Rev. 05.27.08
LPS60 Series
1 of 3
Embedded Power for
Business-Critical Continuity
LPS60 Series
60 Watts
Special Features
• Universal input
• 3" x 5" footprint
•Remote sense
• Built in EMI filter
• Low output ripple
• Adjustable output voltage
• Overload protection
• 110 KHz switching frequency
• LPX60 enclosure kit available
Total Power: 60 - 80 Watts
Input Voltage: 85 - 264 Vac
120 - 300Vdc
# of Outputs: Single
Electrical Specifications
Safety
Input
Input ra nge: 85 - 264 Vac (wide range)
120 - 300 Vdc
Frequency: 47-440 Hz
Inrush current: <18A peak @ 115 Vac, <36 A peak @230 Vac,
cold start @ 25 °C
Input current: 1.5 A max. (RMS) @ 115 Vac
Efficiency: 70% typical at full load
EMI filter: FCC Class B conducted; CISPR22 Class B conducted; EN55022
Class B conducted; VDE0878PT3 Class B conducted
Safety ground leakage
current:
<0.5 mA @ 50/60 Hz; 264 Vac input
Output
Maximum power: 60 W for convection; 80 W with 30 CFM forced air
Adjustment range -5, +10% minimum
Hold-up time 20 ms @ 60 W load, 115 Vac nominal line
Overload protection Short circuit protection on all outputs.
Case overload protected @ 110-145% above peak rating
Overvoltage protection 5 V output; 5.7 - 6.7 Vdc. Other outputs 10% to 25%
above nominal output
Remote sense Compensates for 0.5 V lead drop min. Will operate without
remote sense connected. Reverse connection protected.
VDE 0805/EN60950 (IEC950)
11774-3336-1255
(LC #86665)
UL UL1950
E132002
CSA CSA 22.2-234 Level 3
LR53982C
NEMKO EN 60950/EMKO-TUE
P95100123
(74-sec) 203
CB Certificate and report
1521, 1522, 1523, 1524
CE Mark (LVD)