Page 1
Powerware® 9155 Single-phase UPS
Powerware 9355 Three-phase UPS
Product Focus
Powerful. Intelligent. Elegant.
8–15 kVA
Reliability and efficiency have
never looked so attractive.
Page 2
Product Introduction
Product Snapshot
Technology: 9155: Split-phase double-conversion
online UPS
9355: Three-phase double-conversion
online UPS
Power Rating: 9155: 8 kVA, 10 kVA, 12 kVA, 15 kVA
at 0.9 power factor
9355: 10 kVA and 15 kVA
at 0.9 power factor
Input Voltage: 9155: 200–240 Vac with Neutral or with
optional input isolation transformer
9355: 208V/120V or 220V/127V
Output Voltage: 9155: 100/200, 110/220, 120/240 Vac
180° phase displacement; 120/208,
127/220 Vac 120° phase displacement
9355: 208V/120V or 220V/127V
480:120V/208V or 600:120/208 with
input isolation transformer
(at 60 Hz only)
Frequency: 50/60 Hz auto-sensing
Dimensions: Two-high configuration:
32.2” H x 12.0” W x 32” D
Three-high configuration:
47.8” H x 12.0” W x 33.5” D
Configuration: Small-footprint tower, black
Battery Backup: 9155: Up to 29 minutes typical, extendable
up to four hours
9355: Up to 22 minutes typical, extendable
up to three hours
See Battery Back-up Times chart
Features
• Protects connected equipment from all nine of the most
common power problems with true online, double-conversion
topology
• Delivers maximum power density in a compact tower
design, only 12” wide and 33” deep, including batteries
• Provides more real wattage in less space with a 0.9 power
factor—protecting more equipment for every utility dollar,
and leaving more room for expansion
• Delivers extra capacity or redundancy through patented
Powerware Hot Sync
• Significantly increases battery life through microprocessorcontrolled ABM® technology
• Provides 0.99 power factor and generator friendly <5% total
harmonic distortion using an active IGBT rectifier to control the
input power factor
• Ensures data and system integrity with complete power man
agement software for remote monitoring, management, and
shutdown
• Provides investment protection and peace of mind with an
Eaton factory limited warranty, technical support, and optional
service plans
®
paralleling of multiple modules
With advances in miniaturization and processing power, a single
rack of equipment demands more power than ever—and more
equipment will be served by dual cord power supplies. It’s a challenge to provide power protection for expanding loads in shrinking spaces.
Fortunately, technology advancements have also raised the density per square foot of power protection systems. The Powerware
9155 and new Powerware 9355 uninterruptible power systems
(UPSs) deliver premium levels of efficiency, reliability and flexibility—all in a sleek tower half the size of most competitor units on
the market today.
These double-conversion, online UPSs resolve all nine common
utility power problems and supply clean, continuous power to
all connected equipment. Even when presented with the most
-
severe power problems, power output remains stable. And if the
utility power goes out altogether, there is no delay transferring to
backup power.
These capabilities make the Powerware 9155 and Powerware
9355 ideal for protecting essential data center, communications
and electrical engineering infrastructures in corporate, telecom,
healthcare, banking, public sector and industrial applications.
Page 3
Powerware 9155/Powerware 9355 shown in perspective.
Premium power protection is now easier than ever.
With raised-floor real estate at a premium, you will appreciate that
these UPSs are only 12” wide and 33” deep, including internal batteries. With such a small footprint, you have more location options,
and more space is available for future expansion.
Equipment installation is easy, essentially plug-and-play. You can
order either UPS with your choice of output receptacles with more
than 17 types. To change or move data center equipment, you simply unplug from the old receptacle, plug into a new one, and go.
No need for an electrician to run new conduit and wiring.
Scalable architecture meets current and future load
requirements.
Powerware 9155 UPSs are available in four models (8, 10, 12, and 15
kVA). Powerware 9355 UPSs come in 10 and 15 kVA models, so you
can choose the configuration that most closely meets your capacity
requirements and price point.
Powerware 9355 rear view with
optional output receptacles
And you can scale from there. Using our signature Powerware Hot
Sync paralleling technology, up to three (Powerware 9155) or up to
four (Powerware 9355) equivalent UPS modules can be paralleled
for extra capacity or redundancy. A 15 kVA UPS, for example, can
grow to support loads of up to 45 kVA. There’s no dependence on
communications wiring among those UPS modules.
Battery innovations optimize battery performance and
service life.
Standard internal batteries provide power until auxiliary power takes
over or systems are gracefully shut down. Battery runtime can be
extended to hours by adding matching Extended Battery Modules
(EBMs).
POWERWARE UPS BACKUP TIMES (IN MINUTES)
UPS (1) (2) (3) (4) UPS (1) (2) (3)
+ Internal EBM EBM EBM EBM + Internal EBM EBM EBM
VA Watt 32 Battery 64 64 64 64 64 Battery 96 96 96
15000 13500 4.6 23.0 43.0 65.1 88.6 13.3 43.0 76.7 113
14500 13050 4.9 24.1 45.2 68.3 93.0 14.1 45.2 80.5 119
14000 12600 5.2 25.2 47.3 71.5 97.4 14.9 47.3 84.2 125
13500 12150 5.5 26.4 49.4 74.7 102 15.8 49.4 88.1 130
13000 11700 5.8 27.6 51.6 78.1 106 16.7 51.6 92.0 136
12500 11250 6.1 28.8 54.0 81.6 111 17.6 54.0 96.2 142
12000 10800 6.5 30.2 56.5 85.5 116 18.6 56.5 101 149
11500 10350 6.9 31.6 59.3 89.7 122 19.2 59.3 106 156
11000 9900 7.3 33.3 62.4 94.4 129 20.2 62.4 111 164
10500 9450 7.8 35.1 65.9 99.6 136 21.4 65.9 117 174
10000 9000 8.4 37.2 69.8 106 144 22.6 69.8 124 184
9500 8550 9.1 39.6 74.2 112 153 24.1 74.2 132 196
9000 8100 9.9 42.3 79.4 120 163 25.7 79.4 141 209
8500 7650 10.8 45.5 85.2 129 175 27.6 85.2 152 225
8000 7200 11.9 49.1 91.9 139 189 29.8 91.9 164 242
7500 6750 13.1 53.2 99.7 151 205 32.3 99.7 178 263
7000 6300 14.6 58.0 109 164 224 35.2 109 194 286
6500 5850 16.3 63.5 119 180 245 38.6 119 212 314
6000 5400 18.4 70.0 131 198 270 42.5 131 234 346
5500 4950 20.1 77.6 145 220 300 47.2 145 259 383
5000 4500 22.4 86.6 162 245 334 52.6 162 289 428
4500 4050 25.2 97.4 182 276 376 59.2 182 325 4000 3600 28.6 110 207 313 426 67.1 207 369 3500 3150 32.8 127 238 359 - 77.0 238 423 3000 2700 38.3 148 277 418 - 89.7 277 - 2500 2250 45.6 176 329 - - 107 329 - -
Note: Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc.
Page 4
Front view
Powerware 9155/Powerware 9355 EBM
Rear view
After 15 years of in-service experience, Eaton
has real-world proof that ABM technology
can significantly increase battery service life.
Powerware 9155 and Powerware 9355 UPSs also use sophisticated
technologies that maximize the health and service life of batteries:
• ABM technology uses a unique three-stage charging technique that
significantly extends battery service life and optimizes recharge
time, compared to traditional trickle charging.
• Temperature-compensated charging monitors battery temperature
and adjusts the charge rate accordingly, which properly charges
the battery and greatly extends battery life.
• An integrated battery management system tests and monitors bat-
tery health and remaining lifetime, and provides advance notification to guide preventive maintenance.
Unlike heavy, old-style batteries, Eaton's are easily field-replaceable.
One person, working alone, can replace a battery without disrupting
data center operations or power to protected equipment.
Powerware Hot Sync Redundant/Capacity
Advanced design delivers unequaled power
performance.
The innovative design of these UPSs deliver the industry’s best performance combination of efficiency, input current distortion, input
power factor, and output power factor.
Lower costs, lower temperatures. High efficiency (greater than 90
percent across all load ranges) reduces utility costs, extends battery
runtimes, and produces cooler operating conditions.
Generator-friendly design. Total input harmonic distortion (THD)
remains below five percent without compromising overall efficiency. The result is maximum transfer of power between source
and protected load, and exceptional compatibility with auxiliary
generators.
More real power. On the output side, high power factor enables
these UPSs to provide their full power capability to modern IT
equipment that may have a wide range of leading and lagging
power factors. And, with a 0.99 input power factor, these UPSs
avoid the disturbances that energy converters tend to cause.
Inside view of Powerware 9155
Parallel Cabinet
Powerware 9155 UPS
Parallel Cabinet
Load
Page 5
Protect your investment
Rest easy, knowing that your UPS is always on
the job.
While it protects your critical systems, the UPS itself is protected in
several ways:
Self-diagnosis. The UPS constantly monitors its own operation, such
as voltage, temperature or function of internal elements—and sends
alarms or takes action if it detects a potential problem. You’ll know
your UPS is always performing up to specifications to protect your
equipment.
Self-correction. If it senses an issue—planned or unplanned—the
UPS instantly transfers the power path to a bypass source, with zero
interruption in power. When the alarm condition passes, the UPS
automatically reverts from bypass to normal operation.
Remote monitoring. You can have Eaton specialists securely monitor your Powerware 9155 and Powerware 9355 UPSs around the
clock with eNotify service, or you can monitor your own UPSs over
your LAN or the Internet. Either way, you’ll always be informed
about conditions in your power protection infrastructure.
Redundancy. Using Powerware Hot Sync technology, you can
configure up to N+3 redundancy. Any module can serve as backup
for any other, with no interruption or downtime. For instance, you
could perform full maintenance on any UPS without having to
remove any loads from conditioned power.
Most other paralleling systems on the market use a top-down configuration; if the master fails, the subsidiary units fail. With Eaton’s
patented approach, each UPS module is independent yet synchronized with the others. There is no single point of failure.
Have central control and visibility of UPS systems.
The Powerware 9155 and Powerware 9355 are shipped with a CD
that includes Powerware LanSafe
and a 30-day trial version of Powerware PowerVision® UPS performance analysis and monitoring software. Using an intuitive, graphical interface and SNMP (Simple Network Management Protocol),
administrators can:
TM
power management software
Connectivity options offer maximum flexibility.
The standard unit is equipped with an RS-232 serial port to communicate with power management software. You can customize your
UPS by adding one or two interface cards for other applications:
Monitor the UPS from anywhere. Connect the UPS to the Ethernet
network and Internet for secure monitoring and management using
a standard Web browser or SNMP.
ConnectUPSTM Web/SNMP Card
Interwork with your existing Building Management System.
A Modbus® Card enables real-time monitoring of UPS systems
through a Building Management System or Industrial Automation
System.
Modbus Card
Gather information from relay contact devices. Provide a dry-con
tact interface between the UPS and any relay-connected device,
including the IBM® e-server® iSeries and a variety of industrial
applications.
Relay Interface Card
Independently manage diverse servers. A Multi-Server card enables
up to six serially connected devices of mixed operating systems to
be independently managed and controlled by a single UPS.
-
Powerware Software
Suite
• Securely monitor UPS and battery performance over your existing
Ethernet network and the Internet.
• Establish prioritized shutdown of network devices and client/serv
er applications.
• Test all networked UPS systems from one node.
• Analyze trends and network conditions.
• Stay informed of potential power problems by pager and e-mail.
Multi-Server Card
Monitor environmental conditions.
Monitoring Probe remotely monitors temperature, humidity, and
two user-supplied contacts/sensors, such as smoke and intrusion
detection.
-
Environmental
Monitoring Probe
An optional Environmental
Page 6
Gain peace of mind with industry-leading warranty
and service plans.
We are so confident about the performance and reliability of the
Powerware 9155 and Powerware 9355 UPSs and battery systems
that we back them with extensive warranty and service plans.
all-inclusive packages with unique features, such as advanced
remote monitoring with trending, customized capacity planning
reports, and power protection audits. Add your choice of guaranteed
response times, and you can tailor just the right support package for
your needs.
Warranty coverage. Gain the peace of mind that comes with factory
warranty coverage (parts and labor, UPS and batteries) and rapid
response from certified support engineers.
From Eaton—a global leader in power quality solutions.
The culmination of 40 years of R&D excellence, the Powerware 9155
and Powerware 9355 UPSs deliver confidence, and ensure that your
organization’s critical electronics are protected by the most reliable,
Powerware 9155
efficient, and full-featured protection available.
• 2 year limited factory warranty
• 10 year pro-rated warranty
• $250,000 load protection guarantee
Eaton is a global leader in power quality and management solutions—the #1 manufacturer of UPSs above 5000 VA (Frost & Sullivan:
World UPS Markets, 2004). Eaton’s Power Quality Solutions Operation
Powerware 9355
is headquartered in Raleigh, North Carolina, U.S.
• 1 year Service Protection Plan
• 7 x 24 emergency response
• On-site start-up support (8 hours/day, 5 days/week)
• 3 year battery warranty
• 1 year eNotify remote monitoring
For more information on the Powerware 9155 and the new
Powerware 9355 UPS:
www.powerware.com
1-800-356-5794
Service plans. Beyond the warranty period, service plans are avail-
able to match any need—from basic UPS and/or battery support to
Powerware 9155 and Powerware 9355 at-a-glance
MODEL SELECTION TABLE - POWERWARE 9155 UPS (8–15 kVA)
Power Unit
Rating
Order Number
1
Description (kVA/W) Connection4 Receptacles H x W x D (in) (lb)
K408110000 PW9155 Model 8 - 32 Battery (2-high) 8kVA / 7.2kW Hardwired See PDM chart 32.2 x 12.0 x 32.0 352
K408120000 PW9155 Model 8 - 64 Battery (3-high) 8kVA / 7.2kW Hardwired See PDM chart 47.8 x 12.0 x 32.0 590
K408130000 PW9155 Model 8 - 32 Battery with Transformer (3-high) 8kVA / 7.2kW Hardwired See PDM chart 47.8 x 12.0 x 32.0 558
K410110000 PW9155 Model 10 - 32 Battery (2- high) 10kVA / 9kW Hardwired See PDM chart 32.2 x 12.0 x 32.0 352
K410120000 PW9155 Model 10 - 64 Battery (3- high) 10kVA / 9kW Hardwired See PDM chart 47.8 x 12.0 x 32.0 590
K410130000 PW9155 Model 10 - 32 Battery with Transformer (3-high) 10kVA / 9kW Hardwired See PDM chart 47.8 x 12.0 x 32.0 558
K412110000 PW9155 Model 12 - 32 Battery (2-high) 12kVA / 10.8kW Hardwired See PDM chart 32.2 x 12.0 x 32.0 352
K412120000 PW9155 Model 12 - 64 Battery (3-high) 12kVA / 10.8kW Hardwired See PDM chart 47.8 x 12.0 x 32.0 590
K412130000 PW9155 Model 12 - 32 Battery with Transformer (3-high) 12kVA / 10.8kW Hardwired See PDM chart 47.8 x 12.0 x 32.0 558
K415110000 PW9155 Model 15 - 32 Battery (2- high) 15kVA / 13.5kW Hardwired See PDM chart 32.2 x 12.0 x 32.0 352
K415120000 PW9155 Model 15 - 64 Battery (3- high) 15kVA / 13.5kW Hardwired See PDM chart 47.8 x 12.0 x 32.0 590
K415130000 PW9155 Model 15 - 32 Battery with Transformer. (3- high) 15kVA / 13.5kW Hardwired See PDM chart 47.8 x 12.0 x 32.0 558
1. 50/60 Hz auto-sensing. All models can be used for frequency/phase conversion with derated 80% load, please refer to manual for details.
2. Input voltage 200–240V with neutral or with optional input isolation transformer. Output voltages are user-selectable 100/200, 110/220, 120/240 Vac 180° phase displacement, or 120/208, 127/220 Vac 120° phase displacement.
3. Weight is installed weight, add 47lbs (2-high models) or 50lbs (3-high models) to determine shipping weight.
4. An input neutral is required for all configurations unless the input isolation transformer is used.
MODEL SELECTION TABLE - POWERWARE 9355 UPS (10–15 kVA)
Power Unit
Rating
Order Number
1
Description (kVA/W) Voltages4 Backup5 H x W x D (in) (lb)
KA1011100000010 PW9355 with 32-Battery (2-high) 10 kVA / 9kW 208/208 8 32.2 x 12.8 x 33.5 373
KA1012100000010 PW9355 with 64-Battery (3-high) 10 kVA / 9kW 208/208 22 47.8 x 12.8 x 33.5 609
KA1011200000010 PW9355 with 32-Battery (2-high) 10 kVA / 9kW 220/2202 8 32.2 x 12.8 x 33.5 373
KA1012200000010 PW9355 with 64-Battery (3-high) 10 kVA / 9kW 220/220
KA1011400000010 PW9355 with 32-Battery with Transformer (3-high) 10 kVA / 9kW 480/208 8 47.8 x 12.8 x 33.5 577
KA1011600000010 PW9355 with 32-Battery with Transformer (3-high) 10 kVA / 9kW 600/208 8 47.8 x 12.8 x 33.5 57
KA1511100000010 PW9355 with 32-Battery (2-high) 15 kVA / 13.5kW 208/208 4 32.2 x 12.8 x 33.5 373
KA1512100000010 PW9355 with 64-Battery (3-high) 15 kVA / 13.5kW 208/208 13 47.8 x 12.8 x 33.5 609
KA1511200000010 PW9355 with 32-Battery (2-high) 15 kVA / 13.5kW 220/220
KA1512200000010 PW9355 with 64-Battery (3-high) 15 kVA / 13.5kW 220/220
KA1511400000010 PW9355 with 32-Battery with Transformer (3-high) 15 kVA / 13.5kW 480/208 4 47.8 x 12.8 x 33.5 577
KA1511600000010 PW9355 with 32-Battery with Transformer (3-high) 15 kVA / 13.5kW 600/208 4 47.8 x 12.8 x 33.5 577
1. 50/60 Hz auto-sensing.
2. 220V units are wye connected 220/127V input and 220/127V output, 3-phase, 4-wire plus ground.
3. Weight is installed weight, add 47 pounds (for 2-high models) or 50 pounds (for 3-high models) to determine shipping weight.
4. An input neutral is required for all configurations unless the input isolation transformer is used.
5. Internal battery, full load.
2
Input & Output Output Dimensions Weight3
2
Input & Output Battery Dimensions Weight3
2
22 47.8 x 12.8 x 33.5 609
2
4 32.2 x 12.8 x 33.5 373
2
13 47.8 x 12.8 x 33.5 609
Page 7
ACCESSORIES
Order Number Description Dimensions H x W x D (in) Unit Weight
(lb)
Powerware Hot Sync
124100017-001 Powerware 9155 Parallel Cabinet 24.0 x 20.3 x 2.2 57.3
103004336 Powerware HotSync CAN Bridge Card - -
Notes: Up to three Powerware 9155 UPS and up to four Powerware 9355 UPS (available Fall 2005) UPSs can be paralleled with the Parallel Cabinet. Each Powerware 9155 UPS and Powerware 9355 UPS must have a
Powerware Hot Sync CAN Bridge Card installed in the second X-Slot communication bay.
Extended Battery Module (EBM)
103004192-5501 Powerware 9155 and Powerware 9355 EBM 64 (2-high) 32.2 x 12.0 x 30.2 480
103004193-5501 Powerware 9155 and Powerware 9355 EBM 96 (3-high) 47.8 x 12.0 x 30.2 710
Notes: up to four EBM 64 cabinets or three EBM 96 cabinets can be added to each UPS for extended runtime.
Seismic Mounting Kit
103004194-5501 Seismic Kit, Rated Zone 4, UL Tested, Performance rating Fits both 2- 136
based on NEBS GR-63-CORE Standard Vibration Test & 3-high models
Powerware 9155 Maintenance Bypass Module (MBM)
103004184-5501 UPS-Mounted, Maintenance Bypass Module 16.5 x 12.0 x 7.0 15
BPE14MBB1A Wall-mounted, Maintenance Bypass Module 21.0 x 14.0 x 6.75 31
Powerware 9155 Parallel System Start Up
OSTUP9155P15KCX Powerware 9155 8-10 kVA 2 or 3 Unit Parallel
OSTUP9155P10KCX Powerware 9155 12-15 kVA 2 or 3 Unit Parallel
103004626 Powerware 9155 Parallel System 2 unit upgrade kit (includes Can Bridge Cards, Procedures, and Parallel User's Guide)
103004627 Powerware 9155 Parallel System 3 unit upgrade kit (includes Can Bridge Cards, Procedures, and Parallel User's Guide)
Connectivity Options
103002974-5501 ConnectUPS-X Web/SNMP/xHub Card
05146288-5501 ConnectUPS-MX SNMP/Modem Card (9155 only)
103002510-5501 Modbus Card
05146508-5501 USB Card
05146447-5501 Multi-Server Card (9155 only)
1018460 Relay Interface Card (AS/400 Compatible)
103003055 Industrial Relay Card
103003637-5501 Environmental Probe (requires ConnectUPS Web/SNMP card)
Spare Parts
106711155 Powerware 9155 Spare Parts Kit "A"
106711169 Powerware 9355 Spare Parts Kit "A"
Upgrades
103004195 Powerware 9155 8 kVA to Powerware 9155 10 kVA
103004196 Powerware 9155 12 kVA to Powerware 9155 15 kVA
103004657
Powerware 9355 10 kVA to Powerware 9355 15 kVA
Power Distribution Module (PDM) with Mechanical Bypass Switch
Optional Receptacle Panels Breaker Voltage Phase
(1) L15-30R 30A 208V 3
(1) L21-20R 20A 208/120V 3
(1) L21-30R 30A 208/120V 3
(2) 5-15R 15A 120V 1
(2) 5-20R 20A 120V 1
(2) 6-15R 15A 208V 2
(2) 6-20R 20A 208V 2
(2) L5-15R 15A 120V 1
(1) L5-20R1 20A 120V 1
1
(1) L5-30R
30A 120V 1
(2) L6-15R 15A 208V 2
1
(1) L6-20R
(1) L6-30R
(1) L14-20R
(1) L14-30R
20A 208V 2
1
30A 208V 2
1
20A 120/208V 2
1
30A 120/208V 2
(2) IEC 320 C13 (120V) 20A 120V 1
(2) IEC 320 C19 (120V) 20A 120V 1
Blank panel
Note: Maximum of eight panels per PDM (Powerware 9155). Maximum of four panels per PDM (Powerware 9355).
1. The combined quantities of single-locking receptacle panels must not exceed five per PDM.
Page 8
POWERWARE 9355 UPS SERVICE CHART
Coverage
or Response
Start-up Warranty Upgrades Time Item #
Service Protection Plan Upgrades 4 hr SP41A
2 hr SP21A
Warranty PowerTrust
upgrade for first year of service only 4 hr PP41B
TM
Service Plan Upgrade 8 hr PP81B
2 hr PP21B
Start-up Services Upgrade (5x8 to 7x24) 7x24 SU97A
Recertification/Restart 7x24 RC07N
Unit +
Internal
Service Plan Contracts Battery EBM 64 EBM 96
PowerTrust ULTRA
PowerTrust ULTRA
TM
Service Plan (Premium)
TM
Service Plan (7x24) parts and labor coverage, annual 7x24 UPS
preventative maintenance, battery parts & labor coverage, eNotify remote UPS
and battery monitoring - must be connected; 30% discount on upgrades and T&M;
includes 1 complete battery update every 6 year period):
8 hr Response PU81N PU81N-BA6 PU81N-BA9
4 hr Response PU81N PU81N-BA6 PU81N-BA9
2 hr Response PU21N PU21N-BA6 PU21N-BA9
PowerTrust
PowerTrust
tery preventative maintenance, eNotify remote UPS and battery monitoring; 15%
discount on upgrades):
8 hr Response PT82N
4 hr Response PT42N
TM
Service Plan (Premium)
TM
Service Plan (7x24 parts and labor coverage, annual 5x8 UPS and bat-
2 hr Response PT22N
PowerTrust
PowerTrust
response, annual 5x8 UPS preventative maintenance, eNotify remote UPS and battery
monitoring):
TM
VALUE Service Plan
TM
VALUE Service Plan (5x8 parts and labor coverage, next business day
PVN3N
3 Year Battery Labor Coverage
Adds labor and freight to 3YR battery parts warranty:
BL87N
Unit +
Internal
Preventative Battery EBM 64 EBM 96
Battery Preventive Maintenance
Priced per VRLA cabinet:
5x8 coverage 0006N-BIN 0006N-BAG 0006N-BAG
7x24 coverage 0005-BIN 0005N-BAT 0005N-BAG
UPS Preventive Maintenance
5x8 coverage 0006N
7x24 coverage 0005N
POWERWARE 9155 UPS WARRANTY AND SERVICE CHART
Limited On-Site
Factory On-Site Gold Plan
Service Plan Features Warranty Gold Plan Plus
Service plan terms available 2 Yr 2, 3, 5 Yr 2, 3, 5
90 days on-site labor (5x8);
two years parts coverage
On-site startup of UPS and
batteries, 7/24
On-site corrective
maintenance, 7x24
Full coverage of UPS and internal
battery module
7x24 technical telephone
support
Service
priority
Full coverage of extended
battery modules
One 7x24 annual preventive
maintenance inspection
Service included
Optional service
POWERWARE 9155 UPS
(ON-SITE SERVICE IS 24 HOURS A DAY, 7 DAYS A WEEK)
ON-SITE GOLD ON-SITE GOLD PLUS
Part Number Part Number
Powerware 9155 UPS (8–10 kVA)
2 Yr 2OSGX915510KVCX 2OSGP915510KVCX
3 Yr 3OSGX915510KVCX 3OSGP915510KVCX
5 Yr 5OSGX915510KVCX 5OSGP915510KVCX
Powerware 9155 UPS (12–15 kVA)
2 Yr 2OSGX915515KVCX 2OSGP915515KVCX
3 Yr 3OSGX915515KVCX 3OSGP915515KVCX
5 Yr 5OSGX915515KVCX 5OSGP915515KVCX
POWERWARE 9155 UPS EXTENDED BATTERY MODULES
(ON-SITE SERVICE IS 24 HOURS A DAY, 7 DAYS A WEEK)
ON-SITE GOLD ON-SITE GOLD PLUS
Part Number Part Number
Powerware 9155 EBM 64
2 Yr 2OSGX9155EB64CX 2OSGP9155EB64CX
3 Yr 3OSGX9155EB64CX 3OSGP9155EB64CX
5 Yr 5OSGX9155EB64CX 5OSGP9155EB64CX
Powerware 9155 EBM 96
2 Yr 2OSGX9155EB96CX 2OSGP9155EB96CX
3 Yr 3OSGX9155EB96CX 3OSGP9155EB96CX
5 Yr 5OSGX9155EB96CX 5OSGP9155EB96CX
Yr
POWERWARE 9155 UPS PARALLEL SYSTEM
(ON-SITE SERVICE IS 24 HOURS A DAY, 7 DAYS A WEEK)
ON-SITE GOLD ON-SITE GOLD PLUS
Part Number Part Number
Powerware 9155 UPS (8-10 kVA) 2 Unit Parallel System
2 Yr 2OSGX915510P2CX 2OSGP915510P2CX
3 Yr 3OSGX915510P2CX 3OSGP915510P2CX
5 Yr 5OSGX915510P2CX 5OSGP915510P2CX
Powerware 9155 UPS (8-10 kVA) 3 Unit Parallel System
2 Yr 2OSGX915510P3CX 2OSGP915515P3CX
3 Yr 3OSGX915510P3CX 3OSGP915515P3CX
5 Yr 5OSGX915510P3CX 5OSGP915515P3CX
Powerware 9155 UPS (12-15 kVA) 2 Unit Parallel System
2 Yr 2OSGX915515P2CX 2OSGP915515P2CX
3 Yr 3OSGX915515P2CX 3OSGP915515P2CX
5 Yr 5OSGX915515P2CX 5OSGP915515P2CX
Powerware 9155 UPS (12-15 kVA) 3 Unit Parallel System
2 Yr 2OSGX915515P3CX 2OSGP915515P3CX
3 Yr 3OSGX915515P3CX 3OSGP915515P3CX
5 Yr 5OSGX915515P3CX 5OSGP915515P3CX
Page 9
Four button graphical LCD
X-Slot Communication Bay #1
X-Slot Communication Bay #2
DB-9 Communication Port
Internal batteries on slide out
with backlight
Fans
Signal Input 1
Signal Input 2
REPO (normally open)
REPO (normally closed)
Relay Contact
trays (field-replaceable)
Front view of 3-high module with
cover off
TECHNICAL SPECIFICATIONS
1
Power
Ratings (kVA/Watts)
9155: 8, 10, 12 and 15 kVA at 0.9 power factor
9355: 10 and 15 kVA at 0.9 power factor
Topology True double-conversion online UPS
Electrical Input
Nominal Input Voltage
9155: 200V-240V with neutral or with optional
input transformer
9355: 208V/120V or 220V/127V three phase
Input Voltage Range -15%, +10% from nominal at 100% load without
depleting battery
Operating Frequency 50/60 Hz (45 to 65 Hz)
Input Power Factor P.F >0.99 typical, >0.96 frequency converter
Input Current Distortion 5% THD
Electrical Output
Nominal Output Voltage
9155: 100/200, 110/220, 120/240 Vac 180° phase
displacement; 120/208, 127/220 Vac 120° phase
displacement
9355: 208/120, 220/127 Vac
Output Voltage Regulation ±1% Static; ±5% dynamic at 100% resistive load
change, <1 ms response time
Efficiency
9155: 90% typical
9355: 91% typical
Battery
Battery Type 9Ah, sealed, lead-acid, maintenance-free
Battery Runtime See Battery Runtime Chart
Battery Replacement Field-replaceable
Charger Default is 3.4A per battery string. Charger current is
configurable from 0.5A to 25A per string with an
overall maximum of 34A (limited by input current)
Start-On-Battery Allows start of UPS without utility input
General
Diagnostics Full system self-test at startup
UPS Bypass Automatic on overload or UPS failure
Parallel for Redundancy Yes, using Powerware Hot Sync technology
and Capacity
Dimensions and Weights See Model Selection Table
Overload 150% for 5 sec / 125% for 1 min (online),
(Normal Operation) 110% for 10 min
Communications
LCD Display Graphical LCD with blue backlight
LEDs (4) LEDs for notice and alarm
Audible Alarms Yes
Communication Ports (1) RS-232, (1) relay contact, (1) REPO,
(2) environmental input
Communication Slot (2) X-Slot communication bays
Power Management Bundled Software Suite CD
Software
Environmental
Operating Temperature 10ºC to +40ºC, +45ºC with 7.5% derating;
Batteries recommended max. +25ºC
Storage Temperature -15ºC to +25ºC
Relative Humidity 0–95%, non condensing
Audible Noise
9155: Audible Noise: < 53 dBA at 1 meter
(noise less room) typical
9355: Audible Noise: < 56 dBA at 1 meter
(noise less room) typical
Altitude < 1000m at +40°C, < 3000m at +25°C
Certifications
Safety Certifications
9155: NOM-0190SCFI-1993, UL 1778, CSA C22.2, No. 107.3;
EN 5502 Class A (CISPR22 Class A) and IEC 60950;
IEC 62040-1-1
9355: IEC 62040-1-1, IEC 60950, EN 62040-1-1, UL 1778
EMC Compliance
9155: IEC 62040-2, FCC Part 15, ICES-003, VCCI
9355: EN 50091-2 Class A
Quality ISO 9001: 2000 and ISO 14001:1996
Markings
9155: UL, cUL, CSA, CE and NOM-NYCE
9355: UL, cUL
1. Due to continuous product improvements, program specifications are subject to change without notice.
Page 10
UNITED STATES
8609 Six Forks Road
Raleigh, NC 27615 U.S.A.
Toll Free: 1.800.356.5794
or 919.872.3020
www.powerware.com
CANADA
Ontario: 416.798.0112
LATIN AMERICA
Argentina: 54.11.4343.6323
Brazil: 55.11.3616.8500
México: 52.55.5488.5252
EUROPE/MIDDLE EAST/AFRICA
Denmark: 45.3686.7910
Finland: 358.94.52.661
France: 33.1.6012.7400
Germany: 49.7841.666.0
Italy: 39.02.66.04.05.40
Norway: 47.23.03.65.50
Sweden: 46.8.598.940.00
United Kingdom: 44.1753.608.700
ASIA PACIFIC
Australia/NZ: 61.2.9878.5000
China: 86.21.6361.5599
HK/Korea/Taiwan: 852.2745.6682
India: 91.11.2649.9414 to 18
Singapore/SEA: 65.6829.8888
Powerware, ABM, ConnectUPS, LanSafe,
PowerVision, Powerware Hot Sync, and X-Slot
are trade names, trademarks, and/or service
marks of Eaton Power Quality Corporation or its
subsidiaries and affiliates. All other trademarks
are property of their respective owners.
© 2005 Eaton Corporation
All Rights Reserved
Printed in USA
9155/9355FXA
July 2005
Loading...