Edgestar CWR461DZ Owner’s Manual

Built-in Wine Refrigerator

Owner’s Manual

For more information on other great EdgeStar products on the web, go to http://www.edgestar.com

CWR461DZ

Important Safety Information

Electrical Safety

Do not bypass, cut or remove the grounding plug.

Contact customer service for service options if the

General Safety

least two people to move and install the wine cooler.

Do not place any other appliances on top of the unit.

Improper handling can cause serious damage to the EdgeStar wine refrigerator and/or injury to the user. This wine
refrigerator is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other
use may invalidate the warranty. Please review the ratings label located on the rear panel of the unit for electrical and
other technical data related to this unit. The unit must be used in a properly grounded wall outlet.

Please read and follow the safety information listed below to reduce the risk of fire, electric shock or injury.

 Do not exceed the power outlet ratings.
 It is recommended the wine refrigerator be

connected on its own circuit.

 The unit must be installed in accordance with

state and local electrical codes.

 A standard electrical supply (115 V, 60Hz), that is

properly grounded in accordance with the
National Electrical Code and local codes and
ordinances is required.

 Use outlets that cannot be turned off by a switch

or pull chain.

 Always turn the unit off and unplug it from the

outlet when cleaning.

 Unplug the unit if it is not going to be used for an

extended period of time.

 Do not operate the unit with a power plug missing

the ground plug, a damaged cord or a loose
socket.

 Be sure the wine refrigerator is properly

grounded.

 Never plug or unplug the unit with wet hands.



 Do not use extension cords or power strips with

this unit. You may need to contact your electrician
if it is necessary to use a longer cord or if you do
not have a grounded outlet. Do not modify the
power cord’s length or share the outlet with other
appliances.

 Do not start or stop the unit by switching the

circuit’s power on and off.

 If the power cord is damaged, it must be replaced

by the manufacturer or a qualified technician.

 Never repair the unit while it is plugged in.
 Immediately unplug the unit if it makes strange

sounds, emits smells or smoke comes out of it,
and contact customer service.

 Do not remove any part of the casing unless

instructed by an authorized technician.

 You should never attempt to repair the unit

yourself.



unit needs service.

 To prevent back and other types of injuries, use at
 This appliance is not intended for use by persons,

including children, with reduced physical, sensory or
mental capabilities, unless they have been given
supervision or instruction concerning the use of the
appliance by the person(s) responsible for their
safety.

 Install the wine refrigerator in a well ventilated area

where the ambient temperature is above 50°F and
below 95°F.

 The temperature range for this cooler is optimized

for wine and beverage storage. Perishable food
items may require a different storage environment.

 Do not place hot or warm items into the cooler

before they cool down to room temperature.

 This unit is designed to be installed indoors, and

protected from rain, sleet, snow, and/or moisture.

 This unit is not intended to be used by children.
 Children should be supervised to ensure that they

do not play with this product.

 Never allow children to crawl inside the wine

refrigerator. If disposing the unit, remove the door.

 Do not use this appliance near flammable gas or

combustibles, such as gasoline, benzene, thinner,
etc.

 Do not place the unit near heat sources such as

ovens, grills, or direct sunlight.

 Only use in an upright position on a flat, level

surface and provide proper ventilation.

 Do not pinch or kink the power supply line between

the unit and cabinet.

 Do not leave any cleaning solutions in the unit
 Do not use solvent-based cleaning agents or

abrasive solutions to clean the unit as they may
damage the interior and exterior.



 Do not turn the unit upside down, on its side, or at

an angle off level.

 If your model wine cooler is equipped with a lock,

take care to keep the keys away from children.

 Do not move the unit without emptying the contents

and securing the door in a closed position.

i

Table of Contents

IMPORTANT SAFETY INFORMATION ................................................................. I

INTRODUCTION ................................................................................................... 1

PARTS IDENTIFICATION ..................................................................................... 2

BACK VIEW .......................................................................................................... 2

FRONT VIEW ........................................................................................................ 2

INSTALLING THE WINE REFRIGERATOR ......................................................... 3

TYPES OF INSTALLATION....................................................................................... 3

Free-standing installation: ............................................................................. 3

Built-in installation: ........................................................................................ 3

INSTALLATION CLEARANCE REQUIREMENTS .......................................................... 4

ELECTRICAL REQUIREMENTS ................................................................................ 5

Recommended grounding method ................................................................ 5

LEVELING THE WINE REFRIGERATOR .................................................................... 5

INSTALLING THE DOOR HANDLE ............................................................................ 6

INSTALLING AND REMOVING THE SHELVES ............................................................ 6

REVERSING THE DOOR SWING .............................................................................. 7

REMOVING AND INSTALLING DECORATIVE PLUGS .................................................. 8

OPERATION .......................................................................................................... 9

USING THE TEMPERATURE CONTROL PANEL ......................................................... 9

NORMAL SOUNDS .............................................................................................. 10

DEFROSTING ..................................................................................................... 10

PREPARING THE WINE REFRIGERATOR FOR STORAGE ......................................... 10

CLEANING AND MAINTENANCE ...................................................................... 11

EXTERIOR CLEANING ......................................................................................... 11

INTERIOR CLEANING ........................................................................................... 11

TROUBLESHOOTING ........................................................................................ 11

TROUBLESHOOTING CONTINUED ......................................................................... 12

SPECIFICATIONS ............................................................................................... 13

First Time Operating Instructions
Before use, make sure all packaging labels and materials are all removed from

the unit. Be sure to keep track of all included parts and pieces before discarding
packaging materials. It is advised that you keep the original box and packaging
materials in case you are ever to move or ship the appliance in the future.

Let the unit stand for at least 24 hours before you use it; this allows the cooling
components time to settle from transit. The instruction manual should be read
before use.

This owner’s manual is provided for reference use only. Specifications may

change without prior notice. Refer to the product label on the back of your
wine refrigerator for the latest technical information.

EdgeStar Wine Refrigerator ii

Introduction

Thank you for purchasing this EdgeStar wine refrigerator. We are glad you chose
us. We believe that your purchase of this product opens a relationship between
you and EdgeStar. We will provide the customer support needed to nurture that
relationship.

This manual contains important information regarding the proper installation, use
and maintenance of your wine refrigerator. Following this manual will ensure that
your product will work at its peak performance and efficiency.

Please save the original product packaging in case you need to safely transport
your wine refrigerator.

For Your Records:

Please write down the model number and serial number
below for future reference. Both numbers are located on the
ratings label on the back of your unit and are needed to
obtain warranty service. You may also want to staple your
receipt to this manual as it is the proof of your purchase, and
is also needed for service under your warranty.

Model Number:
Serial Number:
Date of Purchase:

To better serve you, please do the following before contacting customer service:

 If you received a damaged product, immediately contact the retailer or

dealer that sold you the product.

 Read and follow this instruction manual carefully to help you install, use

and maintain your wine refrigerator.

 Read the troubleshooting section of this manual as it will help you

diagnose and solve common issues.

 Visit us on the web at http://www.edgestar.com to register your

product, download product guides, additional troubleshooting resources
and up-to-date information.

 If you need warranty service, our friendly customer service

representatives are available via email at [e-mail] or by
telephone at 1 [phone].

1

Parts Identification

Back View

Front View

Product Label

Cabinet

Control Panel

Shelf

Stainless Steel Door

Lock

Front vent

Leveling foot

Small Shelf

Power Plug

Internal Fan

Carbon Filter

Top Right Hinge

Tip: Gather the model
and serial number
from the product label
and write them down
before installing the
wine refrigerator.

Door Handle

Note: The carbon filter
should be replaced
every 3-6 months
depending on the

unit’s exposure level

to odor. If the unit is
placed in the kitchen
regular replacement
every 3 months is
ideal.

EdgeStar Wine Refrigerator 2

Installing the Wine Refrigerator

The wine refrigerator should be installed in accordance with local
electrical code requirements. The wine refrigerator should also be placed
in a location that is strong enough to support its total weight, keeping in
mind that it will weigh substantially more when fully loaded than when

empty.

Before you plug the wine refrigerator into a power supply, be sure to let it

stand upright for at least 24 hours to allow the compressor’s oils to settle.

Unpacking the Wine Refrigerator

WARNING: Use two more people to move and install the wine
refrigerator. Failure to do so can result in back or other injury. Carefully
remove the packaging materials. Remove any shipping tape and glue
from your wine refrigerator before using. Do not use sharp instruments,
rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or

glue. These products can damage the surface of your wine refrigerator.

IMPORTANT: Do not remove any safety, warning, or product information

labels from your wine refrigerator.

Types of Installation

This wine refrigerator has been designed for free-standing, or built-in

installation. In every case, there must be adequate ventilation and access

for service.

Free-standing installation:

A free-standing installation will allow you to install the wine refrigerator in

almost any place you desire. You must follow the stated instructions for

electrical requirements, and leveling the wine refrigerator.

Built-in installation:

A recessed installation will allow you to install the beverage cooler under
a counter or in a kitchen cabinet provided the required clearance space

around the beverage cooler is followed.

It is necessary to allow adequate ventilation space around the unit (make
sure there is at least some ventilation room for the back of the unit). The

following additional items must be observed.

1. Place the wine refrigerator in front of the installation location. Adjust

the feet and place the unit flat on the floor or on a platform depending

on your installation requirements.

2. If the electrical outlet for the wine refrigerator is behind the cabinet,
plug in the wine refrigerator.

3. Push the wine refrigerator into position.

WARNING: Do NOT install the wine refrigerator behind a closed cabinet
door.

3