Eppendorf Wall mount for Multipette Xstream User Manual

Instructions for use Wall mount seeon p.Fig.Tab.p.

English (EN)Instructions for use

Instructions for use

Wall mount
English (EN)

1 Wall mount

Abb. 1-1: Wall mount for Multipette® (X)stream/Repeater® (X)stream

Fig. 1-1: Wall mount for Multipette® (X)stream/Repeater® (X)stream

Abb. 1-2: Wall mount for Eppendorf Xplorer®/Xplorer® plus

Fig. 1-2: Wall mount for Eppendorf Xplorer®/Xplorer® plus

2 Mounting the wall mount

1. Clean glass or ceramic surfaces (e.g., with ethanol) and allow them to dry.

2. Remove protective film and firmly press the wall mount against the cleaned
surfaces.

Objects may only be placed in the wall mount after 24 hours.

3 Cleaning the wall mount

 Use a damp cloth and mild cleaning agent to wipe off contamination.

4 Removing the wall mount

 Rotate the wall mount and remove adhesive tape.

Instructions for use

Mutipette

®

Xstream

Wall mount
English (EN)

5 Loading the rechargeable battery

Abb. 5-1: Multipette® (X)stream/Repeater® (X)stream

Abb. 5-2: Eppendorf Xplorer®/Xplorer® plus

Fig. 5-1: Multipette® (X)stream/

®

Repeater

(X)stream

Fig. 5-2: Eppendorf Xplorer®/

®

Xplorer

plus

 Mount the device in the wall mount and charge it using the mains/power

supply device.

6 Materials

Wall mount Material

Available surfaces

Acrylonitrile styrene acrylate with polycarbonate (ASA/PC)

7 Ordering information

Order no.
(International)

4861 615.001
4986 604.001

4861 616.008 4861616008 Sticky tape

Order no. 
(North America)

4861615001
4986604001

Description

Wall mount

for Eppendorf Xplorer/Xplorer plus
for Multipette (X)stream/Repeater (X)stream

1 piece

Your local distributor: www.eppendorf.com/contact

Eppendorf AG · 22331 Hamburg · Germany

[e-mail] · www.eppendorf.com

and the Eppendorf logo are registered trademarks of Eppendorf AG.

®

4861 900.059-02/042013

Eppendorf