Dymo Rhino 6500 User Manual

FIXED

VERTICAL WRAP

Press V. WRAP

Select type of wire - COAX, press OK

Enter text: A101

Press PRINT

BACK OF PATCH

FLAG

ELECTRICAL

PANEL (#1)

PANEL

Create a Patch Panel.

Press FLAG

Set flag length: AUTO, press OK

Press LIBRARY

Select VOICE/DATA, press OK

Press L, select LAN, press OK

Press PRINT

4 6

Press TBLOCK

Set number of blocks: 6, and block size: 1.00”,

select DONE, press OK

Enter text: Bedroom 1, Press ENTER, Hallway

Press + to move to next breaker label

Enter text: Kitchen

Repeat steps 4 – 5 until all breakers are labeled

Press PRINT

(see Patch Panel steps 1 – 6 on page 7)

Press SHIFT + PPANEL +

Set # of copies to 1

Press PRINT

8 10

A/V DISTRIBUTION PANEL

Press PPANEL

Select port distance: 1.50” and # of ports: 3,

Set DONE, press OK

Enter text: MSTR BDRM

Press + one time to move to the next connector

Repeat steps 3 – 4 until first three ports are labeled

Press INSERT + , select insert

next label to the right, press OK

Repeat steps 3 – 6 until all ports are labeled

Press PRINT select all

TERMINAL BLOCK

Press TBLOCK

Set # of blocks: 8, and block size: 0.20”,

select DONE, press OK

Enter text: T01

Press SERIAL

Select 1 to be serialized, press OK

Set the increment: 1 and # of serializations: 8,

press OK

Press PRINT

LENGTH

Press FIXED

Set the label length: 3.50”, press OK

Enter text: 120 Volts

Press PRINT

RHINO 6500

P R O F E S S I O N A L L A B E L I N G T O O L S

QUICK REFERENCE GUIDE

HORIZONTAL WRAP

Press H. WRAP +

Set label length: AUTO, press OK

Enter text: Bedroom 1 - CATV

Press PRINT

WIRE LABELS

SELF LAMINATING

Press SELF-LAM +

Set label length: AUTO, press OK

Type text: A101

Press PRINT

PATCH PANEL

Press PPANEL

Set port distance: 0.60” and # of ports: 6 (# of ports

grouped together), select DONE, press OK

Enter text: A01

Press SERIAL

Select 1 to be serialized, press OK

Set increment: 1 and # of serializations: 12 (total # of

ports), press OK, select DONE, press OK

Press PRINT select all

PANEL LABELS

BACK OF PATCH PANEL (#2)

Press PPANEL

Set port distance: 1.25”, # of ports: 3, select DONE, press OK

Enter text: A01, press ENTER, A02

Press ADV. SER. +

Select SIMULTANEOUS, press OK

Select 1 to be the first character to be

serialized, press OK

Select 2 to be the second character to

be serialized

Set increment: 2 and # of serializations: 3, press OK

Press SHIFT + PPANEL

Set # of copies to 1, press PRINT

, press OK

MODULE

Press MODULE

Set fuse length: 0.70”, # of modules: 3, multipliers: module 1, multiplier 1, module 2, multiplier 1, module 3, multiplier 2, select DONE, press OK

Enter text: Bar

Press + one time to move to the next module

Repeat steps 3 – 4 until all modules are labeled

Press PRINT

110 TERMINAL

VERTICAL

BLOCK

Press PPANEL

Set port distance: 1.20” and # of ports: 6,

select DONE, press OK

Enter text: 10-110, press ENTER, 20-110

Press ADV. SER. +

Select SIMULTANEOUS, press OK

Select the first character to

be serialized, press OK

Select the second character to

be serialized, press OK

Set increment: 1 and

# of serializations: 6, press OK

Press PRINT

TERMINAL BLOCK LABELS

Press VERTICAL

Select label length: AUTO, press OK

Enter text: RACK3

Press PRINT

GENERAL PURPOSE LABELS

QUICK TIPS

Auto Cutter SETTINGS > Autocutter = ON / OFF

Label Settings SETTINGS > Current Label Configuration

CLR Key

Returns to general mode & clears all text, formats, and font settings

Navigation

Arrows Moves to next / previous label = SHIFT + LEFT / RIGHT ARROWS

Numeral Selections

TOP / BOTTOM ARROWS (Press and hold for faster speed) Enter number

Printing

Multiple prints = SHIFT + PRINT Feed the tape = SHIFT + CUT

Insert/Remove Labels

Insert labels = SHIFT + SAVE Remove labels = SHIFT + RECALL

Save/Recall Labels

Save labels = SAVE Recall labels = RECALL

Serialization

Simple (A1 A2 A3) = SERIAL Simultaneous (A1 B2 C3) = SHIFT + SERIAL > Simultaneous Advanced (A1 A2 B1 B2 C1 C2) = SHIFT + SERIAL > Advanced

Technical Support: (203) 588-2500