Emerson LC320EM2F, 32MF301B/F7, LC320EM2, LC320SS2, CLC320EM2F Service Manual

32” LCD TV

chassis FL11.4

SERVICE MANUAL

Contents

TYPE A

32MF301B/F7 MAGNAVOX (Serial No.: DS1, DS2, DS3, DS4, DS6) LC320EM2 EMERSON (Serial No.: DS1, DS2, DS3, DS4, DS5, DS6, DS7) LC320SS2 SYLVANIA (Serial No.: DS1, DS2, DS3) LC320EM2F EMERSON (Serial No.: DS1, DS2, DS3, DS4) CLC320EM2F EMERSON (Serial No.: DS1)

TYPE B

32MF301B/F7 MAGNAVOX (Serial No.: TH1, ME1, ME3) LC320SS2 SYLVANIA (Serial No.: TH1, ME1) LC320EM2 EMERSON (Serial No.: TH1, ME1, ME3)

This service manual contains information of different types of models. Make sure to refer to the section describing your model.

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

111208

IMPORTANT SAFETY NOTICE

Proper service and repair is important to the safe, reliable operation of all Funai Equipment. The service procedures recommended by Funai and described in this service manual are effective methods of performing service operations. Some of these service special tools should be used when and as recommended.

It is important to note that this service manual contains various CAUTIONS and NOTICES which should be carefully read in order to minimize the risk of personal injury to service personnel. The possibility exists that improper service methods may damage the equipment. It also is important to understand that these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE. Funai could not possibly know, evaluate and advice the service trade of all conceivable ways in which service might be done or of the possible hazardous consequences of each way. Consequently, Funai has not undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not recommended by Funai must first use all precautions thoroughly so that neither his safety nor the safe operation of the equipment will be jeopardized by the service method selected.

The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a tiny spec of color. This is not to be considered a defect in the LCD screen.

TABLE OF CONTENTS

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Important Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Standard Notes for Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Cabinet Disassembly Instructions [TYPE A] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

[TYPE B] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Electrical Adjustment Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

How to Initialize the LCD TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Firmware Renewal Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

Block Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

Schematic Diagrams / CBA and Test Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1

Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1

Exploded Views [TYPE A]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1

[TYPE B]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-3

Parts List [TYPE A] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1

[TYPE B] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-40

Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-1

SPECIFICATIONS

< TUNER / NTSC >

ANT. Input ---------------------- 75 Ω Unbal., F type

Description Condition Unit Nominal Limit

1. AFT Pull-In Range --- MHz ±2.3 ±2.1 18

18 18

2. Synchronizing Sens.

TV.ch.4 CA.ch.31 CA.ch.87

dBµ dBµ dBµ

< TUNER / ATSC >

Description Condition Unit Nominal Limit

1. Received Freq. Range (-28dBm) --- kHz --- ±100

2. ATSC Dynamic Range (min / max)

ch.4 ch.10 ch.41

dBm dBm dBm

---

< LCD PANEL >

Description Condition Unit Nominal Limit

1. Native Pixel Resolution

2. Brightness (w / filter) ---

3. Viewing Angle

Horizontal

Vert ical

Horizontal

Vert ical

pixels pixels

cd/m

° °

1366

768

2

300 ---

-88 to 88

20 20 23

-76/0

-76/+4

---

< VIDEO >

Description Condition Unit Nominal Limit

1. Over Scan

2. Color Temperature

3. Resolution (composite video)

Horizontal

Vert ical

--x y

<Measurement condition> Input signal: Internal pattern (40/70% raster) Measurement point: Screen center Measuring instrument: Aging time: 60min. (Retail MODE / 100IRE Raster HDMI

MODE setting of TV: Shipment setting / Retail MODE Ambient temperature: 25°C ±5°C

Horizontal

Vert ical

% %

°K 12000

Made of KONICA MINOLTA Luminance meter CA-310

1080i@60)

line line

5 5

0.272

0.278

400 350

5±5 5±5

--±2% ±2%

---

< AUDIO >

All items are measured across 8 Ω load at speaker output terminal with L.P.F.

Description Condition Unit Nominal Limit

1.

Audio MAX Output (ATSC 0dBfs)

2. Audio Distortion (NTSC) 500mW: Lch/Rch % 0.5/0.5 2.0/2.0

3. Audio Freq. Response (NTSC)

Lch/Rch W 5.0/5.0 4.0/4.0

-

6dB: Lch

-

6dB: Rch

Hz Hz

70 to 10 k 70 to 10 k

100 to 8 k 100 to 8 k

1-1 FL11.4SP

IMPORTANT SAFETY PRECAUTIONS

Prior to shipment from the factory, our products are strictly inspected for recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced.

Safety Precautions for LCD TV Circuit

1. Before returning an instrument to the

customer, always make a safety check of the

entire instrument, including, but not limited to, the following items:

a. Be sure that no built-in protective devices are

defective and have been defeated during servicing. (1) Protective shields are provided on this chassis to protect both the technician and the customer. Correctly replace all missing protective shields, including any removed for servicing convenience. (2) When reinstalling the chassis and/or other assembly in the cabinet, be sure to put back in place all protective devices, including but not limited to, nonmetallic control knobs, insulating fishpapers, adjustment and compartment covers/shields, and isolation resistor/capacitor networks. Do not operate this instrument or

permit it to be operated without all protective devices correctly installed and functioning. Servicers who defeat safety features or fail to perform safety checks may be liable for any resulting damage.

b. Be sure that there are no cabinet openings

through which an adult or child might be able to insert their fingers and contact a hazardous voltage. Such openings include, but are not limited to, (1) spacing between the Liquid Crystal Panel and the cabinet mask, (2) excessively wide cabinet ventilation slots, and (3) an improperly fitted and/or incorrectly secured cabinet back cover.

c. Antenna Cold Check - With the instrument AC

plug removed from any AC source, connect an electrical jumper across the two AC plug prongs. Place the instrument AC switch in the on position. Connect one lead of an ohmmeter to the AC plug prongs tied together and touch the other ohmmeter lead in turn to each tuner antenna input exposed terminal screw and, if applicable, to the coaxial connector. If the measured resistance is less than 1.0 megohm or greater than 5.2 megohm, an abnormality exists that must be corrected before the instrument is returned to the customer. Repeat this test with the instrument AC switch in the off position.

d. Leakage Current Hot Check - With the

instrument completely reassembled, plug the AC line cord directly into a 120 V AC outlet. (Do not use an isolation transformer during this test.) Use a leakage current tester or a metering system that complies with American National Standards Institute (ANSI) C101.1 Leakage Current for Appliances and Underwriters Laboratories (UL) 1410, (50.7). With the instrument AC switch first in the on position and then in the off position, measure from a known earth ground (metal water pipe, conduit, etc.) to all exposed metal parts of the instrument (antennas, handle brackets, metal cabinet, screw heads, metallic overlays, control shafts, etc.), especially any exposed metal parts that offer an electrical return path to the chassis. Any current measured must not exceed 0.5 milli-ampere. Reverse the instrument power cord plug in the outlet and repeat the test.

READING SHOULD NOT BE ABOVE 0.5 mA

LEAKAGE

DEVICE

BEING

TESTED

TEST ALL EXPOSED METAL SURFACES

ALSO TEST WITH PLUG REVERSED USING AC ADAPTER PLUG AS REQUIRED

ANY MEASUREMENTS NOT WITHIN THE LIMITS SPECIFIED HEREIN INDICATE A POTENTIAL SHOCK HAZARD THAT MUST BE ELIMINATED BEFORE RETURNING THE INSTRUMENT TO THE CUSTOMER OR BEFORE CONNECTING THE ANTENNA OR ACCESSORIES.

2. Read and comply with all caution and safety-

related notes on or inside the receiver cabinet, on the receiver chassis, or on the Liquid Crystal Panel.

CURRENT

TESTER

+

EARTH GROUND

_

2-1 LTVN_ISP

3. Design Alteration Warning - Do not alter or add to the mechanical or electrical design of this TV receiver. Design alterations and additions, including, but not limited to circuit modifications and the addition of items such as auxiliary audio and/or video output connections, might alter the safety characteristics of this receiver and create a hazard to the user. Any design alterations or additions will void the manufacturer's warranty and may make you, the servicer, responsible for personal injury or property damage resulting therefrom.

4. Hot Chassis Warning a. Some TV receiver chassis are electrically

connected directly to one conductor of the AC power cord and maybe safety-serviced without an isolation transformer only if the AC power plug is inserted so that the chassis is connected to the ground side of the AC power source. To confirm that the AC power plug is inserted correctly, with an AC voltmeter, measure between the chassis and a known earth ground. If a voltage reading in excess of

1.0 V is obtained, remove and reinsert the AC power plug in the opposite polarity and again measure the voltage potential between the chassis and a known earth ground.

b. Some TV receiver chassis normally have 85V

AC(RMS) between chassis and earth ground regardless of the AC plug polarity. This chassis can be safety-serviced only with an isolation transformer inserted in the power line between the receiver and the AC power source, for both personnel and test equipment protection.

c. Some TV receiver chassis have a secondary

ground system in addition to the main chassis ground. This secondary ground system is not isolated from the AC power line. The two ground systems are electrically separated by insulation material that must not be defeated or altered.

5. Observe original lead dress. Take extra care to assure correct lead dress in the following areas: a. near sharp edges, b. near thermally hot parts-be sure that leads and components do not touch thermally hot parts, c. the AC supply, d. high voltage, and, e. antenna wiring. Always inspect in all areas for pinched, out of place, or frayed wiring. Check AC power cord for damage.

6. Components, parts, and/or wiring that appear to have overheated or are otherwise damaged should be replaced with components, parts, or wiring that meet original specifications. Additionally, determine the cause of overheating and/or damage and, if necessary, take corrective action to remove any potential safety hazard.

7. Product Safety Notice - Some electrical and mechanical parts have special safety-related characteristics which are often not evident from visual inspection, nor can the protection they give necessarily be obtained by replacing them with components rated for higher voltage, wattage, etc. Parts that have special safety characteristics are identified by a # on schematics and in parts lists. Use of a substitute replacement that does not have the same safety characteristics as the recommended replacement part might create shock, fire, and/or other hazards. The product's safety is under review continuously and new instructions are issued whenever appropriate. Prior to shipment from the factory, our products are strictly inspected to confirm they comply with the recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced.

2-2 LTVN_ISP

Precautions during Servicing

A. Parts identified by the # symbol are critical for

safety. Replace only with part number specified.

B. In addition to safety, other parts and assemblies

are specified for conformance with regulations applying to spurious radiation. These must also be replaced only with specified replacements. Examples: RF converters, RF cables, noise blocking capacitors, and noise blocking filters, etc.

C. Use specified internal wiring. Note especially:

1) Wires covered with PVC tubing

2) Double insulated wires

3) High voltage leads

D. Use specified insulating materials for hazardous

live parts. Note especially:

1) Insulation Tape

2) PVC tubing

3) Spacers

4) Insulators for transistors.

E. When replacing AC primary side components

(transformers, power cord, etc.), wrap ends of wires securely about the terminals before soldering.

F. Observe that the wires do not contact heat

producing parts (heat sinks, oxide metal film resistors, fusible resistors, etc.)

G. Check that replaced wires do not contact sharp

edged or pointed parts.

H. When a power cord has been replaced, check that

11~13 lb (5~6 kg) of force in any direction will not loosen it.

I. Also check areas surrounding repaired locations. J. Use care that foreign objects (screws, solder

droplets, etc.) do not remain inside the set.

K. When connecting or disconnecting the internal

connectors, first, disconnect the AC plug from the AC supply outlet.

L. When installing parts or assembling the cabinet

parts, be sure to use the proper screws and tighten certainly.

2-3 LTVN_ISP

Safety Check after Servicing

Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts and wires have been returned to original positions. Afterwards, perform the following tests and confirm the specified values in order to verify compliance with safety standards.

1. Clearance Distance

When replacing primary circuit components, confirm specified clearance distance (d) and (d') between soldered terminals, and between terminals and surrounding metallic parts. (See Fig. 1)

Table 1: Ratings for selected area

Chassis or Secondary Conductor

Primary Circuit

AC Line Voltage Region

110 to 130 V

Note: This table is unofficial and for reference only. Be

sure to confirm the precise values.

U.S.A. or

Canada

Clearance

Distance (d), (d’)

≥ 3.2 mm

(0.126 inches)

2. Leakage Current Test

Confirm the specified (or lower) leakage current between B (earth ground, power cord plug prongs) and externally exposed accessible parts (RF terminals, antenna terminals, video and audio input and output terminals, microphone jacks, earphone jacks, etc.) is lower than or equal to the specified value in the table below.

Measuring Method: (Power ON)

Insert load Z between B (earth ground, power cord plug prongs) and exposed accessible parts. Use an AC voltmeter to measure across both terminals of load Z. See Fig. 2 and following table.

d' d

Fig. 1

Exposed Accessible Part

Z

AC Voltmeter (High Impedance)

Earth Ground

B

Power Cord Plug Prongs

Table 2: Leakage current ratings for selected areas

AC Line Voltage Region Load Z Leakage Current (i) Earth Ground (B) to:

110 to 130 V

Note: This table is unofficial and for reference only. Be sure to confirm the precise values.

U.S.A. or

Canada

0.15 µF CAP. & 1.5 kΩ

RES. Connected in parallel

2-4 LTVN_ISP

i ≤ 0.5 mA rms

Fig. 2

Exposed accessible

parts

STANDARD NOTES FOR SERVICING

Circuit Board Indications

1. The output pin of the 3 pin Regulator ICs is indicated as shown.

Top Vi ew

Out

2. For other ICs, pin 1 and every fifth pin are indicated as shown.

Pin 1

3. The 1st pin of every male connector is indicated as shown.

Pin 1

Input

In

Bottom View

5

10

Pb (Lead) Free Solder

Pb free mark will be found on PCBs which use Pb free solder. (Refer to figure.) For PCBs with Pb free mark, be sure to use Pb free solder. For PCBs without Pb free mark, use standard solder.

Pb free mark

How to Remove / Install Flat Pack-IC

1. Removal

With Hot-Air Flat Pack-IC Desoldering Machine:

1. Prepare the hot-air flat pack-IC desoldering machine, then apply hot air to the Flat Pack-IC (about 5 to 6 seconds). (Fig. S-1-1)

Fig. S-1-1

2. Remove the flat pack-IC with tweezers while applying the hot air.

3. Bottom of the flat pack-IC is fixed with glue to the CBA; when removing entire flat pack-IC, first apply soldering iron to center of the flat pack-IC and heat up. Then remove (glue will be melted). (Fig. S-1-6)

4. Release the flat pack-IC from the CBA using tweezers. (Fig. S-1-6)

CAUTION:

1. The Flat Pack-IC shape may differ by models. Use an appropriate hot-air flat pack-IC desoldering machine, whose shape matches that of the Flat Pack-IC.

2. Do not supply hot air to the chip parts around the flat pack-IC for over 6 seconds because damage to the chip parts may occur. Put masking tape around the flat pack-IC to protect other parts from damage. (Fig. S-1-2)

3-1 TVN_SN

3. The flat pack-IC on the CBA is affixed with glue, so be careful not to break or damage the foil of each pin or the solder lands under the IC when removing it.

With Soldering Iron:

1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder flux which is applied to all pins of the flat pack-IC, you can remove it easily. (Fig. S-1-3)

CBA

Masking Ta pe

Tweezers

Hot-air Flat Pack-IC Desoldering Machine

Flat Pack-IC

Fig. S-1-2

Flat Pack-IC

Desoldering Braid

Soldering Iron

Fig. S-1-3

2. Lift each lead of the flat pack-IC upward one by one, using a sharp pin or wire to which solder will not adhere (iron wire). When heating the pins, use a fine tip soldering iron or a hot air desoldering machine. (Fig. S-1-4)

Sharp Pin

Fine Tip Soldering Iron

Fig. S-1-4

3. Bottom of the flat pack-IC is fixed with glue to the CBA; when removing entire flat pack-IC, first apply soldering iron to center of the flat pack-IC and heat up. Then remove (glue will be melted). (Fig. S-1-6)

4. Release the flat pack-IC from the CBA using tweezers. (Fig. S-1-6)

3-2 TVN_SN

With Iron Wire:

1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder flux which is applied to all pins of the flat pack-IC, you can remove it easily. (Fig. S-1-3)

2. Affix the wire to a workbench or solid mounting point, as shown in Fig. S-1-5.

3. While heating the pins using a fine tip soldering iron or hot air blower, pull up the wire as the solder melts so as to lift the IC leads from the CBA contact pads as shown in Fig. S-1-5.

4. Bottom of the flat pack-IC is fixed with glue to the CBA; when removing entire flat pack-IC, first apply soldering iron to center of the flat pack-IC and heat up. Then remove (glue will be melted). (Fig. S-1-6)

5. Release the flat pack-IC from the CBA using tweezers. (Fig. S-1-6)

Note: When using a soldering iron, care must be

taken to ensure that the flat pack-IC is not being held by glue. When the flat pack-IC is removed from the CBA, handle it gently because it may be damaged if force is applied.

Hot Air Blower

2. Installation

1. Using desoldering braid, remove the solder from the foil of each pin of the flat pack-IC on the CBA so you can install a replacement flat pack-IC more easily.

2. The “ I ” mark on the flat pack-IC indicates pin 1. (See Fig. S-1-7.) Be sure this mark matches the pin 1 on the PCB when positioning for installation. Then presolder the four corners of the flat pack-IC. (See Fig. S-1-8.)

3. Solder all pins of the flat pack-IC. Be sure that none of the pins have solder bridges.

Example :

Pin 1 of the Flat Pack-IC is indicated by a " " mark.

Fig. S-1-7

To Solid Mounting Point

CBA

Tweezers

Iron Wire

Soldering Iron

Fig. S-1-5

Fine Tip Soldering Iron

Flat Pack-IC

or

Presolder

Flat Pack-IC

CBA

Fig. S-1-8

Fig. S-1-6

3-3 TVN_SN

Instructions for Handling Semiconductors

Electrostatic breakdown of the semi-conductors may occur due to a potential difference caused by electrostatic charge during unpacking or repair work.

1. Ground for Human Body

Be sure to wear a grounding band (1 MΩ) that is properly grounded to remove any static electricity that may be charged on the body.

2. Ground for Workbench

Be sure to place a conductive sheet or copper plate with proper grounding (1 MΩ) on the workbench or other surface, where the semi-conductors are to be placed. Because the static electricity charge on clothing will not escape through the body grounding band, be careful to avoid contacting semi-conductors with your clothing.

1MΩ

CBA

Grounding Band

1MΩ

CBA

Conductive Sheet or Copper Plate

3-4 TVN_SN

[TYPE A]

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart

This flowchart indicates the disassembly steps for the cabinet parts and the CBA in order to gain access to items to be serviced. When reassembling, follow the steps in reverse order. Bend, route and dress the cables as they were.

[1] Stand

Assembly

[3] Digital Main CBA Unit

[8] IR Sensor CBA Unit

[2] Rear Cabinet

[4] Power Supply CBA

[5] Stand Bracket

[7] LCD Module Assembly

[10] Front Cabinet

[6] Speaker

[9] Function CBA Unit

2. Disassembly Method

Step/

Loc.

No.

Stand

[1]

Assembly Rear

[2]

Cabinet

Digital Main

[3]

CBA UnitD2D3

Part

Fig.

No.

Removal Note

D1 3(S-1) ---

10(S-2), 3(S-3),

D1

2(S-4), 13(L-1) 4(S-5), CN3005,

CN3101, CN3102, CN3701, CN3801, CN3802, Jack Holder

---

Step/

Loc.

No.

Function

[9]

CBA UnitD2D3 Front

[10]

Cabinet

↓

(1)

Part

↓

(2)

Fig.

No.

Removal Note

Function Knob ---

D2 --------------- ---

↓

(3)

↓

(4)

↓

(5)

*1: LC320EM2 (Serial No.: DS1),

32MF301B/F7 (Serial No.: DS1), LC320SS2 (Serial No.: DS1)

*2:

LC320EM2 (Serial No.: DS2, DS3, DS4, DS5, DS6, DS7),

32MF301B/F7 (Serial No.: DS2, DS3, DS4, DS6) LC320SS2 (Serial No.: DS2, DS3), LC320EM2F (Serial No.: DS1, DS2, DS3, DS4), CLC320EM2F (Serial No.: DS1)

Note:

(1) Order of steps in procedure. When reassembling,

follow the steps in reverse order. These numbers are also used as the Identification (location) No. of parts in figures.

(2) Parts to be removed or installed. (3) Fig. No. showing procedure of part location (4) Identification of parts to be removed, unhooked,

unlocked, released, unplugged, unclamped, or desoldered. P = Spring, L = Locking Tab, S = Screw, H = Hex Screw, CN = Connector e.g. 2(S-2) = two Screws of (S-2), 2(L-2) = two Locking Tabs of (L-2)

(5) Refer to the following "Reference Notes in the

Table."

,

[4]

Power Supply CBA

5(S-6), CN200, CN600

D2

CN1100, CN1101,

D3

CN1102,

*1

, CN601*2,

Connector Cover

Stand

[5]

Bracket

[6] Speaker D2

D2 (S-7) ---

4(S-8), Speaker Holder

LCD

[7]

Module

D2 --------------- ---

Assembly IR Sensor

[8]

CBA UnitD2D3

Sensor Lens ---

---

*1

---

4-1 FL11.4-A_DC

(L-1)

(S-2)

(L-1)

[2] Rear Cabinet

[1] Stand Assembly

(S-2)

(L-1)

(S-3)

(L-1)

(S-3)

(S-2)

(S-4)

(S-2)

(S-1)

Fig. D1

4-2 FL11.4-A_DC

[10] Front Cabinet

[9] Function CBA Unit

[7] LCD Module Assembly

Function Knob

Sensor Lens

[8] IR Sensor CBA Unit

[4] Power Supply CBA

(S-6)

Speaker Holder

Connector Cover

(S-6)

[3] Digital Main CBA Unit

[5] Stand Bracket

(S-7)

Speaker Holder

(S-8)

*1

[6] Speaker

*1: LC320EM2 (Serial No.: DS1),

32MF301B/F7 (Serial No.: DS1), LC320SS2 (Serial No.: DS1)

Jack Holder

(S-5)

(S-8)

Fig. D2

4-3 FL11.4-A_DC

TV Cable Wiring Diagram

To LCD Module Assembly

CN200

CN1102

Power Supply CBA

To LCD Module Assembly

Digital Main CBA Unit

CN3005

CN1101

CN1100

IR Sensor CBA Unit

CN4052

CN632 CN3701

CN600

*1

*2

CN601

To AC Cord

Function CBA Unit

CN4001

CN3102

CN3802

CN3101

CN3801

To Speaker

*1: LC320EM2 (Serial No.: DS1),

32MF301B/F7 (Serial No.: DS1), LC320SS2 (Serial No.: DS1)

*2: LC320EM2 (Serial No.: DS2, DS3, DS4, DS5, DS6, DS7),

32MF301B/F7 (Serial No.: DS2, DS3, DS4, DS6), LC320SS2 (Serial No.: DS2, DS3) LC320EM2F (Serial No.: DS1, DS2, DS3, DS4), CLC320EM2F (Serial No.: DS1)

Fig. D3

4-4 FL11.4-A_DC

[TYPE B]

1. Disassembly Flowchart

This flowchart indicates the disassembly steps for the cabinet parts and the CBA in order to gain access to items to be serviced. When reassembling, follow the steps in reverse order. Bend, route and dress the cables as they were.

[1] Stand

Assembly

[3] Digital Main CBA Unit

[8] IR Sensor CBA Unit

[2] Rear Cabinet

[4] Power Supply CBA

[5] Stand Bracket

[7] LCD Module Assembly

[10] Front Cabinet

[6] Speaker

[9] Function CBA Unit

2. Disassembly Method

Step/

Loc.

No.

Part

Fig.

No.

Removal Note

Step/

Loc.

No.

Function

[9]

CBA UnitD2D3 Front

[10]

Cabinet

↓

(1)

Part

↓

(2)

Fig.

No.

Removal Note

Function Knob ---

D2 --------------- ---

↓

(3)

↓

(4)

↓

(5)

Note:

(1) Order of steps in procedure. When reassembling,

follow the steps in reverse order. These numbers are also used as the Identification (location) No. of parts in figures.

(2) Parts to be removed or installed. (3) Fig. No. showing procedure of part location (4) Identification of parts to be removed, unhooked,

unlocked, released, unplugged, unclamped, or desoldered. P = Spring, L = Locking Tab, S = Screw, H = Hex Screw, CN = Connector e.g. 2(S-2) = two Screws of (S-2), 2(L-2) = two Locking Tabs of (L-2)

(5) Refer to the following "Reference Notes in the

Table."

Stand

[1]

Assembly Rear

[2]

Cabinet

Digital Main

[3]

CBA UnitD2D3

Power

[4]

Supply CBA

Stand

[5]

Bracket

D1 3(S-1) ---

D1

D2 D3

D2 (S-7) ---

[6] Speaker D2

LCD

[7]

Module

D2 --------------- ---

Assembly IR Sensor

[8]

CBA UnitD2D3

10(S-2), 3(S-3), 2(S-4), 13(L-1)

---

4(S-5), CN3005, CN3101, CN3102, CN3701, CN3801,

---

CN3802, Jack Holder 5(S-6), CN200,

CN601, CN1100,

---

CN1101, CN1102

4(S-8), Speaker Holder

---

Sensor Lens ---

4-5 FL11.4-B_DC

(L-1)

(S-2)

(L-1)

[2] Rear Cabinet

[1] Stand Assembly

(S-2)

(L-1)

(S-3)

(L-1)

(S-3)

(S-2)

(S-4)

(S-2)

(S-1)

Fig. D1

4-6 FL11.4-B_DC

[10] Front Cabinet

[9] Function CBA Unit

[7] LCD Module Assembly

Function Knob

Sensor Lens

[8] IR Sensor CBA Unit

[4] Power Supply CBA

(S-6)

Speaker Holder

(S-6)

[3] Digital Main CBA Unit

[5] Stand Bracket

(S-7)

Speaker Holder

(S-8)

[6] Speaker

Jack Holder

(S-5)

(S-8)

Fig. D2

4-7 FL11.4-B_DC

TV Cable Wiring Diagram

To LCD Module Assembly

CN200

CN1102

Power Supply CBA

To LCD Module Assembly

Digital Main CBA Unit

CN3005

CN1101

CN1100

IR Sensor CBA Unit

CN4052

CN632 CN3701

CN601

To AC Cord

Function CBA Unit

CN4001

CN3102

CN3802

CN3101

CN3801

To Speaker

Fig. D3

4-8 FL11.4-B_DC

ELECTRICAL ADJUSTMENT INSTRUCTIONS

General Note: “CBA” is abbreviation for “Circuit Board Assembly.”

Note: Electrical adjustments are required after

replacing circuit components and certain mechanical parts. It is important to perform these adjustments only after all repairs and replacements have been completed. Also, do not attempt these adjustments unless the proper equipment is available.

Test Equipment Required

1. Remote control unit

2. Color Analyzer, CA-310 (KONICA MINOLTA Luminance meter) or measuring instrument as good as CA-310.

How to set up the service mode:

Service mode:

1. Turn the power on.

2. Press [MENU] button to display Setup menu.

3. Select “Features”.

4. Select “Current Software Info”.

5. Press [0], [4], [2], [5], [7], [4] and [INFO] buttons on the remote control unit in this order. The following screen appears.

"*" differs depending on the models.

Code: Pic code: Panel-Option code: MIPS:

Tuner: Safety: HDMI EDID: PC EDID:

****-*****-**** Safety_Non

** **

*******-**-**-****-** **********-***-*-** **-***-***-***-***

Push 0 key

Press "POWER" key to exit.

Total Watch Time: Lightsensor:

***** ****

5-1 FL11.4(LC9)EA

1. Purity Check Mode

2. VCOM Adjustment

This mode cycles through full-screen displays of red, green, blue, and white to check for non-active pixels.

1. Enter the Service mode.

2. Each time the [7] button on the remote control unit is pressed, the display changes as follows.

Purity Check Mode

White mode

[7] button

Black mode

[7] button

Red mode

[7] button

Green mode

[7] button

Blue mode

Test Point Adj. Point

Screen

M. EQ. Spec.

Color analyzer See below

To avoid interference from ambient light, this adjustment should be performed in a dark room.

Perpendicularity

[CHANNEL UP/DOWN]

buttons

Figure

Color Analyzer

All models except LC320EM2 (Serial No.: DS2, DS6, DS7, ME3) LC320EM2F (Serial No.: DS2, DS4) and 32MF301B/F7 (Serial No.: DS6, ME3):

1. Operate the unit for more than 60 minutes.

2. Set the color analyzer at the zero point calibration and bring the optical receptor pointing at the center of the LCD-Panel. Note: The optical receptor must be set perpendicularly to the LCD Panel surface.

3. Enter the Service mode.

4. Press [3] button on the remote control unit.

5. Press [CHANNEL UP/DOWN] buttons on the remote control unit so that the color analyzer value becomes minimum.

6. To cancel or to exit from the VCOM Adjustment, press [CH RETURN] or [PREV CH] button.

,

[7] button

White 20% mode

Note:

When entering this mode, the default setting is White mode.

3. To cancel or to exit from the Purity Check Mode, press [CH RETURN] or [PREV CH] button.

LC320EM2 (Serial No.: DS2, DS6, DS7, ME3) LC320EM2F (Serial No.: DS2, DS4) and 32MF301B/F7 (Serial No.: DS6, ME3):

1. Set the color analyzer at the zero point calibration and bring the optical receptor pointing at the center of the LCD-Panel. Note: The optical receptor must be set perpendicularly to the LCD Panel surface.

2. Enter the Service mode.

3. Press [2] button on the remote control unit.

4. Press [CHANNEL UP/DOWN] buttons on the remote control unit so that the color analyzer value becomes minimum within 2minutes from Power-On.

5. To cancel or to exit from the VCOM Adjustment, press [CH RETURN] or [PREV CH] button.

5-2 FL11.4(LC9)EA

,

The White Balance Adjustment should be performed when replacing the LCD Panel or Digital Main CBA.

3. White Balance Adjustment

6. Press [MENU] button. The internal Raster signal appears on the screen. (“Internal (Single)” appears on the upper right of the screen as shown below.)

Purpose: To mix red and blue beams correctly for pure white.

Symptom of Misadjustment: White becomes bluish or reddish.

ITEM

Color temperature

Input Signal

SPECIFICATION

x= 0.272 ± 0.002 y= 0.278 ± 0.002

Internal pattern (40/70% raster)

Measurement point Screen center

CA-310 (KONICA MINOLTA

M. EQ.

Luminance meter) or measuring instrument as good as CA-310.

60min.

Aging time

(Retail MODE/100IRE Raster HDMI 1080i@60)

MODE setting of TV

Ambient temperature

Shipment setting/ Retail MODE

25°C ± 5°C

1. Operate the unit for more than 60 minutes.

2. Enter the Service mode.

3. Press [VOLUME DOWN] button three times on the remote control unit to select “Drive setting” mode. “Drive” appears on the screen.

4. Set the color analyzer at the CHROMA mode and zero point calibration. Bring the optical receptor pointing at the center of the LCD-Panel.

To avoid interference from ambient light, this adjustment should be performed in a dark room.

Perpendicularity

Color Analyzer

Note: The optical receptor must be set perpendicularly to the LCD Panel surface.

5. Press [3] button to select the “HDB” for High Drive Blue adjustment. (“HDB” appears on the screen.)

Internal (Single)

HDB 0

7. Press [CHANNEL UP/DOWN] buttons to adjust the color temperature becomes 12000°K (x

=

0.272 / y= 0.278 ±0.002).

8. Press [1] button to select the “HDR” for High Drive Red adjustment (“HDR” appears on the screen.) and press [CHANNEL UP/DOWN] buttons to adjust the color temperature.

9. If necessary, adjust the “HDB” or “HDR” again.

10. Press [6] button to select the “LDB” for Low Drive Blue adjustment (“LDB” appears on the screen.) and press [CHANNEL UP/DOWN] buttons to adjust the color temperature.

Internal (Single)

LDB 0

11. Press [4] button to select the “LDR” for Low Drive Red adjustment (“LDR” appears on the screen.) and press [CHANNEL UP/DOWN] buttons to adjust the color temperature.

12. If necessary, adjust the “LDB” or “LDR” again.

13. Press [VOLUME DOWN] button to shift to the “Debugging Message” mode. If there is no message under “[WB]” section, this adjustment completes. If “Drive settings are NG. Retry.” is displayed, repeat above steps from 5. to 12. Then check “Debugging Message” again. If “Drive settings are NG. Retry.” is displayed, replace the LCD Panel or Digital Main CBA.

14. To cancel or to exit from the White Balance Adjustment, press [CH RETURN] or [PREV CH] button.

5-3 FL11.4(LC9)EA

HOW TO INITIALIZE THE LCD TV

The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to select a language and program channels after the set has been initialized. To put the program back at the factory-default, initialize the LCD TV using the following procedure.

1. Turn the power on.

2. Enter the service mode.

- To cancel the service mode, press [POWER] button on the remote control unit.

3. Press [FREEZE] button on the remote control unit to initialize the LCD television.

4. "INITIALIZED" will appear in the upper right of the screen. "INITIALIZED" color will change to green from red when initializing is completed.

6-1 LC9_INT

FIRMWARE RENEWAL MODE

Equipment Required

a. USB storage device b. Remote Control Unit

Firmware Update Procedure

Note: There are two states (the User Upgrade and

the Factory Upgrade) in firmware update.

User Upgrade Upgrade the firmware only.

The setting values are not initialized.

Factory Upgrade (Firmware upgrade)

Factory Upgrade (Flash upgrade)

The identification of User Upgrade and Factory Upgrade are done by the filename.

1. Turn the power off and unplug the AC Cord.

2. Insert the USB storage device to the USB port as shown below.

Rear Cabinet

Upgrade the firmware and initialize the setting values.

Upgrade the firmware and initialize the setting values along with the setting data adjusted at the factory such as White Balance, etc.

USB port

4. The update will start and the following will appear on the screen.

"*" differs depending on the models.

Software Upgrade

Software upgrade in progress. Please wait. Do not remove the USB storage device or turn the TV off while upgrade is in progress.

*1

Current Version:

New Version:

Downloading...

0%

*******-***-*-***-**** *******-***-*-***-****

Note: If the above screen isn’t displayed, repeat from

step 1.

The appearance shown in *1 is described as follows.

Appearance State

Downloading...

Writing...

Downloading the firmware from the USB storage device.

Writing the downloaded firmware in flash memory.

Checking... Checking the new firmware.

5. When the firmware update is completed, the following will appear on the screen.

Software Upgrade

USB storage device

3. Plug the AC cord in the wall outlet and turn the power on.

The software upgrade is completed. Remove USB storage device, turn TV off then on again.

Remove the USB storage device from the USB port. Turn the power off and turn the power on again.

Note:

When the Factory Upgrade is used, after restarting TV, shift to initial screen menu in service mode. "INITIALIZED" will appear on the upper right of the screen. "INITIALIZED" color will change to green from red when initializing is completed.

7-1 FL11.4FW

[Power Supply Section]

FLOW CHART NO.1

The power cannot be turned on.

TROUBLESHOOTING

Is the fuse (F601) normal?

Ye s

Is normal state restored when once unplugged power cord is plugged again after several seconds?

Ye s

Is the P-ON+24V line voltage normal?

Ye s

Check each rectifying circuit of the secondary circuit and service it if de

FLOW CHART NO.2

The fuse blows out.

Check the presence that the primary component is leaking or shorted and service it if defective.

After servicing, replace the fuse.

FLOW CHART NO.3

When the output voltage fluctuates.

fective.

No

See FLOW CHART No.2 <The fuse blows out.>

Check if there is any leak or short-circuiting on the primary circuit component, and service it if defective. (D600, D601, D602, D603, Q600, Q601, T600)

Check the presence that the rectifying diode or circuit is shorted in each rectifying circuit of secondary side, and service it if defective.

Does the photocoupler circuit on secondary side operate normally?

Check IC601, D and service it if de

FLOW CHART NO.4

When buzz sound can be heard in the vicinity of power circuit.

Check if there is any short-circuit on the rectifying diode and the circuit and service it if def

607, D609 and their periphery circuit,

fective.

ective. (IC202, Q212, Q213, Q221, Q222, Q636, D634, D637, D642, D

the

Ye s

No

Check IC601, D648, Q631, Q634 and their periphery circuit, and service it if defective.

in each rec

tifying circuit of the secondary side,

643, D644, D646, D660)

8-1 FL11.4ATR

FLOW CHART NO.5

P-ON+24V is not output.

Is approximately +24V voltage supplied to the cathode of D637?

Ye s

Check for short-circuiting or leak on the load ci and service it if defective.

FLOW CHART NO.6

LCD+24.5V is not output.

Is approximately

+35V voltage supplied to the collector

of Q212?

Ye s

Is approximately

+25V voltage supp

lied to the base

of Q212?

Ye s

Replace Q212.

FLOW CHART NO.7

PANEL+15.8V is not output.

rcuit,

No

Check C648, D637, D644, D646, D648 and their periphery circuit, and service it if defective.

Check C647, D660 and their periphery circuit, and service it if defective.

Check Q210, Q211, D207, P-ON-H1 l periphery circuit, and ser

vice it if defective.

ine and their

Is approximately +22V voltage supplied to the collector of Q221?

Ye s

Is approximately +

16V voltage supplied to the

base of Q221?

Ye s

Replace Q221.

FLOW CHART NO.8

AMP+24V is not output.

Is approximately +24V voltage supplied to the cathode of D634?

Ye s

Check for short-circuiting or leak on the load circuit, and service it if def

ective.

No

Check C637, D640, D645 and their per

iphery circuit,

and service it if defective.

Check Q210, Q211, D202, D221, D222, P-ON-H1 line and their periphery circuit, and service it if defective.

Check C631, D634 and their periphery circuit, and service it if defective.

8-2 FL11.4ATR

FLOW CHART NO.9

AL+5V is not output.

Is approximately +24V voltage supplied to the collector of Q636?

Ye s

Is approximately +5.6V voltage supplied to the base of Q636?

Ye s

Replace Q636.

FLOW CHART NO.10

P-ON+3.3V is not output.

Is approximately

+8.5V voltage supplied to Pin(1) of

IC202?

Ye s

Is approximately +7.5V voltage supp

lied to Pin(2) of

IC202?

Ye s

Replace IC202.

No

See FLOW CHART No.5 <P-ON+24V is not output.>

Check D656 and their periphery circuit, and service it if defective.

Check C639, D643 and their periphery circuit, and service it if defective.

Check Q207, Q208 P-ON-H2 line an

d their periphery

circuit, and service it if defective.

FLOW CHART NO.11

LCD-6V is not output.

Is approximately -9.5V voltage supplied to the anode of D642?

Ye s

Is approximately -9V voltage supplied to the base of Q213?

Ye s

Replace Q213.

No

Check C638, D642 and their periphery circuit, and service it if defective.

Check Q210, Q211, D208, P-ON-H1 periphery circuit, and ser

vice it if defective.

line and their

8-3 FL11.4ATR

[Video Signal Section]

FLOW CHART NO.1

The key operation is not functioning.

When pressing each switches (SW4001~SW4007) do the voltage of Pin(2) of CN4001 decrease?

Ye s

Replace Digital Main CBA Unit.

FLOW CHART NO.2

No operation is possible from the remote control unit.

Operation is pos

Is approximately +3.3V voltage supplied to Pin(3) terminal of the remote control receiver (RS4051)?

Is the "L" pulse sent out Pin(1) terminal of remote control receiver (RS4051

control is activated?

Is the "L" pulse supplied to Pin(2) of CN4052?

sible from the unit.

Ye s

) when the infrared remote

Ye s

No

Replace the Function CBA Unit.

Check AL+3.3V line and service it if defective.

Replace the IR Sensor CBA Unit or the remote control unit.

Replace the IR Sensor CBA Unit.

Replace Digital Main CBA Unit.

FLOW CHART NO.3

Picture does not appear normally.

Is approximately +5.7V voltage supp CN632?

Ye s

Is approximately +24V voltage supplied to Pin(13, 14) of CN632?

Ye s

approximately +

Is CN632?

CL3005, Digital Main CBA Unit or LCD Module Assembly may be defective. Check and replace these parts.

24V voltage supplied to Pin(16, 17) of

Ye s

lied to Pin(11) of

No

See FLOW CHART NO.9 <AL+5V is not output. [Power Supply Section]>

See FLOW CHART NO.8 <AMP+24V is not output. [Power Supply Section]>

See FLOW CHART NO.5 <P-ON+24V is not output. [Power Supply Section]>

8-4 FL11.4ATR

[Audio Signal Section]

FLOW CHART NO.1

Audio is not outputted normally.

Is approximately +5.7V voltage supplied to Pin(11) of CN632?

Ye s

Is approximately +24V voltage supplied to Pin(13, 14) of CN632?

Ye s

approximately +

Is CN632?

Are the audio signals outputted to Pin(1) of CN and Pin(1) of CN3802?

SP3801, SP3802, CL3801 or CL3802 may be defective. Check and replace these parts.

24V voltage supplied to Pin(16, 17) of

Ye s

3801

Ye s

No

See FLOW CHART NO.9 <AL+5V is not output. [Power Supply Section]>

See FLOW CHART NO.8 <AMP+24V is not output. [Power Supply Section]>

See FLOW CHART NO.5 <P-ON+24V is not output. [Power Supply Section]>

Replace Digital Main CBA Unit.

8-5 FL11.4ATR

BLOCK DIAGRAMS

1. System Control Block Diagram

AL+3.3V

D4051

STANDBY

KEY SWITCH

FUNCTION CBA UNIT

CN4001

REMOTE

RS4051

SENSOR

IR SENSOR CBA UNIT

P-ON-H2

CN632

TO

POWER SUPPLY

P-ON-H1

PROTECT1

BLOCK DIAGRAM

PROTECT3

VCOM-PWM

DRIVE

IC200, Q202,

Q203, Q204

PROTECT3

CN632

TO INVERTER

BACKLIGHT-SW

BLOCK DIAGRAM

BACKLIGHT-ADJ

POWER SUPPLY CBA

KEY-IN122

CN3101

Q3501

LED DRIVE

J16

A15

C14

LED1

KEY-IN1

REMOTE

REMOTE22

LED155

CN3102 CN4052

Q3006

AL+3.3V

Q3005

B16

P-ON-H2

P-ON-H277

P-ON-H166

PROTECT155

CN3701

C1

C13

P-ON-H1

PROTECT1

PROTECT344

BACKLIGHT-SW

VCOM-PWM11

TO VIDEO/AUDIO

BACKLIGHT-SW

F2

VCOM-PWM

BACKLIGHT-ADJ

22

33

CN3701

BLOCK DIAGRAM

F3

E2

B13

PROTECT3

BACKLIGHT-SW

BACKLIGHT-ADJ

SCL

SDA

TU3401 (TUNER UNIT)

4

3

T12

R12

SCL

SDA

DIGITAL MAIN CBA UNIT

IC3005

(MAIN MICRO CONTROLLER)

AUDIO-MUTE

G13

AUDIO-MUTE

TO

VIDEO/AUDIO

BLOCK DIAGRAM

9-1

SFCX

SFTX

SFRX

SFCS-N

T11

P11

P12

R11

652

1

SI

CS

SO

SCK

IC3006 (MEMORY)

X3001

XOUT25

XIN25

H15

H16

25MHz

OSC

FL11.4ABLS

2. Video/Audio Block Diagram

AUDIO SIGNAL

TO DIGITAL

SIGNAL PROCESS

BLOCK DIAGRAM

TO SYSTEM CONTROL

BLOCK DIAGRAM

VIDEO SIGNAL

VGA-R-IN

VGA-B-IN

VGA-G-IN

PC-SCL

VGA-VSYNC

VGA-HSYNC

PC-SDA

(TUNER UNIT)

IF-AGC

DIF-OUT2

DIF-OUT1

6

7

DIF-OUT1

DIF-OUT2

COM-VIDEO-Y/VIDEO-IN

5

IF-AGC

COMP-DET

COM-VIDEO-Pr-IN

COM-VIDEO-Pb-IN

AUDIO(L)

AUDIO(R)

SPDIF

AMP(L)-OUT

19

AMP(R)-OUT

AUDIO-MUTE

Q3802

34

32

BACKLIGHT-SW

Q3803

P-ON+5V

DIGITAL MAIN CBA UNIT

Q3804

17

TU3401

BUFFER GATE

IC3013

IC3014

123

131415

JK3001

PC-RGB

IN

12

WF1

JK3701

WF2

WF3

COMPONENT

-Y/VIDEO-IN

COMPONENT

-Pb-IN

COMPONENT

-Pr-IN

9-2

WF4

BUFFER

Q3702

JK3701

BUFFER

Q3703

AUDIO(L)-IN

Q3701

AUDIO(R)-IN

BUFFER

DIGITAL

JK3702

AUDIO-OUT

(COAXIAL)

DRIVE PWM

IC3801 (AUDIO AMP)

11,12

DRIVE PWM

39,40

CN3801

1

SP(L)

SP3801

CONTROL LOGIC

2

SP-GND

SPEAKER

L-CH

2

1

CN3802

SP(R)

SP-GND

SP3802

SPEAKER

R-CH

FL11.4ABLV

3. Digital Signal Process Block Diagram

LCD MODULE

ASSEMBLY

LLV0(-)22

LLV0(+)23

LLV1(+)21

LLV2(+)19

LLV2(-)18

LLV3(+)13

LLV3(-)12

LLV4(+)11

LLV5(+)9

LLV5(-)8

LLVCLK(+)16

LLVCLK(-)15

TP6

POL5

CPV4

R15

L13

TP

M15

POL

L16

CPV

OE13

L15

OE

STV1

M14

STV

AUDIO SIGNAL

VIDEO SIGNAL

CN3005

P14

P13

N16

LLV1(-)20

N15

P16

P15

T16

T15

R14

LLV4(-)10

T14

R13

T13

R16

IC3002

(DDR2 SDRAM)

B1,B9,C2,C8,

D1,D3,D7,D9,

N4,N7,N8,P3,P4,

DATA(0-15)

ADDRESS(0-12)

H1,H3,H7,H9

F1,F9,G2,G8,

M2,M3,M7,M8,

N2,N3,N7,N8,

P2,P3,P7,P8,R2

P6-P8,R3,R4,R6,

R8,T2-T5

H1,H2,J1,J2,J4,K1,

K3,L1,L2,M1-M3,N1

HSIN

IC3005 (DIGITAL SIGNAL PROCESS)

A14

VSIN

B14

C11

LVD S T X

DIGITAL

SIGNAL

PROCESS

DIGITAL MAIN CBA UNIT

HDMI

AUDIO I/F

A/D

CONVERTER

DEMODULATOR

B11

C10

/MPEG DECODER

COMP-DET

IF-AGC

A12

A16

B12

N12

A8

A7

B7

N10

SW

A9

D8

C9

C7

AUDI O

DECODER

IC3018 (HDMI SW)

414544484739383637

B4A4B3

26272324202117

I/F

A3B2A2B1A1

HDMI

SW

8

18

7

111014

VIDEO

DECODER

541

13

HDMI-SCL

HDMI-SDA

F14

G14

6

7

SCL0

SDA0

SCL1

SDA1

SCL3

SDA3

SCL2

3

101115

SDA2

14

IC3011

(HDMI SERIAL EEPROM)

2

VGA-VSYNC

VGA-B-IN

TO

VIDEO/AUDIO

BLOCK DIAGRAM

VGA-HSYNC

DIF-OUT1

DIF-OUT2

COM-VIDEO-Pr-IN

COM-VIDEO-Pb-IN

COM-VIDEO-Y/VIDEO-IN

VGA-R-IN

VGA-G-IN

IF-AGC

COMP-DETB8AUDIO(R)

AUDIO(L)

SPDIF

(R)-OUT

(L)-OUT

AMP

HDMI-IN1

JK3003

TMDS-D0(+)

TMDS-D0(-)

TMDS-D1(+)

7 42

94613

9-3

TMDS-D1(-)

TMDS-D2(+)

TMDS-D2(-)

TMDS-CLOCK(+)

TMDS-CLOCK(-)

SDA

SCL

101216

15

JK3002

HDMI-IN2

TMDS-D0(+)

TMDS-D0(-)

TMDS-D1(+)

79461

TMDS-D1(-)

TMDS-D2(+)

TMDS-D2(-)

3

TMDS-CLOCK(+)

TMDS-CLOCK(-)

SDA

SCL

101216

15

PC-SDA

PC-SCL

TO

VIDEO/AUDIO

BLOCK DIAGRAM

FL11.4ABLD

4. Inverter Block Diagram

BACK

1

CN1100

LIGHT

2

768

5

BACK

1

CN1101

LIGHT

2

BACK

LIGHT

LCD MODULE

ASSEMBLY

1

2

CN1102

768

5

T1100

STB

7

SWITCHING

Q1700

21

T1101

2

Q1701

24

Q1301

3

4

2

1

+24V

IC1200

(PWM CONTROL)

Q1303

4

SWITCHING

OUTPUT

LOGIC

DUTY

12

1

Q1702

Q1201

3

SWITCHING

4

PWM

FEED

BACK

17

2

16

SWITCHING

Q1703

T1102

PROTECT

3

4

2

1

18

13

POWER SUPPLY CBA

Q1202

+12V REG.

Q1300

+24V

BACKLIGHT-ADJ

BACKLIGHT-SW

PROTECT3

TO SYSTEM CONTROL

BLOCK DIAGRAM

9-4

FL11.4BLINV

5. Power Supply Block Diagram

For continued protection against risk of fire,

replace only with same type 4 A, 125V fuse.

CAUTION ! :

ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V.

4A/125V

NOTE:

The voltage for parts in hot circuit is measured using

hot GND as a common terminal.

AMP+24V

AL+5V

P-ON+24V

DIGITAL MAIN CBA UNIT

11

13,14

LCD MODULE ASSEMBLY

16,17

TO SYSTEM

CONTROL

BLOCK

P-ON-H1

P-ON-H2

PROTECT1

VCOM-PWM

DIAGRAM

PROTECT3

+24V

LCD-6V8

CN200

SW-9.5V

Q213

P-ON+3.3V6,7

VGH4

PANEL+15.8V2,3

SW

Q200, Q201,

Q206

SW+24V

Q212

9

AMP+24V13,14

AL+5V11

CN632 CN3701

Q210,Q211

P-ON+24V16,17

SWITCHING

11

+3.3V REG.

IC202

Q214

+5V REG.

Q636

SWITCHING

Q207,Q208

SW+15.8V

Q221, Q222,

D221

FEED

BACK

12

13

14

15

Q634

14

Q632

Q635

Q631

VCOM10

10

3

T600

BRIDGE

RECTIFIER

D600- D603

LINE

FILTER

L601

LINE

FILTER

L600

F601

4A/125V

CN601

*1

*2

AC600

CN600

AC CORD

1

2

CAUTION !

Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.

HOT CIRCUIT. BE CAREFUL.

If Main Fuse (F601) is blown , check to see that all components in the power supply

circuit are not defective before you connect the AC plug to the AC power supply.

Otherwise it may cause some components in the power supply circuit to fail.

4

4A/125V

32MF301B/F7 (Serial No.: DS1),

*1 LC320EM2 (Serial No.: DS1),

5

LC320SS2 (Serial No.: DS1)

ME3, TH1),

LC320EM2F (Serial No.: DS1, DS2, DS3, DS4),

32MF301B/F7 (Serial No.: DS2, DS3, DS4, DS6, ME1, ME3, TH1),

LC320SS2 (Serial No.: DS2, DS3, ME1, TH1)

CLC320EM2F (Serial No.: DS1)

*2 LC320EM2 (Serial No.: DS2, DS3, DS4, DS5, DS6, DS7, ME1,

8

9-5

7

SWITCHING

Q600

IC601

ERROR

VOLTAGE DET

3 2

Q601

SWITCHING

HOT COLD

CONTROL

POWER SUPPLY CBA

FL11.4ABLP

SCHEMATIC DIAGRAMS / CBA AND TEST POINTS

Standard Notes

WARNING

Many electrical and mechanical parts in this chassis have special characteristics. These characteristics often pass unnoticed and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Replacement parts that have these special safety characteristics are identified in this manual and its supplements; electrical components having such features are identified by the mark “#” in the schematic diagram and the parts list. Before replacing any of these components, read the parts list in this manual carefully. The use of substitute replacement parts that do not have the same safety characteristics as specified in the parts list may create shock, fire, or other hazards.

Notes:

1. Do not use the part number shown on these drawings for ordering. The correct part number is shown in the parts list, and may be slightly different or amended since these drawings were prepared.

2. All resistance values are indicated in ohms (K = 10

3. Resistor wattages are 1/4W or 1/6W unless otherwise specified.

4. All capacitance values are indicated in µF (P = 10

5. All voltages are DC voltages unless otherwise specified.

6.

This schematic diagrams are masterized version that should cover the entire FL11.4 chassis models. Thus some parts in detail illustrated on this schematic diagrams may vary depend on the model within the FL11.4 chassis. Please refer to the parts lists for each models.

7. The Circuit Board layout illustrated on this service manual is the latest version for this chassis at the moment of making this service manual. Depend on the mass production date of each model, the actual layout of each Board may differ slightly from this version.

3

, M = 106).

-6

µF).

10-1 FL11.4SC

LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON

r

THE FOLLOWING PAGES:

1. CAUTION:

CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME

TYPE_A,_V FUSE.

ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE DE_A,_V.

2. CAUTION:

Fixed Voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F601) is blown, first check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail.

3. Note:

1. Do not use the part number shown on the drawings for ordering. The correct part number is shown in the parts list, and may be slightly different or amended since the drawings were prepared.

2. To maintain original function and reliability of repaired units, use only original replacement parts which are listed with their part numbers in the parts list section of the service manual.

4. Voltage indications on the schematics are as shown below:

Plug the TV power cord into a standard AC outlet.:

2

(Unit: Volt)

1

5.0 5.0

3

Power on mode

5. How to read converged lines

1-D3

Distinction Area

Line Number (1 to 3 digits)

Examples:

1. "1-D3" means that line number "1" goes to the line numbe "1" of the area "D3".

2. "1-B1" means that line number "1" goes to the line number "1" of the area "B1".

6. Test Point Information

: Indicates a test point with a jumper wire across a hole in the PCB. : Used to indicate a test point with a component lead on foil side. : Used to indicate a test point with no test pin. : Used to indicate a test point with a test pin.

Voltage

Indicates that the voltage is not consistent here.

3

2

1

AREA D3

1-B1

AREA B1

1-D3

ABCD

The reference number of parts on Schematic Diagrams/CBA can be retrieved by application search function.

10-2 FL11.4SC

10-3

SK16-T/R

D649

22K

R254

D211

100/25V

C638

3.9K

R609

47K

R266

4321

IC601 TLP781F (D4-FUNBLL F)

2SC2120-Y

Q221

0.47/250V

C601

22K

R253

0.47/250V

C600

KTC3875S-Y-RTK/P

Q631

BEAD

BC602

1ZB22BB

D645

1N5406-BU

D601

D222

CN600 2

KTC3875S-Y-RTK/P

Q213

SK16-T/R

D642

18K

R644

PROTECT3

WIRE

R660

2.2K

R238

1N5406-BU

D603

P-ON+3.3V

SB3150BH

D644

D202

12 GND

270

R610

SB3150BH

D634

5V6BSB-T26

D632

8.2 /1/2W

R233

15 GND

D221 KIA431-AT/P 39K

R268

1500P

C609

120

R636

100/50V

C647

3 BACKLIGHT-ADJ

OPEN

D606

680

R258

47K

R632

LCD+24.5V

5 PROTECT1

D212

4V3BSB-T26

D605

D609

KTC3875S-Y-RTK/P

Q633

KTC3875S-Y-RTK/P

Q211

1200P

C606

150

R255

2.2/50V

C228

1N5406-BU

D602

D207

1000P/250V

C610

0.18 /2W

R608

0.068

C608

47K

R267

120

R606

LCD-6V

100 /10V

C639

33BSB-T26

D205

1N5406-BU

D600

D641

16 P-ON+24V

KTC3199-GR-AT/P

Q636

47K

R260

OPEN

D609A

22k

R251

6 P-ON-H1

75K

R642

1

4A 125V

2.2/5W

R602

2SC2120-Y

Q601

39K

R252

SURGE ABSORBER

SA601

4A/125V

F601

15

R657

BACKLIGHT-SW

15K

R264

G

D

S

TK10A50D

Q600

470/25V

C6371.2M/1/2W

R601

1ZB220

-YBB

D611

5V6BSB-T26

D650

1000/35V

C631

1.2K

R607

1 VCOM-PWM

5.6 /1/2W/1/2W

R234

KTC3875S-Y-RTK/P

Q635

1000P/250V

C612

220K

R603

SK16-T/R

D643

P-ON-H1

11 AL+5V

8.2/1W

R239

820

R651

1000P/250V

C611

2.2/5W

R611

1.5K

R270 0

R237

C221

0.01

10K

R654

L600

LINE FILTER

SK2B-TR

D640

12K

R262

2SA950-O

Q222

OPEN

R258A

22K

R261

27BSB-T26

D604

D208

OE2

2SA1576UBTLQ

Q210

OPEN

C633

270

R263

KTC3875S-Y-RTK/P

Q214

WIRE

R256

0.1

C605

BEAD

BC601

L601 LINE FILTER

D607

D206

5V1BSB-T26

D210

9OE2

47K

R643

RS1GJTB

D660

KTC3875S-Y-RTK/P

Q212

2200P/1KV

C641

BACKLIGHT-ADJ

820P /2KV

C607

470/25V

C220

27K

R645

2 BACKLIGHT-SW

9.1K

R236

220K

R604

KTC3875S-Y-RTK/P

Q634

P-ON-H1-1

120

R605

1ZB36BB

D610

1/50V

C644

1

R650

1ZB30BB

D648

2200/35V

C648

VCOM-PWM

27K

R647

4 PROTECT3

3

4

5

7

8

15

14

13

12

11

10

9

POWER TRANS

T600

220K

R600

OPEN

R605A

OPEN

R606A

OPEN

R607A

OPEN

R610A

OPEN

D612

270 /200V

C603

270 /200V

C604

OPEN

C614

2200P /1KV

C613

68K /1W

R612 68K /1W

R613

FR155-B/P

D613

5V6BSB-T26

D631

10K

R637

120

R635

5V6BSB-T26

D654

15K

R631

SB3150BH

D646

SB3150BH

D637

2200/35V

C649

3.9K

R649

OPEN

R649A

OPEN

R636A

OPEN

R635A

C645 2200P

18K

R652

47K

R655

123 54

IC202 PQ200WNA1ZPH

VCVOVIN

ADJ

GND

10/50V

C217

0.1

C216

47K

R227

0.1

C225

4.7K

R228

2SA1576UBTLQ

Q207

22K

R229

10K

R230

KTC3875S-Y-RTK/P

Q208

47K

R231

3.3/50V

C226

10K

R232

1

C223

330

R226

240

R243

2.2K

R244

OPEN

C224

100/10V

C230

OPEN

R245A

OPEN

R245

D651

39K

R663

JS660

RS1GJTB

D661

RS1GJTB

D662

12K

R269

OPEN

C222

OPEN

R259

OPEN

R259A

47K

R257

OPEN

R257A

22/50V

C227

OPEN

R255A

8.2K

R265

OPEN

R265A

56K

R248

6.8K

R249

OPEN

R263A

OPEN

R268A

OPEN

R266A

D639

OPEN

R657A

3V3BSB-T26

D655

7 P-ON-H2

5V6BSB-T26

D656

220

R659

220

R658

220

R656

220

R662

OPEN

R659A

OPEN

R658A

OPEN

R656A

OPEN

R662A

D657 10BSB-T26

D638

22K

R641

22K

R638KTC3875S-Y-RTK/P

Q632

WIRE

R634

WIRE

R633

OPEN

D636 D658

OPEN

D659

OPEN

R634A

OPEN

R633A

1ZB7.5BB

D635

100/10V

C646

6.8K

R241

2.7K

R242

0.1

C231

0.1

C634

8 RESET

PROTECT3

10 GND

13 AMP+24V

14 AMP+24V

17 P-ON+24V

18 GND

CN632

19 GND

+24V

PANEL+15.8V

0.1

C635

0.1

C636

D652

5V6BSB-T26

D633

1000/35V

C632

10KR664

D663

3.9K

R240

3.9K

R246

OPEN

C229

AC CORD

AC600

100K

R247

1

CN601 2

390 /200V

C602

5.6

R235

22.7

4

0

A

(SWITCHING)

22.7

B

2.2

D

(SWITCHING)

CE

0.7

0.1

F

5.6

0

POWER SUPPLY CBA

CONTINUE POWER 2

6.2

(FEED BACK)

ERROR VOLTAGE DET

(+3.3V REG.)

(SWITCHING)

19.3

SWITCHING CONTROL

TO DIGITAL MAIN CBA UNIT CN3701

(SW+15.8V)

0

HOT

CONTINUE POWER 2

(RESET)

0

COLD

(SW-9.5V)

HOT CIRCUIT. BE CAREFUL.

24.0

165.8

CONTINUE POWER 3

24.0

0.1

(SW+24V)

0

3.7

35.2

0.1

24.4

24.2

0

24.8

24.4

2

0.6

0

5.7

2.6

3.4

-8.9

3.3

-9.6

3.1

0

-3.5

0.7

0.4

0

14.0

0.9

0.4

2.6

0

3.7

0.6

21.9 15.8

16.0

8.5

(SWITCHING)

(SW+15.8V)

(+5V REG.)

(SWITCHING)

7.4

31.9

6.4

3.3

37.1

24.0

21.9

0.1

1.6

5.6

37.8

15.8

0.7

21.9

UNLESS OTHERWISE SPECIFIED: DIODES ARE 1SS133.

0

1

23.7

3

0

0.7

0.1

0

1.6

(SWITCHING)

CONTINUE POWER 3

(SWITCHING)

1.3 0

8.6 8.6

7.9

(SWITCHING)

3.1

*2

OR

FL11.4SCM1

Power Supply 1 Schematic Diagram

NOTE:

The voltage for parts in hot circuit is measured using hot GND as a common terminal.

CAUTION !

Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F601) is blown , check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail.

For continued protection against risk of fire, replace only with same type 4 A, 125V fuse.

CAUTION ! :

ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V.

4A/125V

NOTE2

IC202

KIA78R000ZF-RTF/P

PQ200WNA1ZPH

Type 1 Type 2

R226

R244

1.4k

330

2.2k

1k

You cannot mix components under Type 1 with the ones under Type 2. Refer to Parts List of LC320EM2(Serial No.: DS1).

10-4

P-ON+3.3V 6

Q200 2SA1576UBTLQ

P-ON-H1

10K

R225

GND 11

2.2/50V

C203

OPEN

C210

PROTECT3

OPEN

C675

1000P

C211

P-ON+3.3V

OPEN

C207

22/50V

C208

1

R207

0

R210

GND 5

VCOM-PWM

1.5K

R216

OPEN

C204

D201 1SS133

100K

R206

0

R213

1K

R201

OPEN

R221

0.1

C201

LCD+15.8V 3

10K

R222

OPEN

R202

J200 OPEN

0

R208

VGH 4

1

C213

OPEN

C206

10K

R218

OPEN

R220

OPEN

R214

OPEN

R204

D200 1SS133

OPEN

C215

PANEL+15.8V

GND 9

LCD+15.8V 2

47/25V

C214

JS200

Q203 2SA1576UBTLQ

0.1

C200

OPEN

C209

VCOM 10

1K

R203

10

R211

47K

R224

KTC3875S-Y-RTK/P

Q202

KTC3875S-Y-RTK/P

Q206

OPEN

R223

1K

R219

1234

5678

VCC

VEE

IC200 TL3472CDR

10K

R217

LCD-6V 8

100K

R212

100K

R200

KTC3875S-Y-RTK/P

Q204

OE2

10

R209

LCD-6V

0.1

C202

CN200

GND 1

P-ON+3.3V 7

KTC3875S-Y-RTK/P

Q201

0.1

C212

OPEN

Q205

1K

R205 0.1

C205

LCD+24.5V

OPEN

C218

2K

R203A

OPEN

R211A

OPEN

R209A

P-ON-H1-1

10K

R215

0

7.3

-6.1

20.0

H

23.5

7.0

0

(SWITCHING)

0

2

0

4

23.9

(COMPARATOR)

3.3

7.3

3.3

J

CONTINUE POWER 1

0

G

0.6

(SWITCHING)

0

7.0

(V-COM DRIVE)

0

I

0

15.7

15.8

K

(V-COM DRIVE)

18.4

0

19.9

POWER SUPPLY CBA

0

(V-COM DRIVE)

CONTINUE POWER 1

7.0

(SWITCHING)

0

0.4

1.2

15.8

1

15.8

7.0

L

TO LCD MODULE ASSEMBLY

7.0

7.4

0.2

3

0.6

FL11.4SCM2

Power Supply 2 Schematic Diagram

10-5

T1102 INVERTER TRANS

2

1

4

3

5

6

7

8

Q1702

TK40P04M1

G

D

S

39K

R1112

10

R1222

13

R1117

100

R1216

2200/35V

C1709

2

5V6BSB-T26

D1300

0

R1214

100KR1510

D1507 DAN202U

0.022

C1705

100

R1131

47K

R1301

10

R1223

10P/6.3KV

C1108

2.2K

R1126

2.2K

R1102

1000P

C1704

2.2C1102

2.2K

R1135

0.1

C1303

2.2C1101

D1503 DAN202U

0.47

C1209

KTC3875S-Y-RTK/P

Q1202

0.47

C1208

+24V

T1100 INVERTER TRANS

2

1

4

3

5

6

7

8

1000P

C1703

5V6BSB-T26

D1301

510/2W

R1305

OPEN

C1701

1M

R1513

100KR1506

1

C1710

D1703 15BSB-T26

0

R1125

1SS133

D1702

10P/6.3KV

C1104

1000P

C1707

JS1200

0.1

C1300

1000P

C1706

OPENR1115A

OPEN

Q1204

10K

R1703

0.01

C1500

OPEN

C1200

0.1

C1201

0.1

C1305

CN1100

1

D1508 DAN202U

1SS133

D1700

PROTECT3

0.47

C1210

CN1102

1

D1501 DAN202U

10/50V

C1206

1SS133

D1706

39K

R1514

330P

C1107

4.7/1W

R1709

100KR1512

1M

R1500

CN1101

1

100KR1508

D1707 15BSB-T26

OPEN

R1226

75K

R1204

OPENR1147

130K

R1202

22K

R1310

2.2C1116

1000P

C1207

2.2C1100

D1705 15BSB-T26

1

C1702

330P

C1118

6800P

C1202

22K

R1208

2

OPENR1150

D1506 DAN202U

2

2.2K

R1123

8.2K

R1203

2SA1576UBTLQ

Q1303

0

R1113

470R1118

OPEN

R1225

100KR1502

1000P

C1301

100KR1505

100

R1707

D1505 DAN202U

10P/6.3KV

C1110

2.2C1117

10P/6.3KV

C1106

470R1106

0

R1101

100

R1107

OPEN

R1220

10K

R1708

13

R1129

470R1130

0.47

C1212

10K

R1215

2.2K

R1114

2.2K

R1111

2SA1576UBTLQ

Q1300

100KR1504

4.7K

R1209

100KR1511

OPENR1146

10K

R1309

13

R1105

Q1701 TK40P04M1

G

D

S

10P/6.3KV

C1114

D1202 1SS133

T1101 INVERTER TRANS

2

1

4

3

5

6

7

8

39K

R1124

330P

C1123

0.022

C1708

330P

C1119

4.7/1W

R1704

10K

R1206

OPENR1145

330P

C1113

OPENR1118A

Q1700 TK40P04M1

G

D

S

330P

C1109

330P

C1105

Q1203 OPEN

13

R1132

330P

C1122

BACKLIGHT-ADJ

2200/35V

C1700

39K

R1109

0

R1229

560K

R1205

1K

R1307

100KR1507

13

R1108

39K

R1121

D1200 1SS133

68K

R1200

D1201 1SS133

D1504 DAN202U

0.01

C1213

10/50V

C1302

OPENR1106A

4.7K

R1308

100

R1116

10P/6.3KV

C1112

KTC3875S-Y-RTK/P

Q1201

2.2

C1205

4.7K

R1304

68K

R1201

0

R1134

OPEN

R1228

OPENR1103A

470R1115

39K

R1133

10K

R1701

1

R1221

0

R1122

OPEN

C1214

470R1127

OPEN

R1227

100

R1128

3300P

C1502

100KR1503

D1502 DAN202U

330P

C1111

OPENR1148

100

R1700

100

R1104

100KR1501

10K

R1306

D1701 15BSB-T26

BACKLIGHT-SW

51K

R1302

1000P

C1311

2.2C1103100

R1702

13

R1120

10K

R1706

330P

C1115

1000P

C1501

1SS133

D1203

D1500 DAN202U

10K

R1300

OPEN

C1211

OPENR1127A

1SS133

D1704

330P

C1120

27K

R1515

6.8K

R1516

330P

C1121

33K

R1207

Q1703

TK40P04M1

G

D

S

100KR1509

100

R1119

39K

R1100

100

R1705

KTC3875S

-Y-RTK/P

Q1301

4.7K

R1213

0

R1110

220/35V

C1304

OPENR1130A

4.7K

R1303

OPENR1143

10K

R1212

470R1103

6800P

C1203

0.1

C1204

1

2

3

4

5

6

7

9

10

8

11

12 13

14

24

23

21

18

19

22

17

20

15

16

VCC

STB

GND

DUTY

OSC

OUTPUT

LOGIC

PWM

REG

VLO

PROTECT

FEED BACK

IC1200 BD9244AFV

2

O

3

M RNPQ

1

4

0.1

(+12V REG.)

12.0

(SW+12V)

0.1

0.7

0

LCD MODULE ASSEMBLY

0

(SWITCHING)

3.1

POWER SUPPLY CBA

11.2

(SWITCHING)

-0.2

BACK LIGHT

0

11.9

1.8

BACK LIGHT

12.0

5.1

0

(SWITCHING)

11.2

(PWM CONTROL)

12.0

0

(SWITCHING)

0.2

(SWITCHING)

CONTINUE POWER 1

(SWITCHING)

3.1

1.8

23.8

21.8

17.8

11.9

5.9

2.0

0

3.1

7.6

24.1

21.2

16.9

2.2

0.2

0.8

1.2

1.1

0

(SWITCHING)

0

17.5

1.6

17.5

21.2

24.0

0

17.5

1.6

17.5

24.0

21.2

0

7.6

5.1

FL11.4SCM3

Power Supply 3 Schematic Diagram

10-6

CN4001 1GND 2KEY-IN1

EDZTE615.6B

D4001

SW4006

2.2K

R4007

2.2K

R4005

SW4005 SW4004

2.7K

R4004

4.7K

R4003

8.2K

R4002

18K

R4001

SW4003 SW4002 SW4001SW4007

CN4002 1GND 2KEY-IN1

OPEN

C4004

0.1

C4002

OPEN

D4002

2

1

ABC

FUNCTION CBA UNIT

POWER CH UP

CH DOWN

SOURCE

VOLUPVOL

DOWN

UNLESS OTHERWISE SPECIFIED: SWITCHES ARE SKRMABE010.

TO DIGITAL MAIN CBA UNIT CN3101

MENU

(NO CONNECTION)

2 REMOTE

CN4052

1 GND

7 LIGHT

6 KEY-IN1

5 LED1

4 P-ON+5V

3 AL+3.3V

R4052

6.8K

R4051 56

231

RS4051 GP1USC32XP

VOUT

GND

VCC

10

C405110C4056

1000P

C4052

1K

R4054

0.1

C4054

CN4051

1 GND 2 KEY-IN1

OPEN

C4055

1

2

34VCC

GND 5

NU

AMP

LOGIC

6

IC4051 OPEN

OPEN

C4057

R4055 OPEN

R4058 OPEN

R4059 OPEN

R4056 OPEN

R4057 OPEN

D4052 OPEN

D4051 19-21SURC /S530-A2/TR

R4060 OPEN

R4053

4.7K

0.1

C4053

IR SENSOR CBA UNIT

AB

2

C

1

TO DIGITAL MAIN CBA UNIT CN3102

(REMOTE SENSOR)

(LIGHT SENSOR)

STANDBY

(NO CONNECTION)

FL11.4SCF_IR

Function Schematic Diagram IR Sensor Schematic Diagram

10-7

7 GND

5 POL

9 LLV5(+)

10 LLV4(-)

CN3005

24 GND

20 LLV1(-)

2 XA0

20 LLV1(-)

8 LLV5(-)

13 LLV3(+)

17 GND

16 LLVCNK(+)

18 LLV2(-)

8 LLV5(-)

12 LLV3(-)

25 P-ON+3.3V

7 GND

27 VCOM-PWM

22 LLV0(-)

18 LLV2(-)

6TP

19 LLV2(+)

CN3006

30 LCD+21V

14 GND

1 STV

2 XA0

11 LLV4(+)

28 GND

17 GND

15 LLVCLK(-)

OPEN

C3045

26 PWR-CTRL

15 LLVCLK(-)

12 LLV3(-)

24 GND

22 LLV0(-)

21 LLV1(+)

1 STV

5 POL

23 LLV0(+)

19 LLV2(+)

11 LLV4(+)

21 LLV1(+)

23 LLV0(+)

29 LCD+21V

10 LLV4(-)

14 GND

3 OE1

16 LLVCNK(+)

4 CPV

3 OE1

13 LLV3(+)

6TP

4 CPV

9 LLV5(+)

100PC3161

47PC3164

47PC3162

47PC3163

47PC3165

100KR3041

1KR3152

29LCD+12V

23NU

6GND

20D0(+)

27GND

CN3011

31LCD+12V

17GND

10D3(+)

16D2(-)

18D1(+)

15D2(+)

25LCD+12V

12CK(+)

14GND

11D3(-)

4GND

5GND

22NU

8NU

13CK(-)

30LCD+12V

28GND

1NU

19D1(-)

26LCD+12V

24GND

7GND

2NU

21D0(-)

3NU

9NU

Q3002 OPEN

1

2

36

7

8

45

OPEN

C3061

OPEN

C3047

OPEN

R3025

OPEN

C3054

OPEN

R3021

OPEN

R3034

D3004 OPEN

Q3001 OPEN

OPEN

R3023

OPEN

R3022

OPEN

C3077

P-ON+24V

OPEN

R3038

OPEN

R3037

OPEN

R3026

OPEN

R3045

OPEN

R3044

Q3007 OPEN

OPEN

R3047

OPEN

R3048

VCOM-PWM

OPEN

R3046

OPEN

C3058

OPEN

C3057

OPEN

R3039

OPEN

R3027

T15

0.5PC3349

L16CPV

T14

0.5PC3353

7.5K

R3088

K15NU

N13NU

L13TP

M16NU

T13

P16

P13 N16

M13NU

0.5PC3355

L14OE2

0.5PC3350

P14

N14CELL-PWR-CTRL

M15POL

P15

0.5PC3351

R16

*1

IC3005(1/6) R8A05011BG-U0

R15

T16

M14STV

R14

R13

0.5PC3354

0.5PC3352

N15

L15OE

22

R3511

OPEN

R3028

OPEN

R3035

P-ON+3.3V

OE2

OPEN

C3751

OPEN

C3752

OPEN

C3753

CN3702

1 LCD+21V

3 GND 4 GND

2 LCD+21V

100KR3161

100KR3162

100KR3163

100KR3164

A

4

E

2

DCB

1

F

3

TO LCD MODULE ASSEMBLY

CONTINUE DIGITAL 4

DIGITAL SIGNAL PROCESS /MAIN MICRO CONTROLLER

TO DIGITAL MAIN 2 IC3005(2/6)

LVDS TX

DIGITAL MAIN CBA UNIT

(NO CONNECTION)

Digital Main 1 Schematic Diagram

FL11.4SCD1

The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section.

1 NOTE:

10-8

B12

D3040 1SS400

D3045 OPEN

P-ON+5V

D3049 OPEN

A10NU

D9NU

D3053 OPEN

4.7K

R3321

C8NU

0.1C3195

B9NU

75

R3364

10K

R3358

B11

75

R3377

A12

C10

B14VSIN

A16IF-AGC

D10NU

D8

A14HSIN

47

R3284

C9

A11NU

D3050 OPEN

C11

B10NU

A9

D3054 OPEN

P-ON+3.3V

47

R3285

100

R3343

C7

100

R3339

1

2

3

4514

13

12

11156

7

8

9

10

JK3001(REAR) PC-RGB-IN

1

2

34

VCC

GND

5

IC3013 74LVC1G126GW

47

R3286

10K

R3347

0.1C3196

100

R3376

1

2

34

VCC

GND

5

IC3014 74LVC1G126GW

75

R3356

D1NU

4.7K

R3326

D3055 OPEN

0.1C3194

JK3701(REAR)

75

R3701

39P

C3701

39P

C3702

75

R3702

75

R3703

39P

C3703

100K

R3705

100K

R3704

1

C3704

51K

R3706

1

C3705

51K

R3707

100P

C3711

100K

R3716

2.2K

R3718

Q3703 2SC4081UBTLQ

OPEN

R3720

D3041 OPEN

0.1C3201

0.01C3198

0.1C3200

0.1C3199

0.1C3286

0.1

C3197

0.1C32852.2

C3335

1C3336

AUDIO(L)-IN AUDIO(R)-IN

D3027 1SS400

2SC4081UBTLQ

Q3701

1

C3706

10K

R3712

JK3702(REAR)

0.1

C3708

7.5K

R3711

110

R3708

1

C3707

100

R3710

220

R3709

OPEN

C3715

COMP-DET

33PC3289

33PC3288

33PC3287

33PC3291

33PC3292

33PC3293

OPEN

R3361

L3024 OPEN

1K

R3194

OPEN

C3225

OPEN

R3360

L3023 OPEN

OPEN

C3177

OPEN

C3226

OPEN

C3242

OPEN

R3368

OPEN

C3243

2.7K

R3202

L3022 OPEN

OPEN

R3369

0.1

C3178

OPEN

C3235

18K

R3205

SDA T12

TU3401 TUNER UNIT

1

+3.3V2GND3SDA4SCL5IF-AGC6DIF-OUT17DIF-OUT2

L3401 BLM21PG221SN1D

10

C3401

0.1

C3407

10P

C3410

OPEN

C3408 D3401

EDZTE615.6B

OPEN

R3409

0.1

C3409

0.1C3402

0.1C3403

10P

C3411

1000P

C3404

OPEN

R3417

D3404 EDZTE615.6B

SCL R12

IC3005(2/6) R8A05011BG-U0

*1

22R3206 22R3207

OPEN

C3176

OPEN

C3175

4.7K

R3204

4.7K

R3203D3403

EDZTE615.6B

33P

C3406

D3402 EDZTE615.6B

33P

C3405

0.1

C3214

Q3702 2SC4081UBTLQ

OPEN

R3719

100K

R3714

2.2K

R3717

100P

C3710

SPDIF

100

R3296

100

R3298

0.1

C3713

75K

R3715

0.1

C3712

10R3327 10R3328 10R3329

PC-SCL

PC-SDA

PC+5V

L3701 BK1608HS601-T

10

C3714

OPEN

C3716

100P

C3709

HDMI-33V

75K

R3713

WF1

WF2

WF3

WF4

4

JI

3

2

L

1

GH K

DIGITAL MAIN CBA UNIT

DIGITAL SIGNAL PROCESS

TO DIGITAL MAIN 6 IC3005(6/6)

TO DIGITAL MAIN 1 IC3005(1/6)

TO DIGITAL MAIN 5 IC3005(5/6)

(BUFFER GATE)

CONTINUE DIGITAL 4

DIGITAL SIGNAL PROCESS /MAIN MICRO CONTROLLER

SW

A/D CONVERTER

DEMODULATOR /MPEG DECODER

AUDIO(L)-IN

AUDIO(R)-IN

COMPONENT

-Pr-IN

COMPONENT

-Pb-IN

COMPONENT

-Y/VIDEO-IN

DIGITAL AUDIO-OUT (COAXIAL)

4.3

(BUFFER)

9.2

3.8

CONTINUE DIGITAL 3

CONTINUE DIGITAL 5

CONTINUE DIGITAL 6

(BUFFER)

Digital Main 2 Schematic Diagram

FL11.4SCD2

The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section.

1 NOTE:

10-9

IC3002 K4T51163QI-HCF7

*A VDD

J2VREF

E2 NU

K2CKE J8CK K8CK L8CS K7RAS L7CAS K3WE L1BA2/NU L3BA1 L2BA0 R2A12 P7A11 M2A10/AP P3A9 P8A8 P2A7 N7A6 N3A5 N8A4 N2A3 M7A2 M3A1 M8A0 K9ODT

*BVSS

A2 NU R8 NU R7 NU R3 NU

B7 UDQS A8 UDQS/NU B3 UDM B9 DQ15 B1 DQ14 D9 DQ13 D1 DQ12 D3 DQ11 D7 DQ10 C2 DQ9 C8 DQ8 F7 LDQS E8 LDQS/NU F3 LDM F9 DQ7 F1 DQ6 H9 DQ5 H1 DQ4 H3 DQ3 H7 DQ2 G2 DQ1 G8 DQ0

N8 SD-DQ14 P7 SD-DQ13 R6 SD-DQ12 P6 SD-DQ11 N7 SD-DQ10 T5 SD-DQ9 P8 SD-DQ8 P4 SD-DQ7 T3 SD-DQ6 R4 SD-DQ5 T2 SD-DQ4 P3 SD-DQ3 T4 SD-DQ2 R3 SD-DQ1 N4 SD-DQ0 T6 SD-UDM R5 SD-LDM T7 SD-UDQSN R7 SD-UDQS N5 SD-LDQSN P5 SD-LDQS

J3 SD-RAS H3 SD-CAS

L4 SD-WE R1 SD-CLKN R2 SD-CLK L3 SD-CKE

K2 SD-ODT

M2 SD-A12

P1 SD-BA2

L1 SD-A1

H1 SD-A4

K1 SD-A2

H2 SD-A8

L2 SD-A9

N1 SD-A7

K4 SD-BA1

J2 SD-A11 K3 SD-A6

J1 SD-A0

M3 SD-A3

J4 SD-A10

N2 SD-BA0

M1 SD-A5

0.1

C3010

P-ON+5V

1

2

3

45

6

7

8

IC3006 MX25L3205DM2I-12G

CS

SO

WP

GND SI

SCK

NU

VCC

3USBDP 4GND

2USBDN

CN3009 1BUS-POWER

1

C3246

OPENC3029

0.1C3030 OPENC3031

0.1C3032 OPENC3033

0.1C3034 OPENC3035

0.1C3036 OPENC3037

0.1C3038 OPENC3039

0.1C3040 OPENC3041

P-ON+3.3V AL+3.3V

P-ON+1.8V

H4 NU

6.8R3024

6.8R3015 15R3016

100

R3049

2 UART0-TX

G16RXD0 3 UART0-RX

4.7KR3395

4 GND

4.7KR3396

G15TXD0

CN3010

1 P-ON+5V

10K

R3107

10K

R3102

L3025 EXC24CG900U

D3052 OPEN

E2BACKLIGHT-SW

22R3188

C1P-ON-H1

10K

R3503

BACKLIGHT-SW

P-ON-H1

IC3005(3/6) R8A05011BG-U0

*1

M5 SD-VREF0

R8 SD-DQ15

N3 GND

0.1

C3051

100

R3065

0.1

C3050

100

R3064

J16LED1 LED1

0.1

C3073

150R3070

4 ASEMD0 5 TRST-N 6 TCK

3 ASEBRKAK-N

9 TMS

8 TDO

7 TDI

G2NU

F15ASEBRKAK-N F16ASEMD0 E16TRST-N E15TCK D16TDI D15TDO E14TMS

E13GPY10 GPY10

G13AUDIO-MUTE

OPEN

R3234

22R3233

AUDIO-MUTE

F3BACKLIGHT-ADJ

100R3516

BACKLIGHT-ADJ

4.7KR3515

J14GND

H15XIN25 H16XOUT25

1K

R3223

X3001 25MHz

16P

C3184

16P

C3183

100R3468 100R3469

10K

R3522

1

2

34

5

IC3019 BD2224G-TR

VIN

GND

/EN /OC

VOUT

100/16V

C3348

10K

R3480

10K

R3479

0.1

C3327

L3041 BLM21PG221SN1D

0.1

C3009

15R3020

15R3029

15R3040

15R3050

R3033 15x4

R3032 15x4

R3031 15x4

R3030 15x4

G1NU

CN3012

AL+3.3V1

2 GND

10 CPU-RESET-N

F2VCOM-PWM

100R3517

VCOM-PWM

N12SFWP-N

22R3215 33K

R3201

COMP-DET

F13NU

K16DTV-ON-H1

K14DTV-ON-H2

100R3210

DTV-ON-H1

100R3514

DTV-ON-H2

P-ON-H2B16P-ON-H2

100R3211

22R3213

REMOTEC14REMOTE

CPU-RESET-N

T9 VBUS-EN

T11 SFCX

P10 NU

R10 USBDP

P12 SFCS-N

T10 USBDN

R9 VBUS-ST

R11 SFRX P11 SFTX

5.6KR3099

47R3093 47R3094

47R3092

22R3095

47R3089

H14NU

0.1C3071

10C3072

OPEN

C3253

BACKLIGHT-SW

DIGITAL MAIN CBA UNIT

DIGITAL SIGNAL PROCESS /MAIN MICRO CONTROLLER

(DDR2 SDRAM)

*B:A3,A7,B2,B8,D2,D8,E3,E7, F2,F8,H2,H8,J3,J7,N1,P9

*A:A1,A9,C1,C3,C7,C9,E1,E9, G1,G3,G7,G9,J1,J9,M9,R1

1-O3 2-O3 3-O3

4-O3 5-O3 6-O3

SD-DQ15 SD-DQ14 SD-DQ13 SD-DQ12 SD-DQ11 SD-DQ10 SD-DQ9 SD-DQ8

SD-DQ7 SD-DQ6 SD-DQ5 SD-DQ4 SD-DQ3 SD-DQ2 SD-DQ1 SD-DQ0

SD-DQ2

SD-DQ5

SD-DQ1

SD-DQ4

SD-DQ0

SD-DQ7

SD-DQ3

SD-DQ6

SD-DQ13

SD-DQ9

SD-DQ12

SD-DQ8

SD-DQ15

SD-DQ11

SD-DQ14

SD-DQ10

1-M3

2-M3

3-M3

4-M3

5-M3

6-M3

(MEMORY)

(USB JACK)

CONTINUE DIGITAL 4

2

MP

1

NO

3

4

QR

(NO CONNECTION)

CONTINUE DIGITAL 4

CONTINUE DIGITAL 2

(EEPROM)

CONTINUE DIGITAL 5

(NO CONNECTION)

CONTINUE DIGITAL 5

Digital Main 3 Schematic Diagram

FL11.4SCD3

The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section.

1 NOTE:

10-10

0.1

C3124

10

C3321

0.1

C3157

J5VCCQ18

OPEN

C3121

M4VCCQ18

OPEN

C3158

D6AVDD33

100

R3221

F12

IC3005(4/6) R8A05011BG-U0

*1

VCC33STB

F8AVDD12

0.1

C3148

0.1

C3160

L3016 BLM21PG221SN1D

0.1

C3150

0.1

C3123

M6VCCQ18

F9AVDD12

0.1

C3151

0.1

C3141

10

C3320

0.01

C3264

Q3013 SSM3K309T

G

DS

F5VCCQ33

C2AVDD33

J12VCCQ33

E10AVDD33

E8AVDD12

N11AVDD33

0.1

C3145

E12VDD12STB

10

C3114

10

C3134

10

C3343

G4VCCQ33

1

C3142

10

C3319

M7VCCQ18 M8VCCQ18

OPEN

C3326

*BVSS

1

C3149

OPEN

C3127

0.1

C3126

10

C3324

G12VCC33STB

T1VCCQ18

*AVDD12

0.1

C3143

H5VCCQ18

G11VDDCLK

1

C3140

E6AVDD33

0.1

C3136

0.1

C3147

1

C3137

0.1

C3128

0.1

C3182

E11AVDD33

OPEN

C3122

1

C3144

10

C3325

10

C3322

0.1

C3159

OPEN

C3125

OPEN

C3129

0.1

C3181

C3AVDD33

L3030 BEAD

10

C313210C3133

L3015 BLM21PG221SN1D

M10AVDD12

0.1

C3135

L3020 BLM21PG221SN1D

L3021 BLM21PG221SN1D

1

C31551C3156

L3028 BLM21PG221SN1D

0.1

C3139

N6VCCQ18

10

C3318

L3014 BLM21PG221SN1D

0.1

C3117

L3019 BLM21PG221SN1D

L3026 BLM21PG221SN1D

L3029 BEAD

0.1

C3152

0.1

C3154

L12VCCQ33 K13VCCQ33

L3027 MPZ1608S221AT

10K

R3222

L3001 BLM21PG221SN1D

12345

IC3004 BD7820FP-E2

CTL

VCC

GND

OUT

C

10

C3024

0.1

C3027

OPEN

C3023

20K

R3060

1K

R3059

C3108 100/16V

33K

R3061

C3049 100/4V 2.2

C326310C3086

12345

IC3007 BD7820FP-E2

CTL

VCC

GND

OUT

C

C3066 220/6.3V

4.7K

R3109

56K

R3110

42.2K

R3111

0.022

C3075

0.1

C3070

10

C3069

10

C3087

OPEN

C3068

L3003 BLM21PG221SN1D

10

C3076

Q3003 2SC4081UBTLQ

1

C3131

2.2K

R3086

2.2K

R3084

10K

R3077

Q3004 2SC4081UBTLQ

10K

R3079

Q3006 2SA1576UBUBTLQ

OPEN

R3464

22K

R3106

1K

R3105

Q3005 2SC4081UBTLQ

D3101 1SS400

D3102 1SS400

22K

R3100

0.015

C3088

6.8K

R3137

L3009 22uH

D3001 OPEN 10

C3097

1000P

C3091

0.015

C3083

10

R3141

0.1

C3085

10

C3096

8.2K

R3145

C3094 330/4V 300

R3149

1

C3090

EDZTE615.6B

D3006

10K

R3133

16K

R3143

1

2

3

45

6

7

8

IC3008 MP2303ADNLFZ

BST

VIN

SW

GND FB

COMP

EN

SS

OPEN

C3167

OPEN

C3166

4.7

C3080

4.7

C3103

0.1

C3082

1

C3081

OPEN

C3089

OPEN

R3056

C3067 330/4V

10K

R3134

10

C309910C3065

1

C3007

10

R3057

OPEN

C3168

0.1

C3012

0.047

C3013

EDZTE615.6B

D3005

10

C3060

0.015

C3017

1000P

C3092

C3020 220/6.3V

L3002 22uH

4.7

C3002

10

C3101

OPEN

R3058

D3002 OPEN 47K

R300410C3059

620

R3003

1

2

3

45

6

7

8

IC3001 MP2303ADNLFZ

BST

VIN

SW

GND FB

COMP

EN

SS

4.7

C3102

10

C3021

0.1

C3014

39K

R3001

OPEN

C3093

OPEN

C3169

15K

R3002

C3001 100/35V

D3103 1SS400

10

C3265

47K

R3423

Q3101 2SC4081UBTLQ

100

R3424

2.2K

R3097

D3106 1SS400

D3104 1SS400

D3105 OPEN

P-ON+5V

AL+3.3V

P-ON+24V

9OE2

6 P-ON-H1

16 P-ON+24V

12 GND

11 AL+5V

8 RESET

7 P-ON-H2

19 GND

17 P-ON+24V 18 GND

5 PROTECT1

13 AMP+24V

3 BACKLIGHT-ADJ

CN3701

1 VCOM-PWM

14 AMP+24V

4 PROTECT3

10 GND

2 BACKLIGHT-SW

15 GND

P-ON+3.3V

4.7

C3105

2.4K

R3007

C3053 220/6.3V

OPEN

R3055

L3005 22uH

1

2

3

45

6

7

8

IC3003 MP2303ADNLFZ

BST

VIN

SW

GND FB

COMP

EN

SS

4.7

C3022

0.1

C3042

10

C3104

OPEN

C3098

0.1

R3054

10K

R3006

10

C3056

OPEN

C3171

OPEN

C3170

0.1

C3026

0.047

C3028

6.8K

R3005

1

C3025

10

C3074D3003

OPEN

0.015

C3043

1000P

C3095

51K

R3012

123 54

IC3601 AKP2121AK

GNDCEVINNUVOUT

0.1

C3601 C3602

100/4V 1

C3603

P-ON+1.8V

P-ON+3.3V(1)

VCOM-PWM

BACKLIGHT-SW

BACKLIGHT-ADJ

PROTECT1

P-ON-H1

PROTECT3

RESET

1000PC3063

1000PC3062

1000PC3048

100PC3008

1000PC3004

1000PC3006

5.6KR3052

100PC3003

100R3051

100R3068

100R3013

100R3009

100R3011

100R3008

1000PC3055

0.1

C3016

10

C3015

0.1

C30441C30111C3046

1

C3138

0.1

C31461C3153

100

R3072

P-ON-H2

DTV-ON-H1

CPU-RESET-N

DTV-ON-H2

GPY10

EDZTE616.8B

D3007

OPEN

C311110C3112

10

C3109

OPEN

C3110

C3079 100/4V

AMP+24V

P-ON+3.3V AL+3.3V P-ON+5V

P-ON+5V

P-ON+3.3V

L3017 BLM21PG221SN1D

C3266 100/4V

0.022

C3019

1.8K

R3062

180

R3043

OPEN

R3042

1.8K

R3103

2.2

C3084

180

R3014

1000PC3064

VCOM-PWM OE2

100R3053

AL+3.3V

P-ON+3.3V

P-ON+3.3V(1)

EDZTE6115B

D3008

47K

R3018

Q3008 2SA1576UBTLQ

10K

R3019

Q3009 2SC4081UBTLQ

10K

R3010

1K

R3066

OPEN

C3018

47K

R3017

1K

R3067

2.2K

R3063

XU

4

1

3

2

WSVT

DIGITAL MAIN CBA UNIT

(SW+12V)

*A:G5,G6,H6,J7,J11,J13,K6,K7, K11,L8,L9,M9,N9,P9,M11.

DIGITAL SIGNAL PROCESS /MAIN MICRO CONTROLLER

*B:D2~D5,D12,E3~E5,E7,E9,F4,F6, F7,F10,F11,G7~G10,H7~H13,J6, J8~10,K5,K8~K10,K12,L5~L7, L10,L11,P2,T8

(+1.2V REG.)

(+1.8V REG.)

(SWITCHING)

(DC-DC CONVERTER) (DC-DC CONVERTER)

(SWITCHING)

TO POWER SUPPLY CBA CN632

(DC-DC CONVERTER)

(+3.3V REG.)

CONTINUE DIGITAL 3

CONTINUE DIGITAL 5

CONTINUE DIGITAL 1

CONTINUE DIGITAL 3

CONTINUE DIGITAL 2

CONTINUE DIGITAL 1

CONTINUE DIGITAL 6

(SWITCHING)

Digital Main 4 Schematic Diagram

FL11.4SCD4

The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section.

1 NOTE:

10-11

4P-ON+5V

6KEY-IN1

2REMOTE

7LIGHT

5LED1

CN3102 1GND

3AL+3.3V

2KEY-IN1

CN3101 1GND

AUDIO-MUTE

LED1

REMOTE

100

R3552

AL+3.3V P-ON+5V

100

R3551

2SC4081UBTLQ

Q3501

OPEN

R3555

100R3209

SPDIF

A8

B7

B8

A13 LIGHT-SENS C13 PROTECT1

A7

C12 LPF

A15 KEY-IN1

100R3313

22R3316

OPENR3315

10C3218

0.22C3231

10C3217

10KR3319

100

R3553

10KR3318

PROTECT3

CN3103 1P-ON+5V 2GND

OPEN

R3184

OPEN

R3186

OPEN

R3185

OPEN

Q3010OPEN

R3183

OPEN

C3558

OPEN

C3557

10KR3317

P-ON+3.3V(1)

AUDIO(R)-IN

AUDIO(L)-IN

100R3335

OPENR3499

1000PC3232

100R3336

1000PC3233

OPENR3500

1C3223

OPENC3221

OPENC3222

1C3224

1

C3804

1

C3805

100K

R3502

2200P

C3229

2.7K

R3325

AMP+24V

100K

R3501

2200P

C3227

2SC4081UBTLQ

Q3802

10K

R3811

CPU-RESET-NJ15CPU-RESET-N

100R3191

OPEN

D3111

0.01

C3120

OPEN

C3116

4.7K

R3182

32

14

IC3009 BU4221F

CDVDD

GND OUT

OPEN

C3252

0.033

C3113

10K

R3178

0.1

C3106

2.7K

R3322

RESET

PROTECT1

1SS400

D3107

1000P

C3552

0.1

C3554

1000P

C3559

100P

C3556

100P

C3553

1000P

C3555

EDZTE615.6B

D3108

1SS400

D3109

1SS400

D3110

10KR3312

D13 NU

B13 PROTECT3

22R3314

SP3801 SPEAKER L-CH

1000P

C3803

2 SP-GND

SP3802 SPEAKER R-CH

2 SP-GND

1000P

C3828

CN3802

1 SP(R)

CN3801

1 SP(L)

100/35V

C3806

100/35V

C3818

0.1

C3821

0.1

C3808

CRZ33

D3802

L3802 22uH

1000P

C3801

22

R3802

10

C3825

0.1

C3809

10

C3816

1000PC3323

100/35V

C3830

100/35V

C3819

0.1

C3807

0.1

C3822

L3801 22uH

CRZ33

D3801

1000P

C3802

22

R3803

0.1

C3810

0.1

C3817

33K

R3812

39K

R3805

100/35V

C3823

OPEN

C3829

100/35V

C3824

0.1

C3812

100/35V

C3826

0.1

C3811

OPEN

R3806

N10

IC3005(5/6)

*1

R8A05011BG-U0

27KR3809

OPEN

R3817

1C3813

10C3814

OPEN

R3823

OPEN

R3827

OPEN

R3825

OPEN

C3833

OPEN

Q3805

OPEN

R3824

OPEN

R3828

0.1

C3832

10K

R3810

100K

R3822

OPEN

R3808

10K

R3821

B6NU A6NU

D7NU C6NU

D11NU

C5NU

10C3220

10C3219

10KR3340

10C3216

Q3804 2SA1576UBTLQ

22K

R3820

10K

R3819

2SC4081UBTLQ

Q3803

22K

R3804

BACK LIGHT-SW

22K

R3818

10K

R3826

10C3815

OPEN

C3328

12345678910

11

12

13

14

15

16

17

18

19

20

21222324252627282930

31

32

33

34

35

36

37

38

39

40

GND GND

VDD

GND

PROT

VDD

PWM GENE.

GND

CONTROL LOGIC

HB2

GND

VDD

NU

GND

ROSC

VDD

GND

AVCC

PWM GENE.

GND

VREFF

DVDD1

GND

HB1

GND

CBIAS

IC3801 R2A15122FP

0

R3830

DIGITAL SIGNAL PROCESS /MAIN MICRO CONTROLLER

TO IR SENSOR CBA UNIT CN4052

TO FUNCTION CBA UNIT CN4001

CONTINUE DIGITAL 3

CONTINUE DIGITAL 4

(LED DRIVE)

TO DIGITAL MAIN 2 IC3005(2/6)

AUDIO I/F

TO DIGITAL MAIN 6 IC3005(6/6)

(SWITCHING)

CONTINUE DIGITAL 2

(AUDIO-MUTE)

(RESET)

4

3

2

1

YCCBBAAZDD

CONTINUE DIGITAL 2

CONTINUE DIGITAL 3

(NO CONNECTION)

CONTINUE DIGITAL 4

(AUDIO AMP)

DIGITAL MAIN CBA UNIT

(SWITCHING)

Digital Main 5 Schematic Diagram

FL11.4SCD5

The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section.

1 NOTE:

10-12

16 HDMI-DATA

14 NU

17 GND

13 HDMI-CEC

15 HDMI-CLOCK

10

C3316

L3046 BLM21PG221SN1D

P-ON+3.3V

AL+3.3V

Q3014 2SK3018T106

27K

R3237

A4

A3 B4

B1 A1

B3

B2 A2

14 NU

9 TMDS-D0(-)

10 TMDS-CLOCK(+)

3 TMDS-D2(-)

17 GND

11 C-SHIELD0

7 TMDS-D0(+)

2 D-SHIELD0

JK3003

1 TMDS-D2(+)

13 HDMI-CEC

8 D-SHIELD2

4 TMDS-D1(+)

6 TMDS-D1(-)

5 D-SHIELD1

12 TMDS-CLOCK(-)

15 HDMI-CLOCK 16 HDMI-DATA

47K

R3278

47K

R3275

47K

R3276

47K

R3273

D3057 RB751S-40

82K

R3415

VIDEO SIGNAL AUDIO SIGNAL

13

1

15

14

16

3

6

5

11

4

7

12

10

89

2

IC3011 BU9883FV-WE2

VCC1

SDA1

WPB

VCC-OUT

SDA0

SCL0

VCC0 VCC3

SCL3

SDA3

GND

NU

SDA2

SCL2

VCC2

SCL1

D14HDMI1-HPD

C15HDMI1-SDA

C16HDMI1-SCL

4.7K

R3487

0.1

C3191

4.7K

R3488

22

R3508

G3HDMI-SEL0

22

R3509

F1HDMI-SEL1

0.1

C3300

0.1

C3302

0.1

C3304

OPEN

C3301

OPEN

C3303

OPEN

C3307

OPEN

C3309

OPEN

C3305

0.1

C3308

0.1

C3306

4.64K

R3486

4.7K

R3497

0.1

C3190

0.1

C3212

0.1

C3213

0.1C3192

10K

R3523

100

R3282

100

R3281

4.7K

R3496

100

R3405

10K

R3489

B5PLL-XFC-A A5PLL-XFC-P

C4EXT-RES

2.2K

R3270

2.2

C3187

4700P

C3186

3K

R3271

2200P

C3188

18 +5V R3370 1K

R3371 OPEN

1

C3262

R3386 10K

1K

R3408

2SC4081UBTLQ

Q3030

OPEN

R3412

19 HOT PLUG DETECT

R3411

2.7K

D3067 1SS400

R3372 1K

R3373 OPEN

19 HOT PLUG DETECT

OPEN

R3413

2SC4081UBTLQ

Q3031

18 +5V

D3066 1SS400

33K

R3301

1K

R3407

M12PWR

10K

R3293

R3383 10K

R3410

2.7K1

C3261

HDMI-CEC B15

IC3005(6/6) R8A05011BG-U0

*1

10 TMDS-CLOCK(+)

JK3002

1 TMDS-D2(+)

8 D-SHIELD2

4 TMDS-D1(+)

3 TMDS-D2(-)

5 D-SHIELD1

12 TMDS-CLOCK(-)

7 TMDS-D0(+)

9 TMDS-D0(-)

2 D-SHIELD0

6 TMDS-D1(-)

11 C-SHIELD0

E1M32-TCK

22R3510

10K

R3302

PC-SCL

PC-SDA

PC+5V

0.01

C3185

560

R3236

P-ON+3.3V(1)

HDMI-33V

OPEN

C3272

G14HDMI-SCL

F14HDMI-SDA

4.7K

R3192

OPEN

C3271

4.7K

R3193

OPEN

C3313

OPEN

C3312

0.1

C3310

OPEN

C3311

0.1

C3314

OPEN

C3315

OPEN

C3334

0.1

C3331

OPEN

C3332

0.1

C3333

HDMI SW

IC3018 BU16029KV-E2

123

GND

4

56

VCC

789

GND

10

1112

VCC

131415

GND

16

NU

21

22 GND

23

24

25 VCC

26

27

28 GND

29 SCL-SINK

30 SDA-SINK

31

HOT-PLUGDETECT-SINK

32

HDMISEL0

33

HDMI-

SEL1

34NU35

HOT-PLUG-

DETECT1

36 37 38 39 40

VCC

41 42 43

GND

44 45 46

VCC

47 48

49NU

50

HOT-PLUGDETECT2

51

52

53

54

55VCC

56

57

58GND

59

60

61VCC

62

63

64

HOT-PLUGDETECT3

20

19 VCC

18

17

DIGITAL SIGNAL PROCESS /MAIN MICRO CONTROLLER

3

2

1

4

EE FF GG HH II JJ

CONTINUE DIGITAL 4

(BUFFER)

HDMI I/F

VIDEO DECODER

TO DIGITAL MAIN 5 IC3005(5/6)

TO DIGITAL MAIN 2 IC3005(2/6)

AUDIO DECODER

(HDMI SW)

DIGITAL MAIN CBA UNIT

HDMICONNECTOR-2

(HDMI SERIAL EEPROM)

HDMICONNECTOR-1

CONTINUE DIGITAL 2

(SWITCHING)

CONTINUE DIGITAL 2

Digital Main 6 Schematic Diagram

FL11.4SCD6

The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section.

1 NOTE:

10-13

1 2 3 4 5 6 7 8 9 10

TOOL NO.

C7A3 A3

BA17F1F0102 3

REPLACE FUSE AS MARKED

RISK OF FIRE-

E234498

A17F1MPW

J

GND

J1020

R211

J1021

IS5

VS2

J1022

J1023

GND

PROT5

J1024

LN1

J1025

J1026

VS6

HN1

J1027

C1700

VSEN

J1028

C1701

R601

LN1

J1029

R602

CN200

1

2

10

11

R605

R606

R607

R1103

R608

J1030

R609

INV-GND

J1031

C1709

R1106

J1032

PROT6

J1033

IS3

GND

J1034

D611A

D1301

PROT3

J1035

D611B

SW2

J1036

LN2

J1037

R610

HN2

J1038

R611

HN1J1039

R612

R613

R1305

D650B

PROT4

J1040

R1115

LN1

J1041

D631B

INV-GND

J1042

R233

VSEN

J1043

R234

CN600

R1118

GND

J1044

R235

STB

J1045

SW2

J1046

INV+24V

J1047

BL-SW

J1048

R239

J1049

GND

D1700

D1701

D1702

C203

D1703

R240

D1704

J1050

NH1

D1705

J1051

SW1

D632B

D1706

J1052

PROT2

R1127

D1707

ISEN

J1053

C208

R1704

VSEN

J1054

R245

J1055

NH1

R246

DC-12V

J1056

PROT

J1057

GND

J1058

R1709

DC-12V

J1059

R1130

R635

R636

C214

J1060

LN1

C215

J1061

REG-7.5V

D633B

J1062

PROT5

C217

GND

J1063

C600

DUTY

J1064

C219

R255

C601

FH601

GND

J1065

C602

R256

FH602

J1066

GND

R257

C603

PROT

J1067

R258

C604

GND

J1068

R259

GND

J1069

C607

C220

R1143

INV+24V

J1070

R649

R1145

DUTY

J1071

C226

R1146

GND

J1072

R263

C227

R1147

J1073

VLO

C228

C610

T1100

R1148

GND

J1074

R265

C229

C611

T1101

BL-ADJ

J1075

R266

CN632

1

2

18

19

C612

T1102

Q1202-B

J1076

J1077

C6

13

R268

24V

J1078

C614

PROTECT3

J1079

C230

R1150

D654B

R656

R657

R658

PANEL24V

J1080

R659

P-ON+24VJ1081

P-ON+24V

J1082

BL-ADJ

J1083

GND

J1084

J1085

P-ON-H2

J1086

GND

J1087

J1088

P-ON-H1

J1089

PROTECT1

R662

D655B

PANEL+15.8V

J1090

Q600-S

J1091

J1092

GND

J1093

P-ON-H1

GND

J1094

C631

J1095

C632

P-ON+24V

J1096

P-ON+24V

J1097

Q213-C

J1098

-7.5V

J1099

D210B

C637

C638

C639

D656B

C641

C644

C646

C647

D200

C648

D201

C649

D202

D205

D638B

D206

D207

D208

D210

D211

D212

D600

D601

D602

D603

D604

D605

D606

D607

D221

D609

D222

D610

START

D611

D612

D613

C675

IC601

T600

D631

D632

D633

D634

J200

VCOM2

D635

D636

D637

D638

D639

DRIVE

J1100

J1101

+36V

+17V

J1102

J1103

FB

AMP24V

J1104

D641

PROTECT1

J1105

J1106

+16V

GND

J1107

D644

AMP24V

J1108

D645

AMP24V

J1109

D646

C1206

D648

GND

J1110

PANEL15.8V

J1111

GND

J1112

P-ON+24V

J1113

JS200

OE2

D650

P-ON+24V

J1114

D651

PANEL-6V

J1115

D652

GND

J1116

GNDJ1117

D654

Q207-B

J1118

D655

GND

J1119

D656

D657

D658

D659

VCOM-PWM

J1120

PROTECT1

J1121

OVL

J1122

PANEL-6V

J1123

GND

J1124

J1125

PANEL+3.3V

GND

J1126

GND

J1127

D663

D1200

PROTECT3

J1128

D1201

GND

J1129

D1202

D1203

J1130

INV+24V

OVL

J1131

J1132

GND

PANEL+3.3V

J1133

GND

J1134

P-ON-H2

J1135

ALL5V

J1136ALL5V

J1137

PROTECT1

J1138

P-ON-H2

J1139

P-ON-H2

J1140

J1141

GND

J1142

ALL5V

J1143

J1144

GND

J1145

VCOM-PWM

J1146

BL-SW

J1147

BL-ADJ

J1148

INV+24V

J1149

J1150

REG-7.5V

J1151

PROT1

J1152 PROT3

J1153

PROT6

J1154

IS6

GND

J1155

GND

J1156

GND

J1157

GND

J1158

GND

J1159

D604B

J1161

IS1

J1162

PROT1

J1163

PROT4

J1164

IS4

J1165

INV+24V

J1166

INV+24V

J1167

INV+24V

J1168

INV+24V

J1169

GND

D605B

J1170

GND

J1171

GND

J1172

J1173

ALL5V

D606B

D1701B

JS660

SA601

D1703B

D1705B

Q600

Q601

Q221

Q222

JS1200

PROT

L600

L601

D1707B

BC601

D205B

D1300B

BC602

CN1100

CN1101

D1301B

CN1102

Q636

GND

J1001

GND

J1002

SW2J1003

SW2

J1004

SW2

J1005

SW2

J1006

SW2

J1007

C1104

SW2

J1008

J1009

IS2

C1106

C1108

SW2

J1010

SW2

J1011

C1302

PROT1J1012

R203

J1013

IS3

C1110

C1304

PROT3

J1014

PROT4J1015

C1112

PROT6

J1016

J1017

IS4

C1114

IS1J1018

R209

J1019

2

3

4

BC D E

F

HOT

COLD

HOT

1

A

F601 4A/125V

CN601

JS656

for D656A

D1300

BA17F1F01023

Power Supply CBA Top View [TYPE A]

Because a hot chassis ground is present in the power supply circuit, an isolation transformer must be used when repairing. Also, in order to have the ability to increase the input slowly, when troubleshooting this type of power supply circuit, a variable isolation transformer is required.

NOTE:

The voltage for parts in hot circuit is measured using hot GND as a common terminal.

CAUTION !

Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F601) is blown , check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail.

For continued protection against risk of fire, replace only with same type 4 A, 125V fuse.

CAUTION ! :

ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V.

4A/125V

10-14

GND

J1020

R211

J1021

IS5

VS2

J1022

J1023

GND

PROT5

J1024

LN1

J1025

J1026

VS6

HN1

J1027

C1700

VSEN

J1028

C1701

R601

LN1

J1029

R602

CN200

1

2

10

11

R605

R606

R607

R1103

R608

J1030

R609

INV-GND

J1031

C1709

R1106

J1032

PROT6

J1033IS3

GND

J1034

D611A

D1301

PROT3

J1035

D611B

SW2

J1036

LN2

J1037

R610

HN2

J1038

R611

HN1

R612

R613

R1305

D650B

PROT4

J1040

J1039

R1115

LN1

J1041

D631B

INV-GND

J1042

R233

VSEN

J1043

R234

CN600

R1118

GND

J1044

R235

STB

J1045

SW2

J1046

INV+24V

J1047

BL-SW

J1048

R239

J1049

GND

D1700

D1701

D1702

C203

D1703

R240

D1704

J1050

NH1

D1705

J1051

SW1

D632B

D1706

J1052

PROT2

R1127

D1707

ISEN

J1053

C208

R1704

VSEN

J1054

R245

J1055

NH1

R246

DC-12V

J1056

PROT

J1057

GND

J1058

R1709

DC-12V

R1130

R635

R636

C214

J1060

LN1

C215

J1061

REG-7.5V

D633B

J1062

PROT5

C217

GND

J1063

C600

DUTY

J1064

J1059

C219

R255

C601

FH601

GND

J1065

C602

R256

FH602

J1066

GND

R257

C603

PROT

J1067

R258

C604

GND

J1068

R259

GND

J1069

C607

C220

R1143

INV+24V

J1070

R649

R1145

DUTY

J1071

C226

R1146

GND

J1072

R263

C227

R1147

J1073

VLO

C228

C610

T1100

R1148

GND

J1074

R265

C229

C611

T1101

BL-ADJ

J1075

R266

CN632

1

2

18

19

C612

T1102

Q1202-B

J1076

J1077START

C613

R268

24V

J1078

C614

PROTECT3

J1079

C230

R1150

D654B

R656

R657

R658

PANEL24V

J1080

R659

P-ON+24V

J1082

J1081

BL-ADJ

J1083

GND

J1084

J1085P-ON-H2

J1086

GND

J1087

J1088

P-ON-H1

J1089

PROTECT1

R662

D655B

PANEL+15.8V

J1090

Q600-S

J1091

J1092

GND

J1093

P-ON-H1

GND

J1094

C631

J1095

C632

P-ON+24V

J1096

P-ON+24V

J1097

Q213-C

J1098

-7.5V

J1099

D210B

C637

C638

C639

D656B

C641

C644

C646

C647

D200

C648

D201

C649

D202

D205

D638B

D206

D207

D208

D210

D211

D212

D600

D601

D602

D603

D604

D605

D606

D607

D221

D609

D222

D610

D611

D612

D613

C675

IC601

T600

D631

D632

D633

D634

J200

VCOM2

D635

D636

D637

D638

D639

DRIVE

J1100

J1101

+36V

+17V

J1102

J1103

FB

AMP24V

J1104

D641

PROTECT1

J1105

J1106

+16V

GND

J1107

D644

AMP24V

J1108

D645

AMP24V

J1109

D646

C1206

D648

GND

J1110

PANEL15.8V

J1111

GND

J1112

P-ON+24V

J1113

JS200

OE2

D650

P-ON+24V

J1114

D651

PANEL-6V

J1115

D652

GND

J1116

J1117

GND

D654

Q207-B

J1118

D655

GND

J1119

D656

D657

D658

D659

VCOM-PWM

J1120

PROTECT1

J1121

OVL

J1122

PANEL-6V

GND

J1124

J1125

J1123

PANEL+3.3V

GND

J1126

GND

J1127

D663

D1200

PROTECT3

J1128

D1201

GND

J1129

D1202

D1203

J1130

INV+24V

OVL

J1131

J1132

GND

PANEL+3.3V

J1133

GND

J1134

P-ON-H2

J1135

ALL5V

ALL5VJ1136

J1137

PROTECT1

J1138

P-ON-H2

J1139

P-ON-H2

J1140

J1141GND

GND

J1142

ALL5V

J1143

J1144

GND

J1145

VCOM-PWM

J1146

BL-SW

J1147

BL-ADJ

J1148

INV+24V

J1149

J1150

REG-7.5V

J1151

PROT1

J1152PROT3

J1153

PROT6

J1154

IS6

GND

J1155

GND

J1156

GND

J1157

GND

J1158

GND

J1159

D604B

J1161

IS1

J1162

PROT1

J1163

PROT4

J1164

IS4

J1165

INV+24V

J1166

INV+24V

J1167

INV+24V

J1168

INV+24V

J1169

GND

D605B

J1170

GND

J1171

GND

J1172

J1173

ALL5V

D606B

D1701B

JS660

SA601

D1703B

D1705B

Q600

Q601

Q221

Q222

JS1200

PROT

L600

L601

D1707B

BC601

D205B

D1300B

BC602

CN1100

CN1101

D1301B

CN1102

Q636

GND

J1001

GND

J1002

SW2

J1004

J1003

SW2

J1005

SW2

J1006

SW2

J1007

C1104

SW2

J1008

J1009

IS2

C1106

C1108

SW2

J1010

SW2

J1011

C1302

PROT1

R203

J1013

IS3

C1110

C1304

PROT3

J1014

PROT4

C1112

PROT6

J1016

J1017

J1015

IS4

C1114

IS1

R209

J1019

2

3

4

BCDE

F

HOT

COLD

HOT

1

A

F601

4A/125V

CN601

JS656

for D656A

D1300

C1118

J1018

J1012

C1500

C1119

C1501

C1502

R210

C1311

R212

R213

C1120

R214

C1121

R215

C1122

R216

C1123

R217

R218

R600

R219

C1702

R603

C1703

C1704

R604

Q1700

R1100

C1705

Q1701

R1101

C1706

Q1702

R1102

C1707

Q1703

R220

C1708

R1104

R221

R1105

R222

R223

R1107

R224

R1108

R225

R1109

R226

R227

R228

R1300

C1710

R229

R1301

R1302

R1303

R1304

R1110

D650A

R1111

R1306

R1112

R1307

R1113

R230

R1308

D1500

R1114

D631A

R231

R1309

D1501

R232

D1502

R1116

D1503

R1117

D1504

R1500

D1505

R1501

R1119

R236

D1506

R1502

R237

D1507

R1503

R238

R1310

D1508

R1504

R1505

R1506

R1507

R1508

C200

R1120

R1509

C201

R1121

C202

R1122

R1123

R1124

C204

R1700

D632A

R241

R1125

C205

R1701

R242

R1126

C206

R1702

R243

C207

R1703

R244

R1128

R1510

R1129

R1511

C209

R1705

R1512

R1706

R247

R1513

R1707

R248

R1514

R1708

R1515

R249

R631

R632

R1516

C210

R1131

C211

R1132

C212

R637

R1133

C213

R638

R1134

D633A

R251

R1135

R252

C216

R253

R254

C218

R641

C605

R642

C606

R643

R644

C608

R645

C221

C609

C222

R647

C223

R260

C224

R261

C225

R262

R264

R267

R650

R269

R651

R652

R654

D654A

R655

C231

R270

D635A

R271

R272

R273

R274

R275

R276

R663

R664

D655A

C633

C634

D210A

C635

C636

D656A

C645

D638A

IC200

1

4

5

8

IC202

D640

C1200

C1201

D642

C1202

D643

C1203

C1204

C1205

Q1201

Q1202

C1207

Q1203

C1208

Q1204

D649

C1209

C1210

C1211

C1212

C1213

C1214

D660

D661

D662

R1200

R1201

R1202

R1203

R1204

R1205

R1206

R1207

IC1200

1

12

13

24

R1208

R1209

R1212

R1213

R1214

R1215

R1216

R1220

R1221

R1222

R1223

R1225

R1226

R1227

R1228

R1229

D604A

D605A

D606A

D1701A

D1703A

Q200

Q201

Q202

Q203

Q204

Q205

Q206

Q207

Q208

Q210

Q211

Q212

Q213

Q214

D1705A

Q215

Q216

D1707A

D205A

D1300A

D1301A

Q631

Q632

Q633

Q634

Q635

C1100

C1101

C1102

C1103

C1105

C1107

C1109

C1300

R200

C1301

R201

R202

C1303

R204

Q1300

C1305

R205

Q1301

C1111

R206

R207

Q1303

C1113

R208

C1115

C1116

C1117

D648A

D610A

D645A

H.V. CAUTION

BA17F1F0102 3

Power Supply CBA Bottom View [TYPE A]

BA17F1F01023

Because a hot chassis ground is present in the power supply circuit, an isolation transformer must be used when repairing. Also, in order to have the ability to increase the input slowly, when troubleshooting this type of power supply circuit, a variable isolation transformer is required.

NOTE:

The voltage for parts in hot circuit is measured using hot GND as a common terminal.

CAUTION !

Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F601) is blown , check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail.

For continued protection against risk of fire, replace only with same type 4 A, 125V fuse.

CAUTION ! :

ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V.

4A/125V

10-15

1 2 3 4 5 6 7 8 9 10

TOOL NO.

C7A3 A3

BA17F8F0102 2

REPLACE FUSE AS MARKED

RISK OF FIRE-

A17F8MPW

T

E234498

2

3

4

BC D E

F

HOT

COLD

HOT

1

A

F601 4A/125V

GND

J1020

R211

J1021

IS5

VS2

J1022

J1023

GND

PROT5

J1024

LN1

J1025

J1026

VS6

HN1

J1027

C1700

VSEN

J1028

C1701

R601

LN1

J1029

R602

R605

R606

R607

R1103

R608

J1030

R609

INV-GND

J1031

C1709

R1106

J1032

PROT6

J1033

D1300

GND

J1034

D1301

PROT3

J1035

SW2

J1036

LN2

J1037

R610

HN2

J1038

R611

HN1J1039

R612

R613

R1305

PROT4

J1040

R1115

LN1

J1041

INV-GND

J1042

R233

VSEN

J1043

R234

CN600

R1118

GND

J1044

R235

STB

J1045

SW2

J1046

INV+24V

J1047

BL-SW

J1048

R239

J1049

GND

D1700

D1701

D1702

D1703

R240

D1704

J1050

NH1

D1705

J1051

SW1

D1706

J1052

PROT2

R1127

D1707

ISEN

J1053

R1704

VSEN

J1054

R245

J1055

NH1

R246

DC-12V

J1056

J1057

PROT

GND

J1058

R1709

DC-12V

J1059

R633

R634

R1130

R635

R636

J1060

LN1

J1061

REG-7.5V

J1062

PROT5

GND

J1063

C600

DUTY

J1064

R255

C601

FH601

GND

J1065

R256

FH602

J1066

GND

R257

C603

PROT

J1067

R258

C604

GND

J1068

R259

GND

J1069

C607

R1143

INV+24V

J1070

R649

R1145

DUTY

J1071

R1146

GND

J1072

R263

R1147

J1073

VLO

C610

R1148

GND

J1074

R265

C611

BL-ADJ

J1075

R266

C612

Q1202-B

J1076

J1077 START

C613

R268

24V

J1078

C614

PROTECT3

J1079

R1150

R656

R657

R658

PANEL24V

J1080

R659

P-ON+24VJ1081

P-ON+24V

J1082

BL-ADJ

J1083

GND

J1084

J1085

P-ON-H2

J1086

GND

J1087

R660

J1088

P-ON-H1

J1089

PROTECT1

R662

PANEL+15.8V

J1090

Q600-S

J1091

J1092

GND

J1093

P-ON-H1

GND

J1094

J1095

P-ON+24V

J1096

P-ON+24V

J1097

Q213-C

J1098

-7.5V

J1099

C641

D200

C648

D201

C649

D202

D205

D206

D207

D208

D210

D211

D212

D600

D601

D602

D603

D604

D605

D606

D607

D221

D609

D222

D610

D611

D612

D613

IC601

T600

D631

D632

D633

D634

J200

VCOM2

D635

D636

D637

D638

D639

DRIVE

J1100

J1101

+36V

+17V

J1102

J1103

FB

AMP24V

J1104

D641

J1106

+16V

GND

J1107

D644

AMP24V

J1108

D645

AMP24V

J1109

D646

D648

GND

J1110

PANEL15.8V

J1111

GND

J1112

P-ON+24V

J1113

JS200

OE2

D650

P-ON+24V

J1114

D651

PANEL-6V

J1115

D652

GND

J1116

GNDJ1117

D654

Q207-B

J1118

D655

GND

J1119

D656

D657

D658

D659

VCOM-PWM

J1120

PROTECT1J1121

OVL

J1122

PANEL-6V

J1123

GND

J1124

PANEL+3.3V

J1125

GND

J1126

GND

J1127

D663

D1200

PROTECT3

J1128

D1201

GND

J1129

D1202

D1203

J1130

INV+24V

OVL

J1131

J1132

GND

PANEL+3.3V

J1133

GND

J1134

P-ON-H2

J1135

ALL5V

J1136

ALL5V

J1137

PROTECT1

J1138

P-ON-H2

J1139

P-ON-H2

J1140

J1141

GND

J1142

ALL5V

J1143

J1144

GND

J1145

VCOM-PWM

J1146

BL-SW

J1147

BL-ADJ

J1148

INV+24V

J1149

J1150

REG-7.5V

J1151

PROT1

J1152

J1153

PROT6

J1154

IS6

GND

J1155

GND

J1156

GND

J1157

GND

J1158

GND

J1159

J1161

IS1

J1162

PROT1

J1163

PROT4

J1164

IS4

J1165

INV+24V

J1166

INV+24V

J1167

INV+24V

J1168

INV+24V

J1169

GND

J1170

GND

J1171

GND

JS660

SA601

Q600

Q601

Q221

Q222

JS1200

PROT

L600

L601

BC601

BC602

Q636

GND

J1001

GND

J1002

SW2J1003

SW2

J1004

IS3

PROT3

SW2

J1005

SW2

J1006

SW2

J1007

C1104

SW2

J1008

J1009

IS2

C1106

C1108

SW2

J1010

SW2

J1011

PROT1J1012

R203

J1013

IS3

C1110

PROT3

J1014

PROT4J1015

C1112

PROT6

J1016

J1017

IS4

C1114

IS1J1018

R209

J1019

C203

C208

C214

C215

C217

C226

C227

C228

C229

C230

C639

C644

C646

C675

C1206

C1302

C638

C647

C1304

C220

C637

C631

C632

PROTECT1

J1105

CN601

CN200

1

2

10

11

CN632

1

2

18

19

C602

CN1100

CN1101

CN1102

T1100

T1101

T1102

BA17F8F01022

Power Supply CBA Top View [TYPE B]

Because a hot chassis ground is present in the power supply circuit, an isolation transformer must be used when repairing. Also, in order to have the ability to increase the input slowly, when troubleshooting this type of power supply circuit, a variable isolation transformer is required.

NOTE:

The voltage for parts in hot circuit is measured using hot GND as a common terminal.

CAUTION !

Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F601) is blown , check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail.

For continued protection against risk of fire, replace only with same type 4 A, 125V fuse.

CAUTION ! :

ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V.

4A/125V

10-16

2

3

4

BCDE

F

HOT

COLD

HOT

1

A

F601

4A/125V

GND

J1020

R211

J1021

IS5

VS2

J1022

J1023

GND

PROT5

J1024

LN1

J1025

J1026

VS6

HN1

J1027

C1700

VSEN

J1028

C1701

R601

LN1

J1029

R602

R605

R606

R607

R1103

R608

J1030

R609

INV-GND

J1031

C1709

R1106

J1032 PROT6

J1033IS3

D1300

GND

J1034

D1301

PROT3

J1035

SW2

J1036

LN2

J1037

R610

HN2

J1038

R611

HN1

R612

R613

R1305

PROT4

J1040

J1039

R1115

LN1

J1041

INV-GND

J1042

R233

VSEN

J1043

R234

CN600

R1118

GND

J1044

R235

STB

J1045

SW2

J1046

INV+24V

J1047

BL-SW

J1048

R239

J1049

GND

D1700

D1701

D1702

D1703

R240

D1704

J1050

NH1

D1705

J1051

SW1

D1706

J1052

PROT2

R1127

D1707

ISEN

J1053

R1704

VSEN

J1054

R245

J1055

NH1

R246

DC-12V

J1056

J1057

PROT

GND

J1058

R1709

DC-12V

R633

R634

R1130

R635

R636

J1060

LN1

J1061

REG-7.5V

J1062

PROT5

GND

J1063

C600

DUTY

J1064

R255

C601

FH601

GND

J1065

R256

FH602

J1066

GND

R257

C603

PROT

J1067

R258

C604

GND

J1068

R259

GND

J1069

C607

R1143

INV+24V

J1070

R649

R1145

DUTY

J1071

R1146

GND

J1072

R263

R1147

J1073

VLO

C610

R1148

GND

J1074

R265

C611

BL-ADJ

J1075

R266

C612

Q1202-B

J1076

J1077START

C61

3

R268

J1121

24V

J1078

C614

PROTECT3

J1079

R1150

R656

R657

R658

PANEL24V

J1080

R659

P-ON+24V

J1082

J1081

BL-ADJ

J1083

GND

J1084

J1085P-ON-H2

J1086

GND

J1087

R660

J1088

P-ON-H1

J1089

PROTECT1

R662

PANEL+15.8V

J1090

Q600-S

J1091

J1092

GND

J1093

P-ON-H1

GND

J1094

J1095

P-ON+24V

J1096

P-ON+24V

J1097

Q213-C

J1098

-7.5V

J1099

C641

D200

C648

D201

C649

D202

D205

D206

D207

D208

D210

D211

D212

D600

D601

D602

D603

D604

D605

D606

D607

D221

D609

D222

D610

D611

D612

D613

IC601

T600

D631

D632

D633

D634

J200

VCOM2

D635

D636

D637

D638

D639

DRIVE

J1100

J1101

+36V

+17V

J1102

J1103

FB

AMP24V

J1104

D641

J1106

+16V

GND

J1107

D644

AMP24V

J1108

D645

AMP24V

J1109

D646

D648

GND

J1110

PANEL15.8V

J1111

J1125

J1123

GND

J1112

P-ON+24V

J1113

JS200

OE2

D650

P-ON+24V

J1114

D651

PANEL-6V

J1115

D652

GND

J1116

J1117

GND

D654

Q207-B

J1118

D655

GND

J1119

D656

D657

D658

D659

VCOM-PWM

J1120

PROTECT1

OVL

J1122

PANEL-6V

GND

J1124

PANEL+3.3V

GND

J1126

GND

J1127

D663

D1200

PROTECT3

J1128

D1201

GND

J1129

D1202

D1203

J1130

INV+24V

OVL

J1131

J1132

GND

PANEL+3.3V

J1133

GND

J1134

P-ON-H2

J1135

ALL5V

J1136

ALL5V

J1137

PROTECT1

J1138

P-ON-H2

J1139

P-ON-H2

J1140

J1141GND

GND

J1142

ALL5V

J1143

J1144

GND

J1145

VCOM-PWM

J1146

BL-SW

J1147

BL-ADJ

J1148

INV+24V

J1149

J1150

REG-7.5V

J1151

PROT1

J1152PROT3

J1153

PROT6

J1154

IS6

GND

J1155

GND

J1156

GND

J1157

GND

J1158

GND

J1159

J1161

J1012

J1018

IS1

J1162

PROT1

J1163

PROT4

J1164

IS4

J1165

INV+24V

J1166

INV+24V

J1167

INV+24V

J1168

INV+24V

J1169 GND

J1170

GND

J1171

GND

JS660

SA601

Q600

Q601

Q221

Q222

JS1200

PROT

L600

L601

BC601

BC602

Q636

GND

J1001

GND

J1002

SW2

J1004

J1003

SW2

J1005

SW2

J1006

SW2

J1007

C1104

SW2

J1008

J1009

IS2

C1106

C1108

SW2

J1010

SW2

J1011

PROT1

R203

J1013

IS3

C1110

PROT3

J1014

PROT4

C1112

PROT6

J1016

J1017

J1015

IS4

C1114

IS1

R209

J1019

C203

C208

C214

C215

C217

C226

C227

C228

C229

C230

C639

C644

C646

C675

C1206

J1059

C1302

C638

C647

C1304

C220

C637

C631

C632

PROTECT1

J1105

CN601

CN200

1

2

10

11

CN632

1

2

18

19

C602

CN1100

CN1101

CN1102

T1100

T1101

T1102

C1118

C1500

C1119

C1501

C1502

R210

C1311

R212

R213

C1120

R214

C1121

R215

C1122

R216

C1123

R217

R218

R600

R219

C1702

R603

C1703

C1704

R604

R1100

C1705

R1101

C1706

R1102

C1707

R220

C1708

R1104

R221

R1105

R222

R223

R1107

R224

R1108

R225

R1109

R226

R227

R228

R1300

C1710

R229

R1301

R1302

R1303

R1304

R1110

R1111

R1306

R1112

R1307

R1113

R230

R1308

R1114

R231

R1309

R232

R1116

R1117

R1500

R1501

R1119

R236

R1502

R237

R1503

R238

R1310

R1504

R1505

R1506

R1507

R1508

C200

R1120

R1509

C201

R1121

C202

R1122

R1123

R1124

C204

R1700

R241

R1125

C205

R1701

R242

R1126

C206

R1702

R243

C207

R1703

R244

R1128

R1510

R1129

R1511

C209

R1705

R1512

R1706

R247

R1513

R1707

R248

R1514

R1708

R1515

R249

R631

R632

R1516

C210

R1131

C211

R1132

C212

R637

R1133

C213

R638

R1134

R251

R1135

R252

C216

R253

R254

C218

R641

C605

R642

C606

R643

R644

C608

R645

C221

C609

C222

R647

C223

R260

C224

R261

C225

R262

R264

R267

R650

R269

R651

R652

R654

R655

C231

R270

R663

R664

C633

C634

C635

C636

C645

C1200

C1201

C1202

C1203

C1204

C1205

Q1201

Q1202

C1207

C1208

Q1204

C1209

C1210

C1211

C1212

C1213

C1214

R1200

R1201

R1202

R1203

R1204

R1205

R1206

R1207

R1208

R1209

R1212

R1213

R1214

R1215

R1216

R1220

R1221

R1222

R1223

R1225

R1226

R1227

R1228

R1229

Q201

Q202

Q204

Q205

Q206

Q208

Q211

Q212

Q213

Q214

Q631

Q632

Q633

Q634

Q635

C1100

C1101

C1102

C1103

C1105

C1107

C1109

C1300

R200

C1301

R201

R202

C1303

R204

C1305

R205

Q1301

C1111

R206

R207

C1113

R208

C1115

C1116

C1117

IC202

D640

Q1701Q1700

3071Q2071Q

IC200

1

4

5

8

D642

D643

D649

D660

D661

D662

IC1200

1

12

13

24

D1506

D1503

D1504

D1507

D1505

D1508

Q1300

Q1303

D1500

D1501

D1502

Q1203

Q210

Q200

Q203

Q207

H.V. CAUTION

BA17F8F0102 2

BA17F8F01022

Because a hot chassis ground is present in the power supply circuit, an isolation transformer must be used when repairing. Also, in order to have the ability to increase the input slowly, when troubleshooting this type of power supply circuit, a variable isolation transformer is required.

Power Supply CBA Bottom View [TYPE B]

NOTE:

The voltage for parts in hot circuit is measured using hot GND as a common terminal.

CAUTION !

Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F601) is blown , check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail.

For continued protection against risk of fire, replace only with same type 4 A, 125V fuse.

CAUTION ! :

ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V.

4A/125V

WAVEFORMS

WF1 ~ WF4 = Waveforms to be observed at

Waveform check points. (Shown in Schematic Diagram.)

Input: Component Color Bar Signal (480i, 480p, 720p or 1080i) (with 1kHz Audio Signal)

WF1

WF2

JK3701(Y-IN)

VIDEO-Y 0.2V 20µs

JK3701(Pb-IN)

VIDEO-Pb 0.2V 20µs

WF3

JK3701(Pr-IN)

VIDEO-Pr 0.2V 20µs

JK3701(AUDIO(L)-IN)

WF4

AUDIO 0.1V 0.5ms

FL11.4WF11-1

HDMI-

CONNECTOR-1

WIRING DIAGRAM

HDMI-

CONNECTOR-2

PC-RGB-IN

USB JACK

DIGITAL MAIN CBA UNIT

CN3005

1

STV

CL3005

CN1100

BACK

1

2

XAO

3

OE1

LIGHT

2

4

CPV

POL

7

6TP5

GND

BACK

1

CN1101

8

LLV5(-)

LIGHT

2

9

LLV5(+)

10

LLV4(-)

12

11

LLV3(-)

LLV4(+)

BACK

1

CN1102

13

LLV3(+)

LIGHT

2

14

GND

16

15

LLVCLK(-)

LLVCLK(+)

CL200

GND

1

CN200

18

17

GND

LLV2(-)

LCD+15.8V

2

20

19

LLV1(-)

LLN2(+)

GND4VGH3LCD+15.8V

5

23

22

21

LLV0(-)

LLV0(+)

LLV1(+)

P-ON+3.3V

7

6

24

GND

GND8LCD-6V

9

LCD MODULE

GND10VCOM

11

ASSEMBLY

AC600

AC CORD

2

1

CN600

CN601

*1

*2

32MF301B/F7 (Serial No.: DS1),

LC320SS2 (Serial No.: DS1)

LC320EM2F (Serial No.: DS1, DS2, DS3, DS4),

32MF301B/F7 (Serial No.: DS2, DS3, DS4, DS6, ME1, ME3, TH1),

LC320SS2 (Serial No.: DS2, DS3, ME1, TH1)

CLC320EM2F (Serial No.: DS1)

*1 LC320EM2 (Serial No.: DS1),

*2 LC320EM2 (Serial No.: DS2, DS3, DS4, DS5, DS6, DS7, ME1, ME3, TH1),

POWER SUPPLY CBA

SP3801

SPEAKER

5

8

4

6

7

2

3

1

9

11

10

16

12

15

13

14

17

18

19

L-CH

SP3802

SPEAKER

R-CH

TUNER UNIT

COMPONENT

-Y/VIDEO-IN

COMPONENT

-Pb-IN

CL632

BACKLIGHT-SW

BACKLIGHT-ADJ

VCOM-PWM

2

3

1

CN3701 CN632

COMPONENT

-Pr-IN

PROTECT1

PROTECT3

P-ON-H1

5

6

4

AUDIO(L)-IN

AUDIO(R)-IN

RESET

P-ON-H2

8

7

AL+5V

GND

OE2

9

11

10

DIGITAL

AUDIO-OUT

(COAXIAL)

GND

12

GND

AMP+24V

15

13

14

P-ON+24V

GND

16

17

18

GND

19

1

CN3102

CL3102

GND

1

CN4052

2

REMOTE

2

3

4

AL+3.3V

P-ON+5V

3

4

5

LED1

5

6

KEY-IN1

6

7

LIGHT

7

IR SENSOR CBA UNIT

1

SP(L)

CN3801

CL3801

2

SP-GND

1

CN3101

CL3101

GND

1

CN4001

CN3802

2

KEY-IN1

2

CL3802

1

SP(R)

2

SP-GND

FUNCTION CBA UNIT

FL11.4AWI12-1

13-1 FL11.4-A_CEX

EXPLODED VIEWS

Cabinet [TYPE A] 32MF301B/F7 (Serial No.: DS1, DS2), LC320EM2 (Serial No.: DS1, DS3), LC320SS2 (Serial No.: DS1, DS2)

LC320EM2 (Serial No.:DS1), 32MF301B/F7 (Serial No.:DS1), LC320SS2 (Serial No.:DS1)

See Electrical Parts List for parts with this mark.

Digital Main CBA Unit

Function CBA Unit

IR Sensor CBA Unit

Power Supply CBA

Stand Assembly

L17

B41

LCD1

A1

A4

A8

A11

A12

B11

SP3801

CL200

SP3802

CL3801

CL3802

B5

AC600

B18

L25

L15

L14

L1

CL632

L14

A2

B22

L27

L28

L27

L25

L27

X7

S6

L1

A15

B72

CL3101

CL3102

CL3005

B11

S6

L1

S6

B63

B67

B64

B66

B67

B64

B66

B27

B66

A42

13-2 FL11.4-A_CEX

Cabinet [TYPE A] 32MF301B/F7 (Serial No.: DS3, DS4, DS6), LC320EM2 (Serial No.: DS2, DS4, DS5, DS6, DS7), LC320SS2 (Serial No.: DS3), LC320EM2F (Serial No.: DS1, DS2, DS3, DS4), CLC320EM2F (Serial No.: DS1)

32MF301B/F7 (Serial No.: DS3), LC320EM2 (Serial No.: DS4), LC320SS2 (Serial No.: DS3), LC320EM2F (Serial No.: DS1, DS2, DS3, DS4)

See Electrical Parts List for parts with this mark.

Digital Main CBA Unit

Function CBA Unit

IR Sensor CBA Unit

Power Supply CBA

Stand Assembly

L17

B41

LCD1

A1

A4

A8

A11

A12

B11

SP3801

CL200

SP3802

CL3801

CL3802

B5

AC600

B18

L25

L15

L14

L42

CL632

L14

A2

B22

L27

L28

L27

L25

L27

X7

S6

L1

A15

CL3101

CL3102

CL3005

B11

S6

L1

S6

A42

32MF301B/F7 (Serial No.: DS3, DS4, DS6), LC320EM2 (Serial No.: DS2, DS4, DS5, DS6, DS7), LC320SS2 (Serial No.: DS3), LC320EM2F (Serial No.: DS1, DS2, DS3, DS4)

13-3 FL11.4-B_CEX

Cabinet [TYPE B]

See Electrical Parts List for parts with this mark.

Digital Main CBA Unit

Function CBA Unit

IR Sensor CBA Unit

Power Supply CBA

Stand Assembly

L17

B41

LCD1

A1

A4

A8

A11

A12

B11

SP3801

CL200

SP3802

CL3801

CL3802

B5

AC600

B18

L25

L15

L14

L42

CL632

L14

A2

B22

L27

L28

L27

L25

L27

X7

S6

L1

A15

CL3101

CL3102

CL3005

B11

S6

L1

S6

A42

32MF301B/F7 (Serial No.: TH1) LC320SS2 (Serial No.: TH1) LC320EM2 (Serial No.: TH1)

Packing

L28

S7

LC320EM2 (Serial No.: TH1)

X6X24

Stand Assembly

S3

X2

X3

Ta pe

X4

X1

S6

FRONT

Packing Tape

S5

S4

Ta pe

FRONT

Some Ref. Numbers are not in sequence.

S1

13-4 FL11.4_PEX

TYPE A

PARTS LIST [32MF301B/F7 (Serial No.: DS1)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Ref. No. Description Part No.

STAND ASSEMBLY A17F1UH 1ESA27585 A1 FRONT CABINET A17F0UH 1EM226003B A2 REAR CABINET A17F1UH 1EM027006B A4 FUNCTION KNOB A17F1UH 1EM226223A A8 JACK HOLDER A17F1UH 1EM225384A A11 SENSOR LENS A17N1UH 1EM329957 A12# RATING LABEL A17F0UH ---------A15 ENERGY STAR LABEL A91F2UH ---------A42 ENERGY GUIDE LABEL A17F0UH ---------AC600# AC CORD W/O A GND WIRE UL/CSA/1700/NO/

B5 STAND BRACKET A17F1UH 1EM225385 B11 SPEAKER HOLDER A17F1UH 1EM125714 B18 GASKET A8AF0UH 1EM425861 B22 WALL MOUNT BRACKET A84N0UH 1EM323797 B27 CLOTH(10X180XT0.5) L0336JG 0EM408827 B63 CONNECTOR COVER A17F1UH 1EM331137 B64 CLOTH(10X90XT1.0) A7120UH 1EM424258 B66 CLOTH(15X30XT1.0) B7507UH 0EM402452 B67 CUSHION A17F1UH 1EM435678 B72 CLOTH 15X10XT0.5 1EM420293 CL200 FFC WIRE ASSEMBLY 11PIN/110MM WX1A17F1-101 CL632 FFC WIRE ASSEMBLY 19PIN/295MM WX1A17F1-102 CL3005 FFC WIRE ASSEMBLY 24PIN/213MM WX1A17F1-104 CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

CL3102 WIRE ASSEMBLY 7PIN 7PIN/600MM/BLACK

CL3801 WIRE ASSEMBLY 2PIN 2PIN/150MM/BLACK

CL3802 WIRE ASSEMBLY 2PIN 2PIN/480MM/BLACK

L1 SCREW P-TIGHT 3X10 BIND HEAD+ GBHP3100 L14 SCREW S-TIGHT M3X6 BIND HEAD+ GBJS3060 L15 DOUBLE SEMS SCREW M4X10 + BLK FPH34100 L25 S-TIGHT SCREW M3X6 BIND HEAD+BLACK GBHS3060 L28 STAND SCREW KIT A17F1UH 1ESA27587 L27 SCREW P-TIGHT M4X14 BIND HEAD+BLK GBHP4140 LCD1 LCD MODULE 31.5INCH 31.5INCH UK32MXB SP3801 SPEAKER MAGNETIC S0412F28A DS08130XQ001 SP3802 SPEAKER MAGNETIC S0412F28A DS08130XQ001

BLACK

RED

PACKING

S1 CARTON A17F0UH 1EM434844 S3 STYROFOAM TOP A17F1UH 1EM027385

WAC1720LW005

WX1A17F1T205

WX1A17F1T206

WX1A17F1L301

WX1A17F1R302

Ref. No. Description Part No.

S4 STYROFOAM BOTTOM A17F1UH 1EM027386 S5 SET BAG A17F6UH 1EM330877 S6 SERIAL NO. LABEL A01PBUH ---------S7 STAND BAG A94F0UH 1EM428757

ACCESSORIES

X1 BAG POLYETHYLENE 235X365XT0.03 0EM408420A X2# OWNERS MANUAL A17F0UH 1EMN27701A X3 REMOTE CONTROL NF805UD NF805UD X4 DRY BATTERY R03/2S XB0M451T0006 X6 QUICK START GUIDE A17F0UH 1EMN27702A X7 REGISTRATION CARD (MAGNAVOX)

A17N0UH

1EMN27759

2011/12/05 14-1 A17F0CA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

DIGITAL ASSEMBLY

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A17F0MMA-005-DM FUNCTION CBA UNIT A17F0MMA-005-FN IR SENSOR CBA UNIT A17F0MMA-005-IR

A17F0MMA-005

POWER SUPPLY CBA

Ref. No. Description Part No.

POWER SUPPLY CBA Consists of the following:

CAPACITORS

C200 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 C201 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 C202 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 C203 ELECTROLYTIC CAP. 2.2µF/50V M CE1JMASDL2R2 C205 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 C208 ELECTROLYTIC CAP. 22µF/50V M CE1JMASDL220 C211 CHIP CERAMIC CAP.(1608) CH J 1000pF/50V CHD1JJ3CH102 C212 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 C213 CHIP CERAMIC CAP.(1608) B K 1µF/25V CHD1EK30B105 C214 ELECTROLYTIC CAP. 47µF/25V M CE1EMASDL470 C216 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 C217 ELECTROLYTIC CAP. 10µF/50V M CE1JMASDL100 C220 ELECTROLYTIC CAP. 470µF/25V M CE1EMASDL471 C221 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103 C223 CHIP CERAMIC CAP.(1608) B K 1µF/25V CHD1EK30B105 C225 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 C226 ELECTROLYTIC CAP. 3.3µF/50V M CE1JMASDL3R3 C227 ELECTROLYTIC CAP. 22µF/50V M CE1JMASDL220 C228 ELECTROLYTIC CAP. 2.2µF/50V M CE1JMASDL2R2 C230 ELECTROLYTIC CAP. 100µF/10V M CE1AMASDL101 C231 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 C600# CAP METALLIZED FILM 0.47µF/250V/K/MPX CTA474EUR001 C601# CAP METALLIZED FILM 0.47µF/250V/K/MPX CTA474EUR001 C603 CAP ELECTROLYTIC 270µF/200V CEA271DYG005 C604 CAP ELECTROLYTIC 270µF/200V CEA271DYG005 C605 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 C606 CHIP CERAMIC CAP. B K 1200pF/50V CHD1JK30B122

A17F1MPW-001

Ref. No. Description Part No.

C607 CERAMIC CAP. 820pF/2KV CA3D821PAN04 C608 CHIP CERAMIC CAP. B K 0.068µF/50V CHD1JK30B683 C609 CHIP CERAMIC CAP. B K 1500pF/50V CHD1JK30B152 C610# SAFTY CAP. 1000pF/250V KX CA2E102MR101 C611# SAFTY CAP. 1000pF/250V KX CA2E102MR101 C612# SAFTY CAP. 1000pF/250V KX CA2E102MR101 C613 CERAMIC CAP. 2200pF/1KV CCD3AKA0R222 C631 ELECTROLYTIC CAP. 1000µF/35V M CE1GMZADL102 C632 ELECTROLYTIC CAP. 1000µF/35V M CE1GMZADL102 C634 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 C635 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 C636 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104 C637 ELECTROLYTIC CAP. 470µF/25V M CE1EMASDL471 C638 ELECTROLYTIC CAP. 100µF/25V M CE1EMASDL101 C639 ELECTROLYTIC CAP. 100µF/10V M CE1AMASDL101 C641 CERAMIC CAP. 2200pF/1KV CCD3AKA0R222 C644 ELECTROLYTIC CAP. 1µF/50V M CE1JMASDL1R0 C645 CHIP CERAMIC CAP. B K 2200pF/50V CHD1JK30B222 C646 ELECTROLYTIC CAP. 100µF/10V M CE1AMASDL101 C647 ELECTROLYTIC CAP. 100µF/50V M CE1JMASDL101 C648 ELECTROLYTIC CAP. 2200µF/35V M CE1GMZNDL222 C649 ELECTROLYTIC CAP. 2200µF/35V M CE1GMZNDL222 C1100 CHIP CERAMIC CAP. F Z 2.2µF/50V CHF1JZ30F225 C1101 CHIP CERAMIC CAP. F Z 2.2µF/50V CHF1JZ30F225 C1102 CHIP CERAMIC CAP. F Z 2.2µF/50V CHF1JZ30F225 C1103 CHIP CERAMIC CAP. F Z 2.2µF/50V CHF1JZ30F225 C1104 CAP CERAMIC HV 10pF/6.3KV/SL/J CCC1000MR007 C1105 CHIP CERAMIC CAP. CH J 330pF/50V CHD1JJ3CH331 C1106 CAP CERAMIC HV 10pF/6.3KV/SL/J CCC1000MR007 C1107 CHIP CERAMIC CAP. CH J 330pF/50V CHD1JJ3CH331 C1108 CAP CERAMIC HV 10pF/6.3KV/SL/J CCC1000MR007 C1109 CHIP CERAMIC CAP. CH J 330pF/50V CHD1JJ3CH331 C1110 CAP CERAMIC HV 10pF/6.3KV/SL/J CCC1000MR007 C1111 CHIP CERAMIC CAP. CH J 330pF/50V CHD1JJ3CH331 C1112 CAP CERAMIC HV 10pF/6.3KV/SL/J CCC1000MR007 C1113 CHIP CERAMIC CAP. CH J 330pF/50V CHD1JJ3CH331 C1114 CAP CERAMIC HV 10pF/6.3KV/SL/J CCC1000MR007 C1115 CHIP CERAMIC CAP. CH J 330pF/50V CHD1JJ3CH331 C1116 CHIP CERAMIC CAP. F Z 2.2µF/50V CHF1JZ30F225 C1117 CHIP CERAMIC CAP. F Z 2.2µF/50V CHF1JZ30F225 C1118 CHIP CERAMIC CAP. CH J 330pF/50V CHD1JJ3CH331 C1119 CHIP CERAMIC CAP. CH J 330pF/50V CHD1JJ3CH331 C1120 CHIP CERAMIC CAP. CH J 330pF/50V CHD1JJ3CH331 C1121 CHIP CERAMIC CAP. CH J 330pF/50V CHD1JJ3CH331 C1122 CHIP CERAMIC CAP. CH J 330pF/50V CHD1JJ3CH331 C1123 CHIP CERAMIC CAP. CH J 330pF/50V CHD1JJ3CH331 C1201 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 C1202 CHIP CERAMIC CAP.(1608) B K 6800pF/50V CHD1JK30B682 C1203 CHIP CERAMIC CAP.(1608) B K 6800pF/50V CHD1JK30B682 C1204 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 C1205 CHIP CERAMIC CAP. F Z 2.2µF/50V CHF1JZ30F225 C1206 ELECTROLYTIC CAP. 10µF/50V M CE1JMASDL100 C1207 CHIP CERAMIC CAP.(1608) B K 1000pF/50V CHD1JK30B102 C1208 CAP CHIP 3216 B K 0.47µF/50V CA1J474TE142 C1209 CAP CHIP 3216 B K 0.47µF/50V CA1J474TE142 C1210 CHIP CERAMIC CAP.(1608) B K 0.47µF/16V CHD1CK30B474 C1212 CHIP CERAMIC CAP.(1608) B K 0.47µF/16V CHD1CK30B474 C1213 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103 C1300 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104

2011/12/05 14-2 A17F0EL.fm

Ref. No. Description Part No.

C1301 CHIP CERAMIC CAP.(1608) B K 1000pF/50V CHD1JK30B102 C1302 ELECTROLYTIC CAP. 10µF/50V M CE1JMASDL100 C1303 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 C1304 ELECTROLYTIC CAP. 220µF/35V M CE1GMASDL221 C1305 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104 C1311 CHIP CERAMIC CAP.(1608) B K 1000pF/50V CHD1JK30B102 C1500 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103 C1501 CHIP CERAMIC CAP.(1608) B K 1000pF/50V CHD1JK30B102 C1502 CHIP CERAMIC CAP.(1608) B K 3300pF/50V CHD1JK30B332 C1700 ELECTROLYTIC CAP. 2200µF/35V M CE1GMZNDL222 C1702 CAP CHIP 3216 B K 1µF/50V CA1J105TE142 C1703 CHIP CERAMIC CAP.(1608) B K 1000pF/50V CHD1JK30B102 C1704 CHIP CERAMIC CAP.(1608) B K 1000pF/50V CHD1JK30B102 C1705 CHIP CERAMIC CAP.(1608) B K 0.022µF/50V CHD1JK30B223 C1706 CHIP CERAMIC CAP.(1608) B K 1000pF/50V CHD1JK30B102 C1707 CHIP CERAMIC CAP.(1608) B K 1000pF/50V CHD1JK30B102 C1708 CHIP CERAMIC CAP.(1608) B K 0.022µF/50V CHD1JK30B223 C1709 ELECTROLYTIC CAP. 2200µF/35V M CE1GMZNDL222 C1710 CAP CHIP 3216 B K 1µF/50V CA1J105TE142

CONNECTORS

CN200 FFC CONNECTOR IMSA-9615S-11A-PP-A JC96J11ER007 CN600# VH CONNECTOR PRINT OSU B2P3S-

CN632 FMN CONNECTOR TOP 19P IMSA-9615S-19A-

CN1100# CONNECTOR/JACK 1747386-1 JB17J02AP002 CN1101# CONNECTOR/JACK 1747386-1 JB17J02AP002 CN1102# CONNECTOR/JACK 1747386-1 JB17J02AP002

VH(LF)(SN)

PP-A

J3VH030JG002

JC96J19ER007

DIODES

D200 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D201 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D202 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D205 DIODE ZENER 24BSC-T26 NDTC024BST26 D206 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D207 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D208 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D210 DIODE ZENER 6V2BSB-T26 NDTB6R2BST26 D211 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D212 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D221 IC SHUNT REGULATOR KIA431-AT/P NSZBA0TJY036 D222 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D600# DIODE GENERAL PURPOSE 1N5406-BU NDLZ1N5406BU D601# DIODE GENERAL PURPOSE 1N5406-BU NDLZ1N5406BU D602# DIODE GENERAL PURPOSE 1N5406-BU NDLZ1N5406BU D603# DIODE GENERAL PURPOSE 1N5406-BU NDLZ1N5406BU D604# DIODE ZENER 27BSB-T26 NDTB027BST26 D605 DIODE ZENER 4V3BSB-T26 NDTB4R3BST26 D607# SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D609 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D610# DIODE ZENER 1ZB36BB NDWZ0001ZB36 D611 DIODE ZENER 1ZB220-YBB NDWZ01ZB220Y D613 DIODE FAST RECOVERY FR155-B/P NDWZ0FR155BP D631 DIODE ZENER 5V6BSB-T26 NDTB5R6BST26 D632 DIODE ZENER 5V6BSB-T26 NDTB5R6BST26 D633 DIODE ZENER 5V6BSB-T26 NDTB5R6BST26 D634 DIODE SCHOTTKY SB3150BH NDWZ00SB3150 D635 DIODE ZENER 1ZB7.5BB NDWZ001ZB7R5 D637 DIODE SCHOTTKY SB3150BH NDWZ00SB3150 D638 DIODE ZENER 10BSB-T26 NDTB010BST26 D639 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D640 DIODE SCHOTTKY SMD SK2B-TR ND1Z00SK2BTR D641 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D642 DIODE SK16-T/R ND1Z0000SK16

Ref. No. Description Part No.

D643 DIODE SK16-T/R ND1Z0000SK16 D644 DIODE SCHOTTKY SB3150BH NDWZ00SB3150 D645 DIODE ZENER 1ZB22BB NDWZ0001ZB22 D646 DIODE SCHOTTKY SB3150BH NDWZ00SB3150 D648 DIODE ZENER 1ZB30BB NDWZ0001ZB30 D649 DIODE SK16-T/R ND1Z0000SK16 D650 DIODE ZENER 5V6BSB-T26 NDTB5R6BST26 D651 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D652 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D654 DIODE ZENER 5V6BSB-T26 NDTB5R6BST26 D655 DIODE ZENER 3V3BSB-T26 NDTB3R3BST26 D656 DIODE ZENER 5V6BSB-T26 NDTB5R6BST26 D657 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D658 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D660 DIODE FAST RECOVERY RS1GJTB ND1Z0RS1GJTB D663 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1200 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1201 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1202 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1203 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1300 DIODE ZENER 5V6BSB-T26 NDTB5R6BST26 D1301 DIODE ZENER 5V6BSB-T26 NDTB5R6BST26 D1500 SWITCHING DIODE DAN202U T106 QD1Z0DAN202U D1501 SWITCHING DIODE DAN202U T106 QD1Z0DAN202U D1502 SWITCHING DIODE DAN202U T106 QD1Z0DAN202U D1503 SWITCHING DIODE DAN202U T106 QD1Z0DAN202U D1504 SWITCHING DIODE DAN202U T106 QD1Z0DAN202U D1505 SWITCHING DIODE DAN202U T106 QD1Z0DAN202U D1506 SWITCHING DIODE DAN202U T106 QD1Z0DAN202U D1507 SWITCHING DIODE DAN202U T106 QD1Z0DAN202U D1508 SWITCHING DIODE DAN202U T106 QD1Z0DAN202U D1700 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1701 DIODE ZENER 15BSB-T26 NDTB015BST26 D1702 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1703 DIODE ZENER 15BSB-T26 NDTB015BST26 D1704 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1705 DIODE ZENER 15BSB-T26 NDTB015BST26 D1706 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1707 DIODE ZENER 15BSB-T26 NDTB015BST26

ICS

IC200 IC TL3472CDR NSZBA0TTY115 IC202 IC(REGULATOR) PQ200WNA1ZPH QSZBA0TSH072 IC601# IC PHOTOCOUPLER TLP781F(D4-FUNBLL F) QPEL781FBLLF IC1200 IC INVERTER CONTROL BD9244AFV/SSOP/

24PIN

QSCA0T0RM222

COILS

L600# COIL LINE FILTER ST0807ET28-009 10MH LLEG0Z0Y2029 L601# COIL LINE FILTER ST0807ET28-009 10MH LLEG0Z0Y2029

TRANSISTORS

Q200 PNP TRANSISTOR SMD 2SA1576UBTLQ QQ1Q2SA1576U Q201 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q202 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q203 PNP TRANSISTOR SMD 2SA1576UBTLQ QQ1Q2SA1576U Q204 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q206 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q207 PNP TRANSISTOR SMD 2SA1576UBTLQ QQ1Q2SA1576U Q208 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q210 PNP TRANSISTOR SMD 2SA1576UBTLQ QQ1Q2SA1576U Q211 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q212 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q213 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q214 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q221 TRANSISTOR 2SC2120-Y(TE2 F T) QQSY2SC2120F

2011/12/05 14-3 A17F0EL.fm

Ref. No. Description Part No.

Q222 TRANSISTOR 2SA950-O (TE2 F T) QQS002SA950F Q600# FET MOS TK10A50D QFWZTK10A50D Q601# TRANSISTOR 2SC2120-Y(TE2 F T) QQSY2SC2120F Q631 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q632 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q633 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q634 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q635 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q636 TRANSISTOR KTC3199-GR-AT/P NQS4KTC3199P Q1201 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q1202 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q1300 PNP TRANSISTOR SMD 2SA1576UBTLQ QQ1Q2SA1576U Q1301 CHIP TRANSISTOR KTC3875S-Y-RTK/P NQ1YKTC3875S Q1303 PNP TRANSISTOR SMD 2SA1576UBTLQ QQ1Q2SA1576U Q1700# FET MOS SMD TK50P04M1(T6RSS-Q) QF1ZK50P04M1 Q1701# FET MOS SMD TK50P04M1(T6RSS-Q) QF1ZK50P04M1 Q1702# FET MOS SMD TK50P04M1(T6RSS-Q) QF1ZK50P04M1 Q1703# FET MOS SMD TK50P04M1(T6RSS-Q) QF1ZK50P04M1

RESISTORS

R200 RES CHIP 1608 1/10W J 100k Ω RRXA104HH013 R201 RES CHIP 1608 1/10W J 1.0k Ω RRXA102HH013 R203 RES CARBON FILM T 1/4W J 560 Ω RCX4561T1001 R205 RES CHIP 1608 1/10W J 1.0k Ω RRXA102HH013 R206 RES CHIP 1608 1/10W J 100k Ω RRXA104HH013 R207 RES CHIP 1608 1/10W J 1.0 Ω RRXA1R0HH013 R208 RES CHIP 1608 1/10W 0 Ω RRXA000HH014 R209 RES CARBON FILM T 1/4W J 10 Ω RCX4100T1001 R210 RES CHIP 1608 1/10W 0 Ω RRXA000HH014 R211 RES CARBON FILM T 1/4W J 10 Ω RCX4100T1001 R212 RES CHIP 1608 1/10W J 100k Ω RRXA104HH013 R213 RES CHIP 1608 1/10W 0 Ω RRXA000HH014 R215 RES CHIP 1608 1/10W J 12k Ω RRXA123HH013 R216 RES CHIP 1608 1/10W J 1.2k Ω RRXA122HH013 R217 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R218 RES CHIP 1608 1/10W J 15k Ω RRXA153HH013 R219 RES CHIP 1608 1/10W J 1.0k Ω RRXA102HH013 R222 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R224 RES CHIP 1608 1/10W J 47k Ω RRXA473HH013 R225 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R226 RES CHIP 1608 1/10W F 330 Ω RTW3300HH008 R227 RES CHIP 1608 1/10W J 47k Ω RRXA473HH013 R228 RES CHIP 1608 1/10W J 4.7k Ω RRXA472HH013 R229 RES CHIP 1608 1/10W J 22k Ω RRXA223HH013 R230 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R231 RES CHIP 1608 1/10W J 47k Ω RRXA473HH013 R232 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R233 WIRE COPPER 6111-06003-0120 XZ40C0SHG002 R234 RES. CARBON FILM J 1/2W J 2.2 Ω RCX22R2T1003 R235 WIRE COPPER 6111-06003-0120 XZ40C0SHG002 R236 RES CHIP 1608 1/10W F 11.0k Ω RTW1102HH008 R237 RES CHIP 1608 1/10W F 750 Ω RTW7500HH008 R238 RES CHIP 1608 1/10W F 2.20k Ω RTW2201HH008 R239 METAL OXIDE FILM RES. 1W J 8.2 Ω RN018R2ZU001 R240 RES CARBON FILM T 1/4W J 3.9k Ω RCX4392T1001 R241 RES CHIP 1608 1/10W J 6.8k Ω RRXA682HH013 R242 RES CHIP 1608 1/10W J 2.7k Ω RRXA272HH013 R243 RES CHIP 1608 1/10W F 240 Ω RTW2400HH008 R244 RES CHIP 1608 1/10W F 2.20k Ω RTW2201HH008 R246 RES CARBON FILM T 1/4W J 3.9k Ω RCX4392T1001 R247 RES CHIP 1608 1/10W J 100k Ω RRXA104HH013 R248 RES CHIP 1608 1/10W J 56k Ω RRXA563HH013 R249 RES CHIP 1608 1/10W J 6.8k Ω RRXA682HH013

Ref. No. Description Part No.

R251 RES CHIP 1608 1/10W J 22k Ω RRXA223HH013 R252 RES CHIP 1608 1/10W J 39k Ω RRXA393HH013 R253 RES CHIP 1608 1/10W J 22k Ω RRXA223HH013 R254 RES CHIP 1608 1/10W J 22k Ω RRXA223HH013 R255 RES CARBON FILM T 1/4W J 390 Ω RCX4391T1001 R256 WIRE COPPER 6111-06003-0120 XZ40C0SHG002 R257 RES CARBON FILM T 1/4W J 8.2k Ω RCX4822T1001 R258 RES CARBON FILM T 1/4W J 2.7k Ω RCX4272T1001 R260 RES CHIP 1608 1/10W J 47k Ω RRXA473HH013 R261 RES CHIP 1608 1/10W J 22k Ω RRXA223HH013 R262 RES CHIP 1608 1/10W J 12k Ω RRXA123HH013 R263 RES CARBON FILM T 1/4W J 470 Ω RCX4471T1001 R264 RES CHIP 1608 1/10W J 15k Ω RRXA153HH013 R265 RES CARBON FILM T 1/4W J 8.2k Ω RCX4822T1001 R266 RES CARBON FILM T 1/4W J 47k Ω RCX4473T1001 R267 RES CHIP 1608 1/10W J 47k Ω RRXA473HH013 R268 RES CARBON FILM T 1/4W J 47k Ω RCX4473T1001 R269 RES CHIP 1608 1/10W J 12k Ω RRXA123HH013 R270 RES CHIP 1608 1/10W J 1.5k Ω RRXA152HH013 R600 RES CHIP 3216 1/4W J 220k Ω RRX4224HH034 R601# RES. CARBON FILM J 1/2W J 1.2M Ω RCX2125T1003 R602# CEMENT RESISTOR 5W J 2.2 Ω H 10MM RW052R2PAK10 R603 RES CHIP 3216 1/4W J 220k Ω RRX4224HH034 R604 RES CHIP 3216 1/4W J 220k Ω RRX4224HH034 R605 RES CARBON FILM T 1/4W J 220 Ω RCX4221T1001 R606 RES CARBON FILM T 1/4W J 180 Ω RCX4181T1001 R607 RES CARBON FILM T 1/4W J 1.2k Ω RCX4122T1001 R608# METAL OXIDE FILM RES. 2W J 0.18 Ω RN02R18ZU001 R609 RES CARBON FILM T 1/4W J 3.9k Ω RCX4392T1001 R610 RES CARBON FILM T 1/4W J 270 Ω RCX4271T1001 R611# CEMENT RESISTOR 5W J 2.2 Ω H 10MM RW052R2PAK10 R612 METAL OXIDE FILM RES. 1W J 68k Ω RN01683ZU001 R613 METAL OXIDE FILM RES. 1W J 68k Ω RN01683ZU001 R631 RES CHIP 1608 1/10W J 15k Ω RRXA153HH013 R632 RES CHIP 1608 1/10W J 47k Ω RRXA473HH013 R633 WIRE COPPER 6111-06003-0120 XZ40C0SHG002 R634 WIRE COPPER 6111-06003-0120 XZ40C0SHG002 R635 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R636 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R637 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R638 RES CHIP 1608 1/10W J 22k Ω RRXA223HH013 R641 RES CHIP 1608 1/10W J 22k Ω RRXA223HH013 R642 RES CHIP 1608 1/10W F 43.0k Ω RTW4302HH008 R643 RES CHIP 1608 1/10W F 47.0k Ω RTW4702HH008 R644 RES CHIP 1608 1/10W J 18k Ω RRXA183HH013 R645 RES CHIP 1608 1/10W F 27.0k Ω RTW2702HH008 R647 RES CHIP 1608 1/10W F 27.0k Ω RTW2702HH008 R649 RES CARBON FILM T 1/4W J 3.9k Ω RCX4392T1001 R650 RES CHIP 1608 1/10W J 1.0 Ω RRXA1R0HH013 R651 RES CHIP 1608 1/10W F 820 Ω RTW8200HH008 R652 RES CHIP 1608 1/10W F 18.0k Ω RTW1802HH008 R654 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R655 RES CHIP 1608 1/10W J 47k Ω RRXA473HH013 R656 RES CARBON FILM T 1/4W J 220 Ω RCX4221T1001 R657 RES CARBON FILM T 1/4W J 15 Ω RCX4150T1001 R658 RES CARBON FILM T 1/4W J 220 Ω RCX4221T1001 R659 RES CARBON FILM T 1/4W J 220 Ω RCX4221T1001 R660 WIRE COPPER 6111-06003-0120 XZ40C0SHG002 R662 RES CARBON FILM T 1/4W J 220 Ω RCX4221T1001 R663 RES CHIP 1608 1/10W J 39k Ω RRXA393HH013 R664 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R1100 RES CHIP 1608 1/10W F 39.0k Ω RTW3902HH008 R1101 RES CHIP 1608 1/10W 0 Ω RRXA000HH014

2011/12/05 14-4 A17F0EL.fm

Ref. No. Description Part No.

R1102 RES CHIP 1608 1/10W F 2.20k Ω RTW2201HH008 R1103 RES CARBON FILM T 1/4W G 470 Ω RCX4471T1002 R1104 RES CHIP 1608 1/10W F 100 Ω RTW1000HH008 R1105 RES CHIP 1608 1/10W F 13.0 Ω RTW13R0HH008 R1106 RES CARBON FILM T 1/4W G 470 Ω RCX4471T1002 R1107 RES CHIP 1608 1/10W F 100 Ω RTW1000HH008 R1108 RES CHIP 1608 1/10W F 13.0 Ω RTW13R0HH008 R1109 RES CHIP 1608 1/10W F 39.0k Ω RTW3902HH008 R1110 RES CHIP 1608 1/10W 0 Ω RRXA000HH014 R1111 RES CHIP 1608 1/10W F 2.20k Ω RTW2201HH008 R1112 RES CHIP 1608 1/10W F 39.0k Ω RTW3902HH008 R1113 RES CHIP 1608 1/10W 0 Ω RRXA000HH014 R1114 RES CHIP 1608 1/10W F 2.20k Ω RTW2201HH008 R1115 RES CARBON FILM T 1/4W G 470 Ω RCX4471T1002 R1116 RES CHIP 1608 1/10W F 100 Ω RTW1000HH008 R1117 RES CHIP 1608 1/10W F 13.0 Ω RTW13R0HH008 R1118 RES CARBON FILM T 1/4W G 470 Ω RCX4471T1002 R1119 RES CHIP 1608 1/10W F 100 Ω RTW1000HH008 R1120 RES CHIP 1608 1/10W F 13.0 Ω RTW13R0HH008 R1121 RES CHIP 1608 1/10W F 39.0k Ω RTW3902HH008 R1122 RES CHIP 1608 1/10W 0 Ω RRXA000HH014 R1123 RES CHIP 1608 1/10W F 2.20k Ω RTW2201HH008 R1124 RES CHIP 1608 1/10W F 39.0k Ω RTW3902HH008 R1125 RES CHIP 1608 1/10W 0 Ω RRXA000HH014 R1126 RES CHIP 1608 1/10W F 2.20k Ω RTW2201HH008 R1127 RES CARBON FILM T 1/4W G 470 Ω RCX4471T1002 R1128 RES CHIP 1608 1/10W F 100 Ω RTW1000HH008 R1129 RES CHIP 1608 1/10W F 13.0 Ω RTW13R0HH008 R1130 RES CARBON FILM T 1/4W G 470 Ω RCX4471T1002 R1131 RES CHIP 1608 1/10W F 100 Ω RTW1000HH008 R1132 RES CHIP 1608 1/10W F 13.0 Ω RTW13R0HH008 R1133 RES CHIP 1608 1/10W F 39.0k Ω RTW3902HH008 R1134 RES CHIP 1608 1/10W 0 Ω RRXA000HH014 R1135 RES CHIP 1608 1/10W F 2.20k Ω RTW2201HH008 R1200 RES CHIP 1608 1/10W J 68k Ω RRXA683HH013 R1201 RES CHIP 1608 1/10W J 68k Ω RRXA683HH013 R1202 RES CHIP 1608 1/10W F 130k Ω RTW1303HH008 R1203 RES CHIP 1608 1/10W F 8.20k Ω RTW8201HH008 R1204 RES CHIP 1608 1/10W F 75.0k Ω RTW7502HH008 R1205 RES CHIP 1608 1/10W F 560k Ω RTW5603HH008 R1206 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R1207 RES CHIP 1608 1/10W J 33k Ω RRXA333HH013 R1208 RES CHIP 1608 1/10W J 22k Ω RRXA223HH013 R1209 RES CHIP 1608 1/10W J 4.7k Ω RRXA472HH013 R1212 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R1213 RES CHIP 1608 1/10W J 4.7k Ω RRXA472HH013 R1214 RES CHIP 1608 1/10W 0 Ω RRXA000HH014 R1215 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R1216 RES CHIP 1608 1/10W J 100 Ω RRXA101HH013 R1221 RES CHIP 1608 1/10W J 1.0 Ω RRXA1R0HH013 R1222 RES CHIP 1608 1/10W J 10 Ω RRXA100HH013 R1223 RES CHIP 1608 1/10W J 10 Ω RRXA100HH013 R1229 RES CHIP 1608 1/10W 0 Ω RRXA000HH014 R1300 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R1301 RES CHIP 1608 1/10W F 47.0k Ω RTW4702HH008 R1302 RES CHIP 1608 1/10W F 51.0k Ω RTW5102HH008 R1303 RES CHIP 1608 1/10W J 4.7k Ω RRXA472HH013 R1304 RES CHIP 1608 1/10W J 4.7k Ω RRXA472HH013 R1305 METAL OXIDE RES. 2W J 510 Ω RN02511ZU001 R1306 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R1307 RES CHIP 1608 1/10W J 1.0k Ω RRXA102HH013 R1308 RES CHIP 1608 1/10W J 4.7k Ω RRXA472HH013 R1309 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013

Ref. No. Description Part No.

R1310 RES CHIP 1608 1/10W J 22k Ω RRXA223HH013 R1500 RES CHIP 1608 1/10W F 1.00M Ω RTW1004HH008 R1501 RES CHIP 1608 1/10W F 100k Ω RTW1003HH008 R1502 RES CHIP 1608 1/10W F 100k Ω RTW1003HH008 R1503 RES CHIP 1608 1/10W F 100k Ω RTW1003HH008 R1504 RES CHIP 1608 1/10W F 100k Ω RTW1003HH008 R1505 RES CHIP 1608 1/10W F 100k Ω RTW1003HH008 R1506 RES CHIP 1608 1/10W F 100k Ω RTW1003HH008 R1507 RES CHIP 1608 1/10W F 100k Ω RTW1003HH008 R1508 RES CHIP 1608 1/10W F 100k Ω RTW1003HH008 R1509 RES CHIP 1608 1/10W F 100k Ω RTW1003HH008 R1510 RES CHIP 1608 1/10W F 100k Ω RTW1003HH008 R1511 RES CHIP 1608 1/10W F 100k Ω RTW1003HH008 R1512 RES CHIP 1608 1/10W F 100k Ω RTW1003HH008 R1513 RES CHIP 1608 1/10W F 1.00M Ω RTW1004HH008 R1514 RES CHIP 1608 1/10W F 39.0k Ω RTW3902HH008 R1515 RES CHIP 1608 1/10W F 27.0k Ω RTW2702HH008 R1516 RES CHIP 1608 1/10W F 6.80k Ω RTW6801HH008 R1700 RES CHIP 1608 1/10W J 100 Ω RRXA101HH013 R1701 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R1702 RES CHIP 1608 1/10W J 100 Ω RRXA101HH013 R1703 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R1704 METAL OXIDE FILM RES. 1W J 4.7 Ω RN014R7ZU001 R1705 RES CHIP 1608 1/10W J 100 Ω RRXA101HH013 R1706 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R1707 RES CHIP 1608 1/10W J 100 Ω RRXA101HH013 R1708 RES CHIP 1608 1/10W J 10k Ω RRXA103HH013 R1709 METAL OXIDE FILM RES. 1W J 4.7 Ω RN014R7ZU001

MISCELLANEOUS

B41 HEAT SINK PNB ASSEMBLY A94F0UH 1EM428123 BC601 BEADS INDUCTOR FBR07HA121SB-00 LLBF00STU030 BC602 BEADS INDUCTOR FBR07HA121SB-00 LLBF00STU030 F601# FUSE STC4A125V U/CT PAGE20CW3402 FH601 FUSE HOLDER MSF-015 LF (B110) XH01Z00LY002 FH602 FUSE HOLDER MSF-015 LF (B110) XH01Z00LY002 JS200 WIRE COPPER 6111-06003-0120 XZ40C0SHG002 JS660 WIRE COPPER 6111-06003-0120 XZ40C0SHG002 JS1200 WIRE COPPER 6111-06003-0120 XZ40C0SHG002 L17 SCREW B-TIGHT D3X8 BIND HEAD+ GBJB3080 SA601# SURGE ABSORBER 470V+-10PER NVQZ10D471KB T600# TRANS POWER 11714 LTT3PC0KT069

When you replace one of the below Trans Inverters on this CBA, please replace with the one that has same parts number. Do not mix different parts number’s Trans Inverter.

T1100# TRANS INV HVT-325 LTZ3PZ0XB018 T1101# TRANS INV HVT-325 LTZ3PZ0XB018 T1102# TRANS INV HVT-325 LTZ3PZ0XB018

or T1100# TRANS INV TZ.7617A.101 LTZ3PZDAR014 T1101# TRANS INV TZ.7617A.101 LTZ3PZDAR014 T1102# TRANS INV TZ.7617A.101 LTZ3PZDAR014

2011/12/05 14-5 A17F0EL.fm

TYPE A

PARTS LIST [32MF301B/F7 (Serial No.: DS2)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B63 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

BLACK

RED

WAC1720LW006

WX1A17F1T207

2011/12/05 14-6 A17F0CA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

POWER SUPPLY CBA A17F1MPWA002 CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001

2011/12/05 14-7 A17F0EL.fm

TYPE A

PARTS LIST [32MF301B/F7 (Serial No.: DS3)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B11 SPEAKER HOLDER A17F1UH 1EM126473 B27 Not used B63 Not used B64 Not used B66 Not used B67 Not used B72 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

L42 SHOULDER SCREW A01Q0UF 1EM328277 SP3801 SPEAKER MAGNETIC S0412F28E DS08130XQ004 SP3802 SPEAKER MAGNETIC S0412F28E DS08130XQ004

BLACK

RED

WAC1720LW006

WX1A17F1T207

2011/12/05 14-8 A17F0(DS3)CA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

POWER SUPPLY CBA A17F1MPWA002 C600# CAP METALLIZED FILM 0.47µF/250V/K/MPX CTA474EUR001 C601# CAP METALLIZED FILM 0.47µF/250V/K/MPX CTA474EUR001 C602 CAP ELECTROLYTIC 390µF/200V CEB391DYG006 C603 Not used C604 Not used CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001 R208 Not used R210 Not used R213 Not used R247 RES CHIP 1608 1/10W J 100k Ω RRXA104HH013 R605 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R606 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R633 Not used R634 Not used R642 RES CHIP 1608 1/10W F 75.0k Ω RTW7502HH008 R660 Not used R1101 Not used R1110 Not used R1113 Not used R1122 Not used R1125 Not used R1134 Not used R1214 Not used R1229 Not used FH601 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 FH602 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 JS200 Not used JS1200 Not used

2011/12/05 14-9 A17F0(DS3)EL.fm

TYPE A

PARTS LIST [32MF301B/F7 (Serial No.: DS4)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

A15 Not used AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B11 SPEAKER HOLDER A17F1UH 1EM126473 B27 Not used B63 Not used B64 Not used B66 Not used B67 Not used B72 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

L42 SHOULDER SCREW A01Q0UF 1EM328277 LCD1 LCD MODULE 31.5INCH UK32MXJ SP3801 SPEAKER MAGNETIC S0412F28E DS08130XQ004 SP3802 SPEAKER MAGNETIC S0412F28E DS08130XQ004 S1 CARTON A17FMUH 1EM436598A X2# OWNERS MANUAL A17FMUH 1EMN28739A X4 BATTERY DRY R03(SIZE AAA ) XB00M0RKT001

BLACK

RED

WAC1720LW006

WX1A17F1T207

2011/12/05 14-10 A17FMCA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A17FMMMA-001-DM FUNCTION CBA UNIT A17FMMMA-001-FN IR SENSOR CBA UNIT A17FMMMA-001-IR

A17FMMMA-001

POWER SUPPLY CBA A17FDMPW-001 C602 CAP ELECTROLYTIC 390µF/200V CEB391DYG006 C603 Not used C604 Not used CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001 D611 Not used R208 Not used R210 Not used R213 Not used R605 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R606 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R633 Not used R634 Not used R642 RES CHIP 1608 1/10W F 75.0k Ω RTW7502HH008 R660 Not used R1101 Not used R1110 Not used R1113 Not used R1122 Not used R1125 Not used R1134 Not used R1214 Not used R1229 Not used FH601 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 FH602 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 JS200 Not used JS1200 Not used

2011/12/05 14-11 A17FMEL.fm

TYPE A

PARTS LIST [32MF301B/F7 (Serial No.: DS6)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

A15 Not used AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B11 SPEAKER HOLDER A17F1UH 1EM126473 B27 Not used B63 Not used B64 Not used B66 Not used B67 Not used B72 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

CL3102 WIRE ASSEMBLY 7PIN 7PIN/600MM/BLACK

L42 SHOULDER SCREW A01Q0UF 1EM328277 LCD1 LCD MODULE UK32AXG SP3801 SPEAKER MAGNETIC S0412F28E DS08130XQ004 SP3802 SPEAKER MAGNETIC S0412F28E DS08130XQ004 S1 CARTON A17FMUH 1EM436598A X2# OWNERS MANUAL A17FMUH 1EMN28739A X4 BATTERY DRY R03(SIZE AAA ) XB00M0RKT001

BLACK

RED

WAC1720LW006

WX1A17F1T217

WX1A17F1T216

2011/12/05 14-12 A1AFACA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A1AFAMMA-001-DM FUNCTION CBA UNIT A1AFAMMA-001-FN IR SENSOR CBA UNIT A1AFAMMA-001-IR

A1AFAMMA-001

Ref. No. Description Part No.

R605 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R606 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R633 Not used R634 Not used R642 RES CHIP 1608 1/10W F 75.0k Ω RTW7502HH008 R660 Not used R1101 Not used R1110 Not used R1113 Not used R1122 Not used R1125 Not used R1134 Not used R1214 Not used R1229 Not used FH601 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 FH602 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 JS200 Not used JS660 Not used JS1200 Not used

POWER SUPPLY CBA A17F7MPW-001 C602 CAP ELECTROLYTIC 390µF/200V CEB391DYG006 C603 Not used C604 Not used CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001 D205 DIODE ZENER 33BSB-T26 NDTB033BST26 D210 DIODE ZENER 5V1BSB-T26 NDTB5R1BST26 D661 DIODE FAST RECOVERY RS1GJTB ND1Z0RS1GJTB D662 DIODE FAST RECOVERY RS1GJTB ND1Z0RS1GJTB Q1700# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 Q1701# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 Q1702# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 Q1703# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 R203 RES CARBON FILM T 1/4W J 1.0k Ω RCX4102T1001 R208 Not used R210 Not used R213 Not used R215 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R216 RES CHIP 1608 1/10W F 1.50k Ω RTW1501HH008 R217 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R218 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R233 RES. CARBON FILM J 1/2W J 8.2 Ω RCX28R2T1003 R234 RES. CARBON FILM J 1/2W J 5.6 Ω RCX25R6T1003 R235 RES. CARBON FILM J 1/2W J 5.6 Ω RCX25R6T1003 R236 RES CHIP 1608 1/10W F 9.10k Ω RTW9101HH008 R237 RES CHIP 1608 1/10W 0 Ω RRXA000HH014 R255 RES CARBON FILM T 1/4W J 150 Ω RCX4151T1001 R257 RES CARBON FILM T 1/4W J 47k Ω RCX4473T1001 R258 RES CARBON FILM T 1/4W J 680 Ω RCX4681T1001 R263 RES CARBON FILM T 1/4W J 270 Ω RCX4271T1001 R268 RES CARBON FILM 1/4W J 39k Ω RCX4393FS002

2011/12/05 14-13 A1AFAEL.fm

TYPE A

PARTS LIST [LC320EM2 (Serial No.: DS1)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No. : DS1)

Ref. No. Description Part No.

A1 FRONT CABINET A17F1UH 1EM027005B A12# RATING LABEL A17F1UH ---------A42 ENERGY GUIDE LABEL A17F1UH ---------S1 CARTON A17F1UH 1EM330221A X2# OWNERS MANUAL A17F1UH 1EMN27479B X3 REMOTE CONTROL NH001UD NH001UD X6 QUICK START GUIDE A17F1UH 1EMN27480A X7 REGISTRATION CARD (EMERSON) A17N1UH 1EMN27763

2011/12/05 14-14 A17F1CA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No. : DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A17F1MMA-008-DM FUNCTION CBA UNIT A17F1MMA-008-FN IR SENSOR CBA UNIT A17F1MMA-008-IR

A17F1MMA-008

POWER SUPPLY CBA ----------

You cannot mix components under Type 1 with the ones under Type 2.

Type 1: (“78R000ZF” is engraved on Type 1 IC REGULATOR.)

IC202 IC REGULATOR KIA78R000ZF-RTF/P NSCA0T0JY016 R226 RES CHIP 1608 1/10W F 1.4k Ω RTW1401HH008 R244 RES CHIP 1608 1/10W F 1k Ω RTW1001HH008

←Make sure to use this IC202 with R226 (1.4k Ω)

and R244 (1k Ω).

or

Type 2: (“200WNA1” is engraved on Type 2 IC REGULATOR.)

IC202 IC(REGULATOR) PQ200WNA1ZPH QSZBA0TSH072 R226 RES CHIP 1608 1/10W F 330 Ω RTW3300HH008 R244 RES CHIP 1608 1/10W F 2.2k Ω RTW2201HH008

←Make sure to use this IC202 with R226 (330 Ω)

and R244 (2.2k Ω).

2011/12/05 14-15 A17F1EL.fm

TYPE A

PARTS LIST [LC320EM2 (Serial No.: DS2)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

A1 FRONT CABINET A17F1UH 1EM027005B A12# RATING LABEL A17F1UH ---------A15 Not Used A42 ENERGY GUIDE LABEL A17F1UH ---------AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B11 SPEAKER HOLDER A17F1UH 1EM126473 B27 Not Used B63 Not Used B64 Not Used B66 Not Used B67 Not Used B72 Not Used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

CL3102 WIRE ASSEMBLY 7PIN 7PIN/600MM/BLACK

L42 SHOULDER SCREW A01Q0UF 1EM328277 LCD1 LCD MODULE UK32AXD SP3801 SPEAKER MAGNETIC S0412F28E DS08130XQ004 SP3802 SPEAKER MAGNETIC S0412F28E DS08130XQ004 S1 CARTON A17F1UH 1EM330221A X2# OWNERS MANUAL A17F1UH 1EMN27479B X3 REMOTE CONTROL NH001UD NH001UD X4 BATTERY DRY R03(SIZE AAA ) XB00M0RKT001 X6 QUICK START GUIDE A17F1UH 1EMN27480A X7 REGISTRATION CARD (EMERSON) A17N1UH 1EMN27763

BLACK

RED

WAC1720LW006

WX1A17F1T217

WX1A17F1T216

2011/12/05 14-16 A17F7CA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A17F7MMA-002-DM FUNCTION CBA UNIT A17F7MMA-002-FN IR SENSOR CBA UNIT A17F7MMA-002-IR

A17F7MMA-002

Ref. No. Description Part No.

R263 RES CARBON FILM T 1/4W J 270 Ω RCX4271T1001 R268 RES CARBON FILM 1/4W J 39k Ω RCX4393FS002 R605 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R606 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R633 Not Used R634 Not Used R642 RES CHIP 1608 1/10W F 75.0k Ω RTW7502HH008 R660 Not Used R1101 Not Used R1110 Not Used R1113 Not Used R1122 Not Used R1125 Not Used R1134 Not Used R1214 Not Used R1229 Not Used FH601 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 FH602 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 JS200 Not Used JS660 Not Used JS1200 Not Used

POWER SUPPLY CBA A17F7MPW-001 C602 CAP ELECTROLYTIC 390µF/200V CEB391DYG006 C603 Not Used C604 Not Used CN600# Not Used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001 D205 DIODE ZENER 33BSB-T26 NDTB033BST26 D210 DIODE ZENER 5V1BSB-T26 NDTB5R1BST26 D611 Not Used D635 Not Used D661 DIODE FAST RECOVERY RS1GJTB ND1Z0RS1GJTB D662 DIODE FAST RECOVERY RS1GJTB ND1Z0RS1GJTB Q1700# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 Q1701# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 Q1702# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 Q1703# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 R203 RES CARBON FILM T 1/4W J 1.0k Ω RCX4102T1001 R208 Not Used R210 Not Used R213 Not Used R215 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R216 RES CHIP 1608 1/10W F 1.50k Ω RTW1501HH008 R217 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R218 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R233 RES. CARBON FILM J 1/2W J 8.2 Ω RCX28R2T1003 R234 RES. CARBON FILM J 1/2W J 5.6 Ω RCX25R6T1003 R235 RES. CARBON FILM J 1/2W J 5.6 Ω RCX25R6T1003 R236 RES CHIP 1608 1/10W F 9.10k Ω RTW9101HH008 R237 RES CHIP 1608 1/10W 0 Ω RRXA000HH014 R255 RES CARBON FILM T 1/4W J 150 Ω RCX4151T1001 R257 RES CARBON FILM T 1/4W J 47k Ω RCX4473T1001 R258 RES CARBON FILM T 1/4W J 680 Ω RCX4681T1001

2011/12/05 14-17 A17F7EL.fm

TYPE A

PARTS LIST [LC320EM2 (Serial No.: DS3)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

A1 FRONT CABINET A17F1UH 1EM027005B A12# RATING LABEL A17F1UH ---------A42 ENERGY GUIDE LABEL A17F1UH ---------AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B63 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

S1 CARTON A17F1UH 1EM330221A X2# OWNERS MANUAL A17F1UH 1EMN27479B X3 REMOTE CONTROL NH001UD NH001UD X6 QUICK START GUIDE A17F1UH 1EMN27480A X7 REGISTRATION CARD (EMERSON) A17N1UH 1EMN27763

BLACK

RED

WAC1720LW006

WX1A17F1T207

2011/12/05 14-18 A17F1CA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A17F1MMA-008-DM FUNCTION CBA UNIT A17F1MMA-008-FN IR SENSOR CBA UNIT A17F1MMA-008-IR

A17F1MMA-008

POWER SUPPLY CBA A17F1MPWA002 CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001

2011/12/05 14-19 A17F1EL.fm

TYPE A

PARTS LIST [LC320EM2 (Serial No.: DS4)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

A1 FRONT CABINET A17F1UH 1EM027005B A12# RATING LABEL A17F1UH ---------A42 ENERGY GUIDE LABEL A17F1UH ---------AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B11 SPEAKER HOLDER A17F1UH 1EM126473 B27 Not used B63 Not used B64 Not used B66 Not used B67 Not used B72 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

L42 SHOULDER SCREW A01Q0UF 1EM328277 SP3801 SPEAKER MAGNETIC S0412F28E DS08130XQ004 SP3802 SPEAKER MAGNETIC S0412F28E DS08130XQ004 S1 CARTON A17F1UH 1EM330221A X2# OWNERS MANUAL A17F1UH 1EMN27479B X3 REMOTE CONTROL NH001UD NH001UD X6 QUICK START GUIDE A17F1UH 1EMN27480A X7 REGISTRATION CARD (EMERSON) A17N1UH 1EMN27763

BLACK

RED

WAC1720LW006

WX1A17F1T207

2011/12/05 14-20 A17F1(DS4)CA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A17F1MMA-008-DM FUNCTION CBA UNIT A17F1MMA-008-FN IR SENSOR CBA UNIT A17F1MMA-008-IR

A17F1MMA-008

POWER SUPPLY CBA A17F1MPWA002

C600# CAP METALLIZED FILM 0.47µF/250V/K/

C601# CAP METALLIZED FILM 0.47µF/250V/K/

C602 CAP ELECTROLYTIC 390µF/200V CEB391DYG006 C603 Not used C604 Not used CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001 R208 Not used R210 Not used R213 Not used R247 RES CHIP 1608 1/10W J 100k Ω RRXA104HH013 R605 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R606 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R633 Not used R634 Not used R642 RES CHIP 1608 1/10W F 75.0k Ω RTW7502HH008 R660 Not used R1101 Not used R1110 Not used R1113 Not used R1122 Not used R1125 Not used R1134 Not used R1214 Not used R1229 Not used FH601 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 FH602 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 JS200 Not used JS1200 Not used

MPX

CTA474EUR001

2011/12/05 14-21 A17F1(DS4)EL.fm

TYPE A

PARTS LIST [LC320EM2 (Serial No.: DS5)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

A1 FRONT CABINET A17F1UH 1EM027005B A12# RATING LABEL A17F1UH ---------A15 Not used A42 ENERGY GUIDE LABEL A17F1UH ---------AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B11 SPEAKER HOLDER A17F1UH 1EM126473 B27 Not used B63 Not used B64 Not used B66 Not used B67 Not used B72 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

L42 SHOULDER SCREW A01Q0UF 1EM328277 LCD1 LCD MODULE 31.5INCH 31.5INCH UK32MXJ SP3801 SPEAKER MAGNETIC S0412F28E DS08130XQ004 SP3802 SPEAKER MAGNETIC S0412F28E DS08130XQ004 S1 CARTON A17FNUH 1EM436599A X2# OWNERS MANUAL A17FNUH 1EMN28740A X3 REMOTE CONTROL NH001UD NH001UD X4 BATTERY DRY R03(SIZE AAA ) XB00M0RKT001 X6 QUICK START GUIDE A17F1UH 1EMN27480A X7 REGISTRATION CARD (EMERSON) A17N1UH 1EMN27763

BLACK

RED

WAC1720LW006

WX1A17F1T207

2011/12/05 14-22 A17FNCA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A17FNMMA-001-DM FUNCTION CBA UNIT A17FNMMA-001-FN IR SENSOR CBA UNIT A17FNMMA-001-IR

A17FNMMA-001

POWER SUPPLY CBA A17FDMPW-001 C602 CAP ELECTROLYTIC 390µF/200V CEB391DYG006 C603 Not used C604 Not used CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001 R208 Not used R210 Not used R213 Not used R605 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R606 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R633 Not used R634 Not used R642 RES CHIP 1608 1/10W F 75.0k Ω RTW7502HH008 R660 Not used R1101 Not used R1110 Not used R1113 Not used R1122 Not used R1125 Not used R1134 Not used R1214 Not used R1229 Not used FH601 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 FH602 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 JS200 Not used JS1200 Not used

2011/12/05 14-23 A17FNEL.fm

TYPE A

PARTS LIST [LC320EM2 (Serial No.: DS6)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

A1 FRONT CABINET A17F1UH 1EM027005B A12# RATING LABEL A17F1UH ---------A15 Not used A42 ENERGY GUIDE LABEL A17F1UH ---------AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B11 SPEAKER HOLDER A17F1UH 1EM126473 B27 Not used B63 Not used B64 Not used B66 Not used B67 Not used B72 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

CL3102 WIRE ASSEMBLY 7PIN 7PIN/600MM/BLACK

L42 SHOULDER SCREW A01Q0UF 1EM328277 LCD1 LCD MODULE UK32AXG SP3801 SPEAKER MAGNETIC S0412F28E DS08130XQ004 SP3802 SPEAKER MAGNETIC S0412F28E DS08130XQ004 S1 CARTON A17FNUH 1EM436599A X2# OWNERS MANUAL A17FNUH 1EMN28740A X3 REMOTE CONTROL NH001UD NH001UD X4 BATTERY DRY R03(SIZE AAA ) XB00M0RKT001 X6 QUICK START GUIDE A17F1UH 1EMN27480A X7 REGISTRATION CARD (EMERSON) A17N1UH 1EMN27763

BLACK

RED

WAC1720LW006

WX1A17F1T217

WX1A17F1T216

2011/12/05 14-24 A17FTCA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A17FTMMA-002-DM FUNCTION CBA UNIT A17FTMMA-002-FN IR SENSOR CBA UNIT A17FTMMA-002-IR

A17FTMMA-002

Ref. No. Description Part No.

R633 Not used R634 Not used R642 RES CHIP 1608 1/10W F 75.0k Ω RTW7502HH008 R660 Not used R1101 Not used R1110 Not used R1113 Not used R1122 Not used R1125 Not used R1134 Not used R1214 Not used R1229 Not used FH601 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 FH602 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 JS200 Not used JS660 Not used JS1200 Not used

POWER SUPPLY CBA A17F7MPW-001 C602 CAP ELECTROLYTIC 390µF/200V CEB391DYG006 C603 Not used C604 Not used CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001 D205 DIODE ZENER 33BSB-T26 NDTB033BST26 D210 DIODE ZENER 5V1BSB-T26 NDTB5R1BST26 D611 Not used D635 Not used D661 DIODE FAST RECOVERY RS1GJTB ND1Z0RS1GJTB D662 DIODE FAST RECOVERY RS1GJTB ND1Z0RS1GJTB R203 RES CARBON FILM T 1/4W J 1.0k Ω RCX4102T1001 R208 Not used R210 Not used R213 Not used R215 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R216 RES CHIP 1608 1/10W F 1.50k Ω RTW1501HH008 R217 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R218 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R233 RES. CARBON FILM J 1/2W J 8.2 Ω RCX28R2T1003 R234 RES. CARBON FILM J 1/2W J 5.6 Ω RCX25R6T1003 R235 RES. CARBON FILM J 1/2W J 5.6 Ω RCX25R6T1003 R236 RES CHIP 1608 1/10W F 9.10k Ω RTW9101HH008 R237 RES CHIP 1608 1/10W 0 Ω RRXA000HH014 R255 RES CARBON FILM T 1/4W J 150 Ω RCX4151T1001 R257 RES CARBON FILM T 1/4W J 47k Ω RCX4473T1001 R258 RES CARBON FILM T 1/4W J 680 Ω RCX4681T1001 R263 RES CARBON FILM T 1/4W J 270 Ω RCX4271T1001 R268 RES CARBON FILM 1/4W J 39k Ω RCX4393FS002 R605 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R606 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001

2011/12/05 14-25 A17FTEL.fm

TYPE A

PARTS LIST [LC320EM2 (Serial No.: DS7)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

A1 FRONT CABINET A17F1UH 1EM027005B A12# RATING LABEL A17F1UH ---------A15 Not used A42 ENERGY GUIDE LABEL A17F1UH ---------AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B11 SPEAKER HOLDER A17F1UH 1EM126473 B27 Not used B63 Not used B64 Not used B66 Not used B67 Not used B72 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

CL3102 WIRE ASSEMBLY 7PIN 7PIN/600MM/BLACK

L42 SHOULDER SCREW A01Q0UF 1EM328277 LCD1 LCD MODULE UK32AXK SP3801 SPEAKER MAGNETIC S0412F28E DS08130XQ004 SP3802 SPEAKER MAGNETIC S0412F28E DS08130XQ004 S1 CARTON A17FNUH 1EM436599A X2# OWNERS MANUAL A17FNUH 1EMN28740A X3 REMOTE CONTROL NH001UD NH001UD X4 BATTERY DRY R03(SIZE AAA ) XB00M0RKT001 X6 QUICK START GUIDE A17F1UH 1EMN27480A X7 REGISTRATION CARD (EMERSON) A17N1UH 1EMN27763

BLACK

RED

WAC1720LW006

WX1A17F1T217

WX1A17F1T216

2011/12/05 14-26 A1AF5CA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A1AF5MMA-001-DM FUNCTION CBA UNIT A1AF5MMA-001-FN IR SENSOR CBA UNIT A1AF5MMA-001-IR

A1AF5MMA-001

Ref. No. Description Part No.

R263 RES CARBON FILM T 1/4W J 270 Ω RCX4271T1001 R268 RES CARBON FILM 1/4W J 39k Ω RCX4393FS002 R605 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R606 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R633 Not used R634 Not used R642 RES CHIP 1608 1/10W F 75.0k Ω RTW7502HH008 R660 Not used R1101 Not used R1110 Not used R1113 Not used R1122 Not used R1125 Not used R1134 Not used R1214 Not used R1229 Not used FH601 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 FH602 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 JS200 Not used JS660 Not used JS1200 Not used

POWER SUPPLY CBA A17F7MPW-001 C602 CAP ELECTROLYTIC 390µF/200V CEB391DYG006 C603 Not used C604 Not used CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001 D205 DIODE ZENER 33BSB-T26 NDTB033BST26 D210 DIODE ZENER 5V1BSB-T26 NDTB5R1BST26 D611 Not used D635 Not used D661 DIODE FAST RECOVERY RS1GJTB ND1Z0RS1GJTB D662 DIODE FAST RECOVERY RS1GJTB ND1Z0RS1GJTB Q1700# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 Q1701# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 Q1702# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 Q1703# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 R203 RES CARBON FILM T 1/4W J 1.0k Ω RCX4102T1001 R208 Not used R210 Not used R213 Not used R215 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R216 RES CHIP 1608 1/10W F 1.50k Ω RTW1501HH008 R217 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R218 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R233 RES. CARBON FILM J 1/2W J 8.2 Ω RCX28R2T1003 R234 RES. CARBON FILM J 1/2W J 5.6 Ω RCX25R6T1003 R235 RES. CARBON FILM J 1/2W J 5.6 Ω RCX25R6T1003 R236 RES CHIP 1608 1/10W F 9.10k Ω RTW9101HH008 R237 RES CHIP 1608 1/10W 0 Ω RRXA000HH014 R255 RES CARBON FILM T 1/4W J 150 Ω RCX4151T1001 R257 RES CARBON FILM T 1/4W J 47k Ω RCX4473T1001 R258 RES CARBON FILM T 1/4W J 680 Ω RCX4681T1001

2011/12/05 14-27 A1AF5EL.fm

TYPE A

PARTS LIST [LC320SS2 (Serial No.: DS1)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No. : DS1)

Ref. No. Description Part No.

A1 FRONT CABINET A17F2UH 1EM226004B A12# RATING LABEL A17F2UH ---------A42 ENERGY GUIDE LABEL A17F2UH ---------S1 CARTON A17F2UH 1EM434846 X2# OWNERS MANUAL A17F2UH 1EMN27703A X3 REMOTE CONTROL NH210UD NH210UD X6 QUICK START GUIDE A17F2UH 1EMN27704 X7 REGISTRATION CARD (SYLVANIA) A017DUH 1EMN27080

2011/12/05 14-28 A17F2CA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No. : DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A17F2MMA-004-DM FUNCTION CBA UNIT A17F2MMA-004-FN IR SENSOR CBA UNIT A17F2MMA-004-IR

A17F2MMA-004

2011/12/05 14-29 A17F2EL.fm

TYPE A

PARTS LIST [LC320SS2 (Serial No.: DS2)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

A1 FRONT CABINET A17F2UH 1EM226004B A12# RATING LABEL A17F2UH ---------A42 ENERGY GUIDE LABEL A17F2UH ---------AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B63 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

S1 CARTON A17F2UH 1EM434846 X2# OWNERS MANUAL A17F2UH 1EMN27703A X3 REMOTE CONTROL NH210UD NH210UD X6 QUICK START GUIDE A17F2UH 1EMN27704 X7 REGISTRATION CARD (SYLVANIA) A017DUH 1EMN27080

BLACK

RED

WAC1720LW006

WX1A17F1T207

2011/12/05 14-30 A17F2CA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A17F2MMA-004-DM FUNCTION CBA UNIT A17F2MMA-004-FN IR SENSOR CBA UNIT A17F2MMA-004-IR

A17F2MMA-004

POWER SUPPLY CBA A17F1MPWA002 CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001

2011/12/05 14-31 A17F2EL.fm

TYPE A

PARTS LIST [LC320SS2 (Serial No.: DS3)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

A1 FRONT CABINET A17F2UH 1EM226004B A12# RATING LABEL A17F2UH ---------A42 ENERGY GUIDE LABEL A17F2UH ---------AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B11 SPEAKER HOLDER A17F1UH 1EM126473 B27 Not used B63 Not used B64 Not used B66 Not used B67 Not used B72 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

L42 SHOULDER SCREW A01Q0UF 1EM328277 SP3801 SPEAKER MAGNETIC S0412F28E DS08130XQ004 SP3802 SPEAKER MAGNETIC S0412F28E DS08130XQ004 S1 CARTON A17F2UH 1EM434846 X2# OWNERS MANUAL A17F2UH 1EMN27703A X3 REMOTE CONTROL NH210UD NH210UD X6 QUICK START GUIDE A17F2UH 1EMN27704 X7 REGISTRATION CARD (SYLVANIA) A017DUH 1EMN27080

BLACK

RED

WAC1720LW006

WX1A17F1T207

2011/12/05 14-32 A17F2(DS3)CA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No.: DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A17F2MMA-004-DM FUNCTION CBA UNIT A17F2MMA-004-FN IR SENSOR CBA UNIT A17F2MMA-004-IR

A17F2MMA-004

POWER SUPPLY CBA A17F1MPWA002 C600# CAP METALLIZED FILM 0.47µF/250V/K/MPX CTA474EUR001 C601# CAP METALLIZED FILM 0.47µF/250V/K/MPX CTA474EUR001 C602 CAP ELECTROLYTIC 390µF/200V CEB391DYG006 C603 Not used C604 Not used CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001 R208 Not used R210 Not used R213 Not used R247 RES CHIP 1608 1/10W J 100k Ω RRXA104HH013 R605 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R606 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R633 Not used R634 Not used R642 RES CHIP 1608 1/10W F 75.0k Ω RTW7502HH008 R660 Not used R1101 Not used R1110 Not used R1113 Not used R1122 Not used R1125 Not used R1134 Not used R1214 Not used R1229 Not used FH601 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 FH602 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 JS200 Not used JS1200 Not used

2011/12/05 14-33 A17F2(DS3)EL.fm

TYPE A

PARTS LIST [LC320EM2F (Serial No.: DS1, DS3)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No. : DS1)

Ref. No. Description Part No.

A1 FRONT CABINET A17FDUH 1EM226523 A12# RATING LABEL A17FDUH ---------A42 ENERGY GUIDE LABEL A17FDUH ---------AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B11 SPEAKER HOLDER A17F1UH 1EM126473 B27 Not used B63 Not used B64 Not used B66 Not used B67 Not used B72 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

L42 SHOULDER SCREW A01Q0UF 1EM328277 LCD1 LCD MODULE 31.5INCH UK32MXJ SP3801 SPEAKER MAGNETIC S0412F28E DS08130XQ004 SP3802 SPEAKER MAGNETIC S0412F28E DS08130XQ004 S1 CARTON A17FDUH 1EM436280 X2# OWNERS MANUAL A17FDUH 1EMN28599 X3 REMOTE CONTROL NH001UD NH001UD X6 QUICK START GUIDE A17F1UH 1EMN27480A X7 REGISTRATION CARD (EMERSON) A17N1UH 1EMN27763

BLACK

RED

WAC1720LW006

WX1A17F1T207

2011/12/05 14-34 A17FDCA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No. : DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following:

DIGITAL MAIN CBA UNIT A17FDMMA-003-DM FUNCTION CBA UNIT A17FDMMA-003-FN IR SENSOR CBA UNIT A17FDMMA-003-IR

A17FDMMA-003

POWER SUPPLY CBA A17FDMPW-001 C602 CAP ELECTROLYTIC 390µF/200V CEB391DYG006 C603 Not used C604 Not used CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001 R208 Not used R210 Not used R213 Not used R605 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R606 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R633 Not used R634 Not used R642 RES CHIP 1608 1/10W F 75.0k Ω RTW7502HH008 R660 Not used R1101 Not used R1110 Not used R1113 Not used R1122 Not used R1125 Not used R1134 Not used R1214 Not used R1229 Not used JS200 Not used JS1200 Not used

2011/12/05 14-35 A17FDEL.fm

TYPE A

PARTS LIST [LC320EM2F (Serial No.: DS2, DS4)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No. : DS1)

Ref. No. Description Part No.

A1 FRONT CABINET A17FDUH 1EM226523 A12# RATING LABEL A17FDUH ---------A42 ENERGY GUIDE LABEL A17FDUH ---------AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B11 SPEAKER HOLDER A17F1UH 1EM126473 B27 Not used B63 Not used B64 Not used B66 Not used B67 Not used B72 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

L42 SHOULDER SCREW A01Q0UF 1EM328277 LCD1 LCD MODULE UK32AXG SP3801 SPEAKER MAGNETIC S0412F28E DS08130XQ004 SP3802 SPEAKER MAGNETIC S0412F28E DS08130XQ004 S1 CARTON A17FDUH 1EM436280 X2# OWNERS MANUAL A17FDUH 1EMN28599 X3 REMOTE CONTROL NH001UD NH001UD X6 QUICK START GUIDE A17F1UH 1EMN27480A X7 REGISTRATION CARD (EMERSON) A17N1UH 1EMN27763

BLACK

RED

WAC1720LW006

WX1A17F1T207

2011/12/05 14-36 A17FECA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No. : DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following:

DIGITAL MAIN CBA UNIT A17FEMMA-001-DM FUNCTION CBA UNIT A17FEMMA-001-FN IR SENSOR CBA UNIT A17FEMMA-001-IR

A17FEMMA-001

Ref. No. Description Part No.

R633 Not used R634 Not used R642 RES CHIP 1608 1/10W F 75.0k Ω RTW7502HH008 R660 Not used R1101 Not used R1110 Not used R1113 Not used R1122 Not used R1125 Not used R1134 Not used R1214 Not used R1229 Not used FH601 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 FH602 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 JS200 Not used JS1200 Not used

POWER SUPPLY CBA A17F7MPW-001 C602 CAP ELECTROLYTIC 390µF/200V CEB391DYG006 C603 Not used C604 Not used CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001 D205 DIODE ZENER 33BSB-T26 NDTB033BST26 D210 DIODE ZENER 5V1BSB-T26 NDTB5R1BST26 D661 DIODE FAST RECOVERY RS1GJTB ND1Z0RS1GJTB D662 DIODE FAST RECOVERY RS1GJTB ND1Z0RS1GJTB R203 RES CARBON FILM T 1/4W J 1.0k Ω RCX4102T1001 R208 Not used R210 Not used R213 Not used R215 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R216 RES CHIP 1608 1/10W F 1.50k Ω RTW1501HH008 R217 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R218 RES CHIP 1608 1/10W F 10.0k Ω RTW1002HH008 R233 RES. CARBON FILM J 1/2W J 8.2 Ω RCX28R2T1003 R234 RES. CARBON FILM J 1/2W J 5.6 Ω RCX25R6T1003 R235 RES. CARBON FILM J 1/2W J 5.6 Ω RCX25R6T1003 R236 RES CHIP 1608 1/10W F 9.10k Ω RTW9101HH008 R237 RES CHIP 1608 1/10W 0 Ω RRXA000HH014 R255 RES CARBON FILM T 1/4W J 150 Ω RCX4151T1001 R257 RES CARBON FILM T 1/4W J 47k Ω RCX4473T1001 R258 RES CARBON FILM T 1/4W J 680 Ω RCX4681T1001 R263 RES CARBON FILM T 1/4W J 270 Ω RCX4271T1001 R268 RES CARBON FILM 1/4W J 39k Ω RCX4393FS002 R605 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R606 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001

2011/12/05 14-37 A17FEEL.fm

TYPE A

PARTS LIST [CLC320EM2F (Serial No.: DS1)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No. : DS1)

Ref. No. Description Part No.

A1 FRONT CABINET A17FDUH 1EM227004 A12# RATING LABEL A17FWCH ---------A15 Not used A42 Not used AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B11 SPEAKER HOLDER A17F1UH 1EM126473 B27 Not used B63 Not used B64 Not used B66 Not used B67 Not used B72 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

CL3102 WIRE ASSEMBLY 7PIN 7PIN/600MM/BLACK

L42 SHOULDER SCREW A01Q0UF 1EM328277 LCD1 LCD MODULE 31.5INCH 31.5INCH UK32MXJ SP3801 SPEAKER MAGNETIC S0412F28E DS08130XQ004 SP3802 SPEAKER MAGNETIC S0412F28E DS08130XQ004 S1 CARTON A17FWCH 1EM436899 X2# OWNERS MANUAL A17FWCH 1EMN28919 X3 REMOTE CONTROL NH001UD NH001UD X6 QUICK START GUIDE A17F1UH 1EMN27480A X7 REGISTRATION CARD (EMERSON) A17N1UH 1EMN27763

BLACK

RED

WAC1720LW006

WX1A17F1T217

WX1A17F1T216

2011/12/05 14-38 A17FWCA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No. : DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A17FDMMA-003-DM FUNCTION CBA UNIT A17FDMMA-003-FN IR SENSOR CBA UNIT A17FDMMA-003-IR

A17FDMMA-003

POWER SUPPLY CBA A17FDMPW-001 C602 CAP ELECTROLYTIC 390µF/200V CEB391DYG006 C603 Not used C604 Not used CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001 D611 Not used D635 Not used Q1700# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 Q1701# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 Q1702# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 Q1703# FET MOS SMD TK40P04M1(T6RSS-Q) QF1ZK40P04M1 R208 Not used R210 Not used R213 Not used R605 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R606 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R633 Not used R634 Not used R642 RES CHIP 1608 1/10W F 75.0k Ω RTW7502HH008 R660 Not used R1101 Not used R1110 Not used R1113 Not used R1122 Not used R1125 Not used R1134 Not used R1214 Not used R1229 Not used FH601 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 FH602 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 JS200 Not used JS1200 Not used

2011/12/05 14-39 A17WCEL.fm

TYPE B

PARTS LIST [32MF301B/F7 (Serial No.: TH1)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No. : DS1)

Ref. No. Description Part No.

STAND ASSEMBLY A17F8UT 1ESA28630 A12# RATING LABEL A17FAUT ---------AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B11 SPEAKER HOLDER A17F1UH 1EM126473 B27 Not used B63 Not used B64 Not used B66 Not used B67 Not used B72 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

L28 STAND SCREW KIT A17F8UT 1ESA28631 L42 SHOULDER SCREW A01Q0UF 1EM328277 SP3801 SPEAKER MAGNETIC S0412F28E DS08130XQ004 SP3802 SPEAKER MAGNETIC S0412F28E DS08130XQ004 S1 CARTON A17FAUT 1EM435775 S7 STAND BAG A01FKUT 1EM432498 X2# OWNERS MANUAL A17FAUT 1EMN28323 X6 QUICK START GUIDE A17FAUT 1EMN28324 X7 REGISTRATION CARD (MAGNAVOX)

BLACK

RED

A17N7UT

WAC1720LW006

WX1A17F1T207

1EMN27760

2011/12/05 14-40 A17FACA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No. : DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A17FAMMA-002-DM FUNCTION CBA UNIT A17FAMMA-002-FN IR SENSOR CBA UNIT A17FAMMA-002-IR

A17FAMMA-002

POWER SUPPLY CBA A17F8MPW-001 C602 CAP ELECTROLYTIC 390µF/200V CEB391DYG006 C603 Not used C604 Not used CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001 R247 RES CHIP 1608 1/10W J 100K Ω RRXA104HH013 B41 HEAT SINK PNB ASSEMBLY A01FNUT 1EM432598

2011/12/05 14-41 A17FAEL.fm

TYPE B

PARTS LIST [32MF301B/F7 (Serial No.: ME1)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model 32MF301B/F7 (Serial No. : DS1)

Ref. No. Description Part No.

STAND ASSEMBLY A17F8UT 1ESA28630 A12# RATING LABEL A17FAUT ---------A15 Not used AC600# AC CORD W/O A GND WIRE UL/CSA/1730/NO/

B11 SPEAKER HOLDER A17F1UH 1EM126473 B27 Not used B63 Not used B64 Not used B66 Not used B67 Not used B72 Not used CL3101 WIRE ASSEMBLY 2PIN 2PIN/250MM/BLACK

CL3102 WIRE ASSEMBLY 7PIN 7PIN/600MM/BLACK

L28 STAND SCREW KIT A17F8UT 1ESA28631 L42 SHOULDER SCREW A01Q0UF 1EM328277 LCD1 LCD MODULE 31.5INCH WIDE CMI 31.5INCH UK32MXG SP3801 SPEAKER MAGNETIC S0412F28E DS08130XQ004 SP3802 SPEAKER MAGNETIC S0412F28E DS08130XQ004 S1 CARTON A17FJUT 1EM436627 S7 STAND BAG A01FKUT 1EM432498 X2# OWNERS MANUAL A17NCUT 1EMN28746 X4 BATTERY DRY R03(SIZE AAA ) XB00M0RKT001 X6 QUICK START GUIDE A17FJUT 1EMN28879 X7 REGISTRATION CARD (MAGNAVOX)

BLACK

RED

A17N7UT

WAC1720LW006

WX1A17F1T217

WX1A17F1T216

1EMN27760

2011/12/05 14-42 A17FJCA.fm

Electrical Parts

PRODUCT SAFETY NOTE: Products marked with a

# have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%

Different parts from the original model 32MF301B/F7 (Serial No. : DS1)

Ref. No. Description Part No.

DIGITAL ASSEMBLY Consists of the following

DIGITAL MAIN CBA UNIT A17FJMMA-001-DM FUNCTION CBA UNIT A17FJMMA-001-FN IR SENSOR CBA UNIT A17FJMMA-001-IR

A17FJMMA-001

POWER SUPPLY CBA A17F8MPW-001 C602 CAP ELECTROLYTIC 390µF/200V CEB391DYG006 C603 Not used C604 Not used CN600# Not used CN601# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001 D611 Not used D635 Not used R605 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R606 RES CARBON FILM T 1/4W J 120 Ω RCX4121T1001 R642 RES CHIP 1608 1/10W F 75.0k Ω RTW7502HH008 B41 HEAT SINK PNB ASSEMBLY A01FNUT 1EM432598 FH601 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001 FH602 FUSE HOLDER MSF-015-RS-SN (B110) XH001Z0LY001

2011/12/05 14-43 A17FJEL.fm

Emerson LC320EM2F, 32MF301B/F7, LC320EM2, LC320SS2, CLC320EM2F Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual