Energy V-6.3 DATASHEET

V-6.3

SPECIFICATIONS V-6.3

Floorstanding speaker with attractive high-end ﬁnish

High gloss piano black or rosenut cabinet

Convergent Source Module

Tweeter and woofer in proximity act as single source to increase dispersion

1-inch aluminum dome tweeter

Produces clear, accurate highs for a detailed listening experience

Dual 6.5-inch woofers with Ribbed Elliptical Surround

Deliver tight and powerful distortion-free low-frequency response

All Energy brand components were developed with these sound principles in mind:

•

Flat On-Axis Frequency Response with Wide Bandwidth

Speakers should reproduce the entire audio range in a uniform manner. By ensuring that no one frequency dominates any other, Energy ensures that every note is the way it was intended to be – and the sound is as natural as possible.

•

Wide and Constant Dispersion

Sound at all frequencies radiating from the speakers should be in an even pattern, in all directions throughout the room.

•

Low Distortion and Resonance

No speaker system is totally distortion-or resonance-free, but Energy has achieved a signiﬁcantly lower distortion level – a clearly audible

improvement.

Speaker System

Frequency Response 31Hz - 25kHz +/- 3dB

Recommended Amplier Power

Sensitivity 93.5dB

Impedance 8 ohms nominal; 4 ohms minimum

Twe ete r

Midrange

Woofers

Crossover Points 800Hz, 2.5kHz

Inputs Dual 5-way nickel-plated binding posts

Height 42.52 " (108c m)

Width 7.76" (19.7cm)

Depth

Weight

Finish

Included Accessories

3 way oorstanding loudspeaker with shielded drivers, rear vente d bass reex design

up to 250 watts RMS

One 1" tweeter with aluminum dome and neodymium motor with heat sink

One 5.25" midrang e with kevlar cone and Ribbed Elliptical Surround

Two 6.5" woofers with kevlar cones and Ribbed Elliptical Surrounds

14.06" (35.7cm)

57 lbs / 25.9 kg

Piano Black & Piano Rosenut

Spike kit, rubber bumpers, high gloss black base/ plinth, port plugs

www.energy-speakers.com