 480

640 x 360

800 x 600

800 x 450

1024 x 768

1024 x 576

* 2

Normal Full Zoom

640 x 480 854 x 480 854 x 480

Aspect Mode

Appendix

Specifications

Product name EMP-DM1

Dimensions 320W x 135H x 230D mm (Including projections)

Panel size 0.55” wide

Display method Polysilicon TFT active matrix

Resolution 409, 920 pixels (854W x 480H dots) x 3

Focus adjustment Manual

Zoom adjustment Digital type (Approx. 1:1.35)

Lamp (light source)

Power supply 100 - 240VAC +/-10%, 50/60Hz, 2.2 to 1.0A

Power consumption

Operating altitude Altitude: 0 m to 2286 m

Operating temperature

Storage temperature

Weight Approximately 3.8 kg

Connectors

Speakers Maximum input 8W, Rated impedance 12 Ω ohms

Audio output

UHE lamp, 120W, Model No.: ELPLP44

100 to 120VAC area Operating: 200 W

Standby: 5 W

220 to 240VAC area Operating: 200W

Standby: 5 W

+5 to +35ºC (No condensation)

-10 to +60ºC (No condensation)

Input Audio port 1 RCA pin jack

Video port 1 RCA pin jack

Component port 1 RCA pin jack

Computer port 1 Mini D-Sub 15-pin

USB port 1 Type A

Output Digital Coaxial Audio-Out

port

Headphone jack 1 3.5 mm mini-jack

Analog audio output

Digital audio output

1 speaker system:Practical, maximum output 8W + 8W (10% THD)

1 headphone system: 25 mW/32 Ω ohms

Dynamic range: 70 dB or more

Digital coaxial output

1 RCA pin jack

* The USB ports may not accept all USB-compatible devices.

Pixelworks DNXTM IC is installed in this unit.

Tilted angle

The unit may fail or may cause an accident if it is tilted more than 15 degrees.

DECLARATION of CONFORMITY

According to 47CFR, Part 2 and 15

Class B Personal Computers and Peripherals; and/or

CPU Boards and Power Supplies used with Class B Personal Computers

We : Epson America, INC. Located at : 3840 Kilroy Airport Way

MS:3-13 Long Beach, CA 90806

Tel : 562-290-5254

Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR 2.909. Operation is subject to the following two conditions :(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Trade Name : Epson Type of Pro duct : Projector Model : EMP-DM1

FCC Compliance Statement

For United States Users

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio fr equency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING

The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface co nnector, do not leave cables connected to unused interfaces. Changes or modifications not expressly ap proved by the manufacturer could void the user’s authority to operate the equipment.

Appendix

Glossary

HDTV

An abbreviated form of “High-Definition Television system” to be applied to a high-definition TV set that can satisfy the following requirements:

-Vertical resolution 720p or 1080i or higher (where, “p” refers to progressive scan, and “i” refers to interlace scan)

-16:9 screen aspect ratio

JPEG

A file format used for saving image files. Most photographs taken with digital cameras are saved in the JPEG format.

MP3

The abbreviated form of “MPEG1 Audio Layer-3”, a standard for audio compression. It enables the size of the data to be greatly reduced, whilst maintaining a high sound quality.

NTSC

The abbreviated form of the “National Television Standards Committee”, and given to one of the analog color television wave transmission systems. This system is used in Japan, the USA and Latin America.

PAL

The abbreviated form of “Phase Alternation by Line”, and given to one of the analog color television wave transmission systems. This system is used in China, Western Europe, with the exception of France, and in other African and Asian countries.

SDTV

An abbreviated form of “Standard Definition Television”, and given to the standard TV broadcasting system that does not satisfy the HDTV requirements.

SECAM

The abbreviated form of “SEquential Couleur A Memoire”, and given to one of the analog color television wave transmission systems. This system is used in France, Eastern Europe, the former Soviet Union, the Middle East and some African nations.

Aspect

The ratio between an image’s length and its height. HDTV images have an aspect ratio of 16:9 and appear elongated. The aspect ratio for standard images is 4:3. This unit can automatically detect the aspect ratio of a disc when it is played back.

Cool-down

A process to enable the lamp to cool down from the high temperatures attained during projection. Cool-down is

automatically activated when you press to turn off the power. Do not unplug the power cable during cool-down. If

cool-down is not performed correctly, the lamp or internal structure of the main unit can overheat which may reduce the lifespan of the lamp or cause damage to this unit. Cool-down is complete once the main unit beeps twice.

Coaxial digital output

Converts the audio signal into a digital signal and enables it to be transmitted along coaxial cable.

Playback control (PBC)

A method for playing back Video CDs. You can select the screen or information you want to see from the menu screen displayed.

Disc related terms

Title/Chapter/Track

One movie on a DVD is divided into units called titles, which may contain any number of chapters.

DVD v ideo

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1

Chapter 2

WMA

The abbreviated form of “Windows Media Audio”, an audio compression technology developed by the Microsoft Corporation of America. You can encode WMA data using Windows Media Player Ver.7, 7.1, Windows Media Player for Windows XP, or the Windows Media Player 9 Series. When encoding WMA files, please use applications that have been certified by the Microsoft Corporation of America. If you use an application that has not been certified, it is possible that it may not operate correctly.

YCbCr

A transmission signal in the color bar signal waveform for the current TV set (NTSC system). Expressed by Y (brightness signal) CbCr (chromatin (color) signal).

YPbPr

A transmission signal in the color bar signal waveform for HiVision. Expressed by Y (brightness signal) PbPr (color difference signal).

Video and Audio CDs are divided into units called tracks.

Video CD/Audio CD

Track 1 Track 2 Track 3 Track 4

Index

Audio page ................................................................................ 52

Auto Setup ................................................................................ 61

Break ......................................................................................... 25

Brightness ................................................................................. 56

Chapter ...................................................................................... 72

Child lock .................................................................................. 56

Cleaning the air filter and air intake vent .................................. 62

Cleaning the main unit .............................................................. 62

Cleaning the projection lens ...................................................... 62

Color Mode ............................................................................... 25

Color Saturation ........................................................................ 56

Computer input port .................................................................. 44

Consumables ............................................................................. 63

Contrast ..................................................................................... 56

Digital Output ........................................................................... 52

Disc Lock .................................................................................. 52

....................................................................................... 29

DivX

DivX® VOD .............................................................................. 52

Dolby Digital ............................................................................ 52

Focus ring .................................................................................. 20

Option page ...............................................................................56

Optional accessories ..................................................................63

OSD Language ..........................................................................51

Others page ................................................................................52

Overheating ...............................................................................58

Password ....................................................................................52

PBC (playback control) .............................................................27

Playback information screen .....................................................37

Progressive ................................................................................56

Remote Control .........................................................................15

Replacing the air filter ...............................................................64

Replacing the lamp ....................................................................65

Resetting the lamp operating time .............................................66

Sharpness ...................................................................................56

Source ........................................................................................57

Standing-by ................................................................................59

Tint ............................................................................................56

Title ............................................................................................72

Track ..........................................................................................72

TV tuner .....................................................................................43

Headphones ............................................................................... 47

High Altitude Mode .................................................................. 56

Image page ................................................................................ 56

Indicators ................................................................................... 58

Info page ................................................................................... 57

Inserting the batteries ................................................................ 16

Lamp replacement period ......................................................... 63

Lamp-Hours .............................................................................. 57

Language page .......................................................................... 51

Menu ......................................................................................... 26

MP3 ........................................................................................... 29

MP3/JPEG NAV ....................................................................... 52

Mute .......................................................................................... 25

USB .....................................................................................11, 42

Video input port .........................................................................43

Video Signal ..............................................................................56

Virtual surround sound ..............................................................48

Volume ......................................................................................20

WMA .........................................................................................29

Zoom button ..............................................................................20

Night Mode ............................................................................... 52

Inquiries

< EUROPE, MIDDLE EAST & AFRICA >

This address list is current as of the 5th of April, 2007.

A more up-to-date contact address can be obtained from the corresponding website listed here. If you do not find what

you need on any of these pages, please visit the main Epson home page at www.epson.com.

ALBANIA :

INFOSOFT SYSTEM

Gjergji Center, Rr Murat Toptani Tirana 04000 - Albania Tel: 00 355 42 511 80/ 81/ 82/ 83 Fax: 00355 42 329 90 Web Address: http://content.epson.it/about/int_services.htm

AUSTRIA :

EPSON DEUTSCHLAND GmbH

Buropark Donau Inkustrasse 1-7 / Stg. 8 / 1. OG A-3400 Klosterneuburg Tel: +43 (0) 2243 - 40 181 - 0 Fax: +43 (0) 2243 - 40 181 - 30 Web Address: http://www.epson.at

BELGIUM :

EPSON DEUTSCHLAND GmbH Branch office Belgium

Belgicastraat 4 - Keiberg B-1930 Zaventem Tel: +32 2/ 7 12 30 10 Fax: +32 2/ 7 12 30 20 Hotline: 070 350120 Web Address: http://www.epson.be

BOSNIA AND HERZEGOVINA :

RECOS d.o.o.

Tvornicka 3 - 71000 Sarajevo Tel: 00 387 33 767 330 Fax: 00 387 33 454 428 Web Address: http://content.epson.it/about/int_services.htm

BULGARIA :

EPSON Service Center Bulgaria

c/o Reset Computers Ltd. 15-17 Tintiava Str. 1113 Sofia Tel. : 00 359 2 911 22 Fax: 00 359 2 868 33 28 Email: reset@reset.bg Web Address: http://www.reset.bg

CROATIA :

RECRO d.d.

Avenija V. Holjevca 40 10 000 Zagreb Tel: 00385 1 3650774 Fax: 00385 1 3650798 Web Address: http://content.epson.it/about/int_services.htm

CYPRUS :

TECH-U

75, Lemesou Avenue 2121 Cyprus Tel: 00357 22 69 4000 Fax: 00357 22490240 Web Address: http://content.epson.it/about/int_services.htm

CZECH REPUBLIC :

EPSON DEUTSCHLAND GmbH Branch Office Czech Republic

Slavickova 1a 63800 Brno E-mail: infoline@epson.cz Web Address: http://www.epson.cz Hotline: 800 142 052

DENMARK :

EPSON Denmark

Generatorvej 8 C 2730 Herlev Tel: 44508585 Fax: 44508586 Email: denmark@epson.co.uk Web Address: http://www.epson.dk Hotline: 70279273

ESTONIA :

EPSON Service Center Estonia

c/o Kulbert Ltd. Sirge 4, 10618 Tallinn Tel: 00372 671 8160 Fax: 00372 671 8161 Web Address: http://www.epson.ee

FINLAND :

Epson (UK) Ltd.

Rajatorpantie 41 C FI-01640 Vantaa Web Address: http://www.epson.fi Hotline: 0201 552091

FRANCE & DOM-TOM TERRITORY :

EPSON France S.A.

150 rue Victor Hugo BP 320 92305 LEVALLOIS PERRET CEDEX Web Address: http://www.epson.fr Hotline: 0821017017

GERMANY :

EPSON Deutschland GmbH

Otto-Hahn-Strasse 4 D-40670 Meerbusch Tel: +49-(0)2159-538 0 Fax: +49-(0)2159-538 3000 Web Address: http://www.epson.de Hotline: 01805 2341 10

GREECE :

EPSON Italia s.p.a.

274 Kifisias Avenue –15232 Halandri Greece Tel: +30 210 6244314 Fax: +30 210 68 28 615 Email: epson@information-center.gr Web Address: http://content.epson.it/about/int_services.htm

HUNGARY :

Epson Deutschland GmbH

Magyarorszagi Fioktelep 1117 Budapest Inforpark setany 1. Hotline: 06 800 14 783 E-mail: infoline@epson.hu Web Address: http://www.epson.hu

IRELAND :

Epson (UK) Ltd.

Campus 100, Maylands Avenue Hemel Hempstead Herts HP2 7TJ U.K.Techn. Web Address: http://www.epson.ie Hotline: 01 679 9015

ITALY :

EPSON Italia s.p.a.

Via M. Vi gan o de Vizz i, 93 /95 20092 Cinisello Balsamo (MI) Tel: +39 06. 660321 Fax: +39 06. 6123622 Web Address: http://www.epson.it Hotline: 02 26830058

LATVIA :

EPSON Service Center Latvia

c/o ServiceNet LV Jelgavas 36 1004 Riga Tel.: 00 371 746 0399 Fax: 00 371 746 0299 Web Address: http://www.epson.lv

LITHUANIA :

EPSON Service Center Lithuania

c/o ServiceNet Gaiziunu 3 50128 Kaunas Tel.: 00 370 37 400 160 Fax: 00 370 37 400 161 Web Address: http://www.epson.lt

LUXEMBURG :

EPSON DEUTSCHLAND GmbH Branch office Belgium

Belgicastraat 4-Keiberg B-1930 Zaventem Tel: +32 2/ 7 12 30 10 Fax: +32 2/ 7 12 30 20 Hotline: 0900 43010 Web Address: http://www.epson.be

MACEDONIAN :

DIGIT COMPUTER ENGINEERING

3 Makedonska brigada b.b upravna zgrada R. Konkar - 91000 Skopje Macedonia Tel: 00389 2 2463896 Fax: 00389 2 2465294 Web Address: http://content.epson.it/about/int_services.htm

NETHERLANDS :

EPSON DEUTSCHLAND GmbH Branch office Netherland

J. Geesinkweg 501 NL-1096 AX AmsterdamDuivendrecht Netherlands Tel: +31 20 592 65 55 Fax: +31 20 592 65 66 Hotline: 0900 5050808 Web Address: http://www.epson.nl

NORWAY :

EPSON NORWAY

Lilleakerveien 4 oppgang 1A N-0283 Oslo NORWAY Hotline: 815 35 180 Web Address: http://www.epson.no

POLAND :

EPSON DEUTSCHLAND GmbH Branch Office Poland

ul. Bokserska 66 02-690 Warszawa Poland Hotline: (0) 801-646453 Web Address: http://www.epson.pl

PORTUGAL :

EPSON Portugal

R. Gregorio Lopes, nº 1514 Restelo 1400-195 Lisboa Tel: 213035400 Fax: 213035490 Hotline: 707 222 000 Web Address: http://www.epson.pt

ROMANIA :

EPSON Service Center Romania

c/o MB Distribution 162, Barbu Vacarescu Blvd., Sector 2 71422 Bucharest Tel: 0040 21 231 7988 ext.103 Fax: 0040 21 230 0313 Web Address: http://www.epson.ro

SERBIA AND MONTENEGRO :

BS PROCESSOR d.o.o.

Hazdi Nikole Zivkovica 2 Beograd - 11000 - F.R. Jugoslavia Tel: 00 381 11 328 44 88 Fax: 00 381 11 328 18 70 Web Address: http://content.epson.it/about/int_services.htm

SLOVAKIA :

EPSON DEUTSCHLAND GmbH Branch Office Czech Republic

Slavickova 1a 638 00 Brno Hotline: 0850 111 429

(national costs) Web Address: http://www.epson.sk

SLOVENIA :

BIROTEHNA d.o.o.

Smartinska 106 1000 Ljubljana Slovenja Tel: 00 386 1 5853 410 Fax: 00386 1 5400130 Web Address: http://content.epson.it/about/int_services.htm

SPAIN :

EPSON Iberica, S.A.

Av. de Roma, 18-26 08290 Cerdanyola del valles Barcelona Tel: 93 582 15 00 Fax: 93 582 15 55 Hotline: 902 404142 Web Address: http://www.epson.es

SWEDEN :

Epson Sweden

Box 329 192 30 Sollentuna Sweden Tel: 0771-400134 Web Address: http://www.epson.se

SWIZERLAND :

EPSON DEUTSCHLAND GmbH Branch office Switzerland

Riedmuehlestrasse 8 CH-8305 Dietlikon Tel: +41 (0) 43 255 70 20 Fax: +41 (0) 43 255 70 21 Hotline: 0848448820 Web Address: http://www.epson.ch

TURKEY :

TECPRO

Sti. Telsizler mah. Zincirlidere cad. No: 10 Kat 1/2 Kagithane 34410 Istanbul Tel: 0090 212 2684000 Fax: 0090212 2684001 Web Address: http://www.epson.com.tr Info: bilgi@epsonerisim.com Web Address: http://www.epson.tr

UK :

Epson (UK) Ltd.

Campus 100, Maylands Avenue Hemel Hempstead Herts HP2 7TJ Tel: (01442) 261144 Fax: (01442) 227227 Hotline: 08704437766 Web Address: http://www.epson.co.uk

AFRICA :

Contact your dealer Web Address: http://www.epson.co.uk/welcome/ welcome_africa.htm or http://www.epson.fr/bienvenu.htm

SOUTH AFRICA :

Epson South Africa

Grnd. Flr. Durham Hse, Block 6 Fourways Office Park Cnr. Fourways Blvd. & Roos Str. Fourways, Gauteng. South Africa. Tel: +27 11 201 7741

/ 0860 337766 Fax: +27 11 465 1542 Email: support@epson.co.za Web Address: http://www.epson.co.za

MIDDLE EAST :

Epson (Middle East)

P.O. Box: 17383 Jebel Ali Free Zone Dubai UAE(United Arab Emirates) Tel: +971 4 88 72 1 72 Fax: +971 4 88 18 9 45 Email: supportme@epson.co.uk Web Address: http://www.epson.co.uk welcome/ welcome_africa.htm

< NORTH, CENTRAL AMERICA & CARIBBEANI ISLANDS >

CANADA :

Epson Canada, Ltd.

3771 Victoria Park Avenue Scarborough, Ontario CANA DA M1W 3Z5 Tel: 905-709-9475

or 905-709-3839 Web Address: http://www.epson.com

MEXICO :

Epson Mexico, S.A. de C.V.

Boulevard Manuel Avila Camacho 389 Edificio 1 Conjunto Legaria Col. Irrigacion, C.P. 11500 Mexico, DF Tel: (52 55) 1323-2052 Web Address: http://www.epson.com.mx

COSTA RICA :

Epson Costa Rica, S.A.

Dela Embajada Americana, 200 Sur y 300 Oeste Apartado Postal 1361-1200 Pavas San Jose, Costa Rica Tel: (506) 210-9555 Web Address: http://www.epson.co.cr

U. S. A. :

Epson America, Inc.

3840 Kilroy Airport Way Long Beach, CA 90806 Tel: 562-276-4394 Web Address: http://www.epson.com

< SOUTH AMERICA >

ARGENTINA :

Epson Argentina S.A.

Avenida Belgrano 964/970 Capital Federal

1092, Buenos Aires, Argentina Tel: (54 11)

5167-0300

Web Address:

http://www.epson.com.ar

BRAZIL :

Epson Do Brasil Ltda.

Av. Tucunare, 720

Tambore Barueri,

Sao Paulo, SP 0646-0020, Brazil

Tel: (55 11) 4196-6100

Web Address:

http://www.epson.com.br

< ASIA & OCEANIA >

AUSTRALIA :

EPSON AUSTRALIA PTYLIMITED

3, Talavera Road, N.Ryde NSW 2113,

AUSTR ALIA

Tel: 1300 361 054

Web Address:

http://www.epson.com.au

CHINA :

EPSON (BEIJING) TECHNOLOGY

SERVICE CO.,LTD.

8F,A. The Chengjian Plaza NO.18

Beitaipingzhuang Rd.,Haidian District,Beijing,

China

Zip code: 100088

Tel: 010-82255566-606

Fax: 010-82255123

EPSON (BEIJING) TECHNOLOGY

SERVICE CO.,LTD.SHANGHAI

BRANCH PANYU ROAD SERVICE

CENTER

NO. 127 Panyu Road, Changning District,

Shanghai China

ZIP code: 200052

Tel: 021-62815522

Fax: 021-52580458

EPSON (BEIJING) TECHNOLOGY

SERVICE CO.,LTD.GUANGZHOU

BRANCH

ROOM 1405,1407 Baoli Plaza,NO.2 , 6th

Zhongshan

Road,Yuexiu District, Guangzhou

Zip code: 510180

Tel: 020-83266808

Fax: 020- 83266055

EPSON (BEIJING) TECHNOLOGY

SERVICE CO.,LTD.CHENDU BRANCH

ROOM2803B, A. Times Plaza, NO.2, Zongfu

Road, Chengdu

Zip code: 610016

Tel: 028-86727703/04/05

Fax: 028-86727702

CHILE :

Epson Chile S.A.

La Concepcion 322 Piso 3 Providencia, Santiago,Chile Tel: (562) 484-3400 Web Address: http://www.epson.com.cl

COLOMBIA :

Epson Colombia Ltda.

Diagonal 109, 15-49 Bogota, Colombia Tel: (57 1) 523-5000 Web Address: http://www.epson.com.co

HONGKONG :

EPSON Technical Support Centre (Information Centre)

Units 516-517, Trade Square, 681 Cheung Sha Wan Road, Cheung Sha Wan, Kowloon, HONG KONG Tech. Hot Line: (852) 2827 8911 Fax: (852) 2827 4383 Web Address: http://www.epson.com.hk

JAPAN :

SEIKO EPSON CORPORATION SHIMAUCHI PLANT

VI Customer Support Group: 4897 Shimauchi, Matsumoto-shi, Nagano-ken, 390-8640 JAPAN Tel: 0263-48-5438 Fax: 0263-48-5680 Web Address: http://www.epson.jp

KOREA :

EPSON KOREA CO., LTD.

11F Milim Tower, 825-22 Yeoksam-dong, Gangnam-gu, Seoul,135-934 Korea Tel : 82-2-558-4270 Fax: 82-2-558-4272 Web Address: http://www.epson.co.kr

MALAYSIA :

EPSON TRADING (MALAYSIA) SDN. BHD.

3rd Floor, East Tower, Wisma Consplant 1 No.2, Jalan SS 16/4, 47500 Subang Jaya, Malaysia. Tel: 03 56 288 288 Fax: 03 56 288 388

or 56 288 399

SINGAPORE :

EPSON SINGAPORE PTE. LTD.

1 HarbourFront Place #03-02 HarbourFront Tower One Singapore 098633. Tel: 6586 3111 Fax: 6271 5088

PERU :

Epson Peru S.A.

Av. Del Parque Sur #400 San Isidro, Lima, 27, Peru Tel: (51 1) 224-2336 Web Address: http://www.epson.com.pe

VENEZUELA :

Epson Venezuela S.A.

Calle 4 con Calle 11-1 Edf. Epson -- La Urbina Sur Caracas, Venezuela Tel: (58 212) 240-1111 Web Address: http://www.epson.com.ve

TAIWAN :

EPSON Taiwan Technology & Trading Ltd.

14F,No. 7, Song Ren Road, Tai p e i , Taiwa n , ROC. Tel: (02) 8786-6688 Fax: (02) 8786-6633 Web Address: http://www.epson.com.tw

THAILAND:

EPSON (Thailand) Co.,Ltd.

24th Floor, Empire Tower, 195 South Sathorn Road, Yannawa, Sathorn, Bangkok 10120, Thailand. Tel: (02) 6700680 Ext. 310 Fax: (02) 6070669 Web Address: http://www.epson.co.th

form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written

permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information

contained herein. Neither is any liability assumed for damages resulting from the use of the information contained

herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for

damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this

product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly

comply with Seiko Epson Corporation’s operating and maintenance instructions.

Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any

consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko

Epson Corporation.

The contents of this guide may be changed or updated without further notice.

Illustrations and screens used in this publication may differ from actual illustrations and screens.

Trademarks

Windows Media and Windows logos are trademarks or registered trademarks of Microsoft Corporation in the United

States and other countries.

XGA is a trademark or a registered trademark of International Business Machine Corporation.

iMac is a registered trademark of Apple Inc.

Manufactured under license from Dolby Laboratories. “Dolby”, and the double-D symbol are trademarks of Dolby

Laboratories.

“DTS” and “DTS Digital Surround” are registered trademarks of DTS, Inc.

DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.

Pixelworks and DNX are trademarks of Pixelworks Inc.

DVD Video logo is a trademark.

We respect other trademarks or registered trademarks of respective companies even if they are not specified.

Epson DM1 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Safety Instructions

Use and Storage

Discs and USB Storage

Parts Name and Functions

Preparing the Remote Control

Quick Start

Installation

Projection distance and screen size

Connecting the power cable

Disc Playback

Playing a disc and projecting

Adjusting the projection position and volume

Stopping playback

Turning off the power

Basic Playback Operations

Pause

Reverse search/forward search

Skip

Frame advance

Slow motion playback

Temporarily using the projector’s light as illumination (Break)

Color Mode

Mute

Advanced Operations

Becoming a playback expert

Playback from a DVD menu

Playback a Video CD from the menu

JPEG, MP3/WMA and DivX® playback

Playback by selecting the chapter or track number

Repeat play and random play

Program play

Zoom In

Changing the audio language

Changing the subtitles display

Changing the angle

Carrying out operations from the playback information screen

Setting the sleep timer

Changing the aspect ratio

Playback by attaching a peripheral device

Connecting a USB storage device

Connecting to another video device, a TV set, or a Computer

Projecting images from external video equipment or a computer

Audio Settings

Listening with headphones

Connecting to audio equipment with a digital coaxial audio input port

Selecting the Surround Sound mode

Selecting the digital sound effects

Settings and Adjustments

Setup Menu Operation and Functions

Using the setup menu

Setup menu list

Language code list

“Digital Output” settings and output signals

Operations and functions on the Visual Setup menu

Operations on the Visual Setup menu

Visual Setup menu

Appendix

Troubleshooting

Reading the indicators

When the indicators provide no help

Maintenance

Cleaning

Consumables replacement period

Optional Accessories and Consumables

How to replace consumables

Projection Distance and Screen Size

Compatible Resolution List

Specifications

Glossary

Index

Inquiries