Counter-Depth Refrigerator
E23CS78HSS designer series
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
USA
•
250 Bobby Jones Expressway •Augusta, GA 30907 •1-877-4electrolux (1-877-435-3287)
•
electroluxicon.com
CANADA
•
5855 Terry Fox Way •Mississauga, ON L5V 3E4 •1-800-265-8352
•
electroluxicon.ca
E23CS78HSS 01/10 © 2010 Electrolux Home Products, Inc. Printed in the U.S.A.
Counter-Depth Refrigerator Specifications
•
Product Weight – 300 Lbs.
•
Voltage Rating –120V / 60 Hz / 15 or 20 Amps
•
Connected Load (kW Rating) @120 Volts = 1.02kW
(For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.)
•
Amps @120 Volts = 8.5 Amps
•
Always consult local and national electric & plumbing codes.
•
When installing next to wall allow 3-1/2" handle clearance.
•
Floor should be level surface of hard material, capable of supporting fully
loaded refrigerator.
•
When installing refrigerator adjacent to wall, cabinet or other appliance
that extends beyond front edge of unit, 20" minimum clearance
recommended to allow for optimum 120° to 180° door swing, providing
complete drawer/crisper access and removal. (Absolute 4-1/2" minimum
clearance will ONLY allow for 90°door swing which will provide
drawer/crisper access with restricted removal.)
•
To ensure optimum performance, avoid installing in direct sunlight or
close proximity to range, dishwasher or other heat source.
•
For proper ventilation, front grille MUST remain unobstructed.
•
Recess electrical outlet when possible.
•
Water recess on rear wall recommended to prevent water line damage.
•
Water Pressure – Cold water line must provide between 30 and 100
pounds per square inch (psi).
•
Copper tubing with 1/4" O.D. recommended for water supply line
with length equal to distance from rear of unit to household water supply
line plus 7 additional feet. Optional Water Supply Installation Kits available.
•
Adjustable front rollers to assist with door alignment.
•
If optional Collar Kit (PN# ECK23CDS) is to be used, different cutout
dimensions are required. (Refer to Collar Kit ECK23CDS Installation
Specifications page on web.)
•
If optional Louvered Trim Kit (PN# 4480) is to be used, different cutout
dimensions are required. (Refer to Louvered Trim Kit 4480 Installation
Specifications page on web.)
“Built-In Look” Specifications
•
Minimum opening of 70-1/4"H x 36"W x 25"D required to allow for ease
of installation, proper air circulation, and plumbing/ electrical connections.
•
Remove all wall/floor molding prior to installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
Optional Accessories
•
Collar Kit – (PN# ECK23CDS).
•
Louvered Trim Kit – (PN# 4480).
B
C
A
“Built-In Look” Cutout Dimensions
(A) 701/4" (B) 36" (C) 25"
Standard
Refrigerator Depth
vs. Counter Depth
23
5
/8"
Counter Depth
281/2"
Standard Depth
267/8"
23
5
/8"
35
5
/8"
68
3
/16"
with
3
/8"
rollers
69
5
/16"
Allow at least 451/4" with
doors in 90° open position
293/8" to handle
extension
75/8"
Power
cord
location
(right
bottom
rear)
Water
line inlet
location
(left
bottom
rear)
Top View
24"
Cabinet
25"
Countertop
Recessed
water line
Recessed
electrical outlet
25" Side Panels, 1/2" min. width
Allow 1" min. clearance at rear
for proper air circulation and
water/electrical connections