Emerson FP-40R Brochures and Data Sheets

Industrial Power for

Business-Critical Continuity

™

Chloride FP-40R

Rectier - battery charger

The Chloride FP-40R industrial rectier

is the result of engineering research

in product simplication to offer an

SCR-based standardized design with
improved reliability and adaptability
to industrial requirements.

The Chloride FP range is designed to
meet the most demanding schedules of

industrial projects.

Each Chloride FP product includes a wide
choice of ratings and a selection of indus-

trialized and pre-congured options to
allow the product to be quickly congu­red and delivered.

Benets

 Improved reliability provided by a fully

controlled SCR bridge and a reduced quan­tity of components

 Adaptability thanks to a selection of

industrialized options and an easy parameter
settings for quick on-site adjustments

 Simplicity of the product design to improve

MTBF and to reduce MTTR

Key Features

 Low Ripple Voltage to optimize battery life
 Low inrush current < 8In not to oversize

mains power supply (3-phase)

 Compact design with the capability to inte-

grate the battery in the charger cabinet

 Human-Machine Interface (HMI) choice

to deliver appropriate information level to
the user

 Ingress protection up to IP55 for harsh

environmental conditions

 Compatibility with Nickel-Cadmium and

Lead-Acid batteries, open or gas-recombina-

tion types

 Galvanic isolation between input and output
 Digital control and monitoring
 Wide choice of congurations and options

Flexibility for a wide scope of DC applications

The Chloride FP-40R is available from 25A to 100A in single-phase input

conguration, and up to 400A in three-phase input conguration. It offers a
wide range of output voltages, from 24 Vdc to 220 Vdc.

The Chloride FP-40R is suitable for use either as a battery charger, a rectier
or as a DC power supply. It features a microprocessor control which offers

exceptional stability and allows adaptability for different application require-

ments.

To further improve load availability and process reliability, the
Chloride FP-40R is able to operate in dual parallel conguration.

Applications

The Chloride FP-40R suits all DC applications
requiring large battery back-up of the following
industries:

 Power Transmission and Distribution
 Continuous process industries
 Petrochemical and Chemical industries
 Water & Wastewater industries

Industrial Power for

Business-Critical Continuity

™

Chloride FP-40R

Emerson Network Power.

The global leader in enabling

Business-Critical Continuity™.

Emerson, Business-Critical Continuity and

Emerson Network Power are trademarks of

Emerson Electric Co. or one of its afliated companies.

©2013 Emerson Electric Co.

FP40R-DSUK-Rev1-01/2013

AC Power

Connectivity

DC Power

Infrastructure Management & Monitoring

Outside Plant

Power Switching & Controls

Embedded Computing

Embedded Power

Industrial Power

Precision Cooling

Racks & Integrated Cabinets

Services

While every precaution has been taken to ensure the accuracy and completeness of this literature, Emerson Network Power assumes no responsability and disclaims all liability for damages resulting from use of this information or for any errors or omissions.

Emerson Network Power IS S.A.S

30 avenue Montgoler - BP90 - 69684 Chassieu Cedex - France
T: [phone] F: [phone]

[e-mail]
EmersonNetworkPower.com

Rectier - battery charger

Ratings - Output Current (A) vs Output Voltage (Vdc)

Ratings with single-phase input:

Ratings with three-phase input:

Technical Data

Input

Model FP-40R10 (Single-phase) FP-40R30 (Three-phase)

Input voltage (other voltage on request) 230 VAC ±10% 400 VAC ±10%
Inrush current < 15In < 8In

Power factor 0.7 (typical) 0.8 (typical)
Frequency range From 47 to 63 Hz

Output

Available ratings (see table above) 25 to 100 A 35 to 400 A
Nominal DC voltage 24, 48, 110, 125, 220 VDC
Static regulation 0.5 %
Ripple voltage (disconnected battery) < 0.7 %
Float voltage range From 0.70 Un to 1.47 Un
Charge voltage range From 0.73 Un to 1.60 Un
Equalization voltage range From 0.83 Un to 1.70 Un

Battery

Typ e Lead Acid or Nickel Cadmium, vented or recombination
Autonomy From few minutes to several hours, as required

General Data

Rectier efciency From 83 % to 94 % (according to model)

Operating temperature From 0 to 40 °C
Storage temperature From -20 °C to +70 °C (battery excluded)
Relative humidity <95 % non condensing at 20 °C
Operating altitude 1000 m (without system derating)
Cooling Fan-assisted
External ingress protection IP 20
Noise <60 dB

Input / output isolation 2500 VAC / 1 minute

Frame colour RAL 7035
Dimensions Varying according to ratings and options (consult us)

Options

Charger Paralleling diode

Battery Protection against battery reversed polarity

Mechanical External ingress protection IP21, 23, 40, 41, 43, 55

Load Distribution board (circuit breaker with or without contact)

Standards

Compliance IEC 61000-6-4 - IEC 61000-6-2 - IEC 61000-6-4

Conformity EMC Directive 2004/108/CE

24Vdc 48Vdc 110-125Vdc 220Vdc

- - 25 25

- 40 40

- 60 60
100 100 100

- - 35 35

- 65 65 65
100 100 100 100

160 160 160 160

220 220 220 220
300 300 300 300
400 400 400 400

Dropping diode
DC earth fault monitor

Ultra low ripple voltage <0.1%
Isolated communication interface, RS 485, Modbus

Front panel LEDs status annunciator

Battery Low Voltage Disconnection (LVD)

Batteries in charger cabinet (on shelves or drawers)
Temperature sensor for battery charge compensation

Space heater

Input / output terminal wiring
Internal ingress protection with open door IP20
Internal lighting

Lifting eyes

IEC 60146 - IEC 60439-1 - NFC 58-311

Low voltage Directive (LVD) 2006/95/CE